Date: Tue, 7 May 2002 09:49:14 -0500 (CDT) From: Jeff Kreska <jkreska@kreska.org> To: freebsd-questions@freebsd.org Subject: Help with panic trying to upgrade 4.2 -> 4.5 Message-ID: <Pine.BSF.4.21.0205070940130.5546-200000@shuttle.jeff.com>
next in thread | raw e-mail | index | archive | help
[-- Attachment #1 --]
I am trying to upgrade my 4.2 box with 4.5. I have an Advansys SCSI (isa)
controller and couldn't get it to boot the CD. So I typed boot -C at the
boot prompt. The system panics on me.
I was hoping someone could look at the panic and tell me what might be
causing the panic.
--
Later,
Jeff
[-- Attachment #2 --]
FreeBSD/i386 bootstrap loader, Revision 0.8
(jkh@bento.FreeBSD.org, Mon Nov 20 11:41:23 GMT 2000)
Loading /boot/defaults/loader.conf
/kernel text=0x2e70c3 data=0x5c058+0x2fd20 syms=[0x4+0x41bd0+0x4+0x46eae]
-
Hit [Enter] to boot immediately, or any other key for command prompt.
Booting [kernel] in 8 seconds...
Type '?' for a list of commands, 'help' for more detailed help.
ok boot -C
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.2-RELEASE #3: Mon Dec 3 18:19:50 CST 2001
root@deleted.com:/src/sys/compile/SHUTTLE_42
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium/P54C (166.61-MHz 586-class CPU)
Origin = "GenuineIntel" Id = 0x52c Stepping = 12
Features=0x1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8>
real memory = 67108864 (65536K bytes)
config> di sn0
config> di lnc0
config> di ie0
config> di fe0
config> di cs0
config> di bt0
config> di ata1
config> di ata0
config> di aic0
config> di aha0
config> q
avail memory = 60297216 (58884K bytes)
Preloaded elf kernel "kernel" at 0xc04fe000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc04fe0a8.
Intel Pentium detected, installing workaround for F00F bug
ccd0-3: Concatenated disk drivers
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
isab0: <Intel 82371SB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX3 ATA controller> port 0xf000-0xf00f at device 7.1 on pci0
ata1: at 0x170 irq 15 on atapci0
rl0: <RealTek 8139 10/100BaseTX> port 0x6100-0x61ff mem 0xe0000000-0xe00000ff ir
q 12 at device 10.0 on pci0
rl0: Ethernet address: 00:50:ba:43:3e:fd
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
adv0: AdvanSys SCSI Host Adapter, SCSI ID 7, queue depth 16
adv0 at port 0x330 irq 11 drq 7 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A, console
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ed0 at port 0x280-0x29f iomem 0xd8000 irq 10 on isa0
ed0: address 00:80:ad:0d:0e:6a, type NE2000 (16 bit)
pcm1: <OPTi931> at port 0x534-0x543,0x380-0x38b,0x220-0x22f,0xe0c-0xe0f irq 5 dr
q 0,1 on isa0
AD_WAIT_INIT FAILED 1002 0xff
IP packet filtering initialized, divert enabled, rule-based forwarding disabled,
default to accept, logging limited to 100 packets/entry by default
IPsec: Initialized Security Association Processing.
IP Filter: v3.4.8 initialized. Default = pass all, Logging = enabled
ad2: 19541MB <Maxtor 92049U4> [39703/16/63] at ata1-master WDMA2
Waiting 5 seconds for SCSI devices to settle
sa0 at adv0 bus 0 target 5 lun 0
sa0: <ARCHIVE Python 25501-XXX 2.50> Removable Sequential Access SCSI-CCS device
sa0: 3.300MB/s transfers
da1 at adv0 bus 0 target 1 lun 0
da1: <HP C3325A 5293> Fixed Direct Access SCSI-2 device
da1: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing Enabled
da1: 2069MB (4238836 512 byte sectors: 255H 63S/T 263C)
da2 at adv0 bus 0 target 3 lun 0
da2: <SEAGATE ST32151N 0590> Fixed Direct Access SCSI-2 device
da2: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing Enabled
da2: 2049MB (4197405 512 byte sectors: 255H 63S/T 261C)
da0 at adv0 bus 0 target 0 lun 0
da0: <SEAGATE ST32550N 0021> Fixed Direct Access SCSI-2 device
da0: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing Enabled
da0: 2047MB (4194058 512 byte sectors: 255H 63S/T 261C)
Mounting root from cd9660:cd0a
fault virtual address = 0x28
fault code = supervisor read, page not present
instruction pointer = 0x8:0xc01bcfab
stack pointer = 0x10:0xc0512d64
frame pointer = 0x10:0xc0512d88
code segment = base 0x0, limit 0xfffff, type 0x1b
= DPL 0, pres 1, def32 1, gran 1
processor eflags = interrupt enabled, resume, IOPL = 0
current pcd0 at adv0 bus 0 target 2 lun 0
cd0: <NEC CD-ROM DRIVE:463 1.05> Removable CD-ROM SCSI-2 device
cd0: 10.000MB/s transfers (10.000MHz, offset 15)
cd0: cd present [320722 x 2048 byte records]
rocess = 0 (swapper)
interrupt mask = none
trap number = 12
panic: page fault
syncing disks...
done
Uptime: 8s
Automatic reboot in 15 seconds - press a key on the console to abort
--> Press a key on the console to reboot <--
Rebooting...
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.21.0205070940130.5546-200000>