Date: Thu, 10 Feb 2005 12:04:38 -0500 From: Nick Gustas <nick@txf.com> To: freebsd-current@freebsd.org, freebsd-stable@freebsd.org Subject: Re: UPDATE: ATA mkIII first official patches - please test! Message-ID: <420B9426.90008@txf.com> In-Reply-To: <86brasye55.fsf@dwp.des.no> References: <42028F29.1030801@DeepCore.dk> <420A1792.900@DeepCore.dk> <86brasye55.fsf@dwp.des.no>
next in thread | previous in thread | raw e-mail | index | archive | help
Dag-Erling Smørgrav wrote: >Søren Schmidt <sos@DeepCore.dk> writes: > > >>New version that fixes known problems so far etc now available: >> >> > >ah, just commit it already. it works for me, so it must be good enough ;) > >DES > > heh :) Works for me, but one problem, slaves attached to a Seagate master, don't show up :/ Tried a verbose boot, but it hung. Controller is a 4 port highpoint rocketraid in jbod mode. Drives are cabled and jumpered correctly, also tried CS mode, no difference. This was on 5.3 stable, may try MK3 on 6.0 tonight, vanilla 6.0 is fine. MK3 patched 5.3 dmesg from yesterday FreeBSD 5.3-STABLE #20: Wed Feb 9 17:51:03 EST 2005 root@:/usr/src/sys/i386/compile/OPPRESSION Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: AMD Athlon(tm) Processor (1200.05-MHz 686-class CPU) Origin = "AuthenticAMD" Id = 0x662 Stepping = 2 Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> AMD Features=0xc0480000<MP,AMIE,DSP,3DNow!> real memory = 1073217536 (1023 MB) avail memory = 1044873216 (996 MB) MPTable: <TYAN PAULANER > FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 1 cpu1 (AP): APIC ID: 0 ioapic0: Assuming intbase of 0 ioapic0 <Version 1.1> irqs 0-23 on motherboard npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <MPTable Host-PCI bridge> pcibus 0 on motherboard pci0: <PCI bus> on pcib0 agp0: <AMD 762 host to AGP bridge> port 0x1050-0x1053 mem 0xea100000-0xea100fff,0xec000000-0xefffffff at device 0.0 on pci0 pcib1: <MPTable PCI-PCI bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 pci1: <display, VGA> at device 5.0 (no driver attached) isab0: <PCI-ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <AMD 768 UDMA100 controller> port 0xf000-0xf00f,0x376,0x170-0 x177,0x3f6,0x1f0-0x1f7 at device 7.1 on pci0 ata0: <ATA channel 0> on atapci0 ata1: <ATA channel 1> on atapci0 pci0: <bridge, PCI-unknown> at device 7.3 (no driver attached) em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.35> port 0x1000-0x103f mem 0xe8000000-0xe801ffff,0xe8020000-0xe803ffff irq 16 at device 8.0 on pci0 em0: Ethernet address: 00:07:e9:00:ae:36 em0: Speed:N/A Duplex:N/A pcib2: <MPTable PCI-PCI bridge> at device 16.0 on pci0 pci2: <PCI bus> on pcib2 atapci1: <HighPoint HPT374 (channel 0+1) UDMA133 controller> port 0x2000-0x20ff,0x2880-0x2883,0x2888-0x288f,0x2884-0x2887,0x2890-0x2897 irq 17 at device 5.0 on pci2 ata2: <ATA channel 0> on atapci1 ata3: <ATA channel 1> on atapci1 atapci2: <HighPoint HPT374 (channel 2+3) UDMA133 controller> port 0x2400-0x24ff,0x2898-0x289b,0x28a0-0x28a7,0x289c-0x289f,0x28a8-0x28af irq 17 at device 5.1 on pci2 ata4: <ATA channel 0> on atapci2 ata5: <ATA channel 1> on atapci2 pci2: <network, ethernet> at device 8.0 (no driver attached) cpu0 on motherboard cpu1 on motherboard pmtimer0 on isa0 orm0: <ISA Option ROMs> at iomem 0xe0000-0xe3fff,0xcc000-0xcffff,0xcb000-0xcbfff,0xca800-0xcafff,0xc0000-0xca7ff on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 ppc0: parallel port not found. sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 8250 or not responding sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 unknown: <PNP0303> can't assign resources (port) unknown: <PNP0c02> can't assign resources (memory) fdc1: cannot allocate I/O port (6 ports) Timecounters tick every 10.000 msec ad0: 76319MB <WDC WD800BB-00DKA0 77.07W77> at ata0-master UDMA100 ad4: 381554MB <Seagate ST3400832A 3.01> at ata2-master UDMA100 ad6: 190782MB <Seagate ST3200822A 3.01> at ata3-master UDMA100 ad8: 176700MB <IC35L180AVV207 1 V26OA63A> at ata4-master UDMA100 ad9: 95396MB <WDC WD1000BB-32CCB0 22.04A22> at ata4-slave UDMA100 ad10: 156334MB <Maxtor 6Y160P0 YAR41BW0> at ata5-master UDMA133 ad11: 381554MB <Seagate ST3400832A 3.01> at ata5-slave UDMA100 SMP: AP CPU #1 Launched! Mounting root from ufs:/dev/ad0s1a As you can see the hitachi and maxtor mastered slaves showed up I don't have a recent non mk3 5.3 dmesg handy, but here is a working plain 6.0 dmesg from the same machine FreeBSD 6.0-CURRENT #1: Thu Feb 10 10:37:33 EST 2005 root@oppression.tychl.net:/usr/src/sys/i386/compile/OP6 MPTable: <TYAN PAULANER > Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: AMD Athlon(tm) Processor (1200.05-MHz 686-class CPU) Origin = "AuthenticAMD" Id = 0x662 Stepping = 2 Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> AMD Features=0xc0480000<MP,AMIE,DSP,3DNow!> real memory = 1073217536 (1023 MB) avail memory = 1041399808 (993 MB) FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 1 cpu1 (AP): APIC ID: 0 ioapic0: Assuming intbase of 0 ioapic0 <Version 1.1> irqs 0-23 on motherboard npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface cpu0 on motherboard cpu1 on motherboard pcib0: <MPTable Host-PCI bridge> pcibus 0 on motherboard pci0: <PCI bus> on pcib0 agp0: <AMD 762 host to AGP bridge> port 0x1050-0x1053 mem 0xea100000-0xea100fff,0xec000000-0xefffffff at device 0.0 on pci0 pcib1: <MPTable PCI-PCI bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 pci1: <display, VGA> at device 5.0 (no driver attached) isab0: <PCI-ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <AMD 768 UDMA100 controller> port 0xf000-0xf00f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 7.1 on pci0 ata0: channel #0 on atapci0 ata1: channel #1 on atapci0 pci0: <bridge, PCI-unknown> at device 7.3 (no driver attached) em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.35> port 0x1000-0x103f mem 0xe8000000-0xe801ffff,0xe8020000-0xe803ffff irq 16 at device 8.0 on pci0 em0: Ethernet address: 00:07:e9:00:ae:36 em0: Speed:N/A Duplex:N/A pcib2: <MPTable PCI-PCI bridge> at device 16.0 on pci0 pci2: <PCI bus> on pcib2 atapci1: <HighPoint HPT374 (channel 0+1) UDMA133 controller> port 0x2000-0x20ff,0x2880-0x2883,0x2888-0x288f,0x2884-0x2887,0x2890-0x2897 irq 17 at device 5.0 on pci2 ata2: channel #0 on atapci1 ata3: channel #1 on atapci1 atapci2: <HighPoint HPT374 (channel 2+3) UDMA133 controller> port 0x2400-0x24ff,0x2898-0x289b,0x28a0-0x28a7,0x289c-0x289f,0x28a8-0x28af irq 17 at device 5.1 on pci2 ata4: channel #0 on atapci2 ata5: channel #1 on atapci2 xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0x2800-0x287f mem 0xea001000-0xea00107f irq 19 at device 8.0 on pci2 miibus0: <MII bus> on xl0 ukphy0: <Generic IEEE 802.3u media interface> on miibus0 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto xl0: Ethernet address: 00:e0:81:25:91:0f pmtimer0 on isa0 orm0: <ISA Option ROMs> at iomem 0xe0000-0xe3fff,0xcc000-0xcffff,0xcb000-0xcbfff,0xca800-0xcafff,0xc0000-0xca7ff on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] ppc0: parallel port not found. sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 8250 or not responding sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 unknown: <PNP0303> can't assign resources (port) unknown: <PNP0c02> can't assign resources (memory) Timecounters tick every 1.000 msec ad0: 76319MB <WDC WD800BB-00DKA0/77.07W77> [155061/16/63] at ata0-master UDMA100 ad4: 381554MB <ST3400832A/3.01> [775221/16/63] at ata2-master UDMA100 ad5: 381554MB <ST3400832A/3.01> [775221/16/63] at ata2-slave UDMA100 ad6: 190782MB <ST3200822A/3.01> [387621/16/63] at ata3-master UDMA100 ad7: 190782MB <ST3200822A/3.01> [387621/16/63] at ata3-slave UDMA100 ad8: 176700MB <IC35L180AVV207-1/V26OA63A> [359010/16/63] at ata4-master UDMA100 ad9: 95396MB <WDC WD1000BB-32CCB0/22.04A22> [193821/16/63] at ata4-slave UDMA100 ad10: 156334MB <Maxtor 6Y160P0/YAR41BW0> [317632/16/63] at ata5-master UDMA133 ad11: 381554MB <ST3400832A/3.01> [775221/16/63] at ata5-slave UDMA100 SMP: AP CPU #1 Launched! Trying to mount root from ufs:/dev/ad0s1a I know it's not the best bug report, but thanks for any insight!
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?420B9426.90008>