Date: Wed, 18 Feb 2009 21:00:05 GMT From: dirk.meyer@dinoex.sub.org (Dirk Meyer) To: freebsd-multimedia@FreeBSD.org Subject: Re: kern/131785: [snd_hda] [panic] sysctl hw.snd.maxautovchans panics with snd_hda Message-ID: <200902182100.n1IL05F2072162@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
The following reply was made to PR kern/131785; it has been noted by GNATS. From: dirk.meyer@dinoex.sub.org (Dirk Meyer) To: bug-followup@FreeBSD.org, mav@FreeBSD.org Cc: Subject: Re: kern/131785: [snd_hda] [panic] sysctl hw.snd.maxautovchans panics with snd_hda Date: Wed, 18 Feb 2009 21:23:11 +0100 Sorry for the invalid email, fixed. Here the boot -v kind regards Dirk - Dirk Meyer, Im Grund 4, 34317 Habichtswald, Germany - [dirk.meyer@dinoex.sub.org],[dirk.meyer@guug.de],[dinoex@FreeBSD.org] http://people.freebsd.org/~dinoex/errorlogs/ Copyright (c) 1992-2009 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 8.0-CURRENT #5: Tue Feb 17 06:39:57 CET 2009 root@book64.dinoex.sub.de:/usr/obj/usr/src/sys/GENERIC WARNING: WITNESS option enabled, expect reduced performance. Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff80f87000. Preloaded elf obj module "/boot/kernel/acpi_ibm.ko" at 0xffffffff80f87328. Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 1995013728 Hz CPU: Intel(R) Pentium(R) Dual CPU T3200 @ 2.00GHz (1995.01-MHz K8-class CPU) Origin = "GenuineIntel" Id = 0x6fd Stepping = 13 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0xe39d<SSE3,DTES64,MON,DS_CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM> AMD Features=0x20100800<SYSCALL,NX,LM> AMD Features2=0x1<LAHF> TSC: P-state invariant Cores per package: 2 usable memory = 1016954880 (969 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009bfff, 634880 bytes (155 pages) 0x0000000000fb4000 - 0x000000003bb72fff, 985395200 bytes (240575 pages) 0x000000003d6b9000 - 0x000000003d7b1fff, 1019904 bytes (249 pages) 0x000000003d80f000 - 0x000000003d906fff, 1015808 bytes (248 pages) 0x000000003db0f000 - 0x000000003db17fff, 36864 bytes (9 pages) 0x000000003db1f000 - 0x000000003db52fff, 212992 bytes (52 pages) avail memory = 979968000 (934 MB) ACPI APIC Table: <PTLTD APIC > INTR: Adding local APIC 1 as a target FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 APIC: CPU 0 has ACPI ID 0 APIC: CPU 1 has ACPI ID 1 ULE: setup cpu 0 ULE: setup cpu 1 ACPI: RSDP @ 0x0xf7190/0x0024 (v 2 LENOVO) ACPI: XSDT @ 0x0x3dbf624e/0x006C (v 1 LENOVO TP-6G 0x00000000 LTP 0x00000000) ACPI: FACP @ 0x0x3dbe8000/0x00F4 (v 3 LENOVO TP-6G 0x00000001 ALAN 0x00000001) ACPI: DSDT @ 0x0x3dbe9000/0x693C (v 2 LENOVO TP-6G 0x00000001 INTL 0x20050624) ACPI: FACS @ 0x0x3db9efc0/0x0040 ACPI: HPET @ 0x0x3dbfcd86/0x0038 (v 1 LENOVO TP-6G 0x00000001 LOHR 0x0000005A) ACPI: MCFG @ 0x0x3dbfcdbe/0x003C (v 1 LENOVO TP-6G 0x00000001 LOHR 0x0000005A) ACPI: SLIC @ 0x0x3dbfcdfa/0x0176 (v 1 LENOVO TP-6G 0x00000001 TBD 0x00000001) ACPI: APIC @ 0x0x3dbfcf70/0x0068 (v 1 PTLTD APIC 0x00000000 LTP 0x00000000) ACPI: BOOT @ 0x0x3dbfcfd8/0x0028 (v 1 PTLTD $SBFTBL$ 0x00000000 LTP 0x00000001) ACPI: SSDT @ 0x0x3dbe7000/0x0655 (v 1 PmRef CpuPm 0x00003000 INTL 0x20050624) ACPI: SSDT @ 0x0x3dbe6000/0x0259 (v 1 PmRef Cpu0Tst 0x00003000 INTL 0x20050624) ACPI: SSDT @ 0x0x3dbe5000/0x020F (v 1 PmRef ApTst 0x00003000 INTL 0x20050624) MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000 ioapic0: Routing external 8259A's -> intpin 0 lapic0: Routing NMI -> LINT1 lapic0: LINT1 trigger: edge lapic0: LINT1 polarity: high lapic1: Routing NMI -> LINT1 lapic1: LINT1 trigger: edge lapic1: LINT1 polarity: high MADT: Interrupt override: source 0, irq 2 ioapic0: Routing IRQ 0 -> intpin 2 MADT: Interrupt override: source 9, irq 9 ioapic0: intpin 9 trigger: level ioapic0 <Version 2.0> irqs 0-23 on motherboard cpu0 BSP: ID: 0x00000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00010000 err: 0x00010000 pcm: 0x00000400 wlan: <802.11 Link Layer> null: <null device, zero device> random: <entropy source, Software, Yarrow> nfslock: pseudo-device kbd: new array size 4 kbd1 at kbdmux0 mem: <memory> io: <I/O> hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2 (Feb 17 2009 06:39:49) acpi0: <LENOVO TP-6G> on motherboard ACPI: Overriding _OS definition with "Windows 2006" PCIe: Memory Mapped configuration base @ 0xe0000000 ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 0 vector 48 acpi0: [MPSAFE] acpi0: [ITHREAD] acpi0: Power Button (fixed) AcpiOsDerivePciId: \\_SB_.PCI0.HBUS -> bus 0 dev 0 func 0 AcpiOsDerivePciId: \\_SB_.PCI0.RP01.J380.PCFG -> bus 2 dev 0 func 0 AcpiOsDerivePciId: \\_SB_.PCI0.LPCB.LPC0 -> bus 0 dev 31 func 0 AcpiOsDerivePciId: \\_SB_.PCI0.LPCB.LPC1 -> bus 0 dev 31 func 0 acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 acpi_hpet0: vend: 0x8086 rev: 0x1 num: 3 hz: 14318180 opts: legacy_route 64-bit Timecounter "HPET" frequency 14318180 Hz quality 900 ACPI timer: 0/3 1/2 0/3 0/3 0/3 0/3 0/3 0/3 0/3 0/3 -> 1 Timecounter "ACPI-safe" frequency 3579545 Hz quality 850 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 acpi_ec0: <Embedded Controller: GPE 0x1c> port 0x62,0x66 on acpi0 pci_link0: Index IRQ Rtd Ref IRQs Initial Probe 0 5 N 0 1 3 4 5 6 7 10 12 14 15 Validation 0 5 N 0 1 3 4 5 6 7 10 12 14 15 After Disable 0 255 N 0 1 3 4 5 6 7 10 12 14 15 pci_link1: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 1 3 4 5 6 7 11 12 14 15 Validation 0 11 N 0 1 3 4 5 6 7 11 12 14 15 After Disable 0 255 N 0 1 3 4 5 6 7 11 12 14 15 pci_link2: Index IRQ Rtd Ref IRQs Initial Probe 0 3 N 0 1 3 4 5 6 7 10 12 14 15 Validation 0 3 N 0 1 3 4 5 6 7 10 12 14 15 After Disable 0 255 N 0 1 3 4 5 6 7 10 12 14 15 pci_link3: Index IRQ Rtd Ref IRQs Initial Probe 0 10 N 0 1 3 4 5 6 7 11 12 14 15 Validation 0 255 N 0 1 3 4 5 6 7 11 12 14 15 After Disable 0 255 N 0 1 3 4 5 6 7 11 12 14 15 pci_link4: Index IRQ Rtd Ref IRQs Initial Probe 0 7 N 0 1 3 4 5 6 7 10 12 14 15 Validation 0 7 N 0 1 3 4 5 6 7 10 12 14 15 After Disable 0 255 N 0 1 3 4 5 6 7 10 12 14 15 pci_link5: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 1 3 4 5 6 7 11 12 14 15 Validation 0 11 N 0 1 3 4 5 6 7 11 12 14 15 After Disable 0 255 N 0 1 3 4 5 6 7 11 12 14 15 pci_link6: Index IRQ Rtd Ref IRQs Initial Probe 0 10 N 0 1 3 4 5 6 7 10 12 14 15 Validation 0 10 N 0 1 3 4 5 6 7 10 12 14 15 After Disable 0 255 N 0 1 3 4 5 6 7 10 12 14 15 pci_link7: Index IRQ Rtd Ref IRQs Initial Probe 0 4 N 0 1 3 4 5 6 7 11 12 14 15 Validation 0 4 N 0 1 3 4 5 6 7 11 12 14 15 After Disable 0 255 N 0 1 3 4 5 6 7 11 12 14 15 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pci0: domain=0, physical bus=0 found-> vendor=0x8086, dev=0x2a40, revid=0x07 domain=0, bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0106, statreg=0x2090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2a42, revid=0x07 domain=0, bus=0, slot=2, func=0 class=03-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x0090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=5 powerspec 3 supports D0 D3 current D0 MSI supports 1 message map[10]: type Memory, range 64, base 0xf4000000, size 22, enabled map[18]: type Prefetchable Memory, range 64, base 0xd0000000, size 28, enabled map[20]: type I/O Port, range 32, base 0x1800, size 3, enabled pcib0: matched entry for 0.2.INTA pcib0: slot 2 INTA hardwired to IRQ 16 found-> vendor=0x8086, dev=0x2a43, revid=0x07 domain=0, bus=0, slot=2, func=1 class=03-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x0090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) powerspec 3 supports D0 D3 current D0 map[10]: type Memory, range 64, base 0xf4400000, size 20, enabled found-> vendor=0x8086, dev=0x2937, revid=0x03 domain=0, bus=0, slot=26, func=0 class=0c-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0298, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=5 map[20]: type I/O Port, range 32, base 0x1820, size 5, enabled pcib0: matched entry for 0.26.INTA pcib0: slot 26 INTA hardwired to IRQ 16 found-> vendor=0x8086, dev=0x2938, revid=0x03 domain=0, bus=0, slot=26, func=1 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 map[20]: type I/O Port, range 32, base 0x1840, size 5, enabled pcib0: matched entry for 0.26.INTB pcib0: slot 26 INTB hardwired to IRQ 21 found-> vendor=0x8086, dev=0x2939, revid=0x03 domain=0, bus=0, slot=26, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=7 map[20]: type I/O Port, range 32, base 0x1860, size 5, enabled pcib0: matched entry for 0.26.INTC pcib0: slot 26 INTC hardwired to IRQ 20 found-> vendor=0x8086, dev=0x293c, revid=0x03 domain=0, bus=0, slot=26, func=7 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=7 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xf4a04800, size 10, enabled pcib0: matched entry for 0.26.INTC pcib0: slot 26 INTC hardwired to IRQ 20 found-> vendor=0x8086, dev=0x293e, revid=0x03 domain=0, bus=0, slot=27, func=0 class=04-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type Memory, range 64, base 0xf4a00000, size 14, enabled pcib0: matched entry for 0.27.INTA pcib0: slot 27 INTA hardwired to IRQ 22 found-> vendor=0x8086, dev=0x2940, revid=0x03 domain=0, bus=0, slot=28, func=0 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 MSI supports 1 message pcib0: matched entry for 0.28.INTA pcib0: slot 28 INTA hardwired to IRQ 17 found-> vendor=0x8086, dev=0x2942, revid=0x03 domain=0, bus=0, slot=28, func=1 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) intpin=b, irq=5 powerspec 2 supports D0 D3 current D0 MSI supports 1 message pcib0: matched entry for 0.28.INTB pcib0: slot 28 INTB hardwired to IRQ 16 found-> vendor=0x8086, dev=0x2944, revid=0x03 domain=0, bus=0, slot=28, func=2 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) intpin=c, irq=3 powerspec 2 supports D0 D3 current D0 MSI supports 1 message pcib0: matched entry for 0.28.INTC pcib0: slot 28 INTC hardwired to IRQ 18 found-> vendor=0x8086, dev=0x2946, revid=0x03 domain=0, bus=0, slot=28, func=3 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) intpin=d, irq=10 powerspec 2 supports D0 D3 current D0 MSI supports 1 message pcib0: matched entry for 0.28.INTD pcib0: slot 28 INTD hardwired to IRQ 19 found-> vendor=0x8086, dev=0x294a, revid=0x03 domain=0, bus=0, slot=28, func=5 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) intpin=b, irq=5 powerspec 2 supports D0 D3 current D0 MSI supports 1 message pcib0: matched entry for 0.28.INTB pcib0: slot 28 INTB hardwired to IRQ 16 found-> vendor=0x8086, dev=0x2934, revid=0x03 domain=0, bus=0, slot=29, func=0 class=0c-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=4 map[20]: type I/O Port, range 32, base 0x1880, size 5, enabled pcib0: matched entry for 0.29.INTA pcib0: slot 29 INTA hardwired to IRQ 23 found-> vendor=0x8086, dev=0x2935, revid=0x03 domain=0, bus=0, slot=29, func=1 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=10 map[20]: type I/O Port, range 32, base 0x18a0, size 5, enabled pcib0: matched entry for 0.29.INTB pcib0: slot 29 INTB hardwired to IRQ 19 found-> vendor=0x8086, dev=0x2936, revid=0x03 domain=0, bus=0, slot=29, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=3 map[20]: type I/O Port, range 32, base 0x18c0, size 5, enabled pcib0: matched entry for 0.29.INTC pcib0: slot 29 INTC hardwired to IRQ 18 found-> vendor=0x8086, dev=0x293a, revid=0x03 domain=0, bus=0, slot=29, func=7 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=4 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xf4a04c00, size 10, enabled pcib0: matched entry for 0.29.INTA pcib0: slot 29 INTA hardwired to IRQ 23 found-> vendor=0x8086, dev=0x2448, revid=0x93 domain=0, bus=0, slot=30, func=0 class=06-04-01, hdrtype=0x01, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2919, revid=0x03 domain=0, bus=0, slot=31, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2929, revid=0x03 domain=0, bus=0, slot=31, func=2 class=01-06-01, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=10 powerspec 3 supports D0 D3 current D0 MSI supports 16 messages map[10]: type I/O Port, range 32, base 0x1818, size 3, enabled map[14]: type I/O Port, range 32, base 0x180c, size 2, enabled map[18]: type I/O Port, range 32, base 0x1810, size 3, enabled map[1c]: type I/O Port, range 32, base 0x1808, size 2, enabled map[20]: type I/O Port, range 32, base 0x18e0, size 5, enabled map[24]: type Memory, range 32, base 0xf4a04000, size 11, enabled pcib0: matched entry for 0.31.INTB pcib0: slot 31 INTB hardwired to IRQ 19 found-> vendor=0x8086, dev=0x2930, revid=0x03 domain=0, bus=0, slot=31, func=3 class=0c-05-00, hdrtype=0x00, mfdev=0 cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=10 map[10]: type Memory, range 64, base 0, size 8, enabled map[20]: type I/O Port, range 32, base 0x1c00, size 5, enabled pcib0: matched entry for 0.31.INTC pcib0: slot 31 INTC hardwired to IRQ 19 vgapci0: <VGA-compatible display> port 0x1800-0x1807 mem 0xf4000000-0xf43fffff,0xd0000000-0xdfffffff irq 16 at device 2.0 on pci0 agp0: <Intel GM45 SVGA controller> on vgapci0 vgapci0: Reserved 0x10000000 bytes for rid 0x18 type 3 at 0xd0000000 vgapci0: Reserved 0x400000 bytes for rid 0x10 type 3 at 0xf4000000 agp0: detected 32764k stolen memory agp0: aperture size is 256M vgapci1: <VGA-compatible display> mem 0xf4400000-0xf44fffff at device 2.1 on pci0 uhci0: <Intel 82801I (ICH9) USB controller> port 0x1820-0x183f irq 16 at device 26.0 on pci0 uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1820 ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 0 vector 49 uhci0: [MPSAFE] uhci0: [ITHREAD] uhci0: LegSup = 0x3000 usbus0: <Intel 82801I (ICH9) USB controller> on uhci0 uhci1: <Intel 82801I (ICH9) USB controller> port 0x1840-0x185f irq 21 at device 26.1 on pci0 uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1840 ioapic0: routing intpin 21 (PCI IRQ 21) to lapic 0 vector 50 uhci1: [MPSAFE] uhci1: [ITHREAD] usbus1: <Intel 82801I (ICH9) USB controller> on uhci1 uhci2: <Intel 82801I (ICH9) USB controller> port 0x1860-0x187f irq 20 at device 26.2 on pci0 uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1860 ioapic0: routing intpin 20 (PCI IRQ 20) to lapic 0 vector 51 uhci2: [MPSAFE] uhci2: [ITHREAD] usbus2: <Intel 82801I (ICH9) USB controller> on uhci2 ehci0: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xf4a04800-0xf4a04bff irq 20 at device 26.7 on pci0 ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0xf4a04800 ehci0: [MPSAFE] ehci0: [ITHREAD] usbus3: EHCI version 1.0 usbus3: <Intel 82801I (ICH9) USB 2.0 controller> on ehci0 pci0: <multimedia, HDA> at device 27.0 (no driver attached) pcib1: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0 pcib1: domain 0 pcib1: secondary bus 2 pcib1: subordinate bus 2 pcib1: I/O decode 0xf000-0xfff pcib1: memory decode 0xf4500000-0xf45fffff pcib1: no prefetched decode pci2: <ACPI PCI bus> on pcib1 pci2: domain=0, physical bus=2 found-> vendor=0x197b, dev=0x2382, revid=0x00 domain=0, bus=2, slot=0, func=0 class=08-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=5 powerspec 3 supports D0 D3 current D0 MSI supports 1 message map[10]: type Memory, range 32, base 0xf4500000, size 8, enabled pcib1: requested memory range 0xf4500000-0xf45000ff: good pcib1: matched entry for 2.0.INTA pcib1: slot 0 INTA hardwired to IRQ 16 found-> vendor=0x197b, dev=0x2381, revid=0x00 domain=0, bus=2, slot=0, func=2 class=08-05-01, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=5 powerspec 3 supports D0 D3 current D0 MSI supports 1 message map[10]: type Memory, range 32, base 0xf4500400, size 8, enabled pcib1: requested memory range 0xf4500400-0xf45004ff: good pcib1: matched entry for 2.0.INTA pcib1: slot 0 INTA hardwired to IRQ 16 found-> vendor=0x197b, dev=0x2383, revid=0x00 domain=0, bus=2, slot=0, func=3 class=08-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=5 powerspec 3 supports D0 D3 current D0 MSI supports 1 message map[10]: type Memory, range 32, base 0xf4500800, size 8, enabled pcib1: requested memory range 0xf4500800-0xf45008ff: good pcib1: matched entry for 2.0.INTA pcib1: slot 0 INTA hardwired to IRQ 16 pci2: <base peripheral> at device 0.0 (no driver attached) pci2: <base peripheral, SD host controller> at device 0.2 (no driver attached) pci2: <base peripheral> at device 0.3 (no driver attached) pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.1 on pci0 pcib2: domain 0 pcib2: secondary bus 3 pcib2: subordinate bus 3 pcib2: I/O decode 0xf000-0xfff pcib2: no prefetched decode pci3: <ACPI PCI bus> on pcib2 pci3: domain=0, physical bus=3 pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 pcib3: domain 0 pcib3: secondary bus 4 pcib3: subordinate bus 4 pcib3: I/O decode 0xf000-0xfff pcib3: memory decode 0xf4700000-0xf47fffff pcib3: no prefetched decode pci4: <ACPI PCI bus> on pcib3 pci4: domain=0, physical bus=4 found-> vendor=0x8086, dev=0x4237, revid=0x00 domain=0, bus=4, slot=0, func=0 class=02-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=3 powerspec 3 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type Memory, range 64, base 0xf4700000, size 13, enabled pcib3: requested memory range 0xf4700000-0xf4701fff: good pcib3: matched entry for 4.0.INTA pcib3: slot 0 INTA hardwired to IRQ 18 pci4: <network> at device 0.0 (no driver attached) pcib4: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 pcib4: domain 0 pcib4: secondary bus 5 pcib4: subordinate bus 6 pcib4: I/O decode 0x2000-0x2fff pcib4: memory decode 0xf0000000-0xf3ffffff pcib4: prefetched decode 0xf6000000-0xf7ffffff pci5: <ACPI PCI bus> on pcib4 pci5: domain=0, physical bus=5 pcib5: <ACPI PCI-PCI bridge> irq 16 at device 28.5 on pci0 pcib5: domain 0 pcib5: secondary bus 7 pcib5: subordinate bus 7 pcib5: I/O decode 0xf000-0xfff pcib5: memory decode 0xf4600000-0xf46fffff pcib5: no prefetched decode pci7: <ACPI PCI bus> on pcib5 pci7: domain=0, physical bus=7 found-> vendor=0x14e4, dev=0x1713, revid=0x02 domain=0, bus=7, slot=0, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 3 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type Memory, range 64, base 0xf4600000, size 16, enabled pcib5: requested memory range 0xf4600000-0xf460ffff: good pcib5: matched entry for 7.0.INTA pcib5: slot 0 INTA hardwired to IRQ 17 bge0: <Broadcom BCM5906 A2, ASIC rev. 0xc002> mem 0xf4600000-0xf460ffff irq 17 at device 0.0 on pci7 bge0: Reserved 0x10000 bytes for rid 0x10 type 3 at 0xf4600000 bge0: attempting to allocate 1 MSI vectors (1 supported) bge0: using IRQ 256 for MSI miibus0: <MII bus> on bge0 brgphy0: <BCM5906 10/100baseTX PHY> PHY 1 on miibus0 brgphy0: OUI 0x000af7, model 0x0004, rev. 0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto bge0: bpf attached bge0: Ethernet address: 00:1e:ec:9c:88:87 msi: Assigning MSI IRQ 256 to local APIC 0 vector 52 bge0: [MPSAFE] bge0: [ITHREAD] uhci3: <Intel 82801I (ICH9) USB controller> port 0x1880-0x189f irq 23 at device 29.0 on pci0 uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1880 ioapic0: routing intpin 23 (PCI IRQ 23) to lapic 0 vector 53 uhci3: [MPSAFE] uhci3: [ITHREAD] usbus4: <Intel 82801I (ICH9) USB controller> on uhci3 uhci4: <Intel 82801I (ICH9) USB controller> port 0x18a0-0x18bf irq 19 at device 29.1 on pci0 uhci4: Reserved 0x20 bytes for rid 0x20 type 4 at 0x18a0 ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 0 vector 54 uhci4: [MPSAFE] uhci4: [ITHREAD] usbus5: <Intel 82801I (ICH9) USB controller> on uhci4 uhci5: <Intel 82801I (ICH9) USB controller> port 0x18c0-0x18df irq 18 at device 29.2 on pci0 uhci5: Reserved 0x20 bytes for rid 0x20 type 4 at 0x18c0 ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 0 vector 55 uhci5: [MPSAFE] uhci5: [ITHREAD] usbus6: <Intel 82801I (ICH9) USB controller> on uhci5 ehci1: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xf4a04c00-0xf4a04fff irq 23 at device 29.7 on pci0 ehci1: Reserved 0x400 bytes for rid 0x10 type 3 at 0xf4a04c00 ehci1: [MPSAFE] ehci1: [ITHREAD] usbus7: EHCI version 1.0 usbus7: <Intel 82801I (ICH9) USB 2.0 controller> on ehci1 pcib6: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pcib6: domain 0 pcib6: secondary bus 8 pcib6: subordinate bus 8 pcib6: I/O decode 0xf000-0xfff pcib6: no prefetched decode pcib6: Subtractively decoded bridge. pci8: <ACPI PCI bus> on pcib6 pci8: domain=0, physical bus=8 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel (ID=29298086) AHCI controller> port 0x1818-0x181f,0x180c-0x180f,0x1810-0x1817,0x1808-0x180b,0x18e0-0x18ff mem 0xf4a04000-0xf4a047ff irq 19 at device 31.2 on pci0 atapci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x18e0 atapci0: Reserved 0x800 bytes for rid 0x24 type 3 at 0xf4a04000 atapci0: [MPSAFE] atapci0: [ITHREAD] atapci0: AHCI Version 01.20 controller with 4 ports PM not supported ata2: <ATA channel 0> on atapci0 ata2: SATA connect time=10ms ata2: ready wait time=5ms ata2: ahci_issue_cmd time=100ms cnt=0ms status=00000000 ata2: ahci_issue_cmd time=0ms cnt=0ms status=00000000 ata2: ready wait time=9ms ata2: SIGNATURE: 00000101 ata2: ahci_reset devices=00000001 ata2: [MPSAFE] ata2: [ITHREAD] ata3: <ATA channel 1> on atapci0 ata3: SATA connect time=0ms ata3: ready wait time=17ms ata3: ahci_issue_cmd time=100ms cnt=0ms status=00000000 ata3: ahci_issue_cmd time=0ms cnt=0ms status=00000000 ata3: ready wait time=1ms ata3: SIGNATURE: eb140101 ata3: ahci_reset devices=00010000 ata3: [MPSAFE] ata3: [ITHREAD] pci0: <serial bus, SMBus> at device 31.3 (no driver attached) acpi_tz0: <Thermal Zone> on acpi0 atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 atrtc0: Warning: Couldn't map I/O. atrtc0: registered as a time-of-day clock (resolution 1000000us) battery0: <ACPI Control Method Battery> on acpi0 acpi_acad0: <AC Adapter> on acpi0 psmcpnp0: <PS/2 mouse port> irq 12 on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0047 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 0 vector 56 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] psm0: current command byte:0047 psm0: <PS/2 Mouse> irq 12 on atkbdc0 ioapic0: routing intpin 12 (ISA IRQ 12) to lapic 0 vector 57 psm0: [GIANT-LOCKED] psm0: [ITHREAD] psm0: model GlidePoint, device ID 0-00, 2 buttons psm0: config:00000000, flags:00000008, packet size:3 psm0: syncmask:c0, syncbits:00 cpu0: <ACPI CPU> on acpi0 ACPI: SSDT @ 0x0x3db1ac20/0x0265 (v 1 PmRef Cpu0Ist 0x00003000 INTL 0x20050624) ACPI: SSDT @ 0x0x3db18620/0x0549 (v 1 PmRef Cpu0Cst 0x00003001 INTL 0x20050624) ACPI Error (dsopcode-0350): No pointer back to NS node in buffer obj 0xffffff000332e280 [20070320] ACPI Exception (dswexec-0556): AE_AML_INTERNAL, While resolving operands for [OpcodeName unavailable] [20070320] ACPI Error (psparse-0626): Method parse/execution failed [\\_PR_.CPU0._OSC] (Node 0xffffff00013c9540), AE_AML_INTERNAL est0: <Enhanced SpeedStep Frequency Control> on cpu0 p4tcc0: <CPU Frequency Thermal Control> on cpu0 cpu1: <ACPI CPU> on acpi0 ACPI: SSDT @ 0x0x3db19ca0/0x01CF (v 1 PmRef ApIst 0x00003000 INTL 0x20050624) ACPI: SSDT @ 0x0x3db19f20/0x008D (v 1 PmRef ApCst 0x00003000 INTL 0x20050624) ACPI Error (dsopcode-0350): No pointer back to NS node in buffer obj 0xffffff0003336680 [20070320] ACPI Exception (dswexec-0556): AE_AML_INTERNAL, While resolving operands for [OpcodeName unavailable] [20070320] ACPI Error (psparse-0626): Method parse/execution failed [\\_PR_.CPU1._OSC] (Node 0xffffff00013c9460), AE_AML_INTERNAL est1: <Enhanced SpeedStep Frequency Control> on cpu1 p4tcc1: <CPU Frequency Thermal Control> on cpu1 ahc_isa_probe 1: ioport 0x1c00 alloc failed ex_isa_identify() isa_probe_children: disabling PnP devices atkbdc: atkbdc0 already exists; skipping it sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: probing non-PnP devices orm0: <ISA Option ROMs> at iomem 0xc0000-0xcf7ff,0xdc000-0xdffff,0xe0000-0xe17ff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd1, terminal emulator: scteken (teken terminal) vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 ppc0: cannot reserve I/O port range ppc0: <Parallel port> failed to probe at irq 7 on isa0 sio0 failed to probe at port 0x3f8 irq 4 on isa0 sio1 failed to probe at port 0x2f8 irq 3 on isa0 sio2: not probed (disabled) sio3: not probed (disabled) isa_probe_children: probing PnP devices Device configuration finished. procfs registered lapic: Divisor 2, Frequency 83125582 hz Timecounter "TSC" frequency 1995013728 Hz quality -100 Timecounters tick every 1.000 msec lo0: bpf attached hptrr: no controller detected. ata2: identify ch->devices=00000001 usbus7: 480Mbps High Speed USB v2.0 usbus0: 12Mbps Full Speed USB v1.0 usbus1: 12Mbps Full Speed USB v1.0 usbus2: 12Mbps Full Speed USB v1.0 usbus3: 480Mbps High Speed USB v2.0 usbus4: 12Mbps Full Speed USB v1.0 usbus5: 12Mbps Full Speed USB v1.0 usbus6: 12Mbps Full Speed USB v1.0 battery0: battery initialization start acpi_tz0: _AC0: temperature 52.0 >= setpoint 0.0 acpi_tz0: switched from NONE to _AC0: 52.0C acpi_acad0: acline initialization start ata2-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire ad4: 238475MB <WDC WD2500BEVS-88UST0 01.01A01> at ata2-master SATA150 ad4: 488397168 sectors [484521C/16H/63S] 16 sectors/interrupt 1 depth queue GEOM: new disk ad4 ugen0.1: <Intel> at usbus0 ushub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 ugen1.1: <Intel> at usbus1 ushub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 ugen2.1: <Intel> at usbus2 ushub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 ugen3.1: <Intel> at usbus3 ushub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3 ugen4.1: <Intel> at usbus4 ushub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 ugen5.1: <Intel> at usbus5 ushub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5 ugen6.1: <Intel> at usbus6 ushub6: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6 ugen7.1: <Intel> at usbus7 ushub7: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7 acpi_acad0: On Line acpi_acad0: acline initialization done, tried 1 times acpi: bad write to port 0x080 (32), val 0x61 AcpiOsDerivePciId: \\_SB_.PCI0.RP01.PXCS -> bus 0 dev 28 func 0 ad4: Intel check1 failed ad4: Adaptec check1 failed ad4: LSI (v3) check1 failed ad4: LSI (v2) check1 failed AcpiOsDerivePciId: \\_SB_.PCI0.RP02.PXCS -> bus 0 dev 28 func 1 AcpiOsDerivePciId: \\_SB_.PCI0.RP03.PXCS -> bus 0 dev 28 func 2 ad4: FreeBSD check1 failed ata3: identify ch->devices=00010000 ata3-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire ata3: device_reset timeout=1580us acd0: <HL-DT-ST DVDRAM GSA-T50N/RV06> DVDR drive at ata3 as master acd0: read 4134KB/s (4134KB/s) write 4134KB/s (4134KB/s), 2048KB buffer, SATA150 acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet acd0: Writes: CDR, CDRW, DVDR, DVDRAM, test write, burnproof acd0: Audio: play, 256 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: no/blank disc ATA PseudoRAID loaded SMP: AP CPU #1 Launched! cpu1 AP: ID: 0x01000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00000400 ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 1 vector 48 ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 1 vector 49 ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 1 vector 50 ioapic0: routing intpin 21 (PCI IRQ 21) to lapic 1 vector 51 msi: Assigning MSI IRQ 256 to local APIC 1 vector 52 WARNING: WITNESS option enabled, expect reduced performance. GEOM: ad4s1: geometry does not match label (255h,63s != 16h,63s). AcpiOsDerivePciId: \\_SB_.PCI0.RP04.PXCS -> bus 0 dev 28 func 3 AcpiOsDerivePciId: \\_SB_.PCI0.RP05.PXCS -> bus 0 dev 28 func 4 AcpiOsDerivePciId: \\_SB_.PCI0.RP06.PXCS -> bus 0 dev 28 func 5 acpi: bad write to port 0x080 (32), val 0x62 Trying to mount root from ufs:/dev/ad4s1a ct_to_ts([2009-02-18 20:13:10]) = 1234987990.000000000 start_init: trying /sbin/init ushub0: 2 ports with 2 removable, self powered ushub1: 2 ports with 2 removable, self powered ushub2: 2 ports with 2 removable, self powered ushub4: 2 ports with 2 removable, self powered ushub5: 2 ports with 2 removable, self powered ushub6: 2 ports with 2 removable, self powered ushub3: 6 ports with 6 removable, self powered ushub7: 6 ports with 6 removable, self powered ugen7.2: <Vimicro Corp.> at usbus7 bge0: link UP link_elf_obj: symbol dev2unit undefined linker_load_file: Unsupported file type snd_unit_init() u=0x00ff8000 [512] d=0x00007c00 [32] c=0x000003ff [1024] feeder_register: snd_unit=-1 snd_maxautovchans=16 latency=5 feeder_buffersize=16384 feeder_rate _min=1 feeder_rate_max=2016000 feeder_rate_round=25 pci0: driver added found-> vendor=0x8086, dev=0x293e, revid=0x03 domain=0, bus=0, slot=27, func=0 class=04-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=22 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit pci0:0:27:0: reprobing on driver added hdac0: <Intel 82801I High Definition Audio Controller> mem 0xf4a00000-0xf4a03fff irq 22 at devi ce 27.0 on pci0 hdac0: HDA Driver Revision: 20090215_0128 hdac0: Reserved 0x4000 bytes for rid 0x10 type 3 at 0xf4a00000 hdac0: attempting to allocate 1 MSI vectors (1 supported) hdac0: using IRQ 257 for MSI msi: Assigning MSI IRQ 257 to local APIC 0 vector 48 hdac0: [MPSAFE] hdac0: [ITHREAD] hdac0: Probing codec #0... hdac0: HDA Codec #0: Intel G45 HDMI hdac0: HDA Codec ID: 0x80862802 hdac0: Vendor: 0x8086 hdac0: Device: 0x2802 hdac0: Revision: 0x00 hdac0: Stepping: 0x00 hdac0: PCI Subvendor: 0x3a0d17aa hdac0: Found audio FG nid=1 startnode=2 endnode=4 total=2 hdac0: Probing codec #2... hdac0: HDA Codec #2: Conexant CX20561 (Hermosa) hdac0: HDA Codec ID: 0x14f15051 hdac0: Vendor: 0x14f1 hdac0: Device: 0x5051 hdac0: Revision: 0x00 hdac0: Stepping: 0x00 hdac0: PCI Subvendor: 0x3a0d17aa hdac0: Found audio FG nid=1 startnode=16 endnode=31 total=15 hdac0: Found modem FG nid=2 startnode=112 endnode=116 total=4 hdac0: hdac0: Processing audio FG cad=0 nid=1... hdac0: GPIO: 0x00000000 NumGPIO=0 NumGPO=0 NumGPI=0 GPIWake=0 GPIUnsol=0 hdac0: nid 3 0x18560010 as 1 seq 0 Digital-out Jack jack 6 loc 24 color Unknown misc 0 hdac0: Patched pins configuration: hdac0: nid 3 0x18560010 as 1 seq 0 Digital-out Jack jack 6 loc 24 color Unknown misc 0 hdac0: 1 associations found: hdac0: Association 0 (1) out: hdac0: Pin nid=3 seq=0 hdac0: Tracing association 0 (1) hdac0: Pin 3 traced to DAC 2 hdac0: Association 0 (1) trace succeeded hdac0: Tracing input monitor hdac0: Tracing beeper hdac0: FG config/quirks: forcestereo ivref50 ivref80 ivref100 ivref hdac0: hdac0: +-------------------+ hdac0: | DUMPING HDA NODES | hdac0: +-------------------+ hdac0: hdac0: Default Parameter hdac0: ----------------- hdac0: IN amp: 0x00000000 hdac0: OUT amp: 0x00000000 hdac0: hdac0: nid: 2 hdac0: Name: audio output hdac0: Widget cap: 0x00006211 hdac0: DIGITAL STEREO hdac0: Association: 0 (0x00000001) hdac0: OSS: pcm (pcm) hdac0: Stream cap: 0x00000005 hdac0: AC3 PCM hdac0: PCM cap: 0x001e07f0 hdac0: 16 20 24 32 bits, 32 44 48 88 96 176 192 KHz hdac0: hdac0: nid: 3 hdac0: Name: pin: Digital-out (Jack) hdac0: Widget cap: 0x0040739d hdac0: DIGITAL UNSOL STEREO hdac0: Association: 0 (0x00000001) hdac0: Pin cap: 0x00000094 hdac0: PDC OUT hdac0: Pin config: 0x18560010 hdac0: Pin control: 0x00000040 OUT hdac0: Output amp: 0x80000000 hdac0: mute=1 step=0 size=0 offset=0 hdac0: connections: 1 hdac0: | hdac0: + <- nid=2 [audio output] hdac0: hdac0: Processing audio FG cad=2 nid=1... hdac0: GPIO: 0x40000004 NumGPIO=4 NumGPO=0 NumGPI=0 GPIWake=0 GPIUnsol=1 hdac0: nid 22 0x01214040 as 4 seq 0 Headphones Jack jack 1 loc 1 color Green misc 0 hdac0: nid 23 0x400001f0 as 15 seq 0 Line-out None jack 0 loc 0 color Unknown misc 1 hdac0: nid 24 0x01a19030 as 3 seq 0 Mic Jack jack 1 loc 1 color Pink misc 0 hdac0: nid 25 0x400001f0 as 15 seq 0 Line-out None jack 0 loc 0 color Unknown misc 1 hdac0: nid 26 0x92170110 as 1 seq 0 Speaker Fixed jack 7 loc 18 color Unknown misc 1 hdac0: nid 27 0x400001f0 as 15 seq 0 Line-out None jack 0 loc 0 color Unknown misc 1 hdac0: nid 28 0x400001f0 as 15 seq 0 Line-out None jack 0 loc 0 color Unknown misc 1 hdac0: nid 29 0x97a70120 as 2 seq 0 Mic Fixed jack 7 loc 23 color Unknown misc 1 hdac0: Patched pins configuration: hdac0: nid 22 0x01214040 as 4 seq 0 Headphones Jack jack 1 loc 1 color Green misc 0 hdac0: nid 23 0x400001f0 as 15 seq 0 Line-out None jack 0 loc 0 color Unknown misc 1 [DISABLED] hdac0: nid 24 0x01a19030 as 3 seq 0 Mic Jack jack 1 loc 1 color Pink misc 0 hdac0: nid 25 0x400001f0 as 15 seq 0 Line-out None jack 0 loc 0 color Unknown misc 1 [DISABLED] hdac0: nid 26 0x92170110 as 1 seq 0 Speaker Fixed jack 7 loc 18 color Unknown misc 1 hdac0: nid 27 0x400001f0 as 15 seq 0 Line-out None jack 0 loc 0 color Unknown misc 1 [DISABLED] hdac0: nid 28 0x400001f0 as 15 seq 0 Line-out None jack 0 loc 0 color Unknown misc 1 [DISABLED] hdac0: nid 29 0x97a70120 as 2 seq 0 Mic Fixed jack 7 loc 23 color Unknown misc 1 hdac0: 4 associations found: hdac0: Association 0 (1) out: hdac0: Pin nid=26 seq=0 hdac0: Association 1 (2) in: hdac0: Pin nid=29 seq=0 hdac0: Association 2 (3) in: hdac0: Pin nid=24 seq=0 hdac0: Association 3 (4) out: hdac0: Pin nid=22 seq=0 hdac0: Tracing association 0 (1) hdac0: Pin 26 traced to DAC 16 hdac0: Association 0 (1) trace succeeded hdac0: Tracing association 1 (2) hdac0: Pin 29 traced to ADC 20 hdac0: Association 1 (2) trace succeeded hdac0: Tracing association 2 (3) hdac0: Pin 24 traced to ADC 21 hdac0: Association 2 (3) trace succeeded hdac0: Tracing association 3 (4) hdac0: Pin 22 traced to DAC 17 hdac0: Association 3 (4) trace succeeded hdac0: Tracing input monitor hdac0: Tracing beeper hdac0: FG config/quirks: forcestereo ivref50 ivref80 ivref100 ivref hdac0: hdac0: +-------------------+ hdac0: | DUMPING HDA NODES | hdac0: +-------------------+ hdac0: hdac0: Default Parameter hdac0: ----------------- hdac0: Stream cap: 0x00000001 hdac0: PCM hdac0: PCM cap: 0x000e0160 hdac0: 16 20 24 bits, 44 48 96 KHz hdac0: IN amp: 0x00000000 hdac0: OUT amp: 0x00000000 hdac0: hdac0: nid: 16 hdac0: Name: audio output hdac0: Widget cap: 0x00000c1d hdac0: LRSWAP PWR STEREO hdac0: Association: 0 (0x00000001) hdac0: OSS: pcm (pcm) hdac0: Stream cap: 0x00000001 hdac0: PCM hdac0: PCM cap: 0x000e0560 hdac0: 16 20 24 bits, 44 48 96 192 KHz hdac0: Output amp: 0x00034a4a hdac0: mute=0 step=74 size=3 offset=74 hdac0: hdac0: nid: 17 hdac0: Name: audio output hdac0: Widget cap: 0x00000c1d hdac0: LRSWAP PWR STEREO hdac0: Association: 3 (0x00000001) hdac0: OSS: pcm (pcm) hdac0: Stream cap: 0x00000001 hdac0: PCM hdac0: PCM cap: 0x000e0560 hdac0: 16 20 24 bits, 44 48 96 192 KHz hdac0: Output amp: 0x00034a4a hdac0: mute=0 step=74 size=3 offset=74 hdac0: hdac0: nid: 18 [DISABLED] hdac0: Name: audio output hdac0: Widget cap: 0x00000211 hdac0: DIGITAL STEREO hdac0: Stream cap: 0x00000005 hdac0: AC3 PCM hdac0: PCM cap: 0x000e0160 hdac0: 16 20 24 bits, 44 48 96 KHz hdac0: hdac0: nid: 19 hdac0: Name: beep widget hdac0: Widget cap: 0x0070000c hdac0: Association: -2 (0x00000000) hdac0: OSS: speaker (speaker) hdac0: Output amp: 0x00170303 hdac0: mute=0 step=3 size=23 offset=3 hdac0: hdac0: nid: 20 hdac0: Name: audio input hdac0: Widget cap: 0x00100d1b hdac0: LRSWAP PWR STEREO hdac0: Association: 1 (0x00000001) hdac0: Stream cap: 0x00000001 hdac0: PCM hdac0: PCM cap: 0x000e0160 hdac0: 16 20 24 bits, 44 48 96 KHz hdac0: Input amp: 0x0003504a hdac0: mute=0 step=80 size=3 offset=74 hdac0: connections: 2 hdac0: | hdac0: + <- nid=29 [pin: Mic (Fixed)] (selected) hdac0: + [DISABLED] <- nid=23 [pin: Line-out (None)] [DISABLED] hdac0: hdac0: nid: 21 hdac0: Name: audio input hdac0: Widget cap: 0x00100d1b hdac0: LRSWAP PWR STEREO hdac0: Association: 2 (0x00000001) hdac0: Stream cap: 0x00000001 hdac0: PCM hdac0: PCM cap: 0x000e0160 hdac0: 16 20 24 bits, 44 48 96 KHz hdac0: Input amp: 0x0003504a hdac0: mute=0 step=80 size=3 offset=74 hdac0: connections: 1 hdac0: | hdac0: + <- nid=24 [pin: Mic (Pink Jack)] hdac0: hdac0: nid: 22 hdac0: Name: pin: Headphones (Green Jack) hdac0: Widget cap: 0x00400581 hdac0: PWR UNSOL STEREO hdac0: Association: 3 (0x00000001) hdac0: Pin cap: 0x0000001c hdac0: PDC HP OUT hdac0: Pin config: 0x01214040 hdac0: Pin control: 0x000000c0 HP OUT hdac0: connections: 2 hdac0: | hdac0: + [DISABLED] <- nid=16 [audio output] hdac0: + <- nid=17 [audio output] (selected) hdac0: hdac0: nid: 23 [DISABLED] hdac0: Name: pin: Line-out (None) hdac0: Widget cap: 0x0040048b hdac0: PWR UNSOL STEREO hdac0: Pin cap: 0x00001224 hdac0: PDC IN VREF[ 50 80 ] hdac0: Pin config: 0x400001f0 hdac0: Pin control: 0x00000000 hdac0: Input amp: 0x00270400 hdac0: mute=0 step=4 size=39 offset=0 hdac0: hdac0: nid: 24 hdac0: Name: pin: Mic (Pink Jack) hdac0: Widget cap: 0x0040048b hdac0: PWR UNSOL STEREO hdac0: Association: 2 (0x00000001) hdac0: OSS: mic (mic) hdac0: Pin cap: 0x00001224 hdac0: PDC IN VREF[ 50 80 ] hdac0: Pin config: 0x01a19030 hdac0: Pin control: 0x00000024 IN VREFs hdac0: Input amp: 0x00270400 hdac0: mute=0 step=4 size=39 offset=0 hdac0: hdac0: nid: 25 [DISABLED] hdac0: Name: pin: Line-out (None) hdac0: Widget cap: 0x00400581 hdac0: PWR UNSOL STEREO hdac0: Pin cap: 0x00000014 hdac0: PDC OUT hdac0: Pin config: 0x400001f0 hdac0: Pin control: 0x00000000 hdac0: connections: 2 hdac0: | hdac0: + <- nid=16 [audio output] (selected) hdac0: + <- nid=17 [audio output] hdac0: hdac0: nid: 26 hdac0: Name: pin: Speaker (Fixed) hdac0: Widget cap: 0x00400501 hdac0: PWR STEREO hdac0: Association: 0 (0x00000001) hdac0: Pin cap: 0x00010010 hdac0: OUT EAPD hdac0: Pin config: 0x92170110 hdac0: Pin control: 0x00000040 OUT hdac0: EAPD: 0x00000002 hdac0: connections: 2 hdac0: | hdac0: + <- nid=16 [audio output] (selected) hdac0: + [DISABLED] <- nid=17 [audio output] hdac0: hdac0: nid: 27 [DISABLED] hdac0: Name: pin: Line-out (None) hdac0: Widget cap: 0x00400500 hdac0: PWR hdac0: Pin cap: 0x00010010 hdac0: OUT EAPD hdac0: Pin config: 0x400001f0 hdac0: Pin control: 0x00000000 hdac0: EAPD: 0x00000002 hdac0: connections: 2 hdac0: | hdac0: + <- nid=16 [audio output] (selected) hdac0: + <- nid=17 [audio output] hdac0: hdac0: nid: 28 [DISABLED] hdac0: Name: pin: Line-out (None) hdac0: Widget cap: 0x00400701 hdac0: PWR DIGITAL STEREO hdac0: Pin cap: 0x00000010 hdac0: OUT hdac0: Pin config: 0x400001f0 hdac0: Pin control: 0x00000000 hdac0: connections: 1 hdac0: | hdac0: + <- nid=18 [audio output] [DISABLED] hdac0: hdac0: nid: 29 hdac0: Name: pin: Mic (Fixed) hdac0: Widget cap: 0x0040040b hdac0: PWR STEREO hdac0: Association: 1 (0x00000001) hdac0: OSS: monitor (monitor) hdac0: Pin cap: 0x00000020 hdac0: IN hdac0: Pin config: 0x97a70120 hdac0: Pin control: 0x00000020 IN hdac0: Input amp: 0x00270400 hdac0: mute=0 step=4 size=39 offset=0 hdac0: hdac0: nid: 30 [DISABLED] hdac0: Name: vendor widget hdac0: Widget cap: 0x00f00000 hdac0: hdac0: Processing modem FG cad=2 nid=2... hdac0: found-> vendor=0x8086, dev=0x2930, revid=0x03 domain=0, bus=0, slot=31, func=3 class=0c-05-00, hdrtype=0x00, mfdev=0 cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=19 pci0:0:31:3: reprobing on driver added pci2: driver added found-> vendor=0x197b, dev=0x2382, revid=0x00 domain=0, bus=2, slot=0, func=0 class=08-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=16 powerspec 3 supports D0 D3 current D0 MSI supports 1 message pci0:2:0:0: reprobing on driver added found-> vendor=0x197b, dev=0x2381, revid=0x00 domain=0, bus=2, slot=0, func=2 class=08-05-01, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=16 powerspec 3 supports D0 D3 current D0 MSI supports 1 message pci0:2:0:2: reprobing on driver added found-> vendor=0x197b, dev=0x2383, revid=0x00 domain=0, bus=2, slot=0, func=3 class=08-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=16 powerspec 3 supports D0 D3 current D0 MSI supports 1 message pci0:2:0:3: reprobing on driver added pci3: driver added pci4: driver added found-> vendor=0x8086, dev=0x4237, revid=0x00 domain=0, bus=4, slot=0, func=0 class=02-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=18 powerspec 3 supports D0 D3 current D0 MSI supports 1 message, 64 bit pci0:4:0:0: reprobing on driver added pci5: driver added pci7: driver added pci8: driver added pcm0: <HDA Intel G45 HDMI PCM #0 Digital> at cad 0 nid 1 on hdac0 pcm0: +--------------------------------------+ pcm0: | DUMPING PCM Playback/Record Channels | pcm0: +--------------------------------------+ pcm0: pcm0: Playback: pcm0: pcm0: Stream cap: 0x00000005 pcm0: AC3 PCM pcm0: PCM cap: 0x001e07f0 pcm0: 16 20 24 32 bits, 32 44 48 88 96 176 192 KHz pcm0: DAC: 2 pcm0: pcm0: +--------------------------------+ pcm0: | DUMPING Playback/Record Pathes | pcm0: +--------------------------------+ pcm0: pcm0: Playback: pcm0: pcm0: nid=3 [pin: Digital-out (Jack)] pcm0: | pcm0: + <- nid=2 [audio output] [src: pcm] pcm0: pcm0: +-------------------------+ pcm0: | DUMPING Volume Controls | pcm0: +-------------------------+ pcm0: pcm0: Master Volume (OSS: vol) pcm0: | pcm0: +- ctl 1 (nid 3 in ): mute pcm0: pcm0: PCM Volume (OSS: pcm) pcm0: | pcm0: +- ctl 1 (nid 3 in ): mute pcm0: pcm0: Mixer "vol": pcm0: Mixer "pcm": pcm0: clone manager: deadline=750ms flags=0x8000001e pcm0: sndbuf_setmap eda0000, 4000; 0xfffffffe62b20000 -> eda0000 feeder_init(0xffffff0003877a00) on feeder_vchan returned -1 pcm1: <HDA Conexant CX20561 (Hermosa) PCM #0 Analog> at cad 2 nid 1 on hdac0 pcm1: +--------------------------------------+ pcm1: | DUMPING PCM Playback/Record Channels | pcm1: +--------------------------------------+ pcm1: pcm1: Playback: pcm1: pcm1: Stream cap: 0x00000001 pcm1: PCM pcm1: PCM cap: 0x000e0560 pcm1: 16 20 24 bits, 44 48 96 192 KHz pcm1: DAC: 16 pcm1: pcm1: Record: pcm1: pcm1: Stream cap: 0x00000001 pcm1: PCM pcm1: PCM cap: 0x000e0160 pcm1: 16 20 24 bits, 44 48 96 KHz pcm1: ADC: 20 pcm1: pcm1: +--------------------------------+ pcm1: | DUMPING Playback/Record Pathes | pcm1: +--------------------------------+ pcm1: pcm1: Playback: pcm1: pcm1: nid=26 [pin: Speaker (Fixed)] pcm1: | pcm1: + <- nid=16 [audio output] [src: pcm] pcm1: pcm1: Record: pcm1: pcm1: nid=20 [audio input] pcm1: | pcm1: + <- nid=29 [pin: Mic (Fixed)] [src: monitor] pcm1: pcm1: +-------------------------+ pcm1: | DUMPING Volume Controls | pcm1: +-------------------------+ pcm1: pcm1: Master Volume (OSS: vol) pcm1: | pcm1: +- ctl 1 (nid 16 out): -74/0dB (75 steps) pcm1: pcm1: PCM Volume (OSS: pcm) pcm1: | pcm1: +- ctl 1 (nid 16 out): -74/0dB (75 steps) pcm1: pcm1: Microphone2 Volume (OSS: monitor) pcm1: | pcm1: +- ctl 8 (nid 29 out): 0/40dB (5 steps) pcm1: pcm1: Speaker/Beep Volume (OSS: speaker) pcm1: | pcm1: +- ctl 3 (nid 19 out): -18/0dB (4 steps) pcm1: pcm1: Recording Level (OSS: rec) pcm1: | pcm1: +- ctl 4 (nid 20 in 0): -74/6dB (81 steps) pcm1: pcm1: Mixer "vol": pcm1: Mixer "pcm": pcm1: Mixer "speaker": pcm1: Mixer "rec": pcm1: Mixer "ogain": pcm1: Mixer "monitor": pcm1: clone manager: deadline=750ms flags=0x8000001e pcm1: sndbuf_setmap edb0000, 4000; 0xfffffffe62b30000 -> edb0000 pcm1: sndbuf_setmap edc0000, 4000; 0xfffffffe62b40000 -> edc0000 pcm2: <HDA Conexant CX20561 (Hermosa) PCM #1 Analog> at cad 2 nid 1 on hdac0 pcm2: +--------------------------------------+ pcm2: | DUMPING PCM Playback/Record Channels | pcm2: +--------------------------------------+ pcm2: pcm2: Playback: pcm2: pcm2: Stream cap: 0x00000001 pcm2: PCM pcm2: PCM cap: 0x000e0560 pcm2: 16 20 24 bits, 44 48 96 192 KHz pcm2: DAC: 17 pcm2: pcm2: Record: pcm2: pcm2: Stream cap: 0x00000001 pcm2: PCM pcm2: PCM cap: 0x000e0160 pcm2: 16 20 24 bits, 44 48 96 KHz pcm2: ADC: 21 pcm2: pcm2: +--------------------------------+ pcm2: | DUMPING Playback/Record Pathes | pcm2: +--------------------------------+ pcm2: pcm2: Playback: pcm2: pcm2: nid=22 [pin: Headphones (Green Jack)] pcm2: | pcm2: + <- nid=17 [audio output] [src: pcm] pcm2: pcm2: Record: pcm2: pcm2: nid=21 [audio input] pcm2: | pcm2: + <- nid=24 [pin: Mic (Pink Jack)] [src: mic] pcm2: pcm2: +-------------------------+ pcm2: | DUMPING Volume Controls | pcm2: +-------------------------+ pcm2: pcm2: Master Volume (OSS: vol) pcm2: | pcm2: +- ctl 2 (nid 17 out): -74/0dB (75 steps) pcm2: pcm2: PCM Volume (OSS: pcm) pcm2: | pcm2: +- ctl 2 (nid 17 out): -74/0dB (75 steps) pcm2: pcm2: Microphone Volume (OSS: mic) pcm2: | pcm2: +- ctl 7 (nid 24 out): 0/40dB (5 steps) pcm2: pcm2: Recording Level (OSS: rec) pcm2: | pcm2: +- ctl 5 (nid 21 in 0): -74/6dB (81 steps) pcm2: pcm2: Mixer "vol": pcm2: Mixer "pcm": pcm2: Mixer "mic": pcm2: Mixer "rec": pcm2: clone manager: deadline=750ms flags=0x8000001e pcm2: sndbuf_setmap edd0000, 4000; 0xfffffffe62b50000 -> edd0000 pcm2: sndbuf_setmap 38b0000, 4000; 0xfffffffe62b60000 -> 38b0000 feeder_init(0xffffff0003873280) on feeder_vchan returned -1 pci0: driver added found-> vendor=0x8086, dev=0x2930, revid=0x03 domain=0, bus=0, slot=31, func=3 class=0c-05-00, hdrtype=0x00, mfdev=0 cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=19 pci0:0:31:3: reprobing on driver added pci2: driver added found-> vendor=0x197b, dev=0x2382, revid=0x00 domain=0, bus=2, slot=0, func=0 class=08-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=16 powerspec 3 supports D0 D3 current D0 MSI supports 1 message pci0:2:0:0: reprobing on driver added found-> vendor=0x197b, dev=0x2381, revid=0x00 domain=0, bus=2, slot=0, func=2 class=08-05-01, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=16 powerspec 3 supports D0 D3 current D0 MSI supports 1 message pci0:2:0:2: reprobing on driver added sdhci0: <JMicron JMB38X SD> mem 0xf4500400-0xf45004ff irq 16 at device 0.2 on pci2 sdhci0: Reserved 0x100 bytes for rid 0x10 type 3 at 0xf4500400 sdhci0-slot0: 50MHz 4bits 3.3V DMA sdhci0-slot0: ============== REGISTER DUMP ============== sdhci0-slot0: Sys addr: 0x00000000 | Version: 0x0000ac01 sdhci0-slot0: Blk size: 0x00000000 | Blk cnt: 0x00000000 sdhci0-slot0: Argument: 0x00000000 | Trn mode: 0x00000000 sdhci0-slot0: Present: 0x00080000 | Host ctl: 0x00000000 sdhci0-slot0: Power: 0x00000000 | Blk gap: 0x00000000 sdhci0-slot0: Wake-up: 0x00000000 | Clock: 0x00000000 sdhci0-slot0: Timeout: 0x00000000 | Int stat: 0x00000000 sdhci0-slot0: Int enab: 0x01ff00fb | Sig enab: 0x01ff00fb sdhci0-slot0: AC12 err: 0x00000000 | Slot int: 0x00000000 sdhci0-slot0: Caps: 0x014832b2 | Max curr: 0x00000000 sdhci0-slot0: =========================================== sdhci0: 1 slot(s) allocated sdhci0: [MPSAFE] sdhci0: [ITHREAD] found-> vendor=0x197b, dev=0x2383, revid=0x00 domain=0, bus=2, slot=0, func=3 class=08-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=16 powerspec 3 supports D0 D3 current D0 MSI supports 1 message pci0:2:0:3: reprobing on driver added pci3: driver added pci4: driver added found-> vendor=0x8086, dev=0x4237, revid=0x00 domain=0, bus=4, slot=0, func=0 class=02-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=18 powerspec 3 supports D0 D3 current D0 MSI supports 1 message, 64 bit pci0:4:0:0: reprobing on driver added pci5: driver added pci7: driver added pci8: driver added t_delta 15.fb845fe6da424be0 too short pid 976 (sshd) is using legacy pty devices battery0: battery initialization failed, giving up lock order reversal: 1st 0xfffffffe53dd0bf8 bufwait (bufwait) @ /usr/src/sys/kern/vfs_bio.c:2443 2nd 0xffffff0003423a00 dirhash (dirhash) @ /usr/src/sys/ufs/ufs/ufs_dirhash.c:275 KDB: stack backtrace: db_trace_self_wrapper() at db_trace_self_wrapper+0x2a _witness_debugger() at _witness_debugger+0x2e witness_checkorder() at witness_checkorder+0x81e _sx_xlock() at _sx_xlock+0x55 ufsdirhash_acquire() at ufsdirhash_acquire+0x33 ufsdirhash_add() at ufsdirhash_add+0x19 ufs_direnter() at ufs_direnter+0x88b ufs_makeinode() at ufs_makeinode+0x338 VOP_CREATE_APV() at VOP_CREATE_APV+0x8d vn_open_cred() at vn_open_cred+0x479 kern_openat() at kern_openat+0x169 syscall() at syscall+0x1bf Xfast_syscall() at Xfast_syscall+0xab --- syscall (5, FreeBSD ELF64, open), rip = 0x8016351dc, rsp = 0x7fffffffdd08, rbp = 0x15 ---
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200902182100.n1IL05F2072162>