Date: Tue, 7 Feb 2012 03:27:19 GMT From: Johnny Sun <johnny@interpro.com.hk> To: freebsd-gnats-submit@FreeBSD.org Subject: misc/164838: Precompile package smartmontools-5.42_2 is not working properly in 9.0-RELEASE-i386 Message-ID: <201202070327.q173RJLK090243@red.freebsd.org> Resent-Message-ID: <201202070330.q173U9j3020952@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 164838 >Category: misc >Synopsis: Precompile package smartmontools-5.42_2 is not working properly in 9.0-RELEASE-i386 >Confidential: no >Severity: non-critical >Priority: low >Responsible: freebsd-bugs >State: open >Quarter: >Keywords: >Date-Required: >Class: sw-bug >Submitter-Id: current-users >Arrival-Date: Tue Feb 07 03:30:09 UTC 2012 >Closed-Date: >Last-Modified: >Originator: Johnny Sun >Release: 9.0-RELEASE-i386 >Organization: >Environment: FreeBSD server1.local 9.0-RELEASE FreeBSD 9.0-RELEASE #0: Tue Jan 3 07:15:25 UTC 2012 root@obrian.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC i386 >Description: When install smartmontools via pkg_add -r smartmontools The software is not working properly. However if it is install via port tree, the software will working without problem. Only happen in i386 version. AMD64 does not have problems. >How-To-Repeat: server1# pkg_add -r smartmontools Fetching ftp://ftp.freebsd.org/pub/FreeBSD/ports/i386/packages-9.0-release/Latest/smartmontools.tbz... Done. smartmontools has been installed To check the status of drives, use the following: /usr/local/sbin/smartctl -a /dev/ad0 for first ATA/SATA drive /usr/local/sbin/smartctl -a /dev/da0 for first SCSI drive /usr/local/sbin/smartctl -a /dev/ada0 for first SATA drive To include drive health information in your daily status reports, add a line like the following to /etc/periodic.conf: daily_status_smart_devices="/dev/ad0 /dev/da0" substituting the appropriate device names for your SMART-capable disks. To enable drive monitoring, you can use /usr/local/sbin/smartd. A sample configuration file has been installed as /usr/local/etc/smartd.conf.sample Copy this file to /usr/local/etc/smartd.conf and edit appropriately To have smartd start at boot echo 'smartd_enable="YES"' >> /etc/rc.conf server1# /usr/local/sbin/smartctl -a /dev/ada0 smartctl 5.42 2011-10-20 r3458 [FreeBSD 9.0-RELEASE i386] (local build) Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net error sending CAMIOCOMMAND ioctl: Inappropriate ioctl for device Unable to get CAM device list /dev/ada0: Unable to detect device type Smartctl: please specify device type with the -d option. Use smartctl -h to get a usage summary server1# pkg_delete smartmontools-5.42_2 ===> Stopping smartd ... server1# cd /usr/ports/sysutils/smartmontools/ server1# make install clean > /dev/null smartmontools-5.42.tar.gz 100% of 724 kB 166 kBps server1# /usr/local/sbin/smartctl -a /dev/ada0 smartctl 5.42 2011-10-20 r3458 [FreeBSD 9.0-RELEASE i386] (local build) Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Model Family: Hitachi Deskstar 7K2000 Device Model: Hitachi HDS722020ALA330 Serial Number: <Deleted-by-me> LU WWN Device Id: 5 000cca 221e82bfc Firmware Version: JKAOA3EA User Capacity: 2,000,398,934,016 bytes [2.00 TB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: 8 ATA Standard is: ATA-8-ACS revision 4 Local Time is: Fri Feb 3 14:12:57 2012 HKT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (23212) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 255) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 65536 2 Throughput_Performance 0x0005 132 132 054 Pre-fail Offline - 105 3 Spin_Up_Time 0x0007 132 132 024 Pre-fail Always - 564 (Average 532) 4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 25 5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0 7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0 8 Seek_Time_Performance 0x0005 119 119 020 Pre-fail Offline - 36 9 Power_On_Hours 0x0012 099 099 000 Old_age Always - 9712 10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 25 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 341 193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always - 341 194 Temperature_Celsius 0x0002 146 146 000 Old_age Always - 41 (Min/Max 23/48) 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0 SMART Error Log Version: 0 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 8907 - # 2 Short offline Completed without error 00% 5332 - # 3 Short offline Completed without error 00% 2763 - # 4 Short offline Completed without error 00% 149 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. server1# uname -i -p -v FreeBSD 9.0-RELEASE #0: Tue Jan 3 07:15:25 UTC 2012 root@obrian.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC i386 GENERIC >Fix: Recompile the software from ports tree and update to package >Release-Note: >Audit-Trail: >Unformatted:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201202070327.q173RJLK090243>