Date: Thu, 3 Aug 2023 11:14:44 -0400 From: Mark Johnston <markj@freebsd.org> To: Shrikanth Kamath <shrikanth07@gmail.com> Cc: freebsd-hackers@freebsd.org Subject: Re: How to watch Active pagequeue transitions with DTrace in the vm layer Message-ID: <ZMvEZIa09GcxKO58@nuc> In-Reply-To: <CAEOAkMXQfAGJTozu98Te3RmMxH-i_q5e2MzQLHdDGPsfciGAbg@mail.gmail.com> References: <CAEOAkMXQfAGJTozu98Te3RmMxH-i_q5e2MzQLHdDGPsfciGAbg@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Thu, Aug 03, 2023 at 12:32:22AM -0700, Shrikanth Kamath wrote:
> A background on the query,
>
> Trying to catch a memory “spike” trigger using DTrace, refer here two “top”
> snapshots captured during a 2 minute window,
>
> last pid: 89900; load averages: 0.75, 0.91, 0.94 up 39+00:37:30
> 20:03:14
>
> Mem: 5575M Active, 2152M Inact, 4731M Laundry, 3044M Wired, 1151M Buf, 382M
> Free
>
> Swap: 8192M Total, 1058M Used, 7134M Free, 12% Inuse
>
> PID USERNAME THR PRI NICE SIZE RES STATE C TIME WCPU COMMAND
>
> 12043 root 5 35 0 11G 9747M kqread 3
> 128.8H 23.34% app1
>
> 12051 root 1 20 0 3089M 2274M select 1 22:51
> 0.00% app2
>
> last pid: 90442; load averages: 1.50, 1.12, 1.02 up 39+00:39:37
> 20:05:21
>
> Mem: 8549M Active, 631M Inact, 3340M Laundry, 3159M Wired, 1252M Buf, 359M
> Free
>
> Swap: 8192M Total, 1894M Used, 6298M Free, 23% Inuse
>
> PID USERNAME THR PRI NICE SIZE RES STATE C TIME WCPU COMMAND
>
> 12043 root 5 24 0 11G 9445M kqread 2
> 128.8H 10.45% app1
>
> 12051 root 1 20 0 3089M 2173M select 3 22:51
> 0.00% app2
>
> The spike is ~3G in Active pages, the two large applications have a
> combined resident size of ~12G. The resident size of the applications
> hasn’t changed between these 2 readings, however there is a tar archive and
> gzip on a large directory during that window likely causing a reshuffle. If
> I count the page allocs and dequeue by execname with DTrace, I see
> tar/vmstat which probably alloc and quickly dequeue, along with a large
> dequeue being undertaken by bufdaemon and pagedaemon.
>
> fbt::vm_page_alloc*:entry
>
> {
>
> @cnt[execname] = count();
>
> }
>
> fbt::vm_page_dequeue:entry
>
> {
>
> @dcnt[execname] = count();
>
> }
>
> Page Alloc
>
> vmstat
> 20222
>
> tar 21284
>
> Page Dequeue
>
> vmstat 20114
>
> bufdaemon 21402
>
> tar 21635
>
> pagedaemon 360387
>
> Since the tar / vmstat will not hold the pages in Active, I need to find
> out what application had its pages queued in Active page queue.
One possibility is that the inactive and laundry queue had previously
contained many referenced pages. Then, when some memory pressure
occurred, the pagedaemon scanned the queues and moved a large number of
pages into the active queue.
> Is it possible that the system is just moving the LRU pages of these two
> large applications into the inactive queue prior to addressing memory
> pressure? Do these applications need to activate those pages later and
> hence it brings it back into the Active queue? How do I watch this in
> action by using DTrace? Will the following probe catch this trigger?
>
> fbt::vm_page_activate:entry
>
> {
>
> @cnt[execname, pid] = count();
>
> }
>
> tick-10sec
>
> {
>
> printa(@cnt);
>
> printf("ACTIVE[%d] pages\n", `vm_dom[0].vmd_pagequeues[1].pq_cnt);
>
> }
>
> *** This system is running only one vmdomain (# sysctl vm.ndomains –>
> vm.ndomains: 1).
>
> *** running release 12.1, on an amd64 kernel. The physical memory installed
> is 16G.
In 12.1, you'd probably want something like:
fbt::vm_page_enqueue:entry
/args[1] == 1 /* PQ_ACTIVE *//
{
...
}
since vm_page_unwire(m, PQ_ACTIVE) will also move a page into the active
queue, but your D script above won't catch that.
I would also look at the "pages reactivated by the page daemon" counter
that appears in vmstat -s output. That'll tell you how many times the
page daemon moved a page from PQ_INACTIVE/PQ_LAUNDRY to PQ_ACTIVE
because it found that the page had been referenced.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?ZMvEZIa09GcxKO58>