From owner-freebsd-mobile  Mon Nov 23 01:49:16 1998
Return-Path: <owner-freebsd-mobile@FreeBSD.ORG>
Received: (from majordom@localhost)
          by hub.freebsd.org (8.8.8/8.8.8) id BAA22505
          for freebsd-mobile-outgoing; Mon, 23 Nov 1998 01:49:16 -0800 (PST)
          (envelope-from owner-freebsd-mobile@FreeBSD.ORG)
Received: from hotpoint.dcs.qmw.ac.uk (hotpoint.dcs.qmw.ac.uk [138.37.88.162])
          by hub.freebsd.org (8.8.8/8.8.8) with ESMTP id BAA22500
          for <mobile@FreeBSD.ORG>; Mon, 23 Nov 1998 01:49:11 -0800 (PST)
          (envelope-from scott@dcs.qmw.ac.uk)
Received: from scott@it002.dcs.qmw.ac.uk [138.37.94.2];
          by hotpoint.dcs.qmw.ac.uk (8.8.7/8.8.5/S-4.0) with ESMTP;
          id JAA28029; Mon, 23 Nov 1998 09:48:34 GMT
Received: (from scott@localhost) by it002.dcs.qmw.ac.uk (8.8.5/8.7.3) id JAA00441; Mon, 23 Nov 1998 09:48:34 GMT
Message-ID: <19981123094833.B379@dcs.qmw.ac.uk>
Date: Mon, 23 Nov 1998 09:48:33 +0000
From: Scott Mitchell <scott@dcs.qmw.ac.uk>
To: Gildas PERROT <perrot@FranceNet.fr>,
        Matthias Apitz <Matthias.Apitz@Sisis.de>
Cc: mobile@FreeBSD.ORG
Subject: Re: pccardd on FreeBSD 3.0 for 3C589D and Xircom CEM56-100
References: <19981123093505.47024@sisis.de> <199811230900.KAA00634@breizh.francenet.fr>
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii
X-Mailer: Mutt 0.93.2i
In-Reply-To: <199811230900.KAA00634@breizh.francenet.fr>; from Gildas PERROT on Mon, Nov 23, 1998 at 10:00:52AM +0100
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
X-Loop: FreeBSD.org

On Mon, Nov 23, 1998 at 10:00:52AM +0100, Gildas PERROT wrote:
> > On Mon, Nov 23, 1998 at 09:22:49AM +0100, Gildas PERROT wrote:
> > > Hi,
> > > 
> > > I am trying to make those 2 pc-cards working on my Toshiba Satellite Pro 
> > > 490XCDT. The 3C589D was working with the default zp0 kernel entry but I would 
> > > like to use pccardd now. I read that under 3.0, ep0 driver is preferred (why?) 
> > > than zp0 and also read the contrary. SO, I tried to use ep0 *and* zp0 in 
> > > /etc/pccard.conf like that :
> > > 
> > > # Generally available IO ports
> > > io      0x240-0x360
> > > # Generally available IRQs (Built-in sound-card owners remove 5)
> > > irq     3 5 10 11 13 15
> > > # Available memory slots
> > > memory  0xd4000  96k
> > > 
> > > # 3Com Etherlink III 3C589D
> > > card "3Com Corporation" "3C589D"
> > >         config  0x1 "zp0" ?
> >                        ^^^------------ change this to "ep0"
> 
> I suppose I have also to change the lines below :
> 
>         insert  /etc/pccard_ether zp0
>         remove  /sbin/ifconfig zp0 delete
> 
> That's what I try as I said above but I got the same result than for zp0 :
> 
> Nov 23 09:02:55 breizh pccardd[296]: driver allocation failed for 3Com 
> Corporation
> 
> > the other card (Xircom ethernet+modem) isn't supported;
> > 
> > 	matthias
> 
> Any idea if someone is working on that ?
> 

I'm working (very slowly) on the Ethernet part.  AFAIK the modem side of
the card will already work.  I really hope to have something available for
testers insode the next couple of weeks -- stay tuned.

	Scott.

-- 
===========================================================================
Scott Mitchell          | PGP Key ID |"If I can't have my coffee, I'm just 
<scott@dcs.qmw.ac.uk>   | 0x54B171B9 | like a dried up piece of roast goat"
QMW College, London, UK | 0xAA775B8B |     -- J. S. Bach.

To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message