Date: Sun, 9 Apr 1995 20:48:41 -0400 From: "matthew c. mead" <mmead@goof.com> To: ti@bazooka.amb.org (Ti Kan) Cc: hackers@FreeBSD.org Subject: Re: xmcd 1.4 Message-ID: <199504100048.UAA02018@goof.com> In-Reply-To: Your message of Sun, April 9, 1995 10:09:31 -0700 References: <199504090147.VAA20761@goof.com> <9504091709.AA17782@bazooka.amb.org>
next in thread | previous in thread | raw e-mail | index | archive | help
On Sun, April 9, 1995 at 10:09:31 (-0700), Ti Kan wrote:
> > output to stderr:
> > CD audio: SCSI command fault on /dev/rcd0c:
> > Opcode=0x1a Status=0x0
> I suspect that you didn't set up xmcd correctly.
I've set it up on other hosts before, and had no problem.
> The xmcd run-time package is not just simply the executable file.
> There are other support files that need to be installed and configured
> properly in order to operate correctly. If you compiled xmcd on a
> different system you should generate a binary release by running the
> "misc.d/makerel.sh" script, move the resultant xmcdbin.tar.gz file
> to the target machine, gunzip it, un-tar it, then run the install.sh
> script to install it.
Hmm. I did configure it. Here's the output of a config, for which
it does not work (as stated above):
bash# ./configure.sh
Xmcd version 1.4 Device Configuration Program
Configuring SCSI CD-ROM drive 0...
Enter CD-ROM device path: [/dev/rcd0c]
CD-ROM drive (/dev/rcd0c) configuration
Please select the CD-ROM drive brand:
1. Apple
2. Chinon
3. Compaq
4. Creative Labs
5. DEC
6. Hitachi
7. IBM
8. Mitsumi
9. NEC
10. Panasonic/Matsushita/Kotobuki
11. Pioneer
12. Plextor/Texel
13. Procom
14. Sony
15. Sun
16. Toshiba
17. other (SCSI)
18. other (non-SCSI)
q. quit
Enter choice: 2
CD-ROM drive (/dev/rcd0c) configuration
Please select the Chinon CD-ROM drive model:
Model Mode
1. CDS-431 SCSI-1
2. CDX-431 SCSI-1
3. CDS-435 SCSI-1
4. CDX-435 SCSI-1
5. CDS-525 SCSI-2
6. CDX-525 SCSI-2
7. CDS-535 SCSI-2
8. CDX-535 SCSI-2
9. other SCSI
10. other non-SCSI
q. quit
Enter choice: 5
NOTE: This drive does not support these features:
- Software-controlled caddy load.
- The balance control.
Creating the /usr/X11R6/lib/X11/xmcd/config/rcd0c file...
Do you have more SCSI CD-ROM drives on your system? [n]
Xmcd set-up is now complete.
Please read the README file supplied with the xmcd
distribution for hardware configuration information
about specific CD-ROM drives.
bash#
Does it look like I did something wrong?
-matt
--
Matthew C. Mead -> Virginia Tech Center for Transportation Research -
-> Multiple Platform System and Network Administration
Work Related -> mmead@ctr.vt.edu | mmead@goof.com <- All Other
---- ------- WWW -> http://www.goof.com/~mmead --- -----
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199504100048.UAA02018>