Date: Tue, 3 May 2011 16:49:14 GMT From: Chris Dillon <cdillon@wolves.k12.mo.us> To: freebsd-gnats-submit@FreeBSD.org Subject: kern/156797: Double panic with FreeBSD 9-CURRENT and ZFS Message-ID: <201105031649.p43GnEfl034973@red.freebsd.org> Resent-Message-ID: <201105031650.p43GoA4l097553@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 156797 >Category: kern >Synopsis: Double panic with FreeBSD 9-CURRENT and ZFS >Confidential: no >Severity: critical >Priority: medium >Responsible: freebsd-bugs >State: open >Quarter: >Keywords: >Date-Required: >Class: sw-bug >Submitter-Id: current-users >Arrival-Date: Tue May 03 16:50:10 UTC 2011 >Closed-Date: >Last-Modified: >Originator: Chris Dillon >Release: 9.0-CURRENT >Organization: >Environment: FreeBSD rsnas1.int.wolves.k12.mo.us 9.0-CURRENT FreeBSD 9.0-CURRENT #4: Wed Apr 20 17:27:58 CDT 2011 root@rsnas1.int.wolves.k12.mo.us:/usr/obj/usr/src/sys/RSNAS1 amd64 >Description: The system hung and never rebooted, however, it was still alive enough to print the "Limiting closed port RST response" while I was actually watching it, about 8 hours after the panic. Unfortunately, since this is a fully-ZFS system, I do not have any crashdumps. I will add another HDD and just use it to store crashdumps if I start to get panics more often. Screenshot of the console with panic: http://dl.dropbox.com/u/5055904/20110503-freebsd-zfs-panic.png Text on the console: vputx: negative ref count 0xfffffe01334da1e0: tag zfs, type VDIR usecount 0, writecount 0, refcount 1 mountedhere 0 flags (VI_OWEINACT) VI_LOCKed lock type zfs: EXCL by thread 0xfffffe006928d8c0 (pid 9317) with exclusive waiters pending panic: vputx: negative ref cnt cpuid = 2 Uptime 23h46m51s Cannot dump. Device not defined or unavailable. Automatic reboot in 15 seconds - press a key on the console to abort Sleeping thread (tid 101270, pid9317) owns a non-sleepable lock panic: sleeping thread cpuid = 2 Limiting closed port RST response from 210 to 200 packets/sec >How-To-Repeat: The system is an HP DL380 G5 with dual Xeon X5460 CPUs, 32GB RAM, and two LSI SAS HBAs with some Intel X25-E SSDs and a shelf full of disks attached. Link to dmesg: http://dl.dropbox.com/u/5055904/20110503-freebsd-zfs-dmesg.txt The system is scheduled in crontab to reboot every 24 hours in an attempt to improve system stability (due to some freezes, not panics), so based on the Uptime that was printed in the panic and the crontab entries, the scripts which I use to create/delete daily ZFS snapshots may have been running at the time of the panic. >Fix: Unknown Patch attached with submission follows: Copyright (c) 1992-2011 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 9.0-CURRENT #4: Wed Apr 20 17:27:58 CDT 2011 root@rsnas1.int.wolves.k12.mo.us:/usr/obj/usr/src/sys/RSNAS1 amd64 module_register: module pci/mps already exists! Module pci/mps failed to register: 17 CPU: Intel(R) Xeon(R) CPU X5460 @ 3.16GHz (3166.73-MHz K8-class CPU) Origin = "GenuineIntel" Id = 0x10676 Family = 6 Model = 17 Stepping = 6 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0xce3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,DCA,SSE4.1> AMD Features=0x20100800<SYSCALL,NX,LM> AMD Features2=0x1<LAHF> TSC: P-state invariant, performance statistics real memory = 34359738368 (32768 MB) avail memory = 33105801216 (31572 MB) Event timer "LAPIC" quality 400 ACPI APIC Table: <HP ProLiant> FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs FreeBSD/SMP: 2 package(s) x 4 core(s) cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 cpu2 (AP): APIC ID: 2 cpu3 (AP): APIC ID: 3 cpu4 (AP): APIC ID: 4 cpu5 (AP): APIC ID: 5 cpu6 (AP): APIC ID: 6 cpu7 (AP): APIC ID: 7 ACPI Warning: Invalid length for Pm1aControlBlock: 32, using default 16 (20110413/tbfadt-638) ACPI Warning: Invalid length for Pm2ControlBlock: 32, using default 8 (20110413/tbfadt-638) ioapic0 <Version 2.0> irqs 0-23 on motherboard kbd1 at kbdmux0 acpi0: <HP ProLiant> on motherboard acpi0: Power Button (fixed) Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x908-0x90b on acpi0 cpu0: <ACPI CPU> on acpi0 cpu1: <ACPI CPU> on acpi0 cpu2: <ACPI CPU> on acpi0 cpu3: <ACPI CPU> on acpi0 cpu4: <ACPI CPU> on acpi0 cpu5: <ACPI CPU> on acpi0 cpu6: <ACPI CPU> on acpi0 cpu7: <ACPI CPU> on acpi0 pcib0: <ACPI Host-PCI bridge> on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0 ACPI Warning: For \\_SB_.PCI0.PT02._PRT: Return Package has no elements (empty) (20110413/nspredef-500) pci9: <ACPI PCI bus> on pcib1 pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci9 pci10: <ACPI PCI bus> on pcib2 pcib3: <ACPI PCI-PCI bridge> at device 0.0 on pci10 pci11: <ACPI PCI bus> on pcib3 mps0: <LSI SAS2008> port 0x4000-0x40ff mem 0xfdcf0000-0xfdcf3fff,0xfdc80000-0xfdcbffff irq 16 at device 0.0 on pci11 mps0: Firmware: 08.00.00.00 mps0: IOCCapabilities: 1285c<ScsiTaskFull,DiagTrace,SnapBuf,EEDP,TransRetry,EventReplay,HostDisc> pcib4: <ACPI PCI-PCI bridge> at device 1.0 on pci10 pci14: <ACPI PCI bus> on pcib4 pci14: <serial bus, Fibre Channel> at device 0.0 (no driver attached) pcib5: <ACPI PCI-PCI bridge> at device 2.0 on pci10 pci17: <ACPI PCI bus> on pcib5 pcib6: <PCI-PCI bridge> at device 0.3 on pci9 pci18: <PCI bus> on pcib6 pcib7: <ACPI PCI-PCI bridge> at device 3.0 on pci0 pci6: <ACPI PCI bus> on pcib7 pcib8: <ACPI PCI-PCI bridge> at device 4.0 on pci0 pci19: <ACPI PCI bus> on pcib8 mps1: <LSI SAS2008> port 0x6000-0x60ff mem 0xfdef0000-0xfdef3fff,0xfde80000-0xfdebffff irq 18 at device 0.0 on pci19 mps1: Firmware: 08.00.00.00 mps1: IOCCapabilities: 1285c<ScsiTaskFull,DiagTrace,SnapBuf,EEDP,TransRetry,EventReplay,HostDisc> pcib9: <PCI-PCI bridge> at device 5.0 on pci0 pci22: <PCI bus> on pcib9 pcib10: <ACPI PCI-PCI bridge> at device 6.0 on pci0 pci23: <ACPI PCI bus> on pcib10 pci23: <serial bus, Fibre Channel> at device 0.0 (no driver attached) pcib11: <PCI-PCI bridge> at device 7.0 on pci0 pci26: <PCI bus> on pcib11 pcib12: <ACPI PCI-PCI bridge> at device 28.0 on pci0 pci2: <ACPI PCI bus> on pcib12 pcib13: <PCI-PCI bridge> at device 0.0 on pci2 pci3: <PCI bus> on pcib13 bce0: <HP NC373i Multifunction Gigabit Server Adapter (B2)> mem 0xf8000000-0xf9ffffff irq 16 at device 0.0 on pci3 bce0: /usr/src/sys/dev/bce/if_bce.c(1253): Management firmware enabled but not running! miibus0: <MII bus> on bce0 brgphy0: <BCM5708C 10/100/1000baseTX PHY> PHY 1 on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow bce0: Ethernet address: 00:1e:0b:cb:f4:68 bce0: ASIC (0x57081020); Rev (B2); Bus (PCI-X, 64-bit, 133MHz); B/C (1.9.6); Bufs (RX:2;TX:2;PG:8); Flags (SPLT|MSI|MFW); MFW (NOT RUNNING!) Coal (RX:6,6,18,18; TX:20,20,80,80) pcib14: <ACPI PCI-PCI bridge> at device 28.1 on pci0 pci4: <ACPI PCI bus> on pcib14 pcib15: <PCI-PCI bridge> at device 0.0 on pci4 pci5: <PCI bus> on pcib15 bce1: <HP NC373i Multifunction Gigabit Server Adapter (B2)> mem 0xfa000000-0xfbffffff irq 17 at device 0.0 on pci5 bce1: /usr/src/sys/dev/bce/if_bce.c(1253): Management firmware enabled but not running! miibus1: <MII bus> on bce1 brgphy1: <BCM5708C 10/100/1000baseTX PHY> PHY 1 on miibus1 brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow bce1: Ethernet address: 00:1e:0b:cb:f4:66 bce1: ASIC (0x57081020); Rev (B2); Bus (PCI-X, 64-bit, 133MHz); B/C (1.9.6); Bufs (RX:2;TX:2;PG:8); Flags (SPLT|MSI|MFW); MFW (NOT RUNNING!) Coal (RX:6,6,18,18; TX:20,20,80,80) uhci0: <Intel 631XESB/632XESB/3100 USB controller USB-1> port 0x1000-0x101f irq 16 at device 29.0 on pci0 usbus0: <Intel 631XESB/632XESB/3100 USB controller USB-1> on uhci0 uhci1: <Intel 631XESB/632XESB/3100 USB controller USB-2> port 0x1020-0x103f irq 17 at device 29.1 on pci0 usbus1: <Intel 631XESB/632XESB/3100 USB controller USB-2> on uhci1 uhci2: <Intel 631XESB/632XESB/3100 USB controller USB-3> port 0x1040-0x105f irq 18 at device 29.2 on pci0 usbus2: <Intel 631XESB/632XESB/3100 USB controller USB-3> on uhci2 uhci3: <Intel 631XESB/632XESB/3100 USB controller USB-4> port 0x1060-0x107f irq 19 at device 29.3 on pci0 usbus3: <Intel 631XESB/632XESB/3100 USB controller USB-4> on uhci3 ehci0: <Intel 63XXESB USB 2.0 controller> mem 0xf7df0000-0xf7df03ff irq 16 at device 29.7 on pci0 usbus4: EHCI version 1.0 usbus4: <Intel 63XXESB USB 2.0 controller> on ehci0 pcib16: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci1: <ACPI PCI bus> on pcib16 vgapci0: <VGA-compatible display> port 0x3000-0x30ff mem 0xd8000000-0xdfffffff,0xf7ff0000-0xf7ffffff irq 23 at device 3.0 on pci1 pci1: <base peripheral> at device 4.0 (no driver attached) pci1: <base peripheral> at device 4.2 (no driver attached) uhci4: <UHCI (generic) USB controller> port 0x3800-0x381f irq 22 at device 4.4 on pci1 usbus5: <UHCI (generic) USB controller> on uhci4 pci1: <serial bus> at device 4.6 (no driver attached) isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel 63XXESB2 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x500-0x50f irq 17 at device 31.1 on pci0 ata0: <ATA channel 0> on atapci0 acpi_tz0: <Thermal Zone> on acpi0 attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 900 Event timer "HPET" frequency 14318180 Hz quality 450 Event timer "HPET1" frequency 14318180 Hz quality 440 Event timer "HPET2" frequency 14318180 Hz quality 440 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 orm0: <ISA Option ROMs> at iomem 0xc0000-0xcafff,0xd3000-0xe17ff,0xe6000-0xe7fff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 atrtc0: <AT realtime clock> at port 0x70 irq 8 on isa0 Event timer "RTC" frequency 32768 Hz quality 0 uart1: <Non-standard ns8250 class UART with FIFOs> at port 0x2f8-0x2ff irq 3 on isa0 est0: <Enhanced SpeedStep Frequency Control> on cpu0 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 4921492106004921 device_attach: est0 attach returned 6 p4tcc0: <CPU Frequency Thermal Control> on cpu0 est1: <Enhanced SpeedStep Frequency Control> on cpu1 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 4921492106004921 device_attach: est1 attach returned 6 p4tcc1: <CPU Frequency Thermal Control> on cpu1 est2: <Enhanced SpeedStep Frequency Control> on cpu2 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 4921492106004921 device_attach: est2 attach returned 6 p4tcc2: <CPU Frequency Thermal Control> on cpu2 est3: <Enhanced SpeedStep Frequency Control> on cpu3 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 4921492106004921 device_attach: est3 attach returned 6 p4tcc3: <CPU Frequency Thermal Control> on cpu3 est4: <Enhanced SpeedStep Frequency Control> on cpu4 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 4921492106004921 device_attach: est4 attach returned 6 p4tcc4: <CPU Frequency Thermal Control> on cpu4 est5: <Enhanced SpeedStep Frequency Control> on cpu5 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 4921492106004921 device_attach: est5 attach returned 6 p4tcc5: <CPU Frequency Thermal Control> on cpu5 est6: <Enhanced SpeedStep Frequency Control> on cpu6 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 4921492106004921 device_attach: est6 attach returned 6 p4tcc6: <CPU Frequency Thermal Control> on cpu6 est7: <Enhanced SpeedStep Frequency Control> on cpu7 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 4921492106004921 device_attach: est7 attach returned 6 p4tcc7: <CPU Frequency Thermal Control> on cpu7 ZFS filesystem version 5 ZFS storage pool version 28 Timecounters tick every 1.000 msec usbus0: 12Mbps Full Speed USB v1.0 usbus1: 12Mbps Full Speed USB v1.0 usbus2: 12Mbps Full Speed USB v1.0 usbus3: 12Mbps Full Speed USB v1.0 usbus4: 480Mbps High Speed USB v2.0 usbus5: 12Mbps Full Speed USB v1.0 ugen0.1: <Intel> at usbus0 uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 ugen1.1: <Intel> at usbus1 uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 ugen2.1: <Intel> at usbus2 uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 ugen3.1: <Intel> at usbus3 uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3 ugen4.1: <Intel> at usbus4 uhub4: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4 ugen5.1: <0x103c> at usbus5 uhub5: <0x103c UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5 uhub0: 2 ports with 2 removable, self powered uhub1: 2 ports with 2 removable, self powered uhub2: 2 ports with 2 removable, self powered uhub3: 2 ports with 2 removable, self powered uhub5: 2 ports with 2 removable, self powered acd0: DVDR <TEAC DV-W28E-RW/G.B1> at ata0-master UDMA33 bce0: bce_pulse(): Warning: bootcode thinks driver is absent! (bc_state = 0x00000006) ugen5.2: <HP> at usbus5 ukbd0: <Virtual Keyboard> on usbus5 kbd2 at ukbd0 ums0: <Virtual Mouse> on usbus5 ums0: 3 buttons and [XY] coordinates ID=0 uhub4: 8 ports with 8 removable, self powered da0 at mps0 bus 0 scbus0 target 0 lun 0 da0: <ATA SSDSA2SH032G1GN 8860> Fixed Direct Access SCSI-5 device da0: 300.000MB/s transfers da0: Command Queueing enabled da0: 30517MB (62500000 512 byte sectors: 255H 63S/T 3890C) da1 at mps0 bus 0 scbus0 target 1 lun 0 da1: <ATA SSDSA2SH032G1GN 8860> Fixed Direct Access SCSI-5 device da1: 300.000MB/s transfers da1: Command Queueing enabled da1: 30517MB (62500000 512 byte sectors: 255H 63S/T 3890C) da2 at mps0 bus 0 scbus0 target 2 lun 0 da2: <ATA SSDSA2SH032G1GN 8860> Fixed Direct Access SCSI-5 device da2: 300.000MB/s transfers da2: Command Queueing enabled da2: 30517MB (62500000 512 byte sectors: 255H 63S/T 3890C) da3 at mps0 bus 0 scbus0 target 3 lun 0 da3: <ATA SSDSA2SH032G1GN 8860> Fixed Direct Access SCSI-5 device da3: 300.000MB/s transfers da3: Command Queueing enabled da3: 30517MB (62500000 512 byte sectors: 255H 63S/T 3890C) da7 at mps1 bus 0 scbus1 target 1 lun 0 da7: <ATA GB0750C4414 HPG4> Fixed Direct Access SCSI-5 device da7: 150.000MB/s transfers da7: Command Queueing enabled da7: 715404MB (1465149168 512 byte sectors: 255H 63S/T 91201C) da4 at mps0 bus 0 scbus0 target 5 lun 0 da4: <HP DH072BB978 HPDA> Fixed Direct Access SCSI-5 device da4: 300.000MB/s transfers da4: Command Queueing enabled da4: 70007MB (143374738 512 byte sectors: 255H 63S/T 8924C) da5 at mps0 bus 0 scbus0 target 6 lun 0 da5: <HP DH072BB978 HPDA> Fixed Direct Access SCSI-5 device da5: 300.000MB/s transfers da5: Command Queueing enabled da5: 70007MB (143374738 512 byte sectors: 255H 63S/T 8924C) da6 at mps0 bus 0 scbus0 target 7 lun 0 da6: <HP DH072BB978 HPDA> Fixed Direct Access SCSI-5 device da6: 300.000MB/s transfers da6: Command Queueing enabled da6: 70007MB (143374738 512 byte sectors: 255H 63S/T 8924C) da8 at mps1 bus 0 scbus1 target 2 lun 0 da8: <ATA GB0750C4414 HPG4> Fixed Direct Access SCSI-5 device da8: 150.000MB/s transfers da8: Command Queueing enabled da8: 715404MB (1465149168 512 byte sectors: 255H 63S/T 91201C) da9 at mps1 bus 0 scbus1 target 3 lun 0 da9: <ATA GB0750C4414 HPG4> Fixed Direct Access SCSI-5 device da9: 150.000MB/s transfers da9: Command Queueing enabled da9: 715404MB (1465149168 512 byte sectors: 255H 63S/T 91201C) da10 at mps1 bus 0 scbus1 target 4 lun 0 da10: <ATA GB0750C4414 HPG4> Fixed Direct Access SCSI-5 device da10: 150.000MB/s transfers da10: Command Queueing enabled da10: 715404MB (1465149168 512 byte sectors: 255H 63S/T 91201C) da11 at mps1 bus 0 scbus1 target 5 lun 0 da11: <ATA GB0750C4414 HPG4> Fixed Direct Access SCSI-5 device da11: 150.000MB/s transfers da11: Command Queueing enabled da11: 715404MB (1465149168 512 byte sectors: 255H 63S/T 91201C) da12 at mps1 bus 0 scbus1 target 6 lun 0 da12: <ATA GB0750C4414 HPG4> Fixed Direct Access SCSI-5 device da12: 150.000MB/s transfers da12: Command Queueing enabled da12: 715404MB (1465149168 512 byte sectors: 255H 63S/T 91201C) da13 at mps1 bus 0 scbus1 target 7 lun 0 da13: <ATA GB0750C4414 HPG4> Fixed Direct Access SCSI-5 device da13: 150.000MB/s transfers da13: Command Queueing enabled da13: 715404MB (1465149168 512 byte sectors: 255H 63S/T 91201C) da14 at mps1 bus 0 scbus1 target 8 lun 0 da14: <ATA GB0750C4414 HPG4> Fixed Direct Access SCSI-5 device da14: 150.000MB/s transfers da14: Command Queueing enabled da14: 715404MB (1465149168 512 byte sectors: 255H 63S/T 91201C) da15 at mps1 bus 0 scbus1 target 9 lun 0 da15: <ATA GB0750C4414 HPG4> Fixed Direct Access SCSI-5 device da15: 150.000MB/s transfers da15: Command Queueing enabled da15: 715404MB (1465149168 512 byte sectors: 255H 63S/T 91201C) da16 at mps1 bus 0 scbus1 target 10 lun 0 da16: <ATA GB0750C4414 HPG4> Fixed Direct Access SCSI-5 device da16: 150.000MB/s transfers da16: Command Queueing enabled da16: 715404MB (1465149168 512 byte sectors: 255H 63S/T 91201C) da17 at mps1 bus 0 scbus1 target 11 lun 0 da17: <ATA GB0750C4414 HPG4> Fixed Direct Access SCSI-5 device da17: 150.000MB/s transfers da17: Command Queueing enabled da17: 715404MB (1465149168 512 byte sectors: 255H 63S/T 91201C) da18 at mps1 bus 0 scbus1 target 12 lun 0 da18: <ATA GB0750C4414 HPG4> Fixed Direct Access SCSI-5 device da18: 150.000MB/s transfers da18: Command Queueing enabled da18: 715404MB (1465149168 512 byte sectors: 255H 63S/T 91201C) ses0 at mps1 bus 0 scbus1 target 0 lun 0 ses0: <HP MSA60 2.18> Fixed Enclosure Services SCSI-5 device ses0: 300.000MB/s transfers ses0: SCSI-3 SES Device SMP: AP CPU #5 Launched! SMP: AP CPU #1 Launched! SMP: AP CPU #2 Launched! SMP: AP CPU #3 Launched! SMP: AP CPU #4 Launched! SMP: AP CPU #6 Launched! SMP: AP CPU #7 Launched! Trying to mount root from zfs:system/freebsd []... bce0: Gigabit link up! >Release-Note: >Audit-Trail: >Unformatted:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201105031649.p43GnEfl034973>