From owner-freebsd-hackers@FreeBSD.ORG Sun Jun 5 11:32:13 2005 Return-Path: X-Original-To: freebsd-hackers@freebsd.org Delivered-To: freebsd-hackers@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id CAEC216A41C for ; Sun, 5 Jun 2005 11:32:13 +0000 (GMT) (envelope-from Thomas.Sparrevohn@btinternet.com) Received: from smtp809.mail.ukl.yahoo.com (smtp809.mail.ukl.yahoo.com [217.12.12.199]) by mx1.FreeBSD.org (Postfix) with SMTP id DC1BF43D48 for ; Sun, 5 Jun 2005 11:32:12 +0000 (GMT) (envelope-from Thomas.Sparrevohn@btinternet.com) Received: (qmail 28027 invoked from network); 5 Jun 2005 11:32:11 -0000 Received: from unknown (HELO w2fzz0vc01.aah-go-on.com) (thomas.sparrevohn@hg1.btinternet.com@81.157.123.116 with plain) by smtp809.mail.ukl.yahoo.com with SMTP; 5 Jun 2005 11:32:09 -0000 From: Thomas Sparrevohn To: freebsd-hackers@freebsd.org Date: Sun, 5 Jun 2005 12:31:57 +0100 User-Agent: KMail/1.8 MIME-Version: 1.0 Content-Type: Multipart/Mixed; boundary="Boundary-00=_tKuoCrLaLn4cyIl" Message-Id: <200506051231.57725.Thomas.Sparrevohn@btinternet.com> Subject: Debugging UMA allocation X-BeenThere: freebsd-hackers@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: Thomas.Sparrevohn@btinternet.com List-Id: Technical Discussions relating to FreeBSD List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 05 Jun 2005 11:32:13 -0000 --Boundary-00=_tKuoCrLaLn4cyIl Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Content-Disposition: inline Hi One of the changes introduced after the 27/05 causes a panic in the initial boot phases in the The panic occurs on my Dell Lattitude C640 when using both my own kernel and the GENERIC kernel. The panic is _mtx_lock_sleep: Recursed on non-recursive mutex in system map I have traced the trigger panic to the first call to uma_zcreate in procinit called from proc0_init - I have just cvs-supped again but the error is still there Unfortunately because it happend before anything is up and running I have no way of producing a kernel dump and as the problem does not seem to be widely reported I assume it is specific to this Dell Laptop type The dmesg included are provided as reference only for the last good compilation of the that I know off e.g. the kernel I know that boots - I have been trying for about 2-3 days which should narrow down the time Can anybody give any advise on how to progress? --Boundary-00=_tKuoCrLaLn4cyIl Content-Type: text/plain; charset="us-ascii"; name="acpidump.txt" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename="acpidump.txt" /* RSD PTR: OEM=DELL, ACPI_Rev=1.0x (0) RSDT=0x000fde64, cksum=47 */ /* RSDT: Length=40, Revision=1, Checksum=165, OEMID=DELL, OEM Table ID=CPi R, OEM Revision=0x27d4010c, Creator ID=ASL, Creator Revision=0x61 Entries={ 0x000fde90 } */ /* FACP: Length=116, Revision=1, Checksum=188, OEMID=DELL, OEM Table ID=CPi R, OEM Revision=0x27d4010c, Creator ID=ASL, Creator Revision=0x61 FACS=0x3ffff800, DSDT=0xfffe4000 INT_MODEL=PIC Preferred_PM_Profile=Unspecified (0) SCI_INT=9 SMI_CMD=0xb2, ACPI_ENABLE=0x70, ACPI_DISABLE=0x71, S4BIOS_REQ=0x97 PSTATE_CNT=0x80 PM1a_EVT_BLK=0x800-0x803 PM1a_CNT_BLK=0x804-0x805 PM2_CNT_BLK=0x820-0x820 PM_TMR_BLK=0x808-0x80b GPE0_BLK=0x828-0x82b GPE1_BLK=0x82c-0x82f, GPE1_BASE=16 P_LVL2_LAT=50 us, P_LVL3_LAT=2000 us FLUSH_SIZE=0, FLUSH_STRIDE=0 DUTY_OFFSET=1, DUTY_WIDTH=3 DAY_ALRM=0, MON_ALRM=0, CENTURY=0 IAPC_BOOT_ARCH= Flags={WBINVD,PROC_C1,PWR_BUTTON,SLP_BUTTON,DCK_CAP} */ /* FACS: Length=64, HwSig=0x000000ff, Firm_Wake_Vec=0x00000000 Global_Lock= Flags=S4BIOS Version=0 */ /* DSDT: Length=12700, Revision=1, Checksum=38, OEMID=INT430, OEM Table ID=SYSFexxx, OEM Revision=0x1001, Creator ID=MSFT, Creator Revision=0x100000e */ --Boundary-00=_tKuoCrLaLn4cyIl Content-Type: text/plain; charset="us-ascii"; name="dmesg.txt" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename="dmesg.txt" 0 255 N 0 9 10 11 pci_link1: irq 11 on acpi0 pci_link1: Links after initial probe: Index IRQ Rtd Ref IRQs 0 11 N 0 5 7 pci_link1: Links after initial validation: Index IRQ Rtd Ref IRQs 0 255 N 0 5 7 pci_link1: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 5 7 pci_link2: irq 11 on acpi0 pci_link2: Links after initial probe: Index IRQ Rtd Ref IRQs 0 11 N 0 9 10 11 pci_link2: Links after initial validation: Index IRQ Rtd Ref IRQs 0 11 N 0 9 10 11 pci_link2: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 9 10 11 pci_link3: irq 11 on acpi0 pci_link3: Links after initial probe: Index IRQ Rtd Ref IRQs 0 11 N 0 5 7 9 10 11 pci_link3: Links after initial validation: Index IRQ Rtd Ref IRQs 0 11 N 0 5 7 9 10 11 pci_link3: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 5 7 9 10 11 ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) cpu0: port 0x530-0x537 on acpi0 acpi_perf0: on cpu0 acpi_throttle0: on cpu0 acpi_throttle0: P_CNT from P_BLK 0x8e0 acpi_acad0: on acpi0 acpi_cmbat0: on acpi0 acpi_cmbat1: on acpi0 acpi_lid0: on acpi0 acpi_button0: on acpi0 acpi_button1: on acpi0 pcib0: port 0xcf8-0xcff on acpi0 pci0: on pcib0 pci0: physical bus=0 found-> vendor=0x8086, dev=0x1a30, revid=0x04 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0106, statreg=0x2090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[10]: type 3, range 32, base e8000000, size 26, enabled found-> vendor=0x8086, dev=0x1a31, revid=0x04 bus=0, slot=1, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x00a0, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x0e (3500 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2482, revid=0x02 bus=0, slot=29, func=0 class=0c-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 map[20]: type 4, range 32, base 0000bf80, size 5, enabled pcib0: matched entry for 0.29.INTA (src \\_SB_.PCI0.LNKA:0) pcib0: slot 29 INTA routed to irq 11 via \\_SB_.PCI0.LNKA found-> vendor=0x8086, dev=0x2484, revid=0x02 bus=0, slot=29, func=1 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 map[20]: type 4, range 32, base 0000bf40, size 5, enabled pcib0: matched entry for 0.29.INTB (src \\_SB_.PCI0.LNKD:0) pcib0: slot 29 INTB routed to irq 11 via \\_SB_.PCI0.LNKD found-> vendor=0x8086, dev=0x2487, revid=0x02 bus=0, slot=29, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=11 map[20]: type 4, range 32, base 0000bf20, size 5, enabled pcib0: matched entry for 0.29.INTC (src \\_SB_.PCI0.LNKC:0) pcib0: slot 29 INTC routed to irq 11 via \\_SB_.PCI0.LNKC found-> vendor=0x8086, dev=0x2448, revid=0x42 bus=0, slot=30, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x0080, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x06 (1500 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x248c, revid=0x02 bus=0, slot=31, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x010f, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x248a, revid=0x02 bus=0, slot=31, func=1 class=01-01-8a, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 map[20]: type 4, range 32, base 0000bfa0, size 4, enabled map[24]: type 1, range 32, base 00000000, size 10, memory disabled found-> vendor=0x8086, dev=0x2485, revid=0x02 bus=0, slot=31, func=5 class=04-01-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 map[10]: type 4, range 32, base 0000d800, size 8, enabled map[14]: type 4, range 32, base 0000dc40, size 6, enabled pcib0: matched entry for 0.31.INTB (src \\_SB_.PCI0.LNKB:0) pci_link1: Picked IRQ 9 with weight 0 pcib0: slot 31 INTB routed to irq 9 via \\_SB_.PCI0.LNKB found-> vendor=0x8086, dev=0x2486, revid=0x02 bus=0, slot=31, func=6 class=07-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 map[10]: type 4, range 32, base 0000d400, size 8, enabled map[14]: type 4, range 32, base 0000d080, size 7, enabled pcib0: matched entry for 0.31.INTB (src \\_SB_.PCI0.LNKB:0) pcib0: slot 31 INTB routed to irq 9 via \\_SB_.PCI0.LNKB agp0: mem 0xe8000000-0xebffffff at device 0.0 on pci0 agp0: Reserved 0x4000000 bytes for rid 0x10 type 3 at 0xe8000000 agp0: allocating GATT for aperture of size 64M pcib1: at device 1.0 on pci0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0xc000-0xcfff pcib1: memory decode 0xfc000000-0xfdffffff pcib1: prefetched decode 0xe0000000-0xe7ffffff pci1: on pcib1 pci1: physical bus=1 found-> vendor=0x1002, dev=0x4c57, revid=0x00 bus=1, slot=0, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x01a7, statreg=0x02b0, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 3, range 32, base e0000000, size 27, enabled pcib1: (null) requested memory range 0xe0000000-0xe7ffffff: good map[14]: type 4, range 32, base 0000c000, size 8, enabled pcib1: (null) requested I/O range 0xc000-0xc0ff: in range map[18]: type 1, range 32, base fcff0000, size 16, enabled pcib1: (null) requested memory range 0xfcff0000-0xfcffffff: good pcib1: matched entry for 1.0.INTA (src \\_SB_.PCI0.LNKA:0) pcib1: slot 0 INTA routed to irq 11 via \\_SB_.PCI0.LNKA pci1: at device 0.0 (no driver attached) uhci0: port 0xbf80-0xbf9f irq 11 at device 29.0 on pci0 uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xbf80 uhci0: [GIANT-LOCKED] usb0: on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: port 0xbf40-0xbf5f irq 11 at device 29.1 on pci0 uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0xbf40 uhci1: [GIANT-LOCKED] usb1: on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: port 0xbf20-0xbf3f irq 11 at device 29.2 on pci0 uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0xbf20 uhci2: [GIANT-LOCKED] usb2: on uhci2 usb2: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered pcib2: at device 30.0 on pci0 pcib2: secondary bus 2 pcib2: subordinate bus 16 pcib2: I/O decode 0xe000-0xffff pcib2: memory decode 0xf4000000-0xfbffffff pcib2: prefetched decode 0xfff00000-0xfffff pcib2: Subtractively decoded bridge. pci2: on pcib2 pci2: physical bus=2 found-> vendor=0x10b7, dev=0x9200, revid=0x78 bus=2, slot=0, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0117, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x0a (2500 ns), maxlat=0x0a (2500 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 4, range 32, base 0000ec80, size 7, enabled pcib2: (null) requested I/O range 0xec80-0xecff: in range map[14]: type 1, range 32, base f8fffc00, size 7, enabled pcib2: (null) requested memory range 0xf8fffc00-0xf8fffc7f: good pcib2: matched entry for 2.0.INTA (src \\_SB_.PCI0.LNKC:0) pcib2: slot 0 INTA routed to irq 11 via \\_SB_.PCI0.LNKC found-> vendor=0x104c, dev=0xac51, revid=0x00 bus=2, slot=1, func=0 class=06-07-00, hdrtype=0x02, mfdev=1 cmdreg=0x0000, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x40 (16000 ns), maxlat=0x07 (1750 ns) intpin=a, irq=255 powerspec 1 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base 00000000, size 12, memory disabled found-> vendor=0x104c, dev=0xac51, revid=0x00 bus=2, slot=1, func=1 class=06-07-00, hdrtype=0x02, mfdev=1 cmdreg=0x0000, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x40 (16000 ns), maxlat=0x07 (1750 ns) intpin=a, irq=255 powerspec 1 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base 00000000, size 12, memory disabled found-> vendor=0x104c, dev=0xac50, revid=0x01 bus=2, slot=3, func=0 class=06-07-00, hdrtype=0x02, mfdev=0 cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x40 (16000 ns), maxlat=0x03 (750 ns) intpin=a, irq=11 powerspec 1 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base 00000000, size 12, enabled pcib2: matched entry for 2.3.INTA (src \\_SB_.PCI0.LNKB:0) pcib2: slot 3 INTA routed to irq 9 via \\_SB_.PCI0.LNKB found-> vendor=0x10b7, dev=0x9200, revid=0x78 bus=2, slot=8, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0117, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x0a (2500 ns), maxlat=0x0a (2500 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 4, range 32, base 0000ec00, size 7, enabled pcib2: (null) requested I/O range 0xec00-0xec7f: in range map[14]: type 1, range 32, base f8fff800, size 7, enabled pcib2: (null) requested memory range 0xf8fff800-0xf8fff87f: good pcib2: matched entry for 2.8.INTA (src \\_SB_.PCI0.LNKC:0) pcib2: slot 8 INTA routed to irq 11 via \\_SB_.PCI0.LNKC xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xec80-0xecff mem 0xf8fffc00-0xf8fffc7f irq 11 at device 0.0 on pci2 xl0: Reserved 0x80 bytes for rid 0x14 type 3 at 0xf8fffc00 xl0: using memory mapped I/O xl0: media options word: a xl0: found MII/AUTO miibus0: on xl0 ukphy0: on miibus0 ukphy0: OUI 0x00105a, model 0x0000, rev. 0 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto xl0: bpf attached xl0: Ethernet address: 00:0b:db:07:25:10 xl0: [MPSAFE] cbb0: at device 1.0 on pci2 pcib2: cbb0 requested memory range 0xf4000000-0xfbffffff: good cbb0: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0xf4000000 cardbus0: on cbb0 pccard0: <16-bit PCCard bus> on cbb0 pcib2: matched entry for 2.1.INTA (src \\_SB_.PCI0.LNKD:0) pcib2: slot 1 INTA routed to irq 11 via \\_SB_.PCI0.LNKD cbb0: [MPSAFE] cbb0: PCI Configuration space: 0x00: 0xac51104c 0x02100007 0x06070000 0x00822008 0x10: 0xf4000000 0x020000a0 0x20040400 0xfffff000 0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc 0x30: 0x00000000 0xfffffffc 0x00000000 0x0740010b 0x40: 0x012a1028 0x00000001 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x2024d025 0x00000000 0x00000000 0x01261222 0x90: 0x6064a6c0 0x00000000 0x00000000 0x00000000 0xa0: 0xfe110001 0x00c00000 0x00000000 0x00000017 0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 cbb1: at device 1.1 on pci2 pcib2: cbb1 requested memory range 0xf4000000-0xfbffffff: good cbb1: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0xf4001000 cardbus1: on cbb1 pccard1: <16-bit PCCard bus> on cbb1 pcib2: matched entry for 2.1.INTA (src \\_SB_.PCI0.LNKD:0) pcib2: slot 1 INTA routed to irq 11 via \\_SB_.PCI0.LNKD cbb1: [MPSAFE] cbb1: PCI Configuration space: 0x00: 0xac51104c 0x02100007 0x06070000 0x00822008 0x10: 0xf4001000 0x020000a0 0x20050500 0xfffff000 0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc 0x30: 0x00000000 0xfffffffc 0x00000000 0x0740010b 0x40: 0x012a1028 0x00000001 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x2024d025 0x00000000 0x00000000 0x01261222 0x90: 0x6064a6c0 0x00000000 0x00000000 0x00000000 0xa0: 0xfe110001 0x00c00000 0x00000000 0x00000017 0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 cbb2: irq 9 at device 3.0 on pci2 pcib2: cbb2 requested memory range 0xf4000000-0xfbffffff: good cbb2: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0xf4002000 cardbus2: on cbb2 pccard2: <16-bit PCCard bus> on cbb2 cbb2: [MPSAFE] cbb2: PCI Configuration space: 0x00: 0xac50104c 0x02100007 0x06070001 0x00022008 0x10: 0xf4002000 0x020000a0 0x20040302 0xfffff000 0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc 0x30: 0x00000000 0xfffffffc 0x00000000 0x07400109 0x40: 0xab0112a3 0x00000001 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x0044b060 0x00000000 0x00000000 0x01000002 0x90: 0x616000c0 0x00000000 0x00000000 0x00000000 0xa0: 0xfe110001 0x00c00000 0x0000000f 0x0000001b 0xb0: 0x08000000 0x00000000 0x00000000 0x00000000 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 xl1: <3Com 3c905C-TX Fast Etherlink XL> port 0xec00-0xec7f mem 0xf8fff800-0xf8fff87f irq 11 at device 8.0 on pci2 xl1: Reserved 0x80 bytes for rid 0x14 type 3 at 0xf8fff800 xl1: using memory mapped I/O xl1: media options word: a xl1: found MII/AUTO miibus1: on xl1 ukphy1: on miibus1 ukphy1: OUI 0x00105a, model 0x0000, rev. 0 ukphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto xl1: bpf attached xl1: Ethernet address: 00:0b:db:21:b7:c6 xl1: [MPSAFE] isab0: at device 31.0 on pci0 isa0: on isab0 atapci0: port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xbfa0-0xbfaf at device 31.1 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xbfa0 ata0: on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=03 ostat0=50 ostat1=00 ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 ata0: stat1=0x00 err=0x01 lsb=0x00 msb=0x00 ata0: reset tp2 stat0=50 stat1=00 devices=0x1 ata0: [MPSAFE] ata1: on atapci0 atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 ata1: reset tp1 mask=03 ostat0=50 ostat1=00 ata1: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb ata1: stat1=0x00 err=0x00 lsb=0x00 msb=0x00 ata1: reset tp2 stat0=00 stat1=00 devices=0x4 ata1: [MPSAFE] pcm0: port 0xd800-0xd8ff,0xdc40-0xdc7f irq 9 at device 31.5 on pci0 pcm0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xd800 pcm0: Reserved 0x40 bytes for rid 0x14 type 4 at 0xdc40 pcm0: [GIANT-LOCKED] pcm0: pcm0: Codec features mic channel, tone, simulated stereo, bass boost, 20 bit DAC, 18 bit ADC, 5 bit master volume, SRS 3D Stereo Enhancement pcm0: Primary codec extended features variable rate PCM, variable rate mic, AMAP pcm0: sndbuf_setmap 3e9eb000, 4000; 0xe90fc000 -> 3e9eb000 pcm0: sndbuf_setmap 3e9e6000, 4000; 0xe9100000 -> 3e9e6000 pcm0: sndbuf_setmap 3e9da000, 4000; 0xe9104000 -> 3e9da000 pci0: at device 31.6 (no driver attached) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) acpi_tz0: port 0x530-0x537 on acpi0 mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) psmcpnp0: irq 12 on acpi0 atkbdc0: port 0x60,0x64 irq 1 on acpi0 atkbd0: irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0065 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 atkbd0: [GIANT-LOCKED] psm0: current command byte:0065 psm0: irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons psm0: config:00000000, flags:00000008, packet size:3 psm0: syncmask:c0, syncbits:00 fdc0: port 0x3f2-0x3f5,0x3f7 irq 6 drq 2 on acpi0 fdc0: ic_type 90 part_id 80 fdc0: [MPSAFE] fdc0: [FAST] sio0: irq maps: 0x1 0x11 0x1 0x1 sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A sio1: irq maps: 0x1 0x9 0x1 0x1 sio1 port 0x2f8-0x2ff,0x280-0x287 irq 3 drq 3 on acpi0 sio1: type 16550A ppc0: using extended I/O port range ppc0: ECP SPP ECP+EPP SPP ppc0: port 0x378-0x37f,0x778-0x77b irq 7 drq 1 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold ppbus0: on ppc0 plip0: on ppbus0 plip0: bpf attached lpt0: on ppbus0 lpt0: Interrupt-driven port ppi0: on ppbus0 mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it atkbdc: atkbdc0 already exists; skipping it fdc: fdc0 already exists; skipping it ppc: ppc0 already exists; skipping it sio: sio0 already exists; skipping it sio: sio1 already exists; skipping it pnp_identify: Trying Read_Port at 203 pnp_identify: Trying Read_Port at 243 pnp_identify: Trying Read_Port at 283 pnp_identify: Trying Read_Port at 2c3 pnp_identify: Trying Read_Port at 303 pnp_identify: Trying Read_Port at 343 pnp_identify: Trying Read_Port at 383 pnp_identify: Trying Read_Port at 3c3 PNP Identify complete sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices pmtimer0 on isa0 orm0: at iomem 0xc0000-0xcefff,0xcf000-0xcf7ff,0xcf800-0xcffff on isa0 adv0: not probed (disabled) aha0: not probed (disabled) aic0: not probed (disabled) bt0: not probed (disabled) cs0: not probed (disabled) ed0: not probed (disabled) fe0: not probed (disabled) ie0: not probed (disabled) lnc0: not probed (disabled) sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) sio2: not probed (disabled) sio3: not probed (disabled) sn0: not probed (disabled) vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 vt0: not probed (disabled) isa_probe_children: probing PnP devices uhub3: vendor 0x0451 General Purpose USB Hub, class 9/0, rev 1.10/1.01, addr 2 uhub3: 2 ports with 0 removable, bus powered ukbd0: Logitech USB Receiver, rev 1.10/24.04, addr 3, iclass 3/1 kbd: new array size 4 kbd1 at ukbd0 kbd1: ukbd0, generic (0), config:0x0, flags:0x1d0000 ums0: Logitech USB Receiver, rev 1.10/24.04, addr 3, iclass 3/1 ums0: 7 buttons and Z dir. uhub4: vendor 0x050d product 0x0237, class 9/0, rev 2.00/1.00, addr 2 uhub4: 7 ports with 7 removable, self powered ugen0: LEGO Group LEGO USB Tower, rev 1.10/1.00, addr 3 umass0: LEXR PLUG DRIVE LEXR PLUG DRIVE, rev 1.10/0.01, addr 4 umass0:0:0:-1: Attached to scbus0 umass1: Generic Mass Storage Device, rev 1.10/1.00, addr 5 umass1: Get Max Lun not supported (STALLED) umass1:1:1:-1: Attached to scbus1 Device configuration finished. procfs registered Timecounter "TSC" frequency 1794712884 Hz quality 800 Timecounters tick every 1.000 msec lo0: bpf attached acpi_acad0: acline initialization start acpi_acad0: On Line acpi_acad0: acline initialization done, tried 1 times acpi_cmbat0: battery initialization start acpi_cmbat1: battery initialization start fdc0: output ready timeout fdc0: output ready timeout fdc0: output ready timeout fdc0: output ready timeout fdc0: output ready timeout fdc0: output ready timeout fdc0: output ready timeout ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=80 wire ad0: setting PIO4 on Intel ICH3 chip ad0: setting UDMA100 on Intel ICH3 chip ad0: 38154MB at ata0-master UDMA100 ad0: 78140160 sectors [77520C/16H/63S] 16 sectors/interrupt 1 depth queue GEOM: new disk ad0 pcib2: pccard2 requested memory range 0xf4000000-0xfbffffff: good pccard2: CIS version PC Card Standard 5.0 pccard2: CIS info: Dell, TrueMobile 1150 Series PC Card, Version 01.01, pccard2: Manufacturer code 0x156, product 0x2 pccard2: function 0: network adapter, ccr addr 3e0 mask 1 pccard2: function 0, config table entry 1: I/O card; irq mask ffff; iomask 6, iospace 0-3f; io16 irqpulse irqlevel pcib2: pccard2 requested I/O range 0xe000-0xffff: in range pcib2: pccard2 requested memory range 0xf4000000-0xfbffffff: good wi0: at port 0xe000-0xe03f irq 9 function 0 config 1 on pccard2 wi0: [MPSAFE] wi0: using Lucent Embedded WaveLAN/IEEE wi0: Lucent Firmware: Station (8.10.1) wi0: bpf attached wi0: Ethernet address: 00:02:2d:7b:df:c4 wi0: bpf attached wi0: bpf attached wi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps fdc0: output ready timeout fdc0: input ready timeout fdc0: input ready timeout fdc0: output ready timeout fdc0: input ready timeout fdc0: input ready timeout fdc0: output ready timeout fdc0: input ready timeout fdc0: input ready timeout fdc0: output ready timeout fdc0: input ready timeout fdc0: input ready timeout ad0: Intel check1 failed ad0: Adaptec check1 failed ad0: LSI (v3) check1 failed ad0: LSI (v2) check1 failed ad0: FreeBSD check1 failed ata1-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire acd0: setting PIO4 on Intel ICH3 chip acd0: setting UDMA33 on Intel ICH3 chip acd0: CDRW drive at ata1 as master acd0: 2048KB buffer, UDMA33 acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, packet acd0: Writes: CDR, CDRW, test write, burnproof acd0: Audio: play, 255 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: no/blank disc pcm0: measured ac97 link rate at 48001 Hz, will use 48000 Hz pass0 at umass-sim0 bus 0 target 0 lun 0 pass0: Removable Direct Access SCSI-2 device pass0: Serial Number [ pass0: 1.000MB/s transfers pass1 at umass-sim1 bus 1 target 0 lun 0 pass1: Removable Direct Access SCSI-2 device pass1: Serial Number \^_ pass1: 1.000MB/s transfers ATA PseudoRAID loaded da1 at umass-sim1 bus 1 target 0 lun 0 da1: Removable Direct Access SCSI-2 device da1: Serial Number \^_ da1: 1.000MB/s transfers da1: 125MB (256000 512 byte sectors: 64H 32S/T 125C) da0 at umass-sim0 bus 0 target 0 lun 0 da0: Removable Direct Access SCSI-2 device da0: Serial Number [ da0: 1.000MB/s transfers da0: 61MB (125952 512 byte sectors: 64H 32S/T 61C) GEOM: new disk da0 GEOM: new disk da1 acpi_cmbat0: battery initialization done, tried 1 times Trying to mount root from ufs:/dev/ad0s1a start_init: trying /sbin/init Linux ELF exec handler installed linprocfs registered splash: image decoder found: daemon_saver acpi_cmbat1: battery initialization failed, giving up pci0: driver added found-> vendor=0x8086, dev=0x2486, revid=0x02 bus=0, slot=31, func=6 class=07-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=9 pci0:31:6: reprobing on driver added pci1: driver added found-> vendor=0x1002, dev=0x4c57, revid=0x00 bus=1, slot=0, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x01a7, statreg=0x02b0, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 pci1:0:0: reprobing on driver added drm0: port 0xc000-0xc0ff mem 0xe0000000-0xe7ffffff,0xfcff0000-0xfcffffff irq 11 at device 0.0 on pci1 drm0: Reserved 0x10000 bytes for rid 0x18 type 3 at 0xfcff0000 pcib1: drm0 requested memory range 0xfcff0000-0xfcffffff: good pcib1: drm0 requested memory range 0xfcff0000-0xfcffffff: good drm0: Reserved 0x8000000 bytes for rid 0x10 type 3 at 0xe0000000 pcib1: drm0 requested memory range 0xe0000000-0xe7ffffff: good pcib1: drm0 requested memory range 0xe0000000-0xe7ffffff: good info: [drm] AGP at 0xe8000000 64MB info: [drm] Initialized radeon 1.16.0 20050311 on minor 0 pci2: driver added agp0: Setting AGP v2 mode 1 drm0: [MPSAFE] --Boundary-00=_tKuoCrLaLn4cyIl Content-Type: text/plain; charset="us-ascii"; name="dmidecode.txt" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename="dmidecode.txt" # dmidecode 2.6 SMBIOS 2.3 present. 61 structures occupying 2338 bytes. Table at 0x000F76A0. Handle 0xDA00 DMI type 218, 203 bytes. OEM-specific Type Header and Data: DA CB 00 DA B2 00 0D 1F 0F 17 40 6F 00 00 00 01 00 70 00 00 00 00 00 71 00 02 00 01 00 72 00 02 00 00 00 7B 00 04 00 00 00 7C 00 06 00 00 00 79 00 08 00 00 00 7D 00 0A 00 00 00 7E 00 0C 00 00 00 78 00 0E 00 01 00 77 00 0E 00 00 00 73 00 10 00 01 00 74 00 10 00 00 00 7A 00 11 00 00 00 7F 00 12 00 00 00 40 00 13 00 01 00 41 00 13 00 00 00 1E 00 14 00 00 00 1F 00 14 00 01 00 20 00 14 00 02 00 21 00 14 00 03 00 75 00 15 00 01 00 76 00 15 00 00 00 00 80 00 80 00 00 00 A0 00 A0 01 00 05 80 05 80 01 00 01 F0 01 F0 00 00 02 F0 02 F0 00 00 03 F0 03 F0 00 00 04 F0 04 F0 00 00 05 F0 05 F0 00 00 FF FF 00 00 00 00 Handle 0x0000 DMI type 0, 20 bytes. BIOS Information Vendor: Dell Computer Corporation Version: A10 Release Date: 01/12/2004 Address: 0xF0000 Runtime Size: 64 kB ROM Size: 512 kB Characteristics: PCI is supported PC Card (PCMCIA) is supported PNP is supported APM is supported BIOS is upgradeable BIOS shadowing is allowed Boot from CD is supported Selectable boot is supported Boot from PC Card (PCMCIA) is supported 3.5"/720 KB floppy services are supported (int 13h) Print screen service is supported (int 5h) 8042 keyboard services are supported (int 9h) Serial services are supported (int 14h) Printer services are supported (int 17h) CGA/mono video services are supported (int 10h) ACPI is supported USB legacy is supported AGP is supported LS-120 boot is supported ATAPI Zip drive boot is supported Smart battery is supported BIOS boot specification is supported Handle 0x0100 DMI type 1, 25 bytes. System Information Manufacturer: Dell Computer Corporation Product Name: Latitude C640 Version: Not Specified Serial Number: 3V54Q0J UUID: 44454C4C-5600-1035-8034-B3C04F51304A Wake-up Type: Power Switch Handle 0x0200 DMI type 2, 9 bytes. Base Board Information Manufacturer: Dell Computer Corporation Product Name: Version: Serial Number: .3V54Q0J. . Handle 0x0300 DMI type 3, 13 bytes. Chassis Information Manufacturer: Dell Computer Corporation Type: Portable Lock: Not Present Version: Not Specified Serial Number: 3V54Q0J Asset Tag: Not Specified Boot-up State: Safe Power Supply State: Safe Thermal State: Safe Security Status: None Handle 0x0301 DMI type 3, 13 bytes. Chassis Information Manufacturer: Dell Computer Corporation Type: Docking Station Lock: Not Present Version: Not Specified Serial Number: 00C0ADADADAD Asset Tag: Not Specified Boot-up State: Safe Power Supply State: Safe Thermal State: Safe Security Status: None Handle 0x0400 DMI type 4, 32 bytes. Processor Information Socket Designation: Microprocessor Type: Central Processor Family: Pentium 4 Manufacturer: Intel ID: 27 0F 00 00 FF F9 EB BF Signature: Type 0, Family 15, Model 2, Stepping 7 Flags: FPU (Floating-point unit on-chip) VME (Virtual mode extension) DE (Debugging extension) PSE (Page size extension) TSC (Time stamp counter) MSR (Model specific registers) PAE (Physical address extension) MCE (Machine check exception) CX8 (CMPXCHG8 instruction supported) SEP (Fast system call) MTRR (Memory type range registers) PGE (Page global enable) MCA (Machine check architecture) CMOV (Conditional move instruction supported) PAT (Page attribute table) PSE-36 (36-bit page size extension) CLFSH (CLFLUSH instruction supported) DS (Debug store) ACPI (ACPI supported) MMX (MMX technology supported) FXSR (Fast floating-point save and restore) SSE (Streaming SIMD extensions) SSE2 (Streaming SIMD extensions 2) SS (Self-snoop) HTT (Hyper-threading technology) TM (Thermal monitor supported) PBE (Pending break enabled) Version: Not Specified Voltage: 3.3 V External Clock: 133 MHz Max Speed: 2400 MHz Current Speed: 1800 MHz Status: Populated, Enabled Upgrade: None L1 Cache Handle: 0x0700 L2 Cache Handle: 0x0701 L3 Cache Handle: Not Provided Handle 0x0700 DMI type 7, 19 bytes. Cache Information Socket Designation: Not Specified Configuration: Enabled, Not Socketed, Level 1 Operational Mode: Write Back Location: Internal Installed Size: 8 KB Maximum Size: 8 KB Supported SRAM Types: Unknown Installed SRAM Type: Unknown Speed: Unknown Error Correction Type: None System Type: Data Associativity: 4-way Set-associative Handle 0x0701 DMI type 7, 19 bytes. Cache Information Socket Designation: Not Specified Configuration: Enabled, Not Socketed, Level 2 Operational Mode: Varies With Memory Address Location: Internal Installed Size: 512 KB Maximum Size: 512 KB Supported SRAM Types: Pipeline Burst Installed SRAM Type: Pipeline Burst Speed: 15 ns Error Correction Type: None System Type: Unified Associativity: Other Handle 0x0800 DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: PARALLEL Internal Connector Type: None External Reference Designator: Not Specified External Connector Type: DB-25 female Port Type: Parallel Port PS/2 Handle 0x0801 DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: SERIAL1 Internal Connector Type: None External Reference Designator: Not Specified External Connector Type: DB-9 male Port Type: Serial Port 16550A Compatible Handle 0x0802 DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: PS/2 Internal Connector Type: None External Reference Designator: Not Specified External Connector Type: Mini DIN Port Type: Mouse Port Handle 0x0803 DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: PS/2 Internal Connector Type: None External Reference Designator: Not Specified External Connector Type: Mini DIN Port Type: Mouse Port Handle 0x0804 DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: USB Internal Connector Type: None External Reference Designator: Not Specified External Connector Type: Access Bus (USB) Port Type: USB Handle 0x0805 DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: USB Internal Connector Type: None External Reference Designator: Not Specified External Connector Type: Access Bus (USB) Port Type: USB Handle 0x0806 DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: MONITOR Internal Connector Type: None External Reference Designator: Not Specified External Connector Type: DB-15 female Port Type: Video Port Handle 0x0807 DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: ENET Internal Connector Type: None External Reference Designator: Not Specified External Connector Type: RJ-45 Port Type: Network Port Handle 0x0808 DMI type 126, 9 bytes. Inactive Handle 0x0809 DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: IrDA Internal Connector Type: None External Reference Designator: Not Specified External Connector Type: Infrared Port Type: Other Handle 0x080A DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: S-Video Internal Connector Type: None External Reference Designator: Not Specified External Connector Type: Mini DIN Port Type: Video Port Handle 0x080C DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: Modem Internal Connector Type: None External Reference Designator: Not Specified External Connector Type: RJ-11 Port Type: Modem Port Handle 0x080D DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: Ethernet Internal Connector Type: None External Reference Designator: Not Specified External Connector Type: RJ-45 Port Type: Network Port Handle 0x0900 DMI type 9, 13 bytes. System Slot Information Designation: PCMCIA 0 Type: 32-bit PC Card (PCMCIA) Current Usage: Available Length: Other ID: Adapter 0, Socket 0 Characteristics: 5.0 V is provided 3.3 V is provided PC Card-16 is supported Cardbus is supported Zoom Video is supported Modem ring resume is supported Handle 0x0901 DMI type 9, 13 bytes. System Slot Information Designation: PCMCIA 1 Type: 32-bit PC Card (PCMCIA) Current Usage: Available Length: Other ID: Adapter 10, Socket 0 Characteristics: 5.0 V is provided 3.3 V is provided PC Card-16 is supported Cardbus is supported Modem ring resume is supported Handle 0x0902 DMI type 126, 13 bytes. Inactive Handle 0x0903 DMI type 126, 13 bytes. Inactive Handle 0x0904 DMI type 9, 13 bytes. System Slot Information Designation: MiniPCI Type: 32-bit Other Current Usage: Available Length: Other Characteristics: 5.0 V is provided 3.3 V is provided PME signal is supported Handle 0x0A00 DMI type 10, 6 bytes. On Board Device Information Type: Video Status: Enabled Description: ATI Mobility M7 Handle 0x0A01 DMI type 10, 6 bytes. On Board Device Information Type: Sound Status: Enabled Description: Crystal 4205 Handle 0x0A02 DMI type 10, 6 bytes. On Board Device Information Type: Ethernet Status: Enabled Description: Handle 0x0A03 DMI type 126, 6 bytes. Inactive Handle 0x0B00 DMI type 11, 5 bytes. OEM Strings String 1: Dell System String 2: 5[0593] Handle 0x0D00 DMI type 13, 22 bytes. BIOS Language Information Installable Languages: 1 en|US|iso8859-1 Currently Installed Language: en|US|iso8859-1 Handle 0x1000 DMI type 16, 15 bytes. Physical Memory Array Location: System Board Or Motherboard Use: System Memory Error Correction Type: None Maximum Capacity: 1 GB Error Information Handle: Not Provided Number Of Devices: 2 Handle 0x1100 DMI type 17, 27 bytes. Memory Device Array Handle: 0x1000 Error Information Handle: Not Provided Total Width: 64 bits Data Width: 64 bits Size: 512 MB Form Factor: DIMM Set: None Locator: DIMM_A Bank Locator: Not Specified Type: DDR Type Detail: Synchronous Speed: 266 MHz (3.8 ns) Manufacturer: Not Specified Serial Number: Not Specified Asset Tag: Not Specified Part Number: Handle 0x1101 DMI type 17, 27 bytes. Memory Device Array Handle: 0x1000 Error Information Handle: Not Provided Total Width: 64 bits Data Width: 64 bits Size: 512 MB Form Factor: DIMM Set: None Locator: DIMM_B Bank Locator: Not Specified Type: DDR Type Detail: Synchronous Speed: 266 MHz (3.8 ns) Manufacturer: Not Specified Serial Number: Not Specified Asset Tag: Not Specified Part Number: Handle 0x1300 DMI type 19, 15 bytes. Memory Array Mapped Address Starting Address: 0x00000000000 Ending Address: 0x0000009FFFF Range Size: 640 kB Physical Array Handle: 0x1000 Partition Width: 0 Handle 0x1301 DMI type 19, 15 bytes. Memory Array Mapped Address Starting Address: 0x00000100000 Ending Address: 0x0003FFFFFFF Range Size: 1023 MB Physical Array Handle: 0x1000 Partition Width: 0 Handle 0x1400 DMI type 20, 19 bytes. Memory Device Mapped Address Starting Address: 0x00000000000 Ending Address: 0x0000009FFFF Range Size: 640 kB Physical Device Handle: 0x1100 Memory Array Mapped Address Handle: 0x1300 Partition Row Position: 1 Handle 0x1401 DMI type 20, 19 bytes. Memory Device Mapped Address Starting Address: 0x00000100000 Ending Address: 0x0001FFFFFFF Range Size: 511 MB Physical Device Handle: 0x1100 Memory Array Mapped Address Handle: 0x1301 Partition Row Position: 1 Handle 0x1402 DMI type 20, 19 bytes. Memory Device Mapped Address Starting Address: 0x00020000000 Ending Address: 0x0003FFFFFFF Range Size: 512 MB Physical Device Handle: 0x1101 Memory Array Mapped Address Handle: 0x1301 Partition Row Position: 1 Handle 0x1500 DMI type 21, 7 bytes. Built-in Pointing Device Type: Touch Pad Interface: Bus Mouse Buttons: 2 Handle 0x1600 DMI type 22, 26 bytes. Portable Battery Location: Left Module Bay Manufacturer: Sony Corp. Name: LIP8120DLP Design Capacity: 65120 mWh Design Voltage: 14800 mV SBDS Version: 1.0 Maximum Error: 30% SBDS Serial Number: AAC1 SBDS Manufacture Date: 2003-04-03 SBDS Chemistry: LION OEM-specific Information: 0x00000001 Handle 0x1601 DMI type 126, 26 bytes. Inactive Handle 0x1B00 DMI type 27, 12 bytes. Cooling Device Type: Fan Status: OK OEM-specific Information: 0x0000DD00 Handle 0x1C00 DMI type 28, 20 bytes. Temperature Probe Description: CPU Internal Temperature Location: Processor Status: OK Maximum Value: 127.0 deg C Minimum Value 0.0 deg C Resolution: 1.000 deg C Tolerance: 0.5 deg C Accuracy: Unknown OEM-specific Information: 0x0000DC00 Handle 0x2000 DMI type 32, 11 bytes. System Boot Information Status: No errors detected Handle 0xD000 DMI type 208, 10 bytes. OEM-specific Type Header and Data: D0 0A 00 D0 01 04 FE 00 2A 01 Handle 0xD100 DMI type 209, 12 bytes. OEM-specific Type Header and Data: D1 0C 00 D1 00 00 00 03 04 07 80 05 Handle 0xD200 DMI type 210, 12 bytes. OEM-specific Type Header and Data: D2 0C 00 D2 F8 03 04 03 06 80 04 05 Handle 0xD300 DMI type 211, 13 bytes. OEM-specific Type Header and Data: D3 0D 00 D3 01 03 02 01 00 00 00 00 02 Strings: Back of System Handle 0xD800 DMI type 216, 9 bytes. OEM-specific Type Header and Data: D8 09 00 D8 01 03 01 F0 03 Strings: ATI Technologies Inc. .0 VR006.006.006.00 Handle 0xD900 DMI type 217, 8 bytes. OEM-specific Type Header and Data: D9 08 00 D9 01 02 01 03 Strings: US-101 Proprietary Handle 0xDB00 DMI type 219, 8 bytes. OEM-specific Type Header and Data: DB 08 00 DB 03 01 02 03 Strings: System Device Bay Floppy, Battery, CD-ROM, CD-RW, Hard Disk, LS-120, DVD, ZIP CDRW+DVD Handle 0xDB01 DMI type 126, 8 bytes. Inactive Handle 0xDC00 DMI type 220, 22 bytes. OEM-specific Type Header and Data: DC 16 00 DC 01 F0 00 00 02 F0 00 00 00 00 03 F0 04 F0 00 00 00 00 Handle 0xDD00 DMI type 221, 19 bytes. OEM-specific Type Header and Data: DD 13 00 DD 00 00 00 00 00 05 F0 00 00 00 00 00 00 00 00 Handle 0xD400 DMI type 212, 192 bytes. OEM-specific Type Header and Data: D4 C0 00 D4 70 00 71 00 00 10 2D 2E 5C 00 78 BF 40 5D 00 78 BF 00 5E 00 23 FE 01 5F 00 23 FE 00 60 00 1D EF 10 61 00 1D EF 00 65 00 21 F7 00 66 00 21 F7 08 67 00 25 DF 20 68 00 25 DF 00 1D 00 21 FE 00 1C 00 21 FE 01 0F 00 26 F8 00 11 00 26 F8 01 05 00 26 F8 02 12 00 26 F8 03 06 00 26 F8 04 31 00 26 8F 00 32 00 26 8F 10 33 00 26 8F 20 34 00 26 8F 30 35 00 26 8F 40 07 00 25 F8 00 0B 00 25 F8 01 0C 00 25 F8 02 0D 00 25 F8 04 28 00 23 F3 00 29 00 23 F3 04 2A 00 23 F3 08 2B 00 58 00 00 2C 00 59 00 00 88 00 23 FD 02 89 00 23 FD 00 08 00 1D DF 00 03 00 1D DF 00 FF FF 00 00 00 Handle 0xD401 DMI type 212, 37 bytes. OEM-specific Type Header and Data: D4 25 01 D4 70 00 71 00 03 40 49 4A 42 00 48 7F 80 43 00 48 7F 00 55 00 47 BF 00 6D 00 47 BF 40 FF FF 00 00 00 Handle 0xDE00 DMI type 222, 13 bytes. OEM-specific Type Header and Data: DE 0D 00 DE 01 02 FF FF 00 00 00 00 00 Handle 0x7F00 DMI type 127, 4 bytes. End Of Table --Boundary-00=_tKuoCrLaLn4cyIl Content-Type: text/plain; charset="us-ascii"; name="biosdecode.txt" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename="biosdecode.txt" # biosdecode 2.6 SYSID present. Revision: 0 Structure Table Address: 0x000F7661 Number Of Structures: 1 SMBIOS 2.3 present. Structure Table Length: 2338 bytes Structure Table Address: 0x000F76A0 Number Of Structures: 61 Maximum Structure Size: 205 bytes PCI Interrupt Routing 1.0 present. Router ID: 00:1f.0 Exclusive IRQs: None Compatible Router: 8086:1234 Slot Entry 1: ID 00:1d, on-board Slot Entry 2: ID 00:1e, on-board Slot Entry 3: ID 00:1f, on-board Slot Entry 4: ID 01:00, on-board Slot Entry 5: ID 02:00, on-board Slot Entry 6: ID 02:01, on-board Slot Entry 7: ID 02:03, on-board Slot Entry 8: ID 02:08, on-board Slot Entry 9: ID 02:0c, on-board Slot Entry 10: ID 08:00, on-board Slot Entry 11: ID 08:01, on-board ACPI 1.0 present. OEM Identifier: DELL RSD Table 32-bit Address: 0x000FDE64 PNP BIOS 1.0 present. Event Notification: Polling Event Notification Flag Address: 0x000004B4 Real Mode 16-bit Code Address: F000:E2F1 Real Mode 16-bit Data Address: 0040:0000 16-bit Protected Mode Code Address: 0x000FE2F4 16-bit Protected Mode Data Address: 0x00000040 BIOS32 Service Directory present. Revision: 0 Calling Interface Address: 0x000FFE90 --Boundary-00=_tKuoCrLaLn4cyIl Content-Type: text/plain; charset="us-ascii"; name="pciconf-lv.txt" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename="pciconf-lv.txt" agp0@pci0:0:0: class=0x060000 card=0x00000000 chip=0x1a308086 rev=0x04 hdr=0x00 vendor = 'Intel Corporation' device = '82845/E/MP/MZ Brookdale CPU to I/O Bridge' class = bridge subclass = HOST-PCI pcib1@pci0:1:0: class=0x060400 card=0x00000000 chip=0x1a318086 rev=0x04 hdr=0x01 vendor = 'Intel Corporation' device = '82845/E/MP/MZ Brookdale CPU to AGP Bridge' class = bridge subclass = PCI-PCI uhci0@pci0:29:0: class=0x0c0300 card=0x45418086 chip=0x24828086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82801CA/CAM (ICH3-S/ICH3-M) USB Controller #1' class = serial bus subclass = USB uhci1@pci0:29:1: class=0x0c0300 card=0x45418086 chip=0x24848086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82801CA/CAM (ICH3-S/ICH3-M) USB Controller #2' class = serial bus subclass = USB uhci2@pci0:29:2: class=0x0c0300 card=0x45418086 chip=0x24878086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82801CA/CAM (ICH3-S/ICH3-M) USB Controller #3' class = serial bus subclass = USB pcib2@pci0:30:0: class=0x060400 card=0x00000000 chip=0x24488086 rev=0x42 hdr=0x01 vendor = 'Intel Corporation' device = '82801BAM/CAM/DBM (ICH2-M/3-M/4-M) Hub Interface to PCI Bridge' class = bridge subclass = PCI-PCI isab0@pci0:31:0: class=0x060100 card=0x00000000 chip=0x248c8086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82801CAM LPC Interface or ISA bridge: see Notes' class = bridge subclass = PCI-ISA atapci0@pci0:31:1: class=0x01018a card=0x45418086 chip=0x248a8086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82801CAM (ICH3-M) UltraATA/100 EIDE Controller' class = mass storage subclass = ATA pcm0@pci0:31:5: class=0x040100 card=0x59591013 chip=0x24858086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82801CA/CAM (ICH3-S/ICH3-M) AC'97 Audio Controller' class = multimedia subclass = audio none0@pci0:31:6: class=0x070300 card=0x4c21134d chip=0x24868086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82801CA/CAM (ICH3-S/ICH3-M) AC'97 Modem Controller' class = simple comms subclass = generic modem drm0@pci1:0:0: class=0x030000 card=0x012a1028 chip=0x4c571002 rev=0x00 hdr=0x00 vendor = 'ATI Technologies Inc' device = 'fdds Radeon Mobility M7 LW' class = display subclass = VGA xl0@pci2:0:0: class=0x020000 card=0x012a1028 chip=0x920010b7 rev=0x78 hdr=0x00 vendor = '3COM Corp, Networking Division' device = '3C905C-TX Fast EtherLink for PC Management NIC' class = network subclass = ethernet cbb0@pci2:1:0: class=0x060700 card=0x012a1028 chip=0xac51104c rev=0x00 hdr=0x02 vendor = 'Texas Instruments (TI)' device = 'PCI1420 PC card CardBus Controller' class = bridge subclass = PCI-CardBus cbb1@pci2:1:1: class=0x060700 card=0x012a1028 chip=0xac51104c rev=0x00 hdr=0x02 vendor = 'Texas Instruments (TI)' device = 'PCI1420 PC card CardBus Controller' class = bridge subclass = PCI-CardBus cbb2@pci2:3:0: class=0x060700 card=0xab0112a3 chip=0xac50104c rev=0x01 hdr=0x02 vendor = 'Texas Instruments (TI)' device = 'PCI1410 PC card cardBus Controller' class = bridge subclass = PCI-CardBus xl1@pci2:8:0: class=0x020000 card=0x00a71028 chip=0x920010b7 rev=0x78 hdr=0x00 vendor = '3COM Corp, Networking Division' device = '3C905C-TX Fast EtherLink for PC Management NIC' class = network subclass = ethernet --Boundary-00=_tKuoCrLaLn4cyIl Content-Type: text/plain; charset="us-ascii"; name="usbdevs.txt" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename="usbdevs.txt" Controller /dev/usb0: addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x0000), rev 1.00 port 1 powered port 2 powered Controller /dev/usb1: addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x0000), rev 1.00 port 1 powered port 2 addr 2: full speed, power 100 mA, config 1, General Purpose USB Hub(0x2036), vendor 0x0451(0x0451), rev 1.01 port 1 addr 3: low speed, power 98 mA, config 1, USB Receiver(0xc704), Logitech(0x046d), rev 24.04 port 2 powered Controller /dev/usb2: addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x0000), rev 1.00 port 1 powered port 2 addr 2: full speed, self powered, config 1, product 0x0237(0x0237), vendor 0x050d(0x050d), rev 1.00 port 1 powered port 2 powered port 3 powered port 4 powered port 5 addr 3: low speed, power 100 mA, config 1, LEGO USB Tower(0x0001), LEGO Group(0x0694), rev 1.00 port 6 addr 4: full speed, power 90 mA, config 1, LEXR PLUG DRIVE(0x0080), LEXR PLUG DRIVE(0x05dc), rev 0.01 port 7 addr 5: full speed, power 100 mA, config 1, Mass Storage Device(0x9385), Generic(0x058f), rev 1.00 --Boundary-00=_tKuoCrLaLn4cyIl Content-Type: text/plain; charset="us-ascii"; name="plugins.txt" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename="plugins.txt" Setup your /etc/libmap.conf. - - - - - - - - - - - - - - - - - - - - - - - - - - - - # /etc/libmap.conf for FreeBSD 5.x # $Id: libmap.conf-FreeBSD5.x,v 1.9 2004/08/23 16:26:44 nork Exp $ # Flash6 with Opera is not avilable. # Flash6 with Konqueror # KDE on FreeBSD requires plugins to be placed in /opt/mozilla/plugins/. # (unlike many other www browsers on X11, it does not support # /usr/X11R6/lib/browser_plugins/ for a plugin directory) # So please copy libflashplayer.so and flashplayer.xpt to # /opt/mozilla/plugins like following lines. # mkdir -p /opt/mozilla/plugins # cd /usr/local/lib/linux-flashplugin6 # cp flashplayer.xpt libflashplayer.so /opt/mozilla/plugins/ [/opt/mozilla/plugins/libflashplayer.so] libpthread.so.0 pluginwrapper/flash6.so libdl.so.2 pluginwrapper/flash6.so libz.so.1 libz.so.2 libstdc++-libc6.2-2.so.3 libstdc++.so.4 libm.so.6 libm.so.2 libc.so.6 pluginwrapper/flash6.so # Flash6 with Mozilla/Firebird/Galeon/Epiphany [/usr/local/lib/linux-flashplugin6/libflashplayer.so] libpthread.so.0 pluginwrapper/flash6.so libdl.so.2 pluginwrapper/flash6.so libz.so.1 libz.so.2 libstdc++-libc6.2-2.so.3 libstdc++.so.4 libm.so.6 libm.so.2 libc.so.6 pluginwrapper/flash6.so # Acrobat with Opera [/usr/X11R6/lib/browser_plugins/nppdf.so] libc.so.6 pluginwrapper/acrobat.so # Acrobat with Konqueror # KDE on FreeBSD requires plugins to be placed in /opt/mozilla/plugins/. # (unlike many other www browsers on X11, it does not support # /usr/X11R6/lib/browser_plugins/ for a plugin directory) # So please copy nppdf.so to /opt/mozilla/plugins/ like following lines. # mkdir -p /opt/mozilla/plugins # cd /usr/local/Acrobat5/Browsers/intellinux # cp nppdf.so /opt/mozilla/plugins/ [/opt/mozilla/plugins/nppdf.so] libc.so.6 pluginwrapper/acrobat.so # Acrobat with Mozilla/Firebird/Galeon/Epiphany [/usr/local/Acrobat5/Browsers/intellinux/nppdf.so] libc.so.6 pluginwrapper/acrobat.so # Java3D # NOTE: THESE ARE SAMPLES. PLEASE SEE ALSO INSTALL MESSAGES # OF java/java3d PORT. [/usr/local/jdk1.4.2/jre/lib/i386/libJ3D.so] libdl.so.2 pluginwrapper/java3d.so libm.so.6 libm.so.2 libnsl.so.1 pluginwrapper/java3d.so libpthread.so.0 pluginwrapper/java3d.so libc.so.6 pluginwrapper/java3d.so [/usr/local/jdk1.4.2/jre/lib/i386/libj3daudio.so] libm.so.6 libm.so.2 libnsl.so.1 pluginwrapper/java3d_snd.so libpthread.so.0 pluginwrapper/java3d_snd.so libc.so.6 pluginwrapper/java3d_snd.so [/usr/local/jdk1.4.2/jre/lib/i386/libJ3DUtils.so] libpthread.so.0 pluginwrapper/java3d.so libc.so.6 pluginwrapper/java3d.so # Java Advanced Imaging (JAI) API # NOTE: THIS IS A SAMPLE. PLEASE SEE ALSO INSTALL MESSAGES # OF java/jai PORT. [/usr/local/jdk1.4.2/jre/lib/i386/libmlib_jai/libmlib_jai.so] libm.so.6 libm.so.2 libc.so.6 pluginwrapper/jai.so # JAI Image I/O Tools # NOTE: THIS IS A SAMPLE. PLEASE SEE ALSO INSTALL MESSAGES # OF java/jai-imageio PORT. [/usr/local/jdk1.4.2/jre/lib/i386/libclib_jiio.so] libm.so.6 libm.so.2 libc.so.6 pluginwrapper/jai.so # Photo Image Print System (for EPSON bubble jet printers driver) #[/usr/local/lib/pips/] #libc.so.6 pluginwrapper/pips.so #libdl.so.2 pluginwrapper/pips.so - - - - - - - - - - - - - - - - - - - - - - - - - - - - Now start browser and go to 'about:plugins' and the new plugins are enabled! ===> Registering installation for linuxpluginwrapper-20040831 ===> Cleaning for linuxpluginwrapper-20040831 --Boundary-00=_tKuoCrLaLn4cyIl--