Date: Mon, 19 Jul 2010 23:37:10 +0200 From: Henri-Pierre Charles <hpcharles@gmail.com> To: Szilveszter Adam <sziszi@bsd.hu> Cc: freebsd-x11@freebsd.org Subject: Re: Help needed : FreeBSD 8.1 / xorg / xf86-video-intel / dell400 Message-ID: <AANLkTilgb5335zHer8-iQjDqHVjd7SkxFbafo91y16u-@mail.gmail.com> In-Reply-To: <20100719184534.GB2050@baranyfelhocske.buza.adamsfamily.xx> References: <AANLkTilJAdhep2T8hpQoa-vgWLDJo918dIO5_0ZaOqj_@mail.gmail.com> <20100713171210.GB1943@baranyfelhocske.buza.adamsfamily.xx> <AANLkTimU0asifZPlpp5nIcPHdw6SvJn0cz-8hUcUZW3f@mail.gmail.com> <20100716133617.726eebe9@ernst.jennejohn.org> <20100717055429.GA2013@baranyfelhocske.buza.adamsfamily.xx> <AANLkTing3GOx24P7p7eMpKAVb_lhKaXDCRlOsLJpKqeN@mail.gmail.com> <20100719184534.GB2050@baranyfelhocske.buza.adamsfamily.xx>
next in thread | previous in thread | raw e-mail | index | archive | help
Hello Adam, thanks for your reply On Mon, Jul 19, 2010 at 8:45 PM, Szilveszter Adam <sziszi@bsd.hu> wrote: > 1) It seems you are trying to use a multi-monitor config (with Screen1 > commented out.) You say one of these is the LCD of the laptop. What is > the other? Are you testing with the LCD only? (It seems so from the log, > but doesn't hurt to be sure) Yes, my laptop have an LCD panel and a VGA output. In my test I've tried to test only the LCD output. > 2) The video ram found by vesa(4) is very low (mine finds 8000kB): > (II) VESA(0): Total Memory: 13 64KB banks (832kB) > It would be useful to try to investigate why. (Do you have agp activated > in your kernel? I do, although of course vesa provides no acceleration > in that area.) Yes, AGP is activated (I use a GENERIC kernel) : d400:~/>dmesg|grep agp agp0: <Intel 8285xM (85xGM GMCH) SVGA controller> on vgapci0 agp0: detected 892k stolen memory agp0: aperture size is 128M Yes it seem pretty small. Could it be a bug somewhere ? > 3) This is interesting: > (II) VESA(0): Attempting to use 85Hz refresh for mode "640x480" (111) > Is this Hz value correct for the display you are testing with? My LCD > says 60 Hz. Which seem strange because I did'nt write this freq. in my xorg.conf It seem that xorg did'nt care of the "Modes" or VertRefresh, ... I put in my xorg.conf HPC --=20 HPC=A0=A0 http://ticetmensonges.blog.free.fr
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?AANLkTilgb5335zHer8-iQjDqHVjd7SkxFbafo91y16u->