From owner-freebsd-current Sun Apr 14 09:15:45 1996 Return-Path: owner-current Received: (from root@localhost) by freefall.freebsd.org (8.7.3/8.7.3) id JAA11808 for current-outgoing; Sun, 14 Apr 1996 09:15:45 -0700 (PDT) Received: from centauro.isr.uc.pt (centauro.isr.uc.pt [193.136.205.5]) by freefall.freebsd.org (8.7.3/8.7.3) with SMTP id JAA11491 for ; Sun, 14 Apr 1996 09:15:08 -0700 (PDT) Received: by centauro.isr.uc.pt (4.1/SMI-4.1) id AA14155; Sun, 14 Apr 96 17:14:42 +0100 Date: Sun, 14 Apr 1996 17:14:41 +0100 (WET DST) From: Paulo Menezes To: current@freebsd.org Subject: Another problem with Adaptec 2940 and S3TRIO64 Message-Id: Mime-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-current@freebsd.org X-Loop: FreeBSD.org Precedence: bulk Hi, Yesterday I installed 2.1R in a HP Vectra VL 5/100. I have noticed that the system hangs during periods of heavy disk activity, with or without X86_S3 running. After the second hang I rebooted the machine and started to compile knews just to see if there was any message and ..... ahc0: target 0, lun 0 (sd0) timed out sd0(ahc0:0:0): BUS DEVICE RESET message queued. sd0(ahc0:0:0): ABORTED COMMAND asc:4e,0 Overlapped commands attempted , retries:4 Can anyone tell me if this is related with my new hardware :-( ? Thanks Paulo ====================================================== FreeBSD 2.1.0-RELEASE #0: Sun Apr 14 03:55:07 1996 root@ener1000.dee.uc.pt:/usr/src/sys/compile/LOCAL CPU: 99-MHz Pentium 735\\90 or 815\\100 (Pentium-class CPU) Origin = "GenuineIntel" Id = 0x525 Stepping=5 Features=0x1bf real memory = 16777216 (16384K bytes) avail memory = 14827520 (14480K bytes) Probing for devices on the ISA bus: sc0 at 0x60-0x6f irq 1 on motherboard sc0: VGA color <16 virtual consoles, flags=0x0> ed0 not found at 0x280 ed1 at 0x300-0x31f irq 3 on isa ed1: address 00:80:c8:2b:86:be, type NE2000 (16 bit) sio0 at 0x3f8-0x3ff irq 4 on isa sio0: type 16550A sio1: disabled, not probed. lpt0 at 0x378-0x37f irq 7 on isa lpt0: Interrupt-driven port lp0: TCP/IP capable interface mse0: wrong signature ff mse0 not found at 0x23c psm0 at 0x60-0x63 irq 12 on motherboard fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa fdc0: NEC 72065B fd0: 1.44MB 3.5in wdc0 not found at 0x1f0 wdc1 not found at 0x170 bt0 not found at 0x330 uha0 not found at 0x330 ahc1 not found ahb0 not found aha0 not found at 0x330 aic0 not found at 0x340 nca0 not found at 0x1f88 nca1 not found at 0x350 sea0 not found wt0 not probed due to I/O address conflict with ed1 at 0x300 mcd0 not probed due to I/O address conflict with ed1 at 0x300 mcd1: timeout getting status mcd1 not found at 0x340 matcdc0 not found at 0x230 scd0 not found at 0x230 ep0 not probed due to I/O address conflict with ed1 at 0x300 npx0 on motherboard npx0: INT 16 interface pcibus_setup(1): mode1res=0x80000000 (0x80000000), mode2res=0xff (0x0e) pcibus_setup(2): mode1res=0x80000000 (0x80000000) pcibus_check: device 0 is there (id=122d8086) Probing for devices on the PCI bus: configuration mode 1 allows 32 devices. chip0 rev 2 on pci0:0 ahc0 rev 3 int a irq 9 on pci0:6 mapreg[10] type=1 addr=0000fc00 size=0100. mapreg[14] type=0 addr=fedff000 size=1000. ahc0: reading board settings ahc0: Reading SEEPROM...done. ahc0: 2940 Single Channel, SCSI Id=7, aic7870, 255 SCBs ahc0: Downloading Sequencer Program...Done ahc0: Probing channel A ahc0 waiting for scsi devices to settle ahc0: target 0 synchronous at 10.0MB/s, offset = 0xf (ahc0:0:0): "MICROP 4221-09SC21020AV TN05" type 0 fixed SCSI 2 sd0(ahc0:0:0): Direct-Access 1955MB (4004219 512 byte sectors) sd0(ahc0:0:0): with 4049 cyls, 9 heads, and an average 109 sectors/track vga0 rev 0 int a irq 255 on pci0:13 mapreg[10] type=0 addr=fe000000 size=800000. chip1 rev 2 on pci0:15 pci0: uses 8392704 bytes of memory from fe000000 upto fedfffff. pci0: uses 256 bytes of I/O space from fc00 upto fcff. changing root device to sd0a BIOS Geometries: 0:03fe3f20 0..1022=1023 cylinders, 0..63=64 heads, 1..32=32 sectors 0 accounted for sd0s1: type 0xa5, start 32, end = 4003839, size 4003808 : OK WARNING: / was not properly dismounted. ahc0: target 0, lun 0 (sd0) timed out sd0(ahc0:0:0): BUS DEVICE RESET message queued. sd0(ahc0:0:0): ABORTED COMMAND asc:4e,0 Overlapped commands attempted , retries:4