From owner-freebsd-questions Fri Apr 11 11:06:31 1997 Return-Path: Received: (from root@localhost) by freefall.freebsd.org (8.8.5/8.8.5) id LAA07728 for questions-outgoing; Fri, 11 Apr 1997 11:06:31 -0700 (PDT) Received: from gdi.uoregon.edu (gdi.uoregon.edu [128.223.170.30]) by freefall.freebsd.org (8.8.5/8.8.5) with ESMTP id LAA07722 for ; Fri, 11 Apr 1997 11:06:27 -0700 (PDT) Received: from localhost (dwhite@localhost) by gdi.uoregon.edu (8.8.5/8.6.12) with SMTP id LAA01166; Fri, 11 Apr 1997 11:06:20 -0700 (PDT) Date: Fri, 11 Apr 1997 11:06:19 -0700 (PDT) From: Doug White X-Sender: dwhite@localhost Reply-To: Doug White To: webmaster cc: freebsd-questions@FreeBSD.ORG Subject: Re: IDE ---> SCSI In-Reply-To: <199704100500.BAA18466@mailhost.netrunner.net> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk On Thu, 10 Apr 1997, webmaster wrote: > I have 2 hard drives in a P133 with 96mb of RAM. > > HD1 is a 2+ gig IDE set as my primary boot drive. > This drive includes DOS, WIN95 and NT4.0 > > HD2 is a 1+ gig SCSI drive using an ADAPTEC 15X controller. What model is it, exactly? There is a 1520 and a 1540 (replace the 0 with a 2 for models w/ a floppy controller). > 1) Created a bootable floppy [/tools/fdimage /floppies/boot.flp A:] > 2) Booted off this floppy & allowed auto-load of Kernel > 3) Kernal Config [commented out un-usable] > 4) Watched it test all devices... > [did'nt seem to find my sd0 (SCSI) hard drive] > 5) Proceeded to the FreeBSD partition creation area. > > The problem is most likely clear; My SCSI drive sd0 or what have you does > not show up. Only my primary IDE drive. Is there something I missed? You need to go into the kernel config and reset the settings for the appropriate driver to match the settings of your controller. Doug White | University of Oregon Internet: dwhite@resnet.uoregon.edu | Residence Networking Assistant http://gladstone.uoregon.edu/~dwhite | Computer Science Major