Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 7 Feb 2012 03:27:19 GMT
From:      Johnny Sun <johnny@interpro.com.hk>
To:        freebsd-gnats-submit@FreeBSD.org
Subject:   misc/164838: Precompile package smartmontools-5.42_2 is not working properly in 9.0-RELEASE-i386
Message-ID:  <201202070327.q173RJLK090243@red.freebsd.org>
Resent-Message-ID: <201202070330.q173U9j3020952@freefall.freebsd.org>

next in thread | raw e-mail | index | archive | help

>Number:         164838
>Category:       misc
>Synopsis:       Precompile package smartmontools-5.42_2 is not working properly in 9.0-RELEASE-i386
>Confidential:   no
>Severity:       non-critical
>Priority:       low
>Responsible:    freebsd-bugs
>State:          open
>Quarter:        
>Keywords:       
>Date-Required:
>Class:          sw-bug
>Submitter-Id:   current-users
>Arrival-Date:   Tue Feb 07 03:30:09 UTC 2012
>Closed-Date:
>Last-Modified:
>Originator:     Johnny Sun
>Release:        9.0-RELEASE-i386
>Organization:
>Environment:
FreeBSD server1.local 9.0-RELEASE FreeBSD 9.0-RELEASE #0: Tue Jan  3 07:15:25 UTC 2012     root@obrian.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC  i386

>Description:
When install smartmontools via 

pkg_add -r smartmontools

The software is not working properly.  However if it is install via port tree, the software will working without problem.  Only happen in i386 version.  AMD64 does not have problems.
>How-To-Repeat:
server1# pkg_add -r smartmontools
Fetching ftp://ftp.freebsd.org/pub/FreeBSD/ports/i386/packages-9.0-release/Latest/smartmontools.tbz... Done.

smartmontools has been installed

To check the status of drives, use the following:

        /usr/local/sbin/smartctl -a /dev/ad0    for first ATA/SATA drive
        /usr/local/sbin/smartctl -a /dev/da0    for first SCSI drive
        /usr/local/sbin/smartctl -a /dev/ada0   for first SATA drive

To include drive health information in your daily status reports,
add a line like the following to /etc/periodic.conf:
        daily_status_smart_devices="/dev/ad0 /dev/da0"
substituting the appropriate device names for your SMART-capable disks.

To enable drive monitoring, you can use /usr/local/sbin/smartd.
A sample configuration file has been installed as
/usr/local/etc/smartd.conf.sample
Copy this file to /usr/local/etc/smartd.conf and edit appropriately

To have smartd start at boot
        echo 'smartd_enable="YES"' >> /etc/rc.conf

server1# /usr/local/sbin/smartctl -a /dev/ada0
smartctl 5.42 2011-10-20 r3458 [FreeBSD 9.0-RELEASE i386] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net

error sending CAMIOCOMMAND ioctl: Inappropriate ioctl for device
Unable to get CAM device list
/dev/ada0: Unable to detect device type
Smartctl: please specify device type with the -d option.

Use smartctl -h to get a usage summary

server1# pkg_delete smartmontools-5.42_2
===> Stopping smartd ...
server1# cd /usr/ports/sysutils/smartmontools/
server1# make install clean  > /dev/null
smartmontools-5.42.tar.gz                     100% of  724 kB  166 kBps
server1# /usr/local/sbin/smartctl -a /dev/ada0
smartctl 5.42 2011-10-20 r3458 [FreeBSD 9.0-RELEASE i386] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF INFORMATION SECTION ===
Model Family:     Hitachi Deskstar 7K2000
Device Model:     Hitachi HDS722020ALA330
Serial Number:    <Deleted-by-me>
LU WWN Device Id: 5 000cca 221e82bfc
Firmware Version: JKAOA3EA
User Capacity:    2,000,398,934,016 bytes [2.00 TB]
Sector Size:      512 bytes logical/physical
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   8
ATA Standard is:  ATA-8-ACS revision 4
Local Time is:    Fri Feb  3 14:12:57 2012 HKT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82) Offline data collection activity
                                        was completed without error.
                                        Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0) The previous self-test routine completed
                                        without error or no self-test has ever
                                        been run.
Total time to complete Offline
data collection:                (23212) seconds.
Offline data collection
capabilities:                    (0x5b) SMART execute Offline immediate.
                                        Auto Offline data collection on/off support.
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        No Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine
recommended polling time:        (   1) minutes.
Extended self-test routine
recommended polling time:        ( 255) minutes.
SCT capabilities:              (0x003d) SCT Status supported.
                                        SCT Error Recovery Control supported.
                                        SCT Feature Control supported.
                                        SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000b   100   100   016    Pre-fail  Always       -       65536
  2 Throughput_Performance  0x0005   132   132   054    Pre-fail  Offline      -       105
  3 Spin_Up_Time            0x0007   132   132   024    Pre-fail  Always       -       564 (Average 532)
  4 Start_Stop_Count        0x0012   100   100   000    Old_age   Always       -       25
  5 Reallocated_Sector_Ct   0x0033   100   100   005    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000b   100   100   067    Pre-fail  Always       -       0
  8 Seek_Time_Performance   0x0005   119   119   020    Pre-fail  Offline      -       36
  9 Power_On_Hours          0x0012   099   099   000    Old_age   Always       -       9712
 10 Spin_Retry_Count        0x0013   100   100   060    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       25
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       341
193 Load_Cycle_Count        0x0012   100   100   000    Old_age   Always       -       341
194 Temperature_Celsius     0x0002   146   146   000    Old_age   Always       -       41 (Min/Max 23/48)
196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0022   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0008   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x000a   200   200   000    Old_age   Always       -       0

SMART Error Log Version: 0
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%      8907         -
# 2  Short offline       Completed without error       00%      5332         -
# 3  Short offline       Completed without error       00%      2763         -
# 4  Short offline       Completed without error       00%       149         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

server1# uname -i -p -v
FreeBSD 9.0-RELEASE #0: Tue Jan  3 07:15:25 UTC 2012     
root@obrian.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC  i386 GENERIC
>Fix:
Recompile the software from ports tree and update to package

>Release-Note:
>Audit-Trail:
>Unformatted:



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201202070327.q173RJLK090243>