Date: Mon, 6 Jan 1997 04:19:37 -0800 (PST) From: Brian Beattie <beattie@aracnet.com> To: Nate Williams <nate@mt.sri.com> Cc: mobile@freebsd.org Subject: Re: Tecra 730 Message-ID: <Pine.NEB.3.95.970106041520.1720A-100000@eris.beattie.aracnet.com> In-Reply-To: <199701051620.JAA17006@rocky.mt.sri.com>
next in thread | previous in thread | raw e-mail | index | archive | help
-----BEGIN PGP SIGNED MESSAGE----- On Sun, 5 Jan 1997, Nate Williams wrote: > > > Thanks. Are you using the ep0 driver or the zp0 driver? If the former, > > > then you have to stop/restart pccard everytime you modify > > > /etc/pccard.conf to mess with the link flags. > > > > I've never had any luck changing the luck with changing the link > > flags on an ethernet card once they were set. Maybe I just did not > > understand what I was seeing. So I have been rebooting. > > So are you using the ep0 driver or the zp0 driver? > > > When you say stop/restart pccard, do you mean remove/reinsert the > > pccard or is there something else I need to do. > > Which driver are you running? > I using the ep0 driver with the PAO-961215 patches. I now have it working and can use either the UTP or the BNC connector at will. for the BNC I added -link0 link1 -link2, for the UTP I added link0 - -link1 -link2. I did not test all permutations so this may is probably over kill, but it works. Brian Beattie | From an MIT job ad "Applicants must also have http://www.aracnet.com/~beattie | extensive knowledge of UNIX, although they beattie@aracnet.com | should have sufficently good programming taste Fax (503)331-8186 | to not consider this an achievement." -----BEGIN PGP SIGNATURE----- Version: 2.6.2 iQCVAwUBMtDtz1QwtztGaITFAQFYBgP+PpTncKFv3o4sFtDt8g3euYDZ8G/TSh0Y eDidcS6ZhlMWJLsbUlZ6bTAJsxHxGrPzTAGQOn+/clixVyrRYl8diHKdxZAi7Zf/ ZgLK6qDoMhlLtO/WMtItrRbul94Zgy0dXfH7teJ8D4lDCkMvU7j6engikN/qxIa5 /TCBlZecH10= =WlVq -----END PGP SIGNATURE-----
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.NEB.3.95.970106041520.1720A-100000>