Date: Wed, 16 Jun 1999 13:37:49 -0400 From: Kevin Rooney <Kevin_Rooney@sw.cc.va.us> To: "'freebsd-questions@freebsd.org'" <freebsd-questions@freebsd.org> Subject: trouble mounting SCSI cd-rom Message-ID: <519E4F1A60BCD211AC6100805FEA7ACA03505F@SWCC2>
next in thread | raw e-mail | index | archive | help
Hi all,
I'm having trouble mounting a CD on my SCSI tower through adv0.
I'm using 3.1-RELEASE. Below is dmesg output including, at the end, the
command used and it's result (invalid arg). I can, however, mount the
same CD on the ATAPI cd drive.
Copyright (c) 1992-1999 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights
reserved.
FreeBSD 3.1-RELEASE #1: Fri Jun 11 13:43:31 EDT 1999
kev@des2.sw.cc.va.us:/usr/src/sys/compile/DES2
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 299942443 Hz
CPU: Pentium II (299.94-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x633 Stepping=3
Features=0x80f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CM
OV,MMX
>
real memory = 134217728 (131072K bytes)
avail memory = 127205376 (124224K bytes)
Preloaded elf kernel "kernel" at 0xf0338000.
Probing for devices on PCI bus 0:
chip0: <Host to PCI bridge (vendor=8086 device=7180)> rev 0x03 on
pci0.0.0
chip1: <PCI to PCI bridge (vendor=8086 device=7181)> rev 0x03 on
pci0.1.0
chip2: <Intel 82371AB PCI to ISA bridge> rev 0x01 on pci0.7.0
ide_pci0: <Intel PIIX4 Bus-master IDE controller> rev 0x01 on pci0.7.1
chip3: <Intel 82371AB Power management controller> rev 0x01 on pci0.7.3
adv0: <AdvanSys ASC3150 Ultra SCSI controller> rev 0x02 int a irq 9 on
pci0.14.0
adv0: AdvanSys Ultra SCSI Host Adapter, SCSI ID 7, queue depth 16
xl0: <3Com 3c905B Fast Etherlink XL 10/100BaseTX> rev 0x30 int a irq 10
on pci0.
15.0
xl0: Ethernet address: 00:50:04:0a:cd:56
xl0: autoneg complete, link status good (half-duplex, 10Mbps)
Probing for devices on PCI bus 1:
vga0: <VGA-compatible display device> rev 0x01 int a irq 9 on pci1.0.0
Probing for devices on the ISA bus:
sc0 on isa
sc0: VGA color <16 virtual consoles, flags=0x0>
ed0 not found at 0x280
fe0 not found at 0x300
atkbdc0 at 0x60-0x6f on motherboard
atkbd0 irq 1 on isa
psm0 irq 12 on isa
psm0: model IntelliMouse, device ID 3
sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: FIFO enabled, 8 bytes threshold
fd0: 1.44MB 3.5in
wdc0 at 0x1f0-0x1f7 irq 14 on isa
wdc0: unit 0 (wd0): <IBM-DHEA-38451>
wd0: 8063MB (16514064 sectors), 16383 cyls, 16 heads, 63 S/T, 512 B/S
wdc1 at 0x170-0x177 irq 15 on isa
wdc1: unit 0 (atapi): <TOSHIBA CD-ROM XM-6102B/1106>, removable, accel,
ovlap, d
ma, iordy
acd0: drive speed 4133 - 4134KB/sec, 256KB cache
acd0: supported read types: CD-R, CD-RW, CD-DA
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray
acd0: Medium: no/blank disc inside, unlocked
wt0 not found at 0x300
mcd0 not found at 0x300
matcdc0 not found at 0x230
scd0 not found at 0x230
ppc0 at 0x378 irq 7 on isa
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
nlpt0: <generic printer> on ppbus 0
nlpt0: Interrupt-driven port
ppi0: <generic parallel i/o> on ppbus 0
plip0: <PLIP network interface> on ppbus 0
ie0: unknown board_id: f000
ie0 not found at 0x300
ep0 not found at 0x300
ex0 not found
le0 not found at 0x300
lnc0 not found at 0x280
ze0 not found at 0x300
zp0 not found at 0x300
cs0 not found at 0x300
adv0 not found at 0x330
bt0 not found at 0x134
aha0 not found at 0x134
vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa
npx0 on motherboard
npx0: INT 16 interface
Waiting 15 seconds for SCSI devices to settle
changing root device to wd0s1a
cd0 at adv0 bus 0 target 0 lun 0
cd0: <TOSHIBA CD-ROM XM-4101TA 0064> Removable CD-ROM SCSI-2 device
cd0: 4.237MB/s transfers (4.237MHz, offset 15)
cd0: cd present [103188 x 2048 byte records]
cd1 at adv0 bus 0 target 1 lun 0
cd1: <TOSHIBA CD-ROM XM-4101TA 0064> Removable CD-ROM SCSI-2 device
cd1: 4.237MB/s transfers (4.237MHz, offset 15)
cd1: Attempt to query device size failed: NOT READY, Medium not present
cd2 at adv0 bus 0 target 2 lun 0
cd2: <TOSHIBA CD-ROM XM-4101TA 0064> Removable CD-ROM SCSI-2 device
cd2: 4.237MB/s transfers (4.237MHz, offset 15)
cd2: Attempt to query device size failed: NOT READY, Medium not present
cd3 at adv0 bus 0 target 3 lun 0
cd3: <TOSHIBA CD-ROM XM-4101TA 0064> Removable CD-ROM SCSI-2 device
cd3: 4.237MB/s transfers (4.237MHz, offset 15)
cd3: Attempt to query device size failed: NOT READY, Medium not present
cd4 at adv0 bus 0 target 4 lun 0
cd4: <TOSHIBA CD-ROM XM-4101TA 0064> Removable CD-ROM SCSI-2 device
cd4: 4.237MB/s transfers (4.237MHz, offset 15)
cd4: Attempt to query device size failed: NOT READY, Medium not present
cd5 at adv0 bus 0 target 5 lun 0
cd5: <TOSHIBA CD-ROM XM-4101TA 0064> Removable CD-ROM SCSI-2 device
cd5: 4.237MB/s transfers (4.237MHz, offset 15)
cd5: Attempt to query device size failed: NOT READY, Medium not present
cd6 at adv0 bus 0 target 6 lun 0
cd6: <TOSHIBA CD-ROM XM-4101TA 0064> Removable CD-ROM SCSI-2 device
cd6: 4.237MB/s transfers (4.237MHz, offset 15)
cd6: Attempt to query device size failed: NOT READY, Medium not present
des2# mount_cd9660 /dev/cd0a /cd0
mount_cd9660: Invalid argument
~Kevin Rooney
~Instructional Technologist
~Southwest Virginia Community College
~P.O. Box SVCC, Richlands, VA 24641
~Kevin_Rooney@sw.cc.va.us
~(540)964-7552
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?519E4F1A60BCD211AC6100805FEA7ACA03505F>