From owner-freebsd-stable@FreeBSD.ORG Mon Mar 6 04:45:13 2006 Return-Path: X-Original-To: freebsd-stable@freebsd.org Delivered-To: freebsd-stable@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 147BF16A420; Mon, 6 Mar 2006 04:45:13 +0000 (GMT) (envelope-from doconnor@gsoft.com.au) Received: from cain.gsoft.com.au (cain.gsoft.com.au [203.31.81.10]) by mx1.FreeBSD.org (Postfix) with ESMTP id 5503043D48; Mon, 6 Mar 2006 04:45:06 +0000 (GMT) (envelope-from doconnor@gsoft.com.au) Received: from inchoate.gsoft.com.au (inchoate.gsoft.com.au [203.31.81.21]) (authenticated bits=0) by cain.gsoft.com.au (8.13.5/8.13.4) with ESMTP id k264ilJi028499 (version=TLSv1/SSLv3 cipher=DHE-RSA-AES256-SHA bits=256 verify=NO); Mon, 6 Mar 2006 15:14:56 +1030 (CST) (envelope-from doconnor@gsoft.com.au) From: "Daniel O'Connor" To: freebsd-stable@freebsd.org Date: Mon, 6 Mar 2006 15:09:45 +1030 User-Agent: KMail/1.9.1 MIME-Version: 1.0 Content-Type: multipart/signed; boundary="nextPart1768291.p1rYIi4NCS"; protocol="application/pgp-signature"; micalg=pgp-sha1 Content-Transfer-Encoding: 7bit Message-Id: <200603061509.53498.doconnor@gsoft.com.au> X-Spam-Score: -1.36 () ALL_TRUSTED X-Scanned-By: MIMEDefang 2.56 on 203.31.81.10 Cc: re@freebsd.org Subject: 6.1BETA3 amd64 doesn't detect my floppy drive X-BeenThere: freebsd-stable@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: Production branch of FreeBSD source code List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 06 Mar 2006 04:45:13 -0000 --nextPart1768291.p1rYIi4NCS Content-Type: multipart/mixed; boundary="Boundary-01=_S07CELEHZRYIZOZ" Content-Transfer-Encoding: 7bit Content-Disposition: inline --Boundary-01=_S07CELEHZRYIZOZ Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: quoted-printable Content-Disposition: inline Hi, I have an amd64 system with an ASUS A8V Deluxe/WIFI-G motherboard (and a panasonic FDD). I get the following output when trying to boot 6.1-BETA3= =2E. =2E.. fdc0: port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on= acpi0 fdc0: [FAST] device_attach: fdc0 attach returned 12 =2E.. Also I get that set of messages twice(!) Once before probing sioX and=20 once after. I've attached the full dmesg. I couldn't see anything in the BIOS related t= o=20 the floppy drive (only serial & parallel both of which are enabled). The system in question normally runs 6.0-RC1 - I've attached a dmesg from t= hat. I see the only place ENOMEM in the FDC code is if malloc fails but I don't= =20 see the printf that goes with that so it must be something else. =2D-=20 Daniel O'Connor software and network engineer for Genesis Software - http://www.gsoft.com.au "The nice thing about standards is that there are so many of them to choose from." -- Andrew Tanenbaum GPG Fingerprint - 5596 B766 97C0 0E94 4347 295E E593 DC20 7B3F CE8C --Boundary-01=_S07CELEHZRYIZOZ Content-Type: text/plain; charset="us-ascii"; name="6.1-BETA3-dmesg.txt" Content-Transfer-Encoding: quoted-printable Content-Disposition: attachment; filename="6.1-BETA3-dmesg.txt" Copyright (c) 1992-2005 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. =46reeBSD 6.0-RC1 #0: Wed Oct 26 13:29:47 UTC 2005 root@chungli-pr.gsoft.com.au:/usr/obj/local0/src/sys/GENESIS ACPI APIC Table: Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: AMD Athlon(tm) 64 Processor 3200+ (2002.57-MHz K8-class CPU) Origin =3D "AuthenticAMD" Id =3D 0x20ff2 Stepping =3D 2 Features=3D0x78bfbff Features2=3D0x1 AMD Features=3D0xe2500800,LM,3DNow+,3DNow> real memory =3D 536543232 (511 MB) avail memory =3D 508919808 (485 MB) MADT: Forcing active-low polarity and level trigger for SCI ioapic0 irqs 0-23 on motherboard acpi0: on motherboard acpi0: Power Button (fixed) pci_link0: irq 11 on acpi0 pci_link1: irq 10 on acpi0 pci_link2: irq 5 on acpi0 pci_link3: irq 7 on acpi0 pci_link4: irq 0 on acpi0 pci_link5: irq 0 on acpi0 pci_link6: irq 0 on acpi0 pci_link7: irq 0 on acpi0 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 cpu0: on acpi0 pcib0: port 0xcf8-0xcff on acpi0 pci0: on pcib0 agp0: mem 0xe4000000-0xe7ffffff at devic= e 0.0 on pci0 pcib1: at device 1.0 on pci0 pci1: on pcib1 drm0: port 0xe000-0xe0ff mem 0xe8000000-0xefffffff,= 0xfbe00000-0xfbe0ffff irq 16 at device 0.0 on pci1 info: [drm] AGP at 0xe4000000 64MB info: [drm] Initialized radeon 1.16.0 20050311 on minor 0 pci1: at device 0.1 (no driver attached) fwohci0: port 0x7000-0x707f mem 0xfb100000-0xfb1007f= f irq 16 at device 7.0 on pci0 fwohci0: OHCI version 1.0 (ROM=3D1) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 00:11:d8:00:00:4f:85:fa fwohci0: Phy 1394a available S400, 2 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: on fwohci0 sbp0: on firewire0 fwohci0: Initiate bus reset fwohci0: node_id=3D0xc800ffc0, gen=3D1, CYCLEMASTER mode firewire0: 1 nodes, maxhop <=3D 0, cable IRM =3D 0 (me) firewire0: bus manager 0 (me) atapci0: port 0x8000-0x803f,0x7800-0x= 780f,0x7400-0x747f mem 0xfb300000-0xfb300fff,0xfb200000-0xfb21ffff irq 18 a= t device 8.0 on pci0 ata2: on atapci0 ata3: on atapci0 ata4: on atapci0 pci0: at device 9.0 (no driver attached) skc0: port 0x9000-0x90ff mem 0xfb600000-0xfb603f= ff irq 17 at device 10.0 on pci0 skc0: Marvell Yukon Lite Gigabit Ethernet rev. (0x9) sk0: on skc0 sk0: Ethernet address: 00:13:d4:78:24:72 miibus0: on sk0 e1000phy0: on miibus0 e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX,= auto pci0: at device 11.0 (no driver attached) pci0: at device 14.0 (no driver attached) atapci1: port 0xc000-0xc007,0xb800-0xb803,0xb= 400-0xb407,0xb000-0xb003,0xa800-0xa80f,0xa400-0xa4ff irq 20 at device 15.0 = on pci0 ata5: on atapci1 ata6: on atapci1 atapci2: port 0x1f0-0x1f7,0x3f6,0x170-0x177,0= x376,0xfc00-0xfc0f at device 15.1 on pci0 ata0: on atapci2 ata1: on atapci2 uhci0: port 0xc400-0xc41f irq 21 at device 16.0= on pci0 uhci0: [GIANT-LOCKED] usb0: on uhci0 usb0: USB revision 1.0 uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: port 0xc800-0xc81f irq 21 at device 16.1= on pci0 uhci1: [GIANT-LOCKED] usb1: on uhci1 usb1: USB revision 1.0 uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: port 0xd000-0xd01f irq 21 at device 16.2= on pci0 uhci2: [GIANT-LOCKED] usb2: on uhci2 usb2: USB revision 1.0 uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered uhci3: port 0xd400-0xd41f irq 21 at device 16.3= on pci0 uhci3: [GIANT-LOCKED] usb3: on uhci3 usb3: USB revision 1.0 uhub3: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub3: 2 ports with 2 removable, self powered ehci0: mem 0xfbc00000-0xfbc000ff irq 21 at = device 16.4 on pci0 ehci0: [GIANT-LOCKED] usb4: waiting for BIOS to give up control usb4: EHCI version 1.0 usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3 usb4: on ehci0 usb4: USB revision 2.0 uhub4: VIA EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub4: 8 ports with 8 removable, self powered isab0: at device 17.0 on pci0 isa0: on isab0 pcm0: port 0xd800-0xd8ff irq 22 at device 17.5 on pci0 pcm0: [GIANT-LOCKED] pcm0: acpi_button0: on acpi0 acpi_button1: on acpi0 atkbdc0: port 0x60,0x64 irq 1 on acpi0 atkbd0: flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] fdc0: port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on= acpi0 fdc0: [FAST] fd0: <1440-KB 3.5" drive> on fdc0 drive 0 sio0: configured irq 3 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 flags 0x10 on acp= i0 sio0: type 16550A sio1: configured irq 4 not in bitmap of probed irqs 0 sio1: port may not be enabled sio1: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 on acpi0 sio1: type 16550A orm0: at iomem 0xc0000-0xccfff on isa0 ppc0: cannot reserve I/O port range sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=3D0x300> vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 ums0: Darfon USB Optical Mouse, rev 1.10/3.01, addr 2, iclass 3/1 ums0: 3 buttons and Z dir. Timecounter "TSC" frequency 2002572145 Hz quality 800 Timecounters tick every 1.000 msec acd0: DVDR at ata0-master UDMA66 ad0: 238475MB at ata2-master SATA150 ad1: 238475MB at ata3-master SATA150 ad2: 152627MB at ata4-master UDMA100 ad3: 152627MB at ata4-slave UDMA100 ar0: 238418MB status: READY ar0: disk0 READY (master) using ad0 at ata2-master ar0: disk1 READY (mirror) using ad1 at ata3-master ar1: 152587MB status: READY ar1: disk0 READY (master) using ad2 at ata4-master ar1: disk1 READY (mirror) using ad3 at ata4-slave cd0 at ata0 bus 0 target 0 lun 0 cd0: Removable CD-ROM SCSI-0 device=20 cd0: 66.000MB/s transfers cd0: Attempt to query device size failed: NOT READY, Medium not present Trying to mount root from ufs:/dev/ar0s1a gsio0: port 0xa000-0xa07f,0x9800-0x980f mem = 0xfba00000-0xfba0007f,0xfb900000-0xfb901fff irq 19 at device 14.0 on pci0 gsio0: [GIANT-LOCKED] gsio0: LCR at 0xa000, I/O at 0x9800, memory at 0xfb900000, S/N 98006 mdsio0: configured irq 16 not in bitmap of probed irqs 0 mdsio0: irq maps: 0 0 0 0 mdsio0: port 0x8800-0x887f,0x8400-0x= 84ff mem 0xfb400000-0xfb40007f irq 16 at device 9.0 on pci0 mdsio0: type 16550A mdsio0: 2-wire mode, RTS transmit control, ignoring RX during TX. mdsio0: [GIANT-LOCKED] ppc0: cannot reserve I/O port range info: [drm] Loading R200 Microcode GEOM_LABEL: Label for provider ar1s1e is ufs/metatronusr. GEOM_LABEL: Label for provider ar1s1d is ufs/metatronvar. GEOM_LABEL: Label for provider ar1s1a is ufs/metatronslash. WARNING: /mnt/metatron: multilabel flag on fs but no MAC support WARNING: /mnt/metatron/var: multilabel flag on fs but no MAC support WARNING: /mnt/metatron/usr: multilabel flag on fs but no MAC support Waiting (max 60 seconds) for system process `vnlru' to stop...done Waiting (max 60 seconds) for system process `bufdaemon' to stop...done Waiting (max 60 seconds) for system process `syncer' to stop... Syncing disks, vnodes remaining...4 4 3 3 0 1 1 0 0 0 done All buffers synced. Uptime: 3d19h48m31s Copyright (c) 1992-2006 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. =46reeBSD 6.1-BETA3 #0: Thu Mar 2 14:31:20 UTC 2006 root@x64.samsco.home:/usr/obj/usr/src/sys/GENERIC Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: AMD Athlon(tm) 64 Processor 3200+ (2002.58-MHz K8-class CPU) Origin =3D "AuthenticAMD" Id =3D 0x20ff2 Stepping =3D 2 Features=3D0x78bfbff Features2=3D0x1 AMD Features=3D0xe2500800,LM,3DNow+,3DNow> real memory =3D 536543232 (511 MB) avail memory =3D 502259712 (478 MB) ACPI APIC Table: MADT: Forcing active-low polarity and level trigger for SCI ioapic0 irqs 0-23 on motherboard acpi0: on motherboard acpi0: Power Button (fixed) Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 cpu0: on acpi0 pcib0: port 0xcf8-0xcff on acpi0 pci0: on pcib0 agp0: mem 0xe4000000-0xe7ffffff at devic= e 0.0 on pci0 pcib1: at device 1.0 on pci0 pci1: on pcib1 pci1: at device 0.0 (no driver attached) pci1: at device 0.1 (no driver attached) fwohci0: port 0x7000-0x707f mem 0xfb100000-0xfb1007f= f irq 16 at device 7.0 on pci0 fwohci0: OHCI version 1.0 (ROM=3D1) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 00:11:d8:00:00:4f:85:fa fwohci0: Phy 1394a available S400, 2 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: on fwohci0 fwe0: on firewire0 if_fwe0: Fake Ethernet address: 02:11:d8:4f:85:fa fwe0: Ethernet address: 02:11:d8:4f:85:fa fwe0: if_start running deferred for Giant sbp0: on firewire0 fwohci0: Initiate bus reset fwohci0: node_id=3D0xc800ffc0, gen=3D1, CYCLEMASTER mode firewire0: 1 nodes, maxhop <=3D 0, cable IRM =3D 0 (me) firewire0: bus manager 0 (me) atapci0: port 0x8000-0x803f,0x7800-0x= 780f,0x7400-0x747f mem 0xfb300000-0xfb300fff,0xfb200000-0xfb21ffff irq 18 a= t device 8.0 on pci0 ata2: on atapci0 ata3: on atapci0 ata4: on atapci0 pci0: at device 9.0 (no driver attached) skc0: port 0x9000-0x90ff mem 0xfb600000-0xfb603f= ff irq 17 at device 10.0 on pci0 skc0: Marvell Yukon Lite Gigabit Ethernet rev. (0x9) sk0: on skc0 sk0: Ethernet address: 00:13:d4:78:24:72 miibus0: on sk0 e1000phy0: on miibus0 e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX,= auto rl0: port 0x9400-0x94ff mem 0xfb800000-0xfb8000= ff irq 16 at device 11.0 on pci0 miibus1: on rl0 rlphy0: on miibus1 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto rl0: Ethernet address: 00:0b:2b:03:d3:7e pci0: at device 14.0 (no driver attached) atapci1: port 0xc000-0xc007,0xb800-0xb803,0xb= 400-0xb407,0xb000-0xb003,0xa800-0xa80f,0xa400-0xa4ff irq 20 at device 15.0 = on pci0 ata5: on atapci1 ata6: on atapci1 atapci2: port 0x1f0-0x1f7,0x3f6,0x170-0x177,0= x376,0xfc00-0xfc0f at device 15.1 on pci0 ata0: on atapci2 ata1: on atapci2 uhci0: port 0xc400-0xc41f irq 21 at device 16.0= on pci0 uhci0: [GIANT-LOCKED] usb0: on uhci0 usb0: USB revision 1.0 uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: port 0xc800-0xc81f irq 21 at device 16.1= on pci0 uhci1: [GIANT-LOCKED] usb1: on uhci1 usb1: USB revision 1.0 uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: port 0xd000-0xd01f irq 21 at device 16.2= on pci0 uhci2: [GIANT-LOCKED] usb2: on uhci2 usb2: USB revision 1.0 uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered uhci3: port 0xd400-0xd41f irq 21 at device 16.3= on pci0 uhci3: [GIANT-LOCKED] usb3: on uhci3 usb3: USB revision 1.0 uhub3: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub3: 2 ports with 2 removable, self powered ehci0: mem 0xfbc00000-0xfbc000ff irq 21 at = device 16.4 on pci0 ehci0: [GIANT-LOCKED] usb4: waiting for BIOS to give up control usb4: EHCI version 1.0 usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3 usb4: on ehci0 usb4: USB revision 2.0 uhub4: VIA EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub4: 8 ports with 8 removable, self powered isab0: at device 17.0 on pci0 isa0: on isab0 pci0: at device 17.5 (no driver attached) acpi_button0: on acpi0 acpi_button1: on acpi0 atkbdc0: port 0x60,0x64 irq 1 on acpi0 atkbd0: flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] fdc0: port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on= acpi0 fdc0: [FAST] device_attach: fdc0 attach returned 12 sio0: configured irq 3 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 flags 0x10 on acp= i0 sio0: type 16550A sio1: configured irq 4 not in bitmap of probed irqs 0 sio1: port may not be enabled sio1: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 on acpi0 sio1: type 16550A fdc0: port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on= acpi0 fdc0: [FAST] device_attach: fdc0 attach returned 12 orm0: at iomem 0xc0000-0xccfff on isa0 ppc0: cannot reserve I/O port range sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=3D0x300> vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 ums0: Darfon USB Optical Mouse, rev 1.10/3.01, addr 2, iclass 3/1 ums0: 3 buttons and Z dir. Timecounter "TSC" frequency 2002578381 Hz quality 800 Timecounters tick every 1.000 msec module_register_init: MOD_LOAD (amr_linux, 0xffffffff805ee760, 0) error 6 md0: Preloaded image 4194304 bytes at 0xffffffff8098be10 acd0: DVDR at ata0-master UDMA66 ad4: 238475MB at ata2-master SATA150 ad6: 238475MB at ata3-master SATA150 ad8: 152627MB at ata4-master UDMA100 ad9: 152627MB at ata4-slave UDMA100 ar0: 238418MB status: READY ar0: disk0 READY (master) using ad4 at ata2-master ar0: disk1 READY (mirror) using ad6 at ata3-master ar1: 152587MB status: READY ar1: disk0 READY (master) using ad8 at ata4-master ar1: disk1 READY (mirror) using ad9 at ata4-slave Trying to mount root from ufs:/dev/md0 Copyright (c) 1992-2006 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. =46reeBSD 6.1-BETA3 #0: Thu Mar 2 14:31:20 UTC 2006 root@x64.samsco.home:/usr/obj/usr/src/sys/GENERIC Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: AMD Athlon(tm) 64 Processor 3200+ (2002.57-MHz K8-class CPU) Origin =3D "AuthenticAMD" Id =3D 0x20ff2 Stepping =3D 2 Features=3D0x78bfbff Features2=3D0x1 AMD Features=3D0xe2500800,LM,3DNow+,3DNow> real memory =3D 536543232 (511 MB) avail memory =3D 502259712 (478 MB) ACPI APIC Table: MADT: Forcing active-low polarity and level trigger for SCI ioapic0 irqs 0-23 on motherboard acpi0: on motherboard acpi0: Power Button (fixed) Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 cpu0: on acpi0 pcib0: port 0xcf8-0xcff on acpi0 pci0: on pcib0 agp0: mem 0xe4000000-0xe7ffffff at devic= e 0.0 on pci0 pcib1: at device 1.0 on pci0 pci1: on pcib1 pci1: at device 0.0 (no driver attached) pci1: at device 0.1 (no driver attached) fwohci0: port 0x7000-0x707f mem 0xfb100000-0xfb1007f= f irq 16 at device 7.0 on pci0 fwohci0: OHCI version 1.0 (ROM=3D1) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 00:11:d8:00:00:4f:85:fa fwohci0: Phy 1394a available S400, 2 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: on fwohci0 fwe0: on firewire0 if_fwe0: Fake Ethernet address: 02:11:d8:4f:85:fa fwe0: Ethernet address: 02:11:d8:4f:85:fa fwe0: if_start running deferred for Giant sbp0: on firewire0 fwohci0: Initiate bus reset fwohci0: node_id=3D0xc800ffc0, gen=3D1, CYCLEMASTER mode firewire0: 1 nodes, maxhop <=3D 0, cable IRM =3D 0 (me) firewire0: bus manager 0 (me) atapci0: port 0x8000-0x803f,0x7800-0x= 780f,0x7400-0x747f mem 0xfb300000-0xfb300fff,0xfb200000-0xfb21ffff irq 18 a= t device 8.0 on pci0 ata2: on atapci0 ata3: on atapci0 ata4: on atapci0 pci0: at device 9.0 (no driver attached) skc0: port 0x9000-0x90ff mem 0xfb600000-0xfb603f= ff irq 17 at device 10.0 on pci0 skc0: Marvell Yukon Lite Gigabit Ethernet rev. (0x9) sk0: on skc0 sk0: Ethernet address: 00:13:d4:78:24:72 miibus0: on sk0 e1000phy0: on miibus0 e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX,= auto rl0: port 0x9400-0x94ff mem 0xfb800000-0xfb8000= ff irq 16 at device 11.0 on pci0 miibus1: on rl0 rlphy0: on miibus1 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto rl0: Ethernet address: 00:0b:2b:03:d3:7e pci0: at device 14.0 (no driver attached) atapci1: port 0xc000-0xc007,0xb800-0xb803,0xb= 400-0xb407,0xb000-0xb003,0xa800-0xa80f,0xa400-0xa4ff irq 20 at device 15.0 = on pci0 ata5: on atapci1 ata6: on atapci1 atapci2: port 0x1f0-0x1f7,0x3f6,0x170-0x177,0= x376,0xfc00-0xfc0f at device 15.1 on pci0 ata0: on atapci2 ata1: on atapci2 uhci0: port 0xc400-0xc41f irq 21 at device 16.0= on pci0 uhci0: [GIANT-LOCKED] usb0: on uhci0 usb0: USB revision 1.0 uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: port 0xc800-0xc81f irq 21 at device 16.1= on pci0 uhci1: [GIANT-LOCKED] usb1: on uhci1 usb1: USB revision 1.0 uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: port 0xd000-0xd01f irq 21 at device 16.2= on pci0 uhci2: [GIANT-LOCKED] usb2: on uhci2 usb2: USB revision 1.0 uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered uhci3: port 0xd400-0xd41f irq 21 at device 16.3= on pci0 uhci3: [GIANT-LOCKED] usb3: on uhci3 usb3: USB revision 1.0 uhub3: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub3: 2 ports with 2 removable, self powered ehci0: mem 0xfbc00000-0xfbc000ff irq 21 at = device 16.4 on pci0 ehci0: [GIANT-LOCKED] usb4: waiting for BIOS to give up control usb4: EHCI version 1.0 usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3 usb4: on ehci0 usb4: USB revision 2.0 uhub4: VIA EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub4: 8 ports with 8 removable, self powered isab0: at device 17.0 on pci0 isa0: on isab0 pci0: at device 17.5 (no driver attached) acpi_button0: on acpi0 acpi_button1: on acpi0 atkbdc0: port 0x60,0x64 irq 1 on acpi0 atkbd0: flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] fdc0: port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on= acpi0 fdc0: [FAST] device_attach: fdc0 attach returned 12 ppc0: port 0x378-0x37f irq 7 on acpi0 ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode ppbus0: on ppc0 plip0: on ppbus0 lpt0: on ppbus0 lpt0: Interrupt-driven port ppi0: on ppbus0 sio0: configured irq 3 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 flags 0x10 on acp= i0 sio0: type 16550A sio1: configured irq 4 not in bitmap of probed irqs 0 sio1: port may not be enabled sio1: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 on acpi0 sio1: type 16550A fdc0: port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on= acpi0 fdc0: [FAST] device_attach: fdc0 attach returned 12 orm0: at iomem 0xc0000-0xccfff on isa0 sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=3D0x300> vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 ums0: Darfon USB Optical Mouse, rev 1.10/3.01, addr 2, iclass 3/1 ums0: 3 buttons and Z dir. Timecounter "TSC" frequency 2002570157 Hz quality 800 Timecounters tick every 1.000 msec module_register_init: MOD_LOAD (amr_linux, 0xffffffff805ee760, 0) error 6 md0: Preloaded image 4194304 bytes at 0xffffffff8098be10 acd0: DVDR at ata0-master UDMA66 ad4: 238475MB at ata2-master SATA150 ad6: 238475MB at ata3-master SATA150 ad8: 152627MB at ata4-master UDMA100 ad9: 152627MB at ata4-slave UDMA100 ar0: 238418MB status: READY ar0: disk0 READY (master) using ad4 at ata2-master ar0: disk1 READY (mirror) using ad6 at ata3-master ar1: 152587MB status: READY ar1: disk0 READY (master) using ad8 at ata4-master ar1: disk1 READY (mirror) using ad9 at ata4-slave Trying to mount root from ufs:/dev/md0 --Boundary-01=_S07CELEHZRYIZOZ Content-Type: text/plain; charset="us-ascii"; name="6.0-RC1-dmesg.txt" Content-Transfer-Encoding: quoted-printable Content-Disposition: attachment; filename="6.0-RC1-dmesg.txt" Copyright (c) 1992-2005 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. =46reeBSD 6.0-RC1 #0: Wed Oct 26 13:29:47 UTC 2005 root@chungli-pr.gsoft.com.au:/usr/obj/local0/src/sys/GENESIS ACPI APIC Table: Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: AMD Athlon(tm) 64 Processor 3200+ (2002.57-MHz K8-class CPU) Origin =3D "AuthenticAMD" Id =3D 0x20ff2 Stepping =3D 2 Features=3D0x78bfbff Features2=3D0x1 AMD Features=3D0xe2500800,LM,3DNow+,3DNow> real memory =3D 536543232 (511 MB) avail memory =3D 508919808 (485 MB) MADT: Forcing active-low polarity and level trigger for SCI ioapic0 irqs 0-23 on motherboard acpi0: on motherboard acpi0: Power Button (fixed) pci_link0: irq 11 on acpi0 pci_link1: irq 10 on acpi0 pci_link2: irq 5 on acpi0 pci_link3: irq 7 on acpi0 pci_link4: irq 0 on acpi0 pci_link5: irq 0 on acpi0 pci_link6: irq 0 on acpi0 pci_link7: irq 0 on acpi0 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 cpu0: on acpi0 pcib0: port 0xcf8-0xcff on acpi0 pci0: on pcib0 agp0: mem 0xe4000000-0xe7ffffff at devic= e 0.0 on pci0 pcib1: at device 1.0 on pci0 pci1: on pcib1 drm0: port 0xe000-0xe0ff mem 0xe8000000-0xefffffff,= 0xfbe00000-0xfbe0ffff irq 16 at device 0.0 on pci1 info: [drm] AGP at 0xe4000000 64MB info: [drm] Initialized radeon 1.16.0 20050311 on minor 0 pci1: at device 0.1 (no driver attached) fwohci0: port 0x7000-0x707f mem 0xfb100000-0xfb1007f= f irq 16 at device 7.0 on pci0 fwohci0: OHCI version 1.0 (ROM=3D1) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 00:11:d8:00:00:4f:85:fa fwohci0: Phy 1394a available S400, 2 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: on fwohci0 sbp0: on firewire0 fwohci0: Initiate bus reset fwohci0: node_id=3D0xc800ffc0, gen=3D1, CYCLEMASTER mode firewire0: 1 nodes, maxhop <=3D 0, cable IRM =3D 0 (me) firewire0: bus manager 0 (me) atapci0: port 0x8000-0x803f,0x7800-0x= 780f,0x7400-0x747f mem 0xfb300000-0xfb300fff,0xfb200000-0xfb21ffff irq 18 a= t device 8.0 on pci0 ata2: on atapci0 ata3: on atapci0 ata4: on atapci0 pci0: at device 9.0 (no driver attached) skc0: port 0x9000-0x90ff mem 0xfb600000-0xfb603f= ff irq 17 at device 10.0 on pci0 skc0: Marvell Yukon Lite Gigabit Ethernet rev. (0x9) sk0: on skc0 sk0: Ethernet address: 00:13:d4:78:24:72 miibus0: on sk0 e1000phy0: on miibus0 e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX,= auto pci0: at device 11.0 (no driver attached) pci0: at device 14.0 (no driver attached) atapci1: port 0xc000-0xc007,0xb800-0xb803,0xb= 400-0xb407,0xb000-0xb003,0xa800-0xa80f,0xa400-0xa4ff irq 20 at device 15.0 = on pci0 ata5: on atapci1 ata6: on atapci1 atapci2: port 0x1f0-0x1f7,0x3f6,0x170-0x177,0= x376,0xfc00-0xfc0f at device 15.1 on pci0 ata0: on atapci2 ata1: on atapci2 uhci0: port 0xc400-0xc41f irq 21 at device 16.0= on pci0 uhci0: [GIANT-LOCKED] usb0: on uhci0 usb0: USB revision 1.0 uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: port 0xc800-0xc81f irq 21 at device 16.1= on pci0 uhci1: [GIANT-LOCKED] usb1: on uhci1 usb1: USB revision 1.0 uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: port 0xd000-0xd01f irq 21 at device 16.2= on pci0 uhci2: [GIANT-LOCKED] usb2: on uhci2 usb2: USB revision 1.0 uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered uhci3: port 0xd400-0xd41f irq 21 at device 16.3= on pci0 uhci3: [GIANT-LOCKED] usb3: on uhci3 usb3: USB revision 1.0 uhub3: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub3: 2 ports with 2 removable, self powered ehci0: mem 0xfbc00000-0xfbc000ff irq 21 at = device 16.4 on pci0 ehci0: [GIANT-LOCKED] usb4: waiting for BIOS to give up control usb4: EHCI version 1.0 usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3 usb4: on ehci0 usb4: USB revision 2.0 uhub4: VIA EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub4: 8 ports with 8 removable, self powered isab0: at device 17.0 on pci0 isa0: on isab0 pcm0: port 0xd800-0xd8ff irq 22 at device 17.5 on pci0 pcm0: [GIANT-LOCKED] pcm0: acpi_button0: on acpi0 acpi_button1: on acpi0 atkbdc0: port 0x60,0x64 irq 1 on acpi0 atkbd0: flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] fdc0: port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on= acpi0 fdc0: [FAST] fd0: <1440-KB 3.5" drive> on fdc0 drive 0 sio0: configured irq 3 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 flags 0x10 on acp= i0 sio0: type 16550A sio1: configured irq 4 not in bitmap of probed irqs 0 sio1: port may not be enabled sio1: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 on acpi0 sio1: type 16550A orm0: at iomem 0xc0000-0xccfff on isa0 ppc0: cannot reserve I/O port range sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=3D0x300> vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 ums0: Darfon USB Optical Mouse, rev 1.10/3.01, addr 2, iclass 3/1 ums0: 3 buttons and Z dir. Timecounter "TSC" frequency 2002572145 Hz quality 800 Timecounters tick every 1.000 msec acd0: DVDR at ata0-master UDMA66 ad0: 238475MB at ata2-master SATA150 ad1: 238475MB at ata3-master SATA150 ad2: 152627MB at ata4-master UDMA100 ad3: 152627MB at ata4-slave UDMA100 ar0: 238418MB status: READY ar0: disk0 READY (master) using ad0 at ata2-master ar0: disk1 READY (mirror) using ad1 at ata3-master ar1: 152587MB status: READY ar1: disk0 READY (master) using ad2 at ata4-master ar1: disk1 READY (mirror) using ad3 at ata4-slave cd0 at ata0 bus 0 target 0 lun 0 cd0: Removable CD-ROM SCSI-0 device=20 cd0: 66.000MB/s transfers cd0: Attempt to query device size failed: NOT READY, Medium not present Trying to mount root from ufs:/dev/ar0s1a gsio0: port 0xa000-0xa07f,0x9800-0x980f mem = 0xfba00000-0xfba0007f,0xfb900000-0xfb901fff irq 19 at device 14.0 on pci0 gsio0: [GIANT-LOCKED] gsio0: LCR at 0xa000, I/O at 0x9800, memory at 0xfb900000, S/N 98006 mdsio0: configured irq 16 not in bitmap of probed irqs 0 mdsio0: irq maps: 0 0 0 0 mdsio0: port 0x8800-0x887f,0x8400-0x= 84ff mem 0xfb400000-0xfb40007f irq 16 at device 9.0 on pci0 mdsio0: type 16550A mdsio0: 2-wire mode, RTS transmit control, ignoring RX during TX. mdsio0: [GIANT-LOCKED] ppc0: cannot reserve I/O port range info: [drm] Loading R200 Microcode GEOM_LABEL: Label for provider ar1s1e is ufs/metatronusr. GEOM_LABEL: Label for provider ar1s1d is ufs/metatronvar. GEOM_LABEL: Label for provider ar1s1a is ufs/metatronslash. WARNING: /mnt/metatron: multilabel flag on fs but no MAC support WARNING: /mnt/metatron/var: multilabel flag on fs but no MAC support WARNING: /mnt/metatron/usr: multilabel flag on fs but no MAC support Waiting (max 60 seconds) for system process `vnlru' to stop...done Waiting (max 60 seconds) for system process `bufdaemon' to stop...done Waiting (max 60 seconds) for system process `syncer' to stop... Syncing disks, vnodes remaining...4 4 3 3 0 1 1 0 0 0 done All buffers synced. Uptime: 3d19h48m31s Copyright (c) 1992-2006 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. =46reeBSD 6.1-BETA3 #0: Thu Mar 2 14:31:20 UTC 2006 root@x64.samsco.home:/usr/obj/usr/src/sys/GENERIC Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: AMD Athlon(tm) 64 Processor 3200+ (2002.58-MHz K8-class CPU) Origin =3D "AuthenticAMD" Id =3D 0x20ff2 Stepping =3D 2 Features=3D0x78bfbff Features2=3D0x1 AMD Features=3D0xe2500800,LM,3DNow+,3DNow> real memory =3D 536543232 (511 MB) avail memory =3D 502259712 (478 MB) ACPI APIC Table: MADT: Forcing active-low polarity and level trigger for SCI ioapic0 irqs 0-23 on motherboard acpi0: on motherboard acpi0: Power Button (fixed) Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 cpu0: on acpi0 pcib0: port 0xcf8-0xcff on acpi0 pci0: on pcib0 agp0: mem 0xe4000000-0xe7ffffff at devic= e 0.0 on pci0 pcib1: at device 1.0 on pci0 pci1: on pcib1 pci1: at device 0.0 (no driver attached) pci1: at device 0.1 (no driver attached) fwohci0: port 0x7000-0x707f mem 0xfb100000-0xfb1007f= f irq 16 at device 7.0 on pci0 fwohci0: OHCI version 1.0 (ROM=3D1) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 00:11:d8:00:00:4f:85:fa fwohci0: Phy 1394a available S400, 2 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: on fwohci0 fwe0: on firewire0 if_fwe0: Fake Ethernet address: 02:11:d8:4f:85:fa fwe0: Ethernet address: 02:11:d8:4f:85:fa fwe0: if_start running deferred for Giant sbp0: on firewire0 fwohci0: Initiate bus reset fwohci0: node_id=3D0xc800ffc0, gen=3D1, CYCLEMASTER mode firewire0: 1 nodes, maxhop <=3D 0, cable IRM =3D 0 (me) firewire0: bus manager 0 (me) atapci0: port 0x8000-0x803f,0x7800-0x= 780f,0x7400-0x747f mem 0xfb300000-0xfb300fff,0xfb200000-0xfb21ffff irq 18 a= t device 8.0 on pci0 ata2: on atapci0 ata3: on atapci0 ata4: on atapci0 pci0: at device 9.0 (no driver attached) skc0: port 0x9000-0x90ff mem 0xfb600000-0xfb603f= ff irq 17 at device 10.0 on pci0 skc0: Marvell Yukon Lite Gigabit Ethernet rev. (0x9) sk0: on skc0 sk0: Ethernet address: 00:13:d4:78:24:72 miibus0: on sk0 e1000phy0: on miibus0 e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX,= auto rl0: port 0x9400-0x94ff mem 0xfb800000-0xfb8000= ff irq 16 at device 11.0 on pci0 miibus1: on rl0 rlphy0: on miibus1 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto rl0: Ethernet address: 00:0b:2b:03:d3:7e pci0: at device 14.0 (no driver attached) atapci1: port 0xc000-0xc007,0xb800-0xb803,0xb= 400-0xb407,0xb000-0xb003,0xa800-0xa80f,0xa400-0xa4ff irq 20 at device 15.0 = on pci0 ata5: on atapci1 ata6: on atapci1 atapci2: port 0x1f0-0x1f7,0x3f6,0x170-0x177,0= x376,0xfc00-0xfc0f at device 15.1 on pci0 ata0: on atapci2 ata1: on atapci2 uhci0: port 0xc400-0xc41f irq 21 at device 16.0= on pci0 uhci0: [GIANT-LOCKED] usb0: on uhci0 usb0: USB revision 1.0 uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: port 0xc800-0xc81f irq 21 at device 16.1= on pci0 uhci1: [GIANT-LOCKED] usb1: on uhci1 usb1: USB revision 1.0 uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: port 0xd000-0xd01f irq 21 at device 16.2= on pci0 uhci2: [GIANT-LOCKED] usb2: on uhci2 usb2: USB revision 1.0 uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered uhci3: port 0xd400-0xd41f irq 21 at device 16.3= on pci0 uhci3: [GIANT-LOCKED] usb3: on uhci3 usb3: USB revision 1.0 uhub3: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub3: 2 ports with 2 removable, self powered ehci0: mem 0xfbc00000-0xfbc000ff irq 21 at = device 16.4 on pci0 ehci0: [GIANT-LOCKED] usb4: waiting for BIOS to give up control usb4: EHCI version 1.0 usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3 usb4: on ehci0 usb4: USB revision 2.0 uhub4: VIA EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub4: 8 ports with 8 removable, self powered isab0: at device 17.0 on pci0 isa0: on isab0 pci0: at device 17.5 (no driver attached) acpi_button0: on acpi0 acpi_button1: on acpi0 atkbdc0: port 0x60,0x64 irq 1 on acpi0 atkbd0: flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] fdc0: port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on= acpi0 fdc0: [FAST] device_attach: fdc0 attach returned 12 sio0: configured irq 3 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 flags 0x10 on acp= i0 sio0: type 16550A sio1: configured irq 4 not in bitmap of probed irqs 0 sio1: port may not be enabled sio1: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 on acpi0 sio1: type 16550A fdc0: port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on= acpi0 fdc0: [FAST] device_attach: fdc0 attach returned 12 orm0: at iomem 0xc0000-0xccfff on isa0 ppc0: cannot reserve I/O port range sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=3D0x300> vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 ums0: Darfon USB Optical Mouse, rev 1.10/3.01, addr 2, iclass 3/1 ums0: 3 buttons and Z dir. Timecounter "TSC" frequency 2002578381 Hz quality 800 Timecounters tick every 1.000 msec module_register_init: MOD_LOAD (amr_linux, 0xffffffff805ee760, 0) error 6 md0: Preloaded image 4194304 bytes at 0xffffffff8098be10 acd0: DVDR at ata0-master UDMA66 ad4: 238475MB at ata2-master SATA150 ad6: 238475MB at ata3-master SATA150 ad8: 152627MB at ata4-master UDMA100 ad9: 152627MB at ata4-slave UDMA100 ar0: 238418MB status: READY ar0: disk0 READY (master) using ad4 at ata2-master ar0: disk1 READY (mirror) using ad6 at ata3-master ar1: 152587MB status: READY ar1: disk0 READY (master) using ad8 at ata4-master ar1: disk1 READY (mirror) using ad9 at ata4-slave Trying to mount root from ufs:/dev/md0 Copyright (c) 1992-2006 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. =46reeBSD 6.1-BETA3 #0: Thu Mar 2 14:31:20 UTC 2006 root@x64.samsco.home:/usr/obj/usr/src/sys/GENERIC Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: AMD Athlon(tm) 64 Processor 3200+ (2002.57-MHz K8-class CPU) Origin =3D "AuthenticAMD" Id =3D 0x20ff2 Stepping =3D 2 Features=3D0x78bfbff Features2=3D0x1 AMD Features=3D0xe2500800,LM,3DNow+,3DNow> real memory =3D 536543232 (511 MB) avail memory =3D 502259712 (478 MB) ACPI APIC Table: MADT: Forcing active-low polarity and level trigger for SCI ioapic0 irqs 0-23 on motherboard acpi0: on motherboard acpi0: Power Button (fixed) Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 cpu0: on acpi0 pcib0: port 0xcf8-0xcff on acpi0 pci0: on pcib0 agp0: mem 0xe4000000-0xe7ffffff at devic= e 0.0 on pci0 pcib1: at device 1.0 on pci0 pci1: on pcib1 pci1: at device 0.0 (no driver attached) pci1: at device 0.1 (no driver attached) fwohci0: port 0x7000-0x707f mem 0xfb100000-0xfb1007f= f irq 16 at device 7.0 on pci0 fwohci0: OHCI version 1.0 (ROM=3D1) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 00:11:d8:00:00:4f:85:fa fwohci0: Phy 1394a available S400, 2 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: on fwohci0 fwe0: on firewire0 if_fwe0: Fake Ethernet address: 02:11:d8:4f:85:fa fwe0: Ethernet address: 02:11:d8:4f:85:fa fwe0: if_start running deferred for Giant sbp0: on firewire0 fwohci0: Initiate bus reset fwohci0: node_id=3D0xc800ffc0, gen=3D1, CYCLEMASTER mode firewire0: 1 nodes, maxhop <=3D 0, cable IRM =3D 0 (me) firewire0: bus manager 0 (me) atapci0: port 0x8000-0x803f,0x7800-0x= 780f,0x7400-0x747f mem 0xfb300000-0xfb300fff,0xfb200000-0xfb21ffff irq 18 a= t device 8.0 on pci0 ata2: on atapci0 ata3: on atapci0 ata4: on atapci0 pci0: at device 9.0 (no driver attached) skc0: port 0x9000-0x90ff mem 0xfb600000-0xfb603f= ff irq 17 at device 10.0 on pci0 skc0: Marvell Yukon Lite Gigabit Ethernet rev. (0x9) sk0: on skc0 sk0: Ethernet address: 00:13:d4:78:24:72 miibus0: on sk0 e1000phy0: on miibus0 e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX,= auto rl0: port 0x9400-0x94ff mem 0xfb800000-0xfb8000= ff irq 16 at device 11.0 on pci0 miibus1: on rl0 rlphy0: on miibus1 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto rl0: Ethernet address: 00:0b:2b:03:d3:7e pci0: at device 14.0 (no driver attached) atapci1: port 0xc000-0xc007,0xb800-0xb803,0xb= 400-0xb407,0xb000-0xb003,0xa800-0xa80f,0xa400-0xa4ff irq 20 at device 15.0 = on pci0 ata5: on atapci1 ata6: on atapci1 atapci2: port 0x1f0-0x1f7,0x3f6,0x170-0x177,0= x376,0xfc00-0xfc0f at device 15.1 on pci0 ata0: on atapci2 ata1: on atapci2 uhci0: port 0xc400-0xc41f irq 21 at device 16.0= on pci0 uhci0: [GIANT-LOCKED] usb0: on uhci0 usb0: USB revision 1.0 uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: port 0xc800-0xc81f irq 21 at device 16.1= on pci0 uhci1: [GIANT-LOCKED] usb1: on uhci1 usb1: USB revision 1.0 uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: port 0xd000-0xd01f irq 21 at device 16.2= on pci0 uhci2: [GIANT-LOCKED] usb2: on uhci2 usb2: USB revision 1.0 uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered uhci3: port 0xd400-0xd41f irq 21 at device 16.3= on pci0 uhci3: [GIANT-LOCKED] usb3: on uhci3 usb3: USB revision 1.0 uhub3: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub3: 2 ports with 2 removable, self powered ehci0: mem 0xfbc00000-0xfbc000ff irq 21 at = device 16.4 on pci0 ehci0: [GIANT-LOCKED] usb4: waiting for BIOS to give up control usb4: EHCI version 1.0 usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3 usb4: on ehci0 usb4: USB revision 2.0 uhub4: VIA EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub4: 8 ports with 8 removable, self powered isab0: at device 17.0 on pci0 isa0: on isab0 pci0: at device 17.5 (no driver attached) acpi_button0: on acpi0 acpi_button1: on acpi0 atkbdc0: port 0x60,0x64 irq 1 on acpi0 atkbd0: flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] fdc0: port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on= acpi0 fdc0: [FAST] device_attach: fdc0 attach returned 12 ppc0: port 0x378-0x37f irq 7 on acpi0 ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode ppbus0: on ppc0 plip0: on ppbus0 lpt0: on ppbus0 lpt0: Interrupt-driven port ppi0: on ppbus0 sio0: configured irq 3 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 flags 0x10 on acp= i0 sio0: type 16550A sio1: configured irq 4 not in bitmap of probed irqs 0 sio1: port may not be enabled sio1: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 on acpi0 sio1: type 16550A fdc0: port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on= acpi0 fdc0: [FAST] device_attach: fdc0 attach returned 12 orm0: at iomem 0xc0000-0xccfff on isa0 sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=3D0x300> vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 ums0: Darfon USB Optical Mouse, rev 1.10/3.01, addr 2, iclass 3/1 ums0: 3 buttons and Z dir. Timecounter "TSC" frequency 2002570157 Hz quality 800 Timecounters tick every 1.000 msec module_register_init: MOD_LOAD (amr_linux, 0xffffffff805ee760, 0) error 6 md0: Preloaded image 4194304 bytes at 0xffffffff8098be10 acd0: DVDR at ata0-master UDMA66 ad4: 238475MB at ata2-master SATA150 ad6: 238475MB at ata3-master SATA150 ad8: 152627MB at ata4-master UDMA100 ad9: 152627MB at ata4-slave UDMA100 ar0: 238418MB status: READY ar0: disk0 READY (master) using ad4 at ata2-master ar0: disk1 READY (mirror) using ad6 at ata3-master ar1: 152587MB status: READY ar1: disk0 READY (master) using ad8 at ata4-master ar1: disk1 READY (mirror) using ad9 at ata4-slave Trying to mount root from ufs:/dev/md0 Copyright (c) 1992-2005 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. =46reeBSD 6.0-RC1 #0: Wed Oct 26 13:29:47 UTC 2005 root@chungli-pr.gsoft.com.au:/usr/obj/local0/src/sys/GENESIS ACPI APIC Table: Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: AMD Athlon(tm) 64 Processor 3200+ (2002.58-MHz K8-class CPU) Origin =3D "AuthenticAMD" Id =3D 0x20ff2 Stepping =3D 2 Features=3D0x78bfbff Features2=3D0x1 AMD Features=3D0xe2500800,LM,3DNow+,3DNow> real memory =3D 536543232 (511 MB) avail memory =3D 508919808 (485 MB) MADT: Forcing active-low polarity and level trigger for SCI ioapic0 irqs 0-23 on motherboard acpi0: on motherboard acpi0: Power Button (fixed) pci_link0: irq 11 on acpi0 pci_link1: irq 10 on acpi0 pci_link2: irq 5 on acpi0 pci_link3: irq 5 on acpi0 pci_link4: irq 0 on acpi0 pci_link5: irq 0 on acpi0 pci_link6: irq 0 on acpi0 pci_link7: irq 0 on acpi0 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 cpu0: on acpi0 pcib0: port 0xcf8-0xcff on acpi0 pci0: on pcib0 agp0: mem 0xe4000000-0xe7ffffff at devic= e 0.0 on pci0 pcib1: at device 1.0 on pci0 pci1: on pcib1 drm0: port 0xe000-0xe0ff mem 0xe8000000-0xefffffff,= 0xfbe00000-0xfbe0ffff irq 16 at device 0.0 on pci1 info: [drm] AGP at 0xe4000000 64MB info: [drm] Initialized radeon 1.16.0 20050311 on minor 0 pci1: at device 0.1 (no driver attached) fwohci0: port 0x7000-0x707f mem 0xfb100000-0xfb1007f= f irq 16 at device 7.0 on pci0 fwohci0: OHCI version 1.0 (ROM=3D1) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 00:11:d8:00:00:4f:85:fa fwohci0: Phy 1394a available S400, 2 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: on fwohci0 sbp0: on firewire0 fwohci0: Initiate bus reset fwohci0: node_id=3D0xc800ffc0, gen=3D1, CYCLEMASTER mode firewire0: 1 nodes, maxhop <=3D 0, cable IRM =3D 0 (me) firewire0: bus manager 0 (me) atapci0: port 0x8000-0x803f,0x7800-0x= 780f,0x7400-0x747f mem 0xfb300000-0xfb300fff,0xfb200000-0xfb21ffff irq 18 a= t device 8.0 on pci0 ata2: on atapci0 ata3: on atapci0 ata4: on atapci0 pci0: at device 9.0 (no driver attached) skc0: port 0x9000-0x90ff mem 0xfb600000-0xfb603f= ff irq 17 at device 10.0 on pci0 skc0: Marvell Yukon Lite Gigabit Ethernet rev. (0x9) sk0: on skc0 sk0: Ethernet address: 00:13:d4:78:24:72 miibus0: on sk0 e1000phy0: on miibus0 e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX,= auto pci0: at device 11.0 (no driver attached) pci0: at device 14.0 (no driver attached) atapci1: port 0xc000-0xc007,0xb800-0xb803,0xb= 400-0xb407,0xb000-0xb003,0xa800-0xa80f,0xa400-0xa4ff irq 20 at device 15.0 = on pci0 ata5: on atapci1 ata6: on atapci1 atapci2: port 0x1f0-0x1f7,0x3f6,0x170-0x177,0= x376,0xfc00-0xfc0f at device 15.1 on pci0 ata0: on atapci2 ata1: on atapci2 uhci0: port 0xc400-0xc41f irq 21 at device 16.0= on pci0 uhci0: [GIANT-LOCKED] usb0: on uhci0 usb0: USB revision 1.0 uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: port 0xc800-0xc81f irq 21 at device 16.1= on pci0 uhci1: [GIANT-LOCKED] usb1: on uhci1 usb1: USB revision 1.0 uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: port 0xd000-0xd01f irq 21 at device 16.2= on pci0 uhci2: [GIANT-LOCKED] usb2: on uhci2 usb2: USB revision 1.0 uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered uhci3: port 0xd400-0xd41f irq 21 at device 16.3= on pci0 uhci3: [GIANT-LOCKED] usb3: on uhci3 usb3: USB revision 1.0 uhub3: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub3: 2 ports with 2 removable, self powered ehci0: mem 0xfbc00000-0xfbc000ff irq 21 at = device 16.4 on pci0 ehci0: [GIANT-LOCKED] usb4: waiting for BIOS to give up control usb4: EHCI version 1.0 usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3 usb4: on ehci0 usb4: USB revision 2.0 uhub4: VIA EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub4: 8 ports with 8 removable, self powered isab0: at device 17.0 on pci0 isa0: on isab0 pcm0: port 0xd800-0xd8ff irq 22 at device 17.5 on pci0 pcm0: [GIANT-LOCKED] pcm0: acpi_button0: on acpi0 acpi_button1: on acpi0 atkbdc0: port 0x60,0x64 irq 1 on acpi0 atkbd0: flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] fdc0: port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on= acpi0 fdc0: [FAST] fd0: <1440-KB 3.5" drive> on fdc0 drive 0 ppc0: port 0x378-0x37f irq 7 on acpi0 ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode ppbus0: on ppc0 plip0: on ppbus0 lpt0: on ppbus0 lpt0: Interrupt-driven port ppi0: on ppbus0 sio0: configured irq 3 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 flags 0x10 on acp= i0 sio0: type 16550A sio1: configured irq 4 not in bitmap of probed irqs 0 sio1: port may not be enabled sio1: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 on acpi0 sio1: type 16550A orm0: at iomem 0xc0000-0xccfff on isa0 sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=3D0x300> vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 ums0: Darfon USB Optical Mouse, rev 1.10/3.01, addr 2, iclass 3/1 ums0: 3 buttons and Z dir. Timecounter "TSC" frequency 2002578801 Hz quality 800 Timecounters tick every 1.000 msec acd0: DVDR at ata0-master UDMA66 ad0: 238475MB at ata2-master SATA150 ad1: 238475MB at ata3-master SATA150 ad2: 152627MB at ata4-master UDMA100 ad3: 152627MB at ata4-slave UDMA100 ar0: 238418MB status: READY ar0: disk0 READY (master) using ad0 at ata2-master ar0: disk1 READY (mirror) using ad1 at ata3-master ar1: 152587MB status: READY ar1: disk0 READY (master) using ad2 at ata4-master ar1: disk1 READY (mirror) using ad3 at ata4-slave cd0 at ata0 bus 0 target 0 lun 0 cd0: Removable CD-ROM SCSI-0 device=20 cd0: 66.000MB/s transfers cd0: cd present [276839 x 2048 byte records] Trying to mount root from ufs:/dev/ar0s1a gsio0: port 0xa000-0xa07f,0x9800-0x980f mem = 0xfba00000-0xfba0007f,0xfb900000-0xfb901fff irq 19 at device 14.0 on pci0 gsio0: [GIANT-LOCKED] gsio0: LCR at 0xa000, I/O at 0x9800, memory at 0xfb900000, S/N 98006 mdsio0: configured irq 16 not in bitmap of probed irqs 0 mdsio0: irq maps: 0 0 0 0 mdsio0: port 0x8800-0x887f,0x8400-0x= 84ff mem 0xfb400000-0xfb40007f irq 16 at device 9.0 on pci0 mdsio0: type 16550A mdsio0: 2-wire mode, RTS transmit control, ignoring RX during TX. mdsio0: [GIANT-LOCKED] info: [drm] Loading R200 Microcode --Boundary-01=_S07CELEHZRYIZOZ-- --nextPart1768291.p1rYIi4NCS Content-Type: application/pgp-signature -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.2.1 (FreeBSD) iD8DBQBEC70Z5ZPcIHs/zowRAl5eAKCGPeX3APKwJldptXnTERqTGGglAwCgjVmn zweYVJMRD774m2jWKUBq8lY= =D4OE -----END PGP SIGNATURE----- --nextPart1768291.p1rYIi4NCS--