Date: Wed, 24 Jul 2002 11:59:11 -0400 (EDT) From: Kenneth Culver <culverk@yumyumyum.org> To: Christophe Prevotaux <c.prevotaux@hexanet.fr> Cc: smp@FreeBSD.ORG Subject: Re: SMP --> NORMAL KERNEL on a dual proc machine [HELP] Message-ID: <20020724115854.F8800-100000@alpha.yumyumyum.org> In-Reply-To: <20020724170826.56abc9ec.c.prevotaux@hexanet.fr>
next in thread | previous in thread | raw e-mail | index | archive | help
are you using modules for your network cards? did you recompile the modules? Ken On Wed, 24 Jul 2002, Christophe Prevotaux wrote: > Hello > > I am running : > > FreeBSD 4.6-RELEASE-p2 (SMP) > > on a > > > ASUS CUV4X-DLS Dual Processors motherboard (With 2 processors) > which had a onboard 'fxp' network card > > in my PCI slots I have : > > 1 ATM adapter Forerunner PCA200E-SMF 155Mbps > 1 DLINK 500SX Gigabit Ethernet adapter > > > With this configuration I have several problems some of which > may or may not be SMP related but I can't really tell so I need your > help. > > > 1) the "lge" driver hangs sometimes for unknown reason > 2) the "hfa" driver will do the same(and interested people > can looks at the atm@freebsd.org mailing list for details I have posted) > > > 3) In order to see if these problem where SMP related I proceeded to swit= ch > my KERNEL to non SMP > > a) After recompiling my KERNEL to non SMP (standard kernel) my 2 PCI ba= sed > network card (lge0) and (hfa0) refused to work , they are detected a= t boot > time , and get configured properly , but no network traffic goes thr= u (apart > from pinging the IP of the interface itself. > > b) when recompiling in SMP kernel mode , everything works as before > > c) when recompiling in NON SMP KERNEL mode and removing a processor ph= ysically > (replacing it with the needed tab (terminator)) it won't work just = as in point (a) > > > I am at a loss , I do not understand what is going on, I can't believe an= ything else than the > kernel (and maybe modules) need to be recompiled in order to work properl= y. > > What should I do ? > > > > -- > -- > =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D > Christophe Prevotaux Email: c.prevotaux@hexanet.fr > HEXANET SARL URL: http://www.hexanet.fr/ > Z.A.C Les Charmilles Tel: +33 (0)3 26 79 30 05 > 3 All=E9e Thierry Sabine Direct: +33 (0)3 26 61 77 72 > BP202 Fax: +33 (0)3 26 79 30 06 > 51686 Reims Cedex 2 > FRANCE HEXANET Network Operation Center > =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-smp" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-smp" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20020724115854.F8800-100000>