Date: Tue, 2 Dec 2008 16:03:58 -0800 From: Ji <lijimlee@gmail.com> To: Mel <fbsd.questions@rachie.is-a-geek.net> Cc: freebsd-questions@freebsd.org Subject: Re: mount problem after enabling serial console Message-ID: <8fd8f02c0812021603y4d6f2f7ehdac338c5f01e4cc9@mail.gmail.com> In-Reply-To: <200812020910.38815.fbsd.questions@rachie.is-a-geek.net> References: <8fd8f02c0812012241t2a8517c5n5e5f69d965795b07@mail.gmail.com> <200812020826.21345.fbsd.questions@rachie.is-a-geek.net> <8fd8f02c0812012352y6b4aca89v6d7b1355c3ab95f@mail.gmail.com> <200812020910.38815.fbsd.questions@rachie.is-a-geek.net>
next in thread | previous in thread | raw e-mail | index | archive | help
Thank you again, Mel.
I could not find BIOS has an "Enhanced" or "AHCI" setting for the disk
controllers.
Also attached please find the booting message without serial enabled
and with serial enabled.
(The kernel configuration file is the original GENERIC for FBSD7 amd64)
=============== dmesg without enabling serial console ===================
Copyright (c) 1992-2008 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.0-RELEASE #0: Sun Feb 24 10:35:36 UTC 2008
root@driscoll.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Xeon(R) CPU E3110 @ 3.00GHz (3000.23-MHz K8-class CPU)
Origin = "GenuineIntel" Id = 0x10676 Stepping = 6
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x8e3fd<SSE3,RSVD2,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,<b19>>
AMD Features=0x20100800<SYSCALL,NX,LM>
AMD Features2=0x1<LAHF>
Cores per package: 2
usable memory = 2133360640 (2034 MB)
avail memory = 2058694656 (1963 MB)
ACPI APIC Table: <DELL PE_SC3 >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ioapic0: Changing APIC ID to 2
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
hptrr: HPT RocketRAID controller driver v1.1 (Feb 24 2008 10:34:18)
acpi0: <DELL PE_SC3> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
cpu0: <ACPI CPU> on acpi0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 613091f06000613
device_attach: est0 attach returned 6
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 613091f06000613
device_attach: est1 attach returned 6
p4tcc1: <CPU Frequency Thermal Control> on cpu1
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
em0: <Intel(R) PRO/1000 Network Connection Version - 6.7.3> port
0xece0-0xecff mem 0xdfbc0000-0xdfbdffff,0xdfbe0000-0xdfbfffff irq 16
at device 0.0 on pci1
em0: Using MSI interrupt
em0: Ethernet address: 00:15:17:37:11:06
em0: [FILTER]
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib2
em1: <Intel(R) PRO/1000 Network Connection Version - 6.7.3> port
0xdce0-0xdcff mem 0xdfcc0000-0xdfcdffff,0xdfce0000-0xdfcfffff irq 16
at device 0.0 on pci2
em1: Using MSI interrupt
em1: Ethernet address: 00:15:17:36:19:d4
em1: [FILTER]
pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0
pci3: <ACPI PCI bus> on pcib3
bge0: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev.
0x4201> mem 0xdfdf0000-0xdfdfffff irq 16 at device 0.0 on pci3
miibus0: <MII bus> on bge0
brgphy0: <BCM5750 10/100/1000baseTX PHY> PHY 1 on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
bge0: Ethernet address: 00:1e:c9:ff:58:48
bge0: [ITHREAD]
pcib4: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0
pci4: <ACPI PCI bus> on pcib4
bge1: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev.
0x4201> mem 0xdfef0000-0xdfefffff irq 17 at device 0.0 on pci4
miibus1: <MII bus> on bge1
brgphy1: <BCM5750 10/100/1000baseTX PHY> PHY 1 on miibus1
brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
bge1: Ethernet address: 00:1e:c9:ff:58:49
bge1: [ITHREAD]
uhci0: <UHCI (generic) USB controller> port 0xbc60-0xbc7f irq 21 at
device 29.0 on pci0
uhci0: [GIANT-LOCKED]
uhci0: [ITHREAD]
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0xbc80-0xbc9f irq 20 at
device 29.1 on pci0
uhci1: [GIANT-LOCKED]
uhci1: [ITHREAD]
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
uhci2: <UHCI (generic) USB controller> port 0xbca0-0xbcbf irq 21 at
device 29.2 on pci0
uhci2: [GIANT-LOCKED]
uhci2: [ITHREAD]
usb2: <UHCI (generic) USB controller> on uhci2
usb2: USB revision 1.0
uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
uhub2: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xdfaffc00-0xdfafffff
irq 21 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb3: EHCI version 1.0
usb3: companion controllers, 2 ports each: usb0 usb1 usb2
usb3: <EHCI (generic) USB 2.0 controller> on ehci0
usb3: USB revision 2.0
uhub3: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb3
uhub3: 6 ports with 6 removable, self powered
umass0: <Sony DRX-810UL, class 0/0, rev 2.00/1.00, addr 2> on uhub3
uhub4: <vendor 0x04b4 product 0x6560, class 9/0, rev 2.00/0.0b, addr 3> on uhub3
uhub4: multiple transaction translators
uhub4: 4 ports with 4 removable, self powered
pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci5: <ACPI PCI bus> on pcib5
vgapci0: <VGA-compatible display> port 0xcc00-0xccff mem
0xd0000000-0xd7ffffff,0xdfff0000-0xdfffffff irq 19 at device 5.0 on
pci5
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH9 SATA300 controller> port
0xbc30-0xbc37,0xbc28-0xbc2b,0xbc38-0xbc3f,0xbc2c-0xbc2f,0xbc40-0xbc4f,0xbc50-0xbc5f
irq 23 at device 31.2 on pci0
atapci0: [ITHREAD]
ata2: <ATA channel 0> on atapci0
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
ata3: [ITHREAD]
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: does not respond
device_attach: fdc0 attach returned 6
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio0: [FILTER]
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: does not respond
device_attach: fdc0 attach returned 6
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
orm0: <ISA Option ROMs> at iomem
0xc0000-0xc8fff,0xc9000-0xc9fff,0xca000-0xcb7ff,0xec000-0xeffff on
isa0
ppc0: cannot reserve I/O port range
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 1.000 msec
hptrr: no controller detected.
ad4: 76293MB <WDC WD800AAJS-18TDA1 01.00A04> at ata2-master SATA300
SMP: AP CPU #1 Launched!
cd0 at umass-sim0 bus 0 target 0 lun 0
cd0: <SONY DVD RW DRU-810A 2.0e> Removable CD-ROM SCSI-0 device
cd0: 40.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
Trying to mount root from ufs:/dev/ad4s1a
========problematic booting After enabling serial (copied from serial
console)==============
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.0-RELEASE #0: Sun Feb 24 10:35:36 UTC 2008
root@driscoll.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Xeon(R) CPU E3110 @ 3.00GHz (3000.22-MHz K8-class CPU)
Origin = "GenuineIntel" Id = 0x10676 Stepping = 6
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x8e3fd<SSE3,RSVD2,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,<b19>>
AMD Features=0x20100800<SYSCALL,NX,LM>
AMD Features2=0x1<LAHF>
Cores per package: 2
usable memory = 2133360640 (2034 MB)
avail memory = 2058747904 (1963 MB)
kbd1 at kbdmux0
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
hptrr: HPT RocketRAID controller driver v1.1 (Feb 24 2008 10:34:18)
cpu0 on motherboard
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 613091f06000613
device_attach: est0 attach returned 6
p4tcc0: <CPU Frequency Thermal Control> on cpu0
pcib0: <Host to PCI bridge> pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pcib1: <PCI-PCI bridge> irq 15 at device 1.0 on pci0
pci1: <PCI bus> on pcib1
em0: <Intel(R) PRO/1000 Network Connection Version - 6.7.3> port
0xece0-0xecff mem 0xdfbc0000-0xdfbdffff,0xdfbe0000-0xdfbfffff irq 15
at device 0.0 on pci1
em0: Unable to allocate bus resource: interrupt
em0: Allocation of PCI resources failed
device_attach: em0 attach returned 6
pcib2: <PCI-PCI bridge> irq 15 at device 28.0 on pci0
pci2: <PCI bus> on pcib2
em1: <Intel(R) PRO/1000 Network Connection Version - 6.7.3> port
0xdce0-0xdcff mem 0xdfcc0000-0xdfcdffff,0xdfce0000-0xdfcfffff irq 15
at device 0.0 on pci2
em1: Unable to allocate bus resource: interrupt
em1: Allocation of PCI resources failed
device_attach: em1 attach returned 6
pcib3: <PCI-PCI bridge> irq 15 at device 28.4 on pci0
pci3: <PCI bus> on pcib3
bge0: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev.
0x4201> mem 0xdfdf0000-0xdfdfffff irq 15 at device 0.0 on pci3
bge0: couldn't map interrupt
device_attach: bge0 attach returned 6
pcib4: <PCI-PCI bridge> irq 14 at device 28.5 on pci0
pci4: <PCI bus> on pcib4
bge1: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev.
0x4201> mem 0xdfef0000-0xdfefffff irq 14 at device 0.0 on pci4
bge1: couldn't map interrupt
device_attach: bge1 attach returned 6
uhci0: <UHCI (generic) USB controller> port 0xbc60-0xbc7f irq 11 at
device 29.0 on pci0
uhci0: Could not allocate irq
device_attach: uhci0 attach returned 6
uhci1: <UHCI (generic) USB controller> port 0xbc80-0xbc9f irq 10 at
device 29.1 on pci0
uhci1: Could not allocate irq
device_attach: uhci1 attach returned 6
uhci2: <UHCI (generic) USB controller> port 0xbca0-0xbcbf irq 11 at
device 29.2 on pci0
uhci2: Could not allocate irq
device_attach: uhci2 attach returned 6
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xdfaffc00-0xdfafffff
irq 11 at device 29.7 on pci0
ehci0: Could not allocate irq
device_attach: ehci0 attach returned 6
pcib5: <PCI-PCI bridge> at device 30.0 on pci0
pci5: <PCI bus> on pcib5
vgapci0: <VGA-compatible display> port 0xcc00-0xccff mem
0xd0000000-0xd7ffffff,0xdfff0000-0xdfffffff irq 5 at device 5.0 on
pci5
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH9 SATA300 controller> port
0xbc30-0xbc37,0xbc28-0xbc2b,0xbc38-0xbc3f,0xbc2c-0xbc2f,0xbc40-0xbc4f,0xbc50-0xbc5f
irq 6 at device 31.2 on pci0
atapci0: unable to map interrupt
device_attach: atapci0 attach returned 6
orm0: <ISA Option ROMs> at iomem
0xc0000-0xc8fff,0xc9000-0xc9fff,0xca000-0xcb7ff,0xec000-0xeffff on
isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
fdc0: cannot reserve interrupt line
ppc0: cannot reserve I/O port range
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x30 on isa0
sio0: type 16550A, console
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 3000222630 Hz quality 800
Timecounters tick every 1.000 msec
hptrr: no controller detected.
Trying to mount root from ufs:/dev/ad4s1a
Manual root filesystem specification:
<fstype>:<device> Mount <device> using filesystem <fstype>
eg. ufs:da0s1a
? List valid disk boot devices
<empty line> Abort manual input
mountroot> ?
List of GEOM managed disk devices:
Manual root filesystem specification:
<fstype>:<device> Mount <device> using filesystem <fstype>
eg. ufs:da0s1a
? List valid disk boot devices
<empty line> Abort manual input
mountroot> ufs:/dev/ad4s1a
Trying to mount root from ufs:/dev/ad4s1a
Manual root filesystem specification:
<fstype>:<device> Mount <device> using filesystem <fstype>
eg. ufs:da0s1a
? List valid disk boot devices
<empty line> Abort manual input
mountroot>
panic: Root mount failed, startup aborted.
cpuid = 0
Uptime: 1s
Cannot dump. No dump device defined.
Automatic reboot in 15 seconds - press a key on the console to abort
--> Press a key on the console to reboot,
--> or switch off the system now.
Rebooting...
========normal booting after enabling serial (copied from serial
console)===============
Copyright (c) 1992-2008 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.0-RELEASE #0: Sun Feb 24 10:35:36 UTC 2008
root@driscoll.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Xeon(R) CPU E3110 @ 3.00GHz (3000.22-MHz K8-class CPU)
Origin = "GenuineIntel" Id = 0x10676 Stepping = 6
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x8e3fd<SSE3,RSVD2,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,<b19>>
AMD Features=0x20100800<SYSCALL,NX,LM>
AMD Features2=0x1<LAHF>
Cores per package: 2
usable memory = 2133360640 (2034 MB)
avail memory = 2058694656 (1963 MB)
ACPI APIC Table: <DELL PE_SC3 >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ioapic0: Changing APIC ID to 2
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
hptrr: HPT RocketRAID controller driver v1.1 (Feb 24 2008 10:34:18)
acpi0: <DELL PE_SC3> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
cpu0: <ACPI CPU> on acpi0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 613091f06000613
device_attach: est0 attach returned 6
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 613091f06000613
device_attach: est1 attach returned 6
p4tcc1: <CPU Frequency Thermal Control> on cpu1
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
em0: <Intel(R) PRO/1000 Network Connection Version - 6.7.3> port
0xece0-0xecff mem 0xdfbc0000-0xdfbdffff,0xdfbe0000-0xdfbfffff irq 16
at device 0.0 on pci1
em0: Using MSI interrupt
em0: Ethernet address: 00:15:17:37:11:06
em0: [FILTER]
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib2
em1: <Intel(R) PRO/1000 Network Connection Version - 6.7.3> port
0xdce0-0xdcff mem 0xdfcc0000-0xdfcdffff,0xdfce0000-0xdfcfffff irq 16
at device 0.0 on pci2
em1: Using MSI interrupt
em1: Ethernet address: 00:15:17:36:19:d4
em1: [FILTER]
pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0
pci3: <ACPI PCI bus> on pcib3
bge0: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev.
0x4201> mem 0xdfdf0000-0xdfdfffff irq 16 at device 0.0 on pci3
miibus0: <MII bus> on bge0
brgphy0: <BCM5750 10/100/1000baseTX PHY> PHY 1 on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
bge0: Ethernet address: 00:1e:c9:ff:58:48
bge0: [ITHREAD]
pcib4: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0
pci4: <ACPI PCI bus> on pcib4
bge1: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev.
0x4201> mem 0xdfef0000-0xdfefffff irq 17 at device 0.0 on pci4
miibus1: <MII bus> on bge1
brgphy1: <BCM5750 10/100/1000baseTX PHY> PHY 1 on miibus1
brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
bge1: Ethernet address: 00:1e:c9:ff:58:49
bge1: [ITHREAD]
uhci0: <UHCI (generic) USB controller> port 0xbc60-0xbc7f irq 21 at
device 29.0 on pci0
uhci0: [GIANT-LOCKED]
uhci0: [ITHREAD]
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0xbc80-0xbc9f irq 20 at
device 29.1 on pci0
uhci1: [GIANT-LOCKED]
uhci1: [ITHREAD]
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
uhci2: <UHCI (generic) USB controller> port 0xbca0-0xbcbf irq 21 at
device 29.2 on pci0
uhci2: [GIANT-LOCKED]
uhci2: [ITHREAD]
usb2: <UHCI (generic) USB controller> on uhci2
usb2: USB revision 1.0
uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
uhub2: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xdfaffc00-0xdfafffff
irq 21 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb3: EHCI version 1.0
usb3: companion controllers, 2 ports each: usb0 usb1 usb2
usb3: <EHCI (generic) USB 2.0 controller> on ehci0
usb3: USB revision 2.0
uhub3: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb3
uhub3: 6 ports with 6 removable, self powered
umass0: <Sony DRX-810UL, class 0/0, rev 2.00/1.00, addr 2> on uhub3
uhub4: <vendor 0x04b4 product 0x6560, class 9/0, rev 2.00/0.0b, addr 3> on uhub3
uhub4: multiple transaction translators
uhub4: 4 ports with 4 removable, self powered
pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci5: <ACPI PCI bus> on pcib5
vgapci0: <VGA-compatible display> port 0xcc00-0xccff mem
0xd0000000-0xd7ffffff,0xdfff0000-0xdfffffff irq 19 at device 5.0 on
pci5
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH9 SATA300 controller> port
0xbc30-0xbc37,0xbc28-0xbc2b,0xbc38-0xbc3f,0xbc2c-0xbc2f,0xbc40-0xbc4f,0xbc50-0xbc5f
irq 23 at device 31.2 on pci0
atapci0: [ITHREAD]
ata2: <ATA channel 0> on atapci0
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
ata3: [ITHREAD]
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: does not respond
device_attach: fdc0 attach returned 6
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x30 on acpi0
sio0: type 16550A, console
sio0: [FILTER]
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: does not respond
device_attach: fdc0 attach returned 6
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
orm0: <ISA Option ROMs> at iomem
0xc0000-0xc8fff,0xc9000-0xc9fff,0xca000-0xcb7ff,0xec000-0xeffff on
isa0
ppc0: cannot reserve I/O port range
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 1.000 msec
hptrr: no controller detected.
ad4: 76293MB <WDC WD800AAJS-18TDA1 01.00A04> at ata2-master SATA300
SMP: AP CPU #1 Launched!
cd0 at umass-sim0 bus 0 target 0 lun 0
cd0: <SONY DVD RW DRU-810A 2.0e> Removable CD-ROM SCSI-0 device
cd0: 40.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
Trying to mount root from ufs:/dev/ad4s1a
Loading configuration files.
kernel dumps on /dev/ad4s3b
Entropy harvesting: interrupts ethernet point_to_point kickstart.
swapon: adding /dev/ad4s3b as swap device
Starting file system checks:
/dev/ad4s1a: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ad4s1a: clean, 12820246 free (58710 frags, 1595192 blocks, 0.4%
fragmentation)
Setting hostuuid: 44454c4c-3400-1053-8059-b7c04f484831.
Setting hostid: 0x0188e958.
Mounting local file systems:.
Setting hostname: .fastsoft.com.
net.inet6.ip6.auto_linklocal: 1 -> 0
bge0: link state changed to DOWN
bge0: no link .....bge0: link state changed to UP
got link
DHCPREQUEST on bge0 to 255.255.255.255 port 67
DHCPACK from 172.16.0.22
bound to 172.16.1.16 -- renewal in 345600 seconds.
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x5
inet6 ::1 prefixlen 128
inet 127.0.0.1 netmask 0xff000000 b
bge0: flags=884g3<UP,BROADCAST,ReUNNING,SIMPLEX,M1ULTICAST> metric: 0 mtu 1500
op tions=9b<RXCSUM,lTXCSUM,VLAN_MTU,iVLAN_HWTAGGING,VnLAN_HWCSUM>
etkher 00:1e:c9:ff: 58:48
inet 172s.16.1.16 netmaskt 0xffff0000 broaadcast 172.16.255t.255
media: Etehernet autoselec t (1000baseTX <fcull-duplex>)
shtatus: active
aAdditional routinng options:.
Stgarting devd.
ed to UP
hw.acpi.cpu.cx_lowest: C1
sysctl: hw.acpi.cpu.cx_lowest: Invalid argument
Additional IP options:.
Mounting NFS file systems:.
Creating and/or trimming log files:.
Starting syslogd.
Checking for core dump on /dev/ad4s3b...
savecore: no dumps found
ELF ldconfig path: /lib /usr/lib /usr/lib/compat
32-bit compatibility ldconfig path:
Initial amd64 initialization:.
Additional ABI support:.
Clearing /tmp (X related).
Starting local daemons:.
Updating motd.
Mounting late file systems:.
Configuring syscons: blanktime.
Starting sshd.
Starting cron.
Local package initialization:.
Starting background file system checks in 60 seconds.
Tue Dec 2 16:58:50 UTC 2008
FreeBSD/amd64 (xxxxx) (ttyd0)
login:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?8fd8f02c0812021603y4d6f2f7ehdac338c5f01e4cc9>