Date: Wed, 2 Nov 2005 22:06:47 +0000 From: CP Hennessy <cp.hennessy@openapp.biz> To: freebsd-scsi@freebsd.org Subject: Re: rebuilding an RAID 0+1 disk ( Compaq DL380 with a SmartArray controller) Message-ID: <200511022206.48520.cp.hennessy@openapp.biz> In-Reply-To: <200511022113.17435.cp.hennessy@openapp.biz> References: <200511022113.17435.cp.hennessy@openapp.biz>
next in thread | previous in thread | raw e-mail | index | archive | help
On Wednesday 02 November 2005 21:13, CP Hennessy wrote: > Hi, > > [I've taken over a system which I did not setup and am new to RAID on > FreeBSD, so please be patient with me :) ] > > We have a production server that seems to hang infrequently. The problem > seemed to be related to reading of pages from swap, so I disabled swap and > the problem has not reappeared (yet). When I was finally able to get > physical access to the machine I saw that the led on one of the disks was > flashing yellow, so I suspect that this is the problem. > > I will replace that disk and I want to rebuild the mirror on that disk, but > do not know exactly how. > > I see that the following drivers : > $ pciconf -lv | grep -B 3 mass > ida0@pci0:1:0: class=0x010400 card=0x40400e11 chip=0x00101000 rev=0x02 > hdr=0x00 > vendor = 'LSI Logic (Was: Symbios Logic, NCR)' > device = 'LSI53C1510 I2O-Ready PCI RAID Ultra2 SCSI Controller > (Intelligent mode)' > class = mass storage > -- > atapci0@pci0:15:1: class=0x01018a card=0x00000000 chip=0x02111166 rev=0x00 > hdr=0x00 > vendor = 'Reliance Computer Corp./ServerWorks' > device = 'OSB4 PCI EIDE Controller' > class = mass storage > > What do I need to do to add/remove the new disk to the raid configuration ? > How do I rebuild the mirror ? Oops, I forgot to mention that it is FreeBSD 4.8. CPH
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200511022206.48520.cp.hennessy>