Date: 30 Jun 2002 21:11:25 -0400 From: Joe Marcus Clarke <marcus@marcuscom.com> To: Jeff Bitgood <jeff@bitgood.org> Cc: gnome@FreeBSD.ORG Subject: Re: bonobo-activation port make failure Message-ID: <1025485885.48597.39.camel@shumai.marcuscom.com> In-Reply-To: <200206301902.19471.jeff@bitgood.org> References: <200206301902.19471.jeff@bitgood.org>
next in thread | previous in thread | raw e-mail | index | archive | help
--=-PVnMXTmakZrfnNf6ckm2
Content-Type: text/plain
Content-Transfer-Encoding: quoted-printable
On Sun, 2002-06-30 at 20:02, Jeff Bitgood wrote:
> I'm having a bit of an issue getting bonobo-activation to install. Gnome=
2=20
> actually, but here's where it fails. It's probably something on my end,=20
> since it's been consistent for the last week and through several cvsups. =
=20
> I've attached the information it says to in the error message, hoping I d=
on't=20
> piss you off by the verbosity.
Look at the error. It says you need a newer version of libxml2. Please
update your libxml2 port to the latest, and you'll be set.
Joe
>=20
> I'd really appreciate any insight you can give me. Thanks for your time.
>=20
> Jeff Bitgood
> jeff@bitgood.org
>=20
> --------------------------------------------
>=20
> =3D=3D=3D> Extracting for bonobo-activation-1.0.2
> >> Checksum OK for gnome2/bonobo-activation-1.0.2.tar.bz2.
> =3D=3D=3D> bonobo-activation-1.0.2 depends on file: /usr/local/bin/sed_=
inplace -=20
> found
> =3D=3D=3D> bonobo-activation-1.0.2 depends on executable: gmake - found
> =3D=3D=3D> bonobo-activation-1.0.2 depends on executable: libtool - fou=
nd
> =3D=3D=3D> bonobo-activation-1.0.2 depends on executable: bison - found
> =3D=3D=3D> bonobo-activation-1.0.2 depends on shared library: xml2.5 - =
found
> =3D=3D=3D> bonobo-activation-1.0.2 depends on shared library: ORBit-2.0=
- found
> =3D=3D=3D> Patching for bonobo-activation-1.0.2
> =3D=3D=3D> Applying FreeBSD patches for bonobo-activation-1.0.2
> =3D=3D=3D> Configuring for bonobo-activation-1.0.2
> checking for a BSD compatible install... /usr/bin/install -c -o root -g w=
heel
> checking whether build environment is sane... yes
> checking whether gmake sets ${MAKE}... yes
> checking for working aclocal... found
> checking for working autoconf... found
> checking for working automake... found
> checking for working autoheader... found
> checking for working makeinfo... found
> checking for perl... /usr/bin/perl
> checking whether to enable maintainer-specific portions of Makefiles... n=
o
> checking build system type... i386-unknown-freebsd4.6
> checking host system type... i386-unknown-freebsd4.6
> checking for gcc... cc
> checking for C compiler default output... a.out
> checking whether the C compiler works... yes
> checking whether we are cross compiling... no
> checking for executable suffix...
> checking for object suffix... o
> checking whether we are using the GNU C compiler... yes
> checking whether cc accepts -g... yes
> checking for ld used by GCC... /usr/libexec/elf/ld
> checking if the linker (/usr/libexec/elf/ld) is GNU ld... yes
> checking for /usr/libexec/elf/ld option to reload object files... -r
> checking for BSD-compatible nm... /usr/bin/nm -B
> checking whether ln -s works... yes
> checking how to recognise dependant libraries... pass_all
> checking command to parse /usr/bin/nm -B output... ok
> checking how to run the C preprocessor... cc -E
> checking for dlfcn.h... yes
> checking for ranlib... ranlib
> checking for strip... strip
> checking for objdir... .libs
> checking for cc option to produce PIC... -fPIC
> checking if cc PIC flag -fPIC works... yes
> checking if cc static flag -static works... yes
> checking if cc supports -c -o file.o... yes
> checking if cc supports -c -o file.lo... yes
> checking if cc supports -fno-rtti -fno-exceptions... yes
> checking whether the linker (/usr/libexec/elf/ld) supports shared librari=
es...=20
> yes
> checking how to hardcode library paths into programs... immediate
> checking whether stripping libraries is possible... yes
> checking dynamic linker characteristics... freebsd4.6 ld.so
> checking if libtool supports shared libraries... yes
> checking whether to build shared libraries... yes
> checking whether to build static libraries... no
> checking whether -lc should be explicitly linked in... yes
> creating libtool
> checking host system type... i386-unknown-freebsdelf4.6
> checking for ranlib... ranlib
> checking whether we are using GNU C... yes
> checking for object suffix... o
> checking for executable suffix... no
> checking for cc option to produce PIC... -fPIC
> checking if cc PIC flag -fPIC works... yes
> checking if cc supports -c -o file.o... yes
> checking if cc supports -c -o file.lo... yes
> checking if cc supports -fno-rtti -fno-exceptions ... yes
> checking if cc static flag -static works... -static
> checking whether ln -s works... yes
> checking for ld used by GCC... /usr/libexec/elf/ld
> checking if the linker (/usr/libexec/elf/ld) is GNU ld... yes
> checking whether the linker (/usr/libexec/elf/ld) supports shared librari=
es...=20
> yes
> checking for BSD-compatible nm... /usr/bin/nm -B
> checking command to parse /usr/bin/nm -B output... ok
> checking how to hardcode library paths into programs... immediate
> checking for /usr/libexec/elf/ld option to reload object files... -r
> checking dynamic linker characteristics... freebsdelf4.6 ld.so
> checking if libtool supports shared libraries... yes
> checking whether to build shared libraries... yes
> checking whether to build static libraries... yes
> checking for objdir... .libs
> creating libtool
> checking whether build environment is sane... yes
> checking for gcc... (cached) cc
> checking whether we are using the GNU C compiler... (cached) yes
> checking whether cc accepts -g... (cached) yes
> checking for flex... flex
> checking for flex... (cached) flex
> checking for yywrap in -lfl... yes
> checking lex output file root... lex.yy
> checking whether yytext is a pointer... yes
> checking for a BSD compatible install... /usr/bin/install -c -o root -g w=
heel
> checking whether ln -s works... yes
> checking whether gmake sets ${MAKE}... (cached) yes
> checking for strerror in -lcposix... no
> checking for bison... bison -y
> checking for ranlib... (cached) ranlib
> checking for ANSI C header files... yes
> checking for cc option to accept ANSI C... none needed
> checking for an ANSI C-conforming const... yes
> checking for inline... inline
> checking for sys/types.h... yes
> checking for sys/stat.h... yes
> checking for stdlib.h... yes
> checking for string.h... yes
> checking for memory.h... yes
> checking for strings.h... yes
> checking for inttypes.h... yes
> checking for stdint.h... no
> checking for unistd.h... yes
> checking for off_t... yes
> checking for size_t... yes
> checking for working alloca.h... no
> checking for alloca... yes
> checking for stdlib.h... (cached) yes
> checking for unistd.h... (cached) yes
> checking for getpagesize... yes
> checking for working mmap... yes
> checking for argz.h... no
> checking for limits.h... yes
> checking for locale.h... yes
> checking for nl_types.h... yes
> checking for malloc.h... yes
> checking for string.h... (cached) yes
> checking for unistd.h... (cached) yes
> checking for sys/param.h... yes
> checking for getcwd... yes
> checking for munmap... yes
> checking for putenv... yes
> checking for setenv... yes
> checking for setlocale... yes
> checking for strchr... yes
> checking for strcasecmp... yes
> checking for strdup... yes
> checking for __argz_count... no
> checking for __argz_stringify... no
> checking for __argz_next... no
> checking for LC_MESSAGES... yes
> checking for libintl.h... yes
> checking for dgettext in libc... no
> checking for bindtextdomain in -lintl... yes
> checking for dgettext in -lintl... yes
> checking if -liconv is needed to use gettext...
> checking for dcgettext in -lintl... yes
> checking for msgfmt... /usr/local/bin/msgfmt
> checking for dcgettext... yes
> checking for gmsgfmt... /usr/local/bin/msgfmt
> checking for xgettext... /usr/local/bin/xgettext
> checking for catalogs to be installed... az ar bg ca da de el es fi fr g=
a gl=20
> hu it ja ko lv ms nl nn no pl pt pt_BR ro ru sk sl sv ta tr uk vi zh_CN z=
h_TW
> checking for pkg-config... /usr/local/bin/pkg-config
> checking for gmodule-2.0 >=3D 2.0.1 ORBit-2.0 >=3D 2.4.0... yes
> checking BONOBO_ACTIVATION_CFLAGS... -D_REENTRANT -D_THREAD_SAFE=
=20
> -DORBIT2=3D1 -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/incl=
ude=20
> -I/usr/local/include/orbit-2.0 -I/usr/local/include/linc-1.0
> checking BONOBO_ACTIVATION_LIBS... -pthread -pthread =20
> -L/usr/local/lib -lORBit-2 -lgthread-2.0 -lgobject-2.0 -lgmodule-2.0=20
> -lglib-2.0 -lintl -liconv -lm -llinc
> checking for gmodule-2.0 >=3D 2.0.1 ORBit-2.0 >=3D 2.4.0 =20
> ORBit-CosNaming-2.0 >=3D 2.4.0 libxml-2.0 >=3D 2.4.20... Requested 'li=
bxml-2.0=20
> >=3D 2.4.20' but version of libXML is 2.4.19
>=20
> configure: error: Library requirements ( gmodule-2.0 >=3D 2.0.1 =
=20
> ORBit-2.0 >=3D 2.4.0 ORBit-CosNaming-2.0 >=3D 2.4.0 libxml-2.0 >=
=3D 2.4.20)=20
> not met; consider adjusting the PKG_CONFIG_PATH environment variable if y=
our=20
> libraries are in a nonstandard prefix so pkg-config can find them.
> =3D=3D=3D> Script "configure" failed unexpectedly.
> Please report the problem to gnome@FreeBSD.org [maintainer] and att=
ach
> the
> =20
> "/usr/ports/devel/bonobo-activation/work/bonobo-activation-1.0.2/config.l=
og"
> including the output of the failure of your make command. Also, it =
might
> be a good idea to provide an overview of all packages installed on =
your
> system (e.g. an `ls /var/db/pkg`).
> *** Error code 1
>=20
> ----
>=20
> This file contains any messages produced by compilers while
> running configure, to aid debugging if configure makes a mistake.
>=20
> It was created by configure, which was
> generated by GNU Autoconf 2.52. Invocation command line was
>=20
> $ ./configure --with-html-dir=3D/usr/local/share/doc --disable-gtk-doc =
--prefix=3D/usr/local --target=3Di386-unknown-freebsd4.6
>=20
> ## ---------- ##
> ## Platform. ##
> ## ---------- ##
>=20
> hostname =3D frogger.bitgood.net
> uname -m =3D i386
> uname -r =3D 4.6-STABLE
> uname -s =3D FreeBSD
> uname -v =3D FreeBSD 4.6-STABLE #4: Sun Jun 16 12:47:34 CDT 2002 root=
@gyruss.bitgood.net:/usr/obj/usr/src/sys/FROGGER=20
>=20
> /usr/bin/uname -p =3D i386
> /bin/uname -X =3D unknown
>=20
> /bin/arch =3D unknown
> /usr/bin/arch -k =3D unknown
> /usr/convex/getsysinfo =3D unknown
> hostinfo =3D unknown
> /bin/machine =3D unknown
> /usr/bin/oslevel =3D unknown
> /bin/universe =3D unknown
>=20
> PATH =3D /sbin:/bin:/usr/sbin:/usr/bin:/usr/games:/usr/local/sbin:/usr/lo=
cal/bin:/usr/X11R6/bin:/root/bin
>=20
> ## ------------ ##
> ## Core tests. ##
> ## ------------ ##
>=20
> configure:1132: PATH=3D".;."; conftest.sh
> conftest.sh: not found
> configure:1135: $? =3D 127
> configure:1187: checking for a BSD compatible install
> configure:1236: result: /usr/bin/install -c -o root -g wheel
> configure:1247: checking whether build environment is sane
> configure:1290: result: yes
> configure:1305: checking whether gmake sets ${MAKE}
> configure:1325: result: yes
> configure:1353: checking for working aclocal
> configure:1360: result: found
> configure:1368: checking for working autoconf
> configure:1375: result: found
> configure:1383: checking for working automake
> configure:1390: result: found
> configure:1398: checking for working autoheader
> configure:1405: result: found
> configure:1413: checking for working makeinfo
> configure:1420: result: found
> configure:1469: checking for perl
> configure:1486: found /usr/bin/perl
> configure:1497: result: /usr/bin/perl
> configure:1531: checking whether to enable maintainer-specific portions o=
f Makefiles
> configure:1540: result: no
> configure:1624: checking build system type
> configure:1642: result: i386-unknown-freebsd4.6
> configure:1649: checking host system type
> configure:1663: result: i386-unknown-freebsd4.6
> configure:1713: checking for gcc
> configure:1736: result: cc
> configure:1964: checking for C compiler version
> configure:1967: cc --version </dev/null >&5
> 2.95.3
> configure:1970: $? =3D 0
> configure:1972: cc -v </dev/null >&5
> Using builtin specs.
> gcc version 2.95.3 20010315 (release) [FreeBSD]
> configure:1975: $? =3D 0
> configure:1977: cc -V </dev/null >&5
> cc: argument to `-V' is missing
> configure:1980: $? =3D 1
> configure:2000: checking for C compiler default output
> configure:2003: cc -O -pipe -I/usr/local/include -L/usr/local/lib -pthre=
ad conftest.c >&5
> configure:2006: $? =3D 0
> configure:2035: result: a.out
> configure:2040: checking whether the C compiler works
> configure:2046: ./a.out
> configure:2049: $? =3D 0
> configure:2064: result: yes
> configure:2071: checking whether we are cross compiling
> configure:2073: result: no
> configure:2076: checking for executable suffix
> configure:2078: cc -o conftest -O -pipe -I/usr/local/include -L/usr/loca=
l/lib -pthread conftest.c >&5
> configure:2081: $? =3D 0
> configure:2103: result:=20
> configure:2109: checking for object suffix
> configure:2127: cc -c -O -pipe -I/usr/local/include conftest.c >&5
> configure:2130: $? =3D 0
> configure:2149: result: o
> configure:2153: checking whether we are using the GNU C compiler
> configure:2174: cc -c -O -pipe -I/usr/local/include conftest.c >&5
> configure:2177: $? =3D 0
> configure:2180: test -s conftest.o
> configure:2183: $? =3D 0
> configure:2195: result: yes
> configure:2201: checking whether cc accepts -g
> configure:2219: cc -c -g -I/usr/local/include conftest.c >&5
> configure:2222: $? =3D 0
> configure:2225: test -s conftest.o
> configure:2228: $? =3D 0
> configure:2238: result: yes
> configure:2265: cc -c -O -pipe -I/usr/local/include conftest.c >&5
> conftest.c:2: syntax error before `me'
> configure:2268: $? =3D 1
> configure: failed program was:
> #ifndef __cplusplus
> choke me
> #endif
> configure:2387: checking for ld used by GCC
> configure:2450: result: /usr/libexec/elf/ld
> configure:2459: checking if the linker (/usr/libexec/elf/ld) is GNU ld
> GNU ld version 2.11.2 20010719 [FreeBSD] (with BFD 2.11.2 20010719 [FreeB=
SD])
> configure:2471: result: yes
> configure:2475: checking for /usr/libexec/elf/ld option to reload object =
files
> configure:2482: result: -r
> configure:2487: checking for BSD-compatible nm
> configure:2523: result: /usr/bin/nm -B
> configure:2526: checking whether ln -s works
> configure:2530: result: yes
> configure:2537: checking how to recognise dependant libraries
> configure:2715: result: pass_all
> configure:2721: checking command to parse /usr/bin/nm -B output
> configure:2802: cc -c -O -pipe -I/usr/local/include conftest.c >&5
> configure:2805: $? =3D 0
> configure:2809: /usr/bin/nm -B conftest.o \| sed -n -e 's/^.*[ ]\([ABCDG=
ISTW][ABCDGISTW]*\)[ ][ ]*\(\)\([_A-Za-z][_A-Za-z0-9]*\)$/\1 \2\3 \3/p' \=
> conftest.nm
> configure:2812: $? =3D 0
> configure:2864: cc -o conftest -O -pipe -I/usr/local/include -L/usr/loca=
l/lib -pthread conftest.c conftstm.o >&5
> configure:2867: $? =3D 0
> configure:2911: result: ok
> configure:2920: checking how to run the C preprocessor
> configure:2946: cc -E -I/usr/local/include conftest.c
> configure:2952: $? =3D 0
> configure:2979: cc -E -I/usr/local/include conftest.c
> configure:2976: ac_nonexistent.h: No such file or directory
> configure:2985: $? =3D 1
> configure: failed program was:
> #line 2975 "configure"
> #include "confdefs.h"
> #include <ac_nonexistent.h>
> configure:3022: result: cc -E
> configure:3037: cc -E -I/usr/local/include conftest.c
> configure:3043: $? =3D 0
> configure:3070: cc -E -I/usr/local/include conftest.c
> configure:3067: ac_nonexistent.h: No such file or directory
> configure:3076: $? =3D 1
> configure: failed program was:
> #line 3066 "configure"
> #include "confdefs.h"
> #include <ac_nonexistent.h>
> configure:3118: checking for dlfcn.h
> configure:3128: cc -E -I/usr/local/include conftest.c
> configure:3134: $? =3D 0
> configure:3153: result: yes
> configure:3340: checking for ranlib
> configure:3355: found /usr/bin/ranlib
> configure:3364: result: ranlib
> configure:3414: checking for strip
> configure:3429: found /usr/bin/strip
> configure:3438: result: strip
> configure:3640: checking for objdir
> configure:3651: result: .libs
> configure:3666: checking for cc option to produce PIC
> configure:3816: result: -fPIC
> configure:3820: checking if cc PIC flag -fPIC works
> configure:3840: cc -c -O -pipe -fPIC -DPIC -I/usr/local/include conftest=
.c >&5
> configure:3843: $? =3D 0
> configure:3846: test -s conftest.o
> configure:3849: $? =3D 0
> configure:3885: result: yes
> configure:3901: checking if cc static flag -static works
> configure:3922: cc -o conftest -O -pipe -I/usr/local/include -L/usr/loca=
l/lib -pthread -static conftest.c >&5
> configure:3925: $? =3D 0
> configure:3928: test -s conftest
> configure:3931: $? =3D 0
> configure:3945: result: yes
> configure:3956: checking if cc supports -c -o file.o
> configure:3976: cc -c -O -pipe -o out/conftest2.o -I/usr/local/include c=
onftest.c >&5
> configure:4000: result: yes
> configure:4005: checking if cc supports -c -o file.lo
> configure:4029: cc -c -O -pipe -c -o conftest.lo -I/usr/local/include co=
nftest.c >&5
> configure:4032: $? =3D 0
> configure:4035: test -s conftest.lo
> configure:4038: $? =3D 0
> configure:4059: result: yes
> configure:4090: checking if cc supports -fno-rtti -fno-exceptions
> configure:4109: cc -c -O -pipe -fno-rtti -fno-exceptions -c conftest.c -=
I/usr/local/include conftest.c >&5
> configure:4112: $? =3D 0
> configure:4115: test -s conftest.o
> configure:4118: $? =3D 0
> configure:4134: result: yes
> configure:4145: checking whether the linker (/usr/libexec/elf/ld) support=
s shared libraries
> configure:4825: result: yes
> configure:4830: checking how to hardcode library paths into programs
> configure:4854: result: immediate
> configure:4859: checking whether stripping libraries is possible
> configure:4864: result: yes
> configure:4875: checking dynamic linker characteristics
> configure:5268: result: freebsd4.6 ld.so
> configure:5273: checking if libtool supports shared libraries
> configure:5275: result: yes
> configure:5278: checking whether to build shared libraries
> configure:5299: result: yes
> configure:5302: checking whether to build static libraries
> configure:5306: result: no
> configure:5924: checking whether -lc should be explicitly linked in
> configure:5932: cc -c -O -pipe -I/usr/local/include conftest.c >&5
> configure:5935: $? =3D 0
> configure:5949: cc -shared conftest.o -v -Wl,-soname -Wl,conftest -o con=
ftest 2\>\&1 \| grep -lc \>/dev/null 2\>\&1
> configure:5952: $? =3D 1
> configure:5965: result: yes
> configure:6530: checking whether build environment is sane
> configure:6573: result: yes
> configure:6619: checking for gcc
> configure:6642: result: cc
> configure:6870: checking for C compiler version
> configure:6873: cc --version </dev/null >&5
> 2.95.3
> configure:6876: $? =3D 0
> configure:6878: cc -v </dev/null >&5
> Using builtin specs.
> gcc version 2.95.3 20010315 (release) [FreeBSD]
> configure:6881: $? =3D 0
> configure:6883: cc -V </dev/null >&5
> cc: argument to `-V' is missing
> configure:6886: $? =3D 1
> configure:6889: checking whether we are using the GNU C compiler
> configure:6931: result: yes
> configure:6937: checking whether cc accepts -g
> configure:6974: result: yes
> configure:7001: cc -c -O -pipe -I/usr/local/include conftest.c >&5
> conftest.c:2: syntax error before `me'
> configure:7004: $? =3D 1
> configure: failed program was:
> #ifndef __cplusplus
> choke me
> #endif
> configure:7107: checking for flex
> configure:7122: found /usr/bin/flex
> configure:7130: result: flex
> configure:7145: checking for flex
> configure:7168: result: flex
> configure:7181: checking for yywrap in -lfl
> configure:7208: cc -o conftest -O -pipe -I/usr/local/include -L/usr/loca=
l/lib -pthread conftest.c -lfl >&5
> configure:7211: $? =3D 0
> configure:7214: test -s conftest
> configure:7217: $? =3D 0
> configure:7228: result: yes
> configure:7291: checking lex output file root
> configure:7310: result: lex.yy
> configure:7314: checking whether yytext is a pointer
> configure:7330: cc -o conftest -O -pipe -I/usr/local/include -L/usr/loca=
l/lib -pthread conftest.c -lfl >&5
> configure:7333: $? =3D 0
> configure:7336: test -s conftest
> configure:7339: $? =3D 0
> configure:7351: result: yes
> configure:7375: checking for a BSD compatible install
> configure:7424: result: /usr/bin/install -c -o root -g wheel
> configure:7435: checking whether ln -s works
> configure:7439: result: yes
> configure:7446: checking whether gmake sets ${MAKE}
> configure:7466: result: yes
> configure:7475: checking for strerror in -lcposix
> configure:7502: cc -o conftest -O -pipe -I/usr/local/include -L/usr/loca=
l/lib -pthread conftest.c -lcposix >&5
> /usr/libexec/elf/ld: cannot find -lcposix
> configure:7505: $? =3D 1
> configure: failed program was:
> #line 7483 "configure"
> #include "confdefs.h"
>=20
> /* Override any gcc2 internal prototype to avoid an error. */
> #ifdef __cplusplus
> extern "C"
> #endif
> /* We use char because int might match the return type of a gcc2
> builtin and then its argument prototype would still apply. */
> char strerror ();
> int
> main ()
> {
> strerror ();
> ;
> return 0;
> }
> configure:7522: result: no
> configure:7532: checking for bison
> configure:7547: found /usr/local/bin/bison
> configure:7555: result: bison -y
> configure:7618: checking for ranlib
> configure:7642: result: ranlib
> configure:7654: checking for ANSI C header files
> configure:7668: cc -E -I/usr/local/include conftest.c
> configure:7674: $? =3D 0
> configure:7761: cc -o conftest -O -pipe -I/usr/local/include -L/usr/loca=
l/lib -pthread conftest.c >&5
> configure:7764: $? =3D 0
> configure:7766: ./conftest
> configure:7769: $? =3D 0
> configure:7782: result: yes
> configure:7792: checking for cc option to accept ANSI C
> configure:7849: cc -c -O -pipe -I/usr/local/include conftest.c >&5
> configure:7852: $? =3D 0
> configure:7855: test -s conftest.o
> configure:7858: $? =3D 0
> configure:7875: result: none needed
> configure:7883: checking for an ANSI C-conforming const
> configure:7947: cc -c -O -pipe -I/usr/local/include conftest.c >&5
> configure:7950: $? =3D 0
> configure:7953: test -s conftest.o
> configure:7956: $? =3D 0
> configure:7966: result: yes
> configure:7976: checking for inline
> configure:7993: cc -c -O -pipe -I/usr/local/include conftest.c >&5
> configure:7996: $? =3D 0
> configure:7999: test -s conftest.o
> configure:8002: $? =3D 0
> configure:8013: result: inline
> configure:8034: checking for sys/types.h
> configure:8046: cc -c -O -pipe -I/usr/local/include conftest.c >&5
> configure:8049: $? =3D 0
> configure:8052: test -s conftest.o
> configure:8055: $? =3D 0
> configure:8065: result: yes
> configure:8034: checking for sys/stat.h
> configure:8046: cc -c -O -pipe -I/usr/local/include conftest.c >&5
> configure:8049: $? =3D 0
> configure:8052: test -s conftest.o
> configure:8055: $? =3D 0
> configure:8065: result: yes
> configure:8034: checking for stdlib.h
> configure:8046: cc -c -O -pipe -I/usr/local/include conftest.c >&5
> configure:8049: $? =3D 0
> configure:8052: test -s conftest.o
> configure:8055: $? =3D 0
> configure:8065: result: yes
> configure:8034: checking for string.h
> configure:8046: cc -c -O -pipe -I/usr/local/include conftest.c >&5
> configure:8049: $? =3D 0
> configure:8052: test -s conftest.o
> configure:8055: $? =3D 0
> configure:8065: result: yes
> configure:8034: checking for memory.h
> configure:8046: cc -c -O -pipe -I/usr/local/include conftest.c >&5
> configure:8049: $? =3D 0
> configure:8052: test -s conftest.o
> configure:8055: $? =3D 0
> configure:8065: result: yes
> configure:8034: checking for strings.h
> configure:8046: cc -c -O -pipe -I/usr/local/include conftest.c >&5
> configure:8049: $? =3D 0
> configure:8052: test -s conftest.o
> configure:8055: $? =3D 0
> configure:8065: result: yes
> configure:8034: checking for inttypes.h
> configure:8046: cc -c -O -pipe -I/usr/local/include conftest.c >&5
> configure:8049: $? =3D 0
> configure:8052: test -s conftest.o
> configure:8055: $? =3D 0
> configure:8065: result: yes
> configure:8034: checking for stdint.h
> configure:8046: cc -c -O -pipe -I/usr/local/include conftest.c >&5
> configure:8075: stdint.h: No such file or directory
> configure:8049: $? =3D 1
> configure: failed program was:
> #line 8040 "configure"
> #include "confdefs.h"
> #include <stdio.h>
> #if HAVE_SYS_TYPES_H
> # include <sys/types.h>
> #endif
> #if HAVE_SYS_STAT_H
> # include <sys/stat.h>
> #endif
> #if STDC_HEADERS
> # include <stdlib.h>
> # include <stddef.h>
> #else
> # if HAVE_STDLIB_H
> # include <stdlib.h>
> # endif
> #endif
> #if HAVE_STRING_H
> # if !STDC_HEADERS && HAVE_MEMORY_H
> # include <memory.h>
> # endif
> # include <string.h>
> #endif
> #if HAVE_STRINGS_H
> # include <strings.h>
> #endif
> #if HAVE_INTTYPES_H
> # include <inttypes.h>
> #else
> # if HAVE_STDINT_H
> # include <stdint.h>
> # endif
> #endif
> #if HAVE_UNISTD_H
> # include <unistd.h>
> #endif
> #include <stdint.h>
> configure:8065: result: no
> configure:8034: checking for unistd.h
> configure:8046: cc -c -O -pipe -I/usr/local/include conftest.c >&5
> configure:8049: $? =3D 0
> configure:8052: test -s conftest.o
> configure:8055: $? =3D 0
> configure:8065: result: yes
> configure:8075: checking for off_t
> configure:8096: cc -c -O -pipe -I/usr/local/include conftest.c >&5
> configure:8099: $? =3D 0
> configure:8102: test -s conftest.o
> configure:8105: $? =3D 0
> configure:8115: result: yes
> configure:8127: checking for size_t
> configure:8148: cc -c -O -pipe -I/usr/local/include conftest.c >&5
> configure:8151: $? =3D 0
> configure:8154: test -s conftest.o
> configure:8157: $? =3D 0
> configure:8167: result: yes
> configure:8181: checking for working alloca.h
> configure:8199: cc -o conftest -O -pipe -I/usr/local/include -L/usr/loca=
l/lib -pthread conftest.c >&5
> configure:8188: alloca.h: No such file or directory
> configure:8202: $? =3D 1
> configure: failed program was:
> #line 8187 "configure"
> #include "confdefs.h"
> #include <alloca.h>
> int
> main ()
> {
> char *p =3D (char *) alloca (2 * sizeof (int));
> ;
> return 0;
> }
> configure:8218: result: no
> configure:8228: checking for alloca
> configure:8266: cc -o conftest -O -pipe -I/usr/local/include -L/usr/loca=
l/lib -pthread conftest.c >&5
> configure:8269: $? =3D 0
> configure:8272: test -s conftest
> configure:8275: $? =3D 0
> configure:8285: result: yes
> configure:8469: checking for stdlib.h
> configure:8504: result: yes
> configure:8469: checking for unistd.h
> configure:8504: result: yes
> configure:8517: checking for getpagesize
> configure:8554: cc -o conftest -O -pipe -I/usr/local/include -L/usr/loca=
l/lib -pthread conftest.c >&5
> configure:8557: $? =3D 0
> configure:8560: test -s conftest
> configure:8563: $? =3D 0
> configure:8573: result: yes
> configure:8583: checking for working mmap
> configure:8719: cc -o conftest -O -pipe -I/usr/local/include -L/usr/loca=
l/lib -pthread conftest.c >&5
> configure:8722: $? =3D 0
> configure:8724: ./conftest
> configure:8727: $? =3D 0
> configure:8739: result: yes
> configure:8754: checking for argz.h
> configure:8764: cc -E -I/usr/local/include conftest.c
> configure:8761: argz.h: No such file or directory
> configure:8770: $? =3D 1
> configure: failed program was:
> #line 8760 "configure"
> #include "confdefs.h"
> #include <argz.h>
> configure:8789: result: no
> configure:8754: checking for limits.h
> configure:8764: cc -E -I/usr/local/include conftest.c
> configure:8770: $? =3D 0
> configure:8789: result: yes
> configure:8754: checking for locale.h
> configure:8764: cc -E -I/usr/local/include conftest.c
> configure:8770: $? =3D 0
> configure:8789: result: yes
> configure:8754: checking for nl_types.h
> configure:8764: cc -E -I/usr/local/include conftest.c
> configure:8770: $? =3D 0
> configure:8789: result: yes
> configure:8754: checking for malloc.h
> configure:8764: cc -E -I/usr/local/include conftest.c
> In file included from configure:8761:
> /usr/include/malloc.h:2: warning: #warning "this file includes <malloc.h>=
which is deprecated, use <stdlib.h> instead"
> configure:8770: $? =3D 0
> configure:8789: result: yes
> configure:8754: checking for string.h
> configure:8789: result: yes
> configure:8754: checking for unistd.h
> configure:8789: result: yes
> configure:8754: checking for sys/param.h
> configure:8764: cc -E -I/usr/local/include conftest.c
> configure:8770: $? =3D 0
> configure:8789: result: yes
> configure:8803: checking for getcwd
> configure:8840: cc -o conftest -O -pipe -I/usr/local/include -L/usr/loca=
l/lib -pthread conftest.c >&5
> configure:8843: $? =3D 0
> configure:8846: test -s conftest
> configure:8849: $? =3D 0
> configure:8859: result: yes
> configure:8803: checking for munmap
> configure:8840: cc -o conftest -O -pipe -I/usr/local/include -L/usr/loca=
l/lib -pthread conftest.c >&5
> configure:8843: $? =3D 0
> configure:8846: test -s conftest
> configure:8849: $? =3D 0
> configure:8859: result: yes
> configure:8803: checking for putenv
> configure:8840: cc -o conftest -O -pipe -I/usr/local/include -L/usr/loca=
l/lib -pthread conftest.c >&5
> configure:8843: $? =3D 0
> configure:8846: test -s conftest
> configure:8849: $? =3D 0
> configure:8859: result: yes
> configure:8803: checking for setenv
> configure:8840: cc -o conftest -O -pipe -I/usr/local/include -L/usr/loca=
l/lib -pthread conftest.c >&5
> configure:8843: $? =3D 0
> configure:8846: test -s conftest
> configure:8849: $? =3D 0
> configure:8859: result: yes
> configure:8803: checking for setlocale
> configure:8840: cc -o conftest -O -pipe -I/usr/local/include -L/usr/loca=
l/lib -pthread conftest.c >&5
> configure:8843: $? =3D 0
> configure:8846: test -s conftest
> configure:8849: $? =3D 0
> configure:8859: result: yes
> configure:8803: checking for strchr
> configure:8840: cc -o conftest -O -pipe -I/usr/local/include -L/usr/loca=
l/lib -pthread conftest.c >&5
> configure:8843: $? =3D 0
> configure:8846: test -s conftest
> configure:8849: $? =3D 0
> configure:8859: result: yes
> configure:8803: checking for strcasecmp
> configure:8840: cc -o conftest -O -pipe -I/usr/local/include -L/usr/loca=
l/lib -pthread conftest.c >&5
> configure:8843: $? =3D 0
> configure:8846: test -s conftest
> configure:8849: $? =3D 0
> configure:8859: result: yes
> configure:8803: checking for strdup
> configure:8840: cc -o conftest -O -pipe -I/usr/local/include -L/usr/loca=
l/lib -pthread conftest.c >&5
> configure:8843: $? =3D 0
> configure:8846: test -s conftest
> configure:8849: $? =3D 0
> configure:8859: result: yes
> configure:8803: checking for __argz_count
> configure:8840: cc -o conftest -O -pipe -I/usr/local/include -L/usr/loca=
l/lib -pthread conftest.c >&5
> /tmp/ccuaMGk5.o: In function `main':
> /tmp/ccuaMGk5.o(.text+0x9): undefined reference to `__argz_count'
> configure:8843: $? =3D 1
> configure: failed program was:
> #line 8809 "configure"
> #include "confdefs.h"
> /* System header to define __stub macros and hopefully few prototypes,
> which can conflict with char __argz_count (); below. */
> #include <assert.h>
> /* Override any gcc2 internal prototype to avoid an error. */
> #ifdef __cplusplus
> extern "C"
> #endif
> /* We use char because int might match the return type of a gcc2
> builtin and then its argument prototype would still apply. */
> char __argz_count ();
> char (*f) ();
>=20
> int
> main ()
> {
> /* The GNU C library defines this for functions which it implements
> to always fail with ENOSYS. Some functions are actually named
> something starting with __ and the normal name is an alias. */
> #if defined (__stub___argz_count) || defined (__stub_____argz_count)
> choke me
> #else
> f =3D __argz_count;
> #endif
>=20
> ;
> return 0;
> }
> configure:8859: result: no
> configure:8803: checking for __argz_stringify
> configure:8840: cc -o conftest -O -pipe -I/usr/local/include -L/usr/loca=
l/lib -pthread conftest.c >&5
> /tmp/cc4lJ2Ws.o: In function `main':
> /tmp/cc4lJ2Ws.o(.text+0x9): undefined reference to `__argz_stringify'
> configure:8843: $? =3D 1
> configure: failed program was:
> #line 8809 "configure"
> #include "confdefs.h"
> /* System header to define __stub macros and hopefully few prototypes,
> which can conflict with char __argz_stringify (); below. */
> #include <assert.h>
> /* Override any gcc2 internal prototype to avoid an error. */
> #ifdef __cplusplus
> extern "C"
> #endif
> /* We use char because int might match the return type of a gcc2
> builtin and then its argument prototype would still apply. */
> char __argz_stringify ();
> char (*f) ();
>=20
> int
> main ()
> {
> /* The GNU C library defines this for functions which it implements
> to always fail with ENOSYS. Some functions are actually named
> something starting with __ and the normal name is an alias. */
> #if defined (__stub___argz_stringify) || defined (__stub_____argz_stringi=
fy)
> choke me
> #else
> f =3D __argz_stringify;
> #endif
>=20
> ;
> return 0;
> }
> configure:8859: result: no
> configure:8803: checking for __argz_next
> configure:8840: cc -o conftest -O -pipe -I/usr/local/include -L/usr/loca=
l/lib -pthread conftest.c >&5
> /tmp/cchNrZ4c.o: In function `main':
> /tmp/cchNrZ4c.o(.text+0x9): undefined reference to `__argz_next'
> configure:8843: $? =3D 1
> configure: failed program was:
> #line 8809 "configure"
> #include "confdefs.h"
> /* System header to define __stub macros and hopefully few prototypes,
> which can conflict with char __argz_next (); below. */
> #include <assert.h>
> /* Override any gcc2 internal prototype to avoid an error. */
> #ifdef __cplusplus
> extern "C"
> #endif
> /* We use char because int might match the return type of a gcc2
> builtin and then its argument prototype would still apply. */
> char __argz_next ();
> char (*f) ();
>=20
> int
> main ()
> {
> /* The GNU C library defines this for functions which it implements
> to always fail with ENOSYS. Some functions are actually named
> something starting with __ and the normal name is an alias. */
> #if defined (__stub___argz_next) || defined (__stub_____argz_next)
> choke me
> #else
> f =3D __argz_next;
> #endif
>=20
> ;
> return 0;
> }
> configure:8859: result: no
> configure:8870: checking for LC_MESSAGES
> configure:8888: cc -o conftest -O -pipe -I/usr/local/include -L/usr/loca=
l/lib -pthread conftest.c >&5
> configure:8891: $? =3D 0
> configure:8894: test -s conftest
> configure:8897: $? =3D 0
> configure:8907: result: yes
> configure:8928: checking for libintl.h
> configure:8938: cc -E -I/usr/local/include conftest.c
> configure:8944: $? =3D 0
> configure:8963: result: yes
> configure:8966: checking for dgettext in libc
> configure:8984: cc -o conftest -O -pipe -I/usr/local/include -L/usr/loca=
l/lib -pthread conftest.c >&5
> /tmp/ccLesPFq.o: In function `main':
> /tmp/ccLesPFq.o(.text+0x14): undefined reference to `dgettext'
> configure:8987: $? =3D 1
> configure: failed program was:
> #line 8972 "configure"
> #include "confdefs.h"
> #include <libintl.h>
> int
> main ()
> {
> return (int) dgettext ("","")
> ;
> return 0;
> }
> configure:9003: result: no
> configure:9010: checking for bindtextdomain in -lintl
> configure:9037: cc -o conftest -O -pipe -I/usr/local/include -L/usr/loca=
l/lib -pthread conftest.c -lintl >&5
> configure:9040: $? =3D 0
> configure:9043: test -s conftest
> configure:9046: $? =3D 0
> configure:9057: result: yes
> configure:9060: checking for dgettext in -lintl
> configure:9087: cc -o conftest -O -pipe -I/usr/local/include -L/usr/loca=
l/lib -pthread conftest.c -lintl >&5
> configure:9090: $? =3D 0
> configure:9093: test -s conftest
> configure:9096: $? =3D 0
> configure:9107: result: yes
> configure:9116: checking if -liconv is needed to use gettext
> configure:9118: result:=20
> configure:9120: checking for dcgettext in -lintl
> configure:9147: cc -o conftest -O -pipe -I/usr/local/include -L/usr/loca=
l/lib -pthread conftest.c -lintl -liconv >&5
> configure:9150: $? =3D 0
> configure:9153: test -s conftest
> configure:9156: $? =3D 0
> configure:9167: result: yes
> configure:9192: checking for msgfmt
> configure:9219: result: /usr/local/bin/msgfmt
> configure:9230: checking for dcgettext
> configure:9267: cc -o conftest -O -pipe -I/usr/local/include -L/usr/loca=
l/lib -pthread conftest.c -lintl -liconv >&5
> configure:9270: $? =3D 0
> configure:9273: test -s conftest
> configure:9276: $? =3D 0
> configure:9286: result: yes
> configure:9298: checking for gmsgfmt
> configure:9327: result: /usr/local/bin/msgfmt
> configure:9336: checking for xgettext
> configure:9363: result: /usr/local/bin/xgettext
> configure:9384: cc -o conftest -O -pipe -I/usr/local/include -L/usr/loca=
l/lib -pthread conftest.c -lintl -liconv >&5
> configure:9387: $? =3D 0
> configure:9390: test -s conftest
> configure:9393: $? =3D 0
> configure:9456: checking for catalogs to be installed
> configure:9465: result: az ar bg ca da de el es fi fr ga gl hu it ja ko =
lv ms nl nn no pl pt pt_BR ro ru sk sl sv ta tr uk vi zh_CN zh_TW
> configure:9549: checking for pkg-config
> configure:9566: found /usr/local/bin/pkg-config
> configure:9578: result: /usr/local/bin/pkg-config
> configure:9595: checking for gmodule-2.0 >=3D 2.0.1 ORBit-2.0 >=3D 2.4.=
0
> configure:9605: result: yes
> configure:9609: checking BONOBO_ACTIVATION_CFLAGS
> configure:9614: result: -D_REENTRANT -D_THREAD_SAFE -DORB=
IT2=3D1 -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include -I/=
usr/local/include/orbit-2.0 -I/usr/local/include/linc-1.0 =20
> configure:9617: checking BONOBO_ACTIVATION_LIBS
> configure:9622: result: -pthread -pthread -L/usr/loca=
l/lib -lORBit-2 -lgthread-2.0 -lgobject-2.0 -lgmodule-2.0 -lglib-2.0 -lintl=
-liconv -lm -llinc =20
> configure:9704: checking for gmodule-2.0 >=3D 2.0.1 ORBit-2.0 >=3D 2.4.=
0 ORBit-CosNaming-2.0 >=3D 2.4.0 libxml-2.0 >=3D 2.4.20
> configure:9765: error: Library requirements ( gmodule-2.0 >=3D 2.0.1 ORB=
it-2.0 >=3D 2.4.0 ORBit-CosNaming-2.0 >=3D 2.4.0 libxml-2.0 >=3D 2.4.20) =
not met; consider adjusting the PKG_CONFIG_PATH environment variable if you=
r libraries are in a nonstandard prefix so pkg-config can find them.
>=20
> ## ----------------- ##
> ## Cache variables. ##
> ## ----------------- ##
>=20
> ac_cv_type_size_t=3D'yes'
> ac_cv_path_XGETTEXT=3D'/usr/local/bin/xgettext'
> ac_cv_func_getcwd=3D'yes'
> ac_cv_lib_fl_yywrap=3D'yes'
> gt_cv_func_dgettext_libc=3D'no'
> ac_cv_header_stdlib_h=3D'yes'
> lt_cv_file_magic_cmd=3D'$MAGIC_CMD'
> ac_cv_header_nl_types_h=3D'yes'
> ac_cv_lib_cposix_strerror=3D'no'
> ac_cv_prog_cc_g=3D'yes'
> ac_cv_path_INTLTOOL_PERL=3D'/usr/bin/perl'
> ac_cv_env_LDFLAGS_set=3D'set'
> ac_cv_path_PKG_CONFIG=3D'/usr/local/bin/pkg-config'
> lt_cv_prog_cc_can_build_shared=3D'yes'
> ac_cv_c_compiler_gnu=3D'yes'
> ac_cv_env_CFLAGS_set=3D'set'
> ac_cv_func_setlocale=3D'yes'
> ac_cv_func_mmap_fixed_mapped=3D'yes'
> ac_cv_prog_make_gmake_set=3D'yes'
> ac_cv_env_CPP_value=3D''
> ac_cv_env_CPPFLAGS_set=3D'set'
> ac_cv_lib_intl_dcgettext=3D'yes'
> ac_cv_func_strcasecmp=3D'yes'
> lt_cv_prog_cc_static_works=3D'yes'
> lt_cv_prog_cc_no_builtin=3D''
> lt_cv_prog_cc_shlib=3D''
> ac_cv_func___argz_count=3D'no'
> lt_cv_prog_cc_static=3D'-static'
> ac_cv_env_host_alias_set=3D''
> ac_cv_path_GMSGFMT=3D'/usr/local/bin/msgfmt'
> ac_cv_c_const=3D'yes'
> ac_cv_prog_YACC=3D'bison -y'
> lt_cv_ld_reload_flag=3D'-r'
> ac_cv_working_alloca_h=3D'no'
> lt_cv_sys_path_separator=3D':'
> ac_cv_func_munmap=3D'yes'
> ac_cv_header_sys_stat_h=3D'yes'
> ac_cv_prog_lex_root=3D'lex.yy'
> lt_cv_archive_cmds_need_lc=3D'yes'
> lt_cv_prog_gnu_ld=3D'yes'
> ac_cv_env_build_alias_set=3D''
> ac_cv_header_limits_h=3D'yes'
> ac_cv_env_LDFLAGS_value=3D'-L/usr/local/lib -pthread'
> ac_cv_env_target_alias_set=3D'set'
> ac_cv_func_alloca_works=3D'yes'
> ac_cv_prog_cc_stdc=3D''
> ac_cv_host_alias=3D'i386-unknown-freebsd4.6'
> ac_cv_env_CFLAGS_value=3D'-O -pipe '
> ac_cv_env_CC_set=3D'set'
> ac_cv_path_MSGFMT=3D'/usr/local/bin/msgfmt'
> ac_cv_header_sys_types_h=3D'yes'
> ac_cv_header_stdc=3D'yes'
> lt_cv_prog_cc_wl=3D'-Wl,'
> ac_cv_func___argz_stringify=3D'no'
> ac_cv_header_strings_h=3D'yes'
> ac_cv_func_dcgettext=3D'yes'
> ac_cv_header_stdint_h=3D'no'
> ac_cv_header_inttypes_h=3D'yes'
> nls_cv_header_intl=3D''
> ac_cv_func___argz_next=3D'no'
> ac_cv_func_setenv=3D'yes'
> ac_cv_header_sys_param_h=3D'yes'
> ac_cv_header_locale_h=3D'yes'
> ac_cv_header_unistd_h=3D'yes'
> ac_cv_header_string_h=3D'yes'
> ac_cv_c_inline=3D'inline'
> lt_cv_global_symbol_to_cdecl=3D'sed -n -e '\''s/^. .* \(.*\)$/extern char=
\1;/p'\'''
> lt_cv_path_LD=3D'/usr/libexec/elf/ld'
> ac_cv_build_alias=3D'i386-unknown-freebsd4.6'
> ac_cv_env_CPPFLAGS_value=3D'-I/usr/local/include'
> ac_cv_func_strchr=3D'yes'
> ac_cv_header_memory_h=3D'yes'
> ac_cv_prog_ac_ct_RANLIB=3D'ranlib'
> ac_cv_prog_ac_ct_STRIP=3D'strip'
> ac_cv_host=3D'i386-unknown-freebsd4.6'
> ac_cv_env_host_alias_value=3D''
> am_cv_val_LC_MESSAGES=3D'yes'
> ac_cv_type_off_t=3D'yes'
> ac_cv_lib_intl_dgettext=3D'yes'
> nls_cv_force_use_gnu_gettext=3D'no'
> lt_cv_global_symbol_to_c_name_address=3D'sed -n -e '\''s/^: \([^ ]*\) $/ =
{\"\1\", (lt_ptr) 0},/p'\'' -e '\''s/^[BCDEGRST] \([^ ]*\) \([^ ]*\)$/ {"=
\2", (lt_ptr) \&\2},/p'\'''
> ac_cv_lib_intl_bindtextdomain=3D'yes'
> gt_cv_func_dgettext_libintl=3D'yes'
> lt_cv_compiler_c_o=3D'yes'
> lt_cv_prog_cc_pic_works=3D'yes'
> lt_cv_file_magic_test_file=3D''
> nls_cv_use_gnu_gettext=3D'no'
> ac_cv_header_argz_h=3D'no'
> ac_cv_prog_CPP=3D'cc -E'
> ac_cv_build=3D'i386-unknown-freebsd4.6'
> ac_cv_env_build_alias_value=3D''
> ac_cv_header_malloc_h=3D'yes'
> ac_cv_func_getpagesize=3D'yes'
> ac_cv_prog_lex_yytext_pointer=3D'yes'
> lt_cv_prog_cc_pic=3D' -fPIC'
> lt_cv_sys_global_symbol_pipe=3D'sed -n -e '\''s/^.*[ ]\([ABCDGISTW][ABCD=
GISTW]*\)[ ][ ]*\(\)\([_A-Za-z][_A-Za-z0-9]*\)$/\1 \2\3 \3/p'\'''
> lt_cv_deplibs_check_method=3D'pass_all'
> ac_cv_prog_ac_ct_CC=3D'cc'
> ac_cv_header_libintl_h=3D'yes'
> lt_cv_compiler_o_lo=3D'yes'
> ac_cv_env_target_alias_value=3D'i386-unknown-freebsd4.6'
> ac_cv_env_CC_value=3D'cc'
> lt_cv_path_NM=3D'/usr/bin/nm -B'
> ac_cv_env_CPP_set=3D''
> ac_cv_header_dlfcn_h=3D'yes'
> nls_cv_header_libgt=3D''
> ac_cv_func_strdup=3D'yes'
> ac_cv_func_putenv=3D'yes'
> ac_cv_prog_LEX=3D'flex'
> ac_cv_objext=3D'o'
>=20
> ## ------------ ##
> ## confdefs.h. ##
> ## ------------ ##
>=20
> #define PACKAGE "bonobo-activation"
> #define VERSION "1.0.2"
> #define HAVE_DLFCN_H 1
> #define YYTEXT_POINTER 1
> #define GETTEXT_PACKAGE "bonobo-activation"
> #define STDC_HEADERS 1
> #define HAVE_SYS_TYPES_H 1
> #define HAVE_SYS_STAT_H 1
> #define HAVE_STDLIB_H 1
> #define HAVE_STRING_H 1
> #define HAVE_MEMORY_H 1
> #define HAVE_STRINGS_H 1
> #define HAVE_INTTYPES_H 1
> #define HAVE_UNISTD_H 1
> #define HAVE_ALLOCA 1
> #define HAVE_STDLIB_H 1
> #define HAVE_UNISTD_H 1
> #define HAVE_GETPAGESIZE 1
> #define HAVE_MMAP 1
> #define HAVE_LIMITS_H 1
> #define HAVE_LOCALE_H 1
> #define HAVE_NL_TYPES_H 1
> #define HAVE_MALLOC_H 1
> #define HAVE_STRING_H 1
> #define HAVE_UNISTD_H 1
> #define HAVE_SYS_PARAM_H 1
> #define HAVE_GETCWD 1
> #define HAVE_MUNMAP 1
> #define HAVE_PUTENV 1
> #define HAVE_SETENV 1
> #define HAVE_SETLOCALE 1
> #define HAVE_STRCHR 1
> #define HAVE_STRCASECMP 1
> #define HAVE_STRDUP 1
> #define HAVE_LC_MESSAGES 1
> #define HAVE_GETTEXT 1
> #define HAVE_DCGETTEXT 1
> #define ENABLE_NLS 1
>=20
>=20
> configure: exit 1
> ----
>=20
> Mesa-3.4.2_2
> ORBit-0.5.17
> ORBit2-2.4.0
> XFree86-4.2.0_1,1
> XFree86-FontServer-4.2.0
> XFree86-Server-4.2.0_3
> XFree86-clients-4.2.0_2
> XFree86-documents-4.2.0
> XFree86-font100dpi-4.2.0
> XFree86-font75dpi-4.2.0
> XFree86-fontCyrillic-4.2.0
> XFree86-fontDefaultBitmaps-4.2.0
> XFree86-fontEncodings-4.2.0
> XFree86-fontScalable-4.2.0
> XFree86-libraries-4.2.0_1
> aalib-1.4.r5_1
> arts-1.0.0_1
> aspell-0.33.7.1
> atk-1.0.2
> autoconf-2.53
> autoconf213-2.13.000227_1
> automake-1.5,1
> automake14-1.4.5
> bison-1.35_1
> cdrtools-1.11.a21
> cups-1.1.14
> cups-base-1.1.14
> cups-lpr-1.1.14
> cvsup-16.1f
> db3-3.2.9_3,1
> eperl-2.2.14
> esound-0.2.26_2
> expat-1.95.2
> fam-2.6.4
> freetype2-2.1.0_1
> g-wrap-1.1.9
> gconf-1.0.9
> gconf2-1.2.0
> gdbm-1.8.0
> gdk-pixbuf-0.17.0
> gettext-0.10.35_1
> gettext-0.11.1_2
> ghostscript-gnu-7.05_1
> glib-1.2.10_5
> glib-2.0.4
> gmake-3.79.1
> gnomeaudio-1.4.0
> gnomecanvas-0.17.0
> gnomelibs-1.4.1.7
> gnomemimedata-2.0.0
> gnomevfs-1.0.5_4
> gnupg-1.0.7
> gob-1.0.12
> gpa-0.4.3
> gtk-1.2.10_4
> gtk-2.0.5
> guile-1.4
> guile-1.4.1_1
> imake-4.2.0_1
> imlib-1.9.14_1
> javavmwrapper-1.4
> jpeg-6b_1
> jre-1.1.8
> kdebase-3.0.1
> kdegames-3.0_1
> kdegraphics-3.0_2
> kdelibs-3.0_1
> kdemultimedia-3.0_1
> kdenetwork-3.0_1
> kdeutils-3.0
> koffice-1.1.1,1
> lcms-1.08
> libIDL-0.8.0
> libart_lgpl2-2.3.8
> libaudiofile-0.2.3
> libghttp-1.0.9
> libglade2-2.0.0
> libgnomecanvas-2.0.1
> libgnugetopt-1.1
> libiconv-1.7_2
> libmikmod-3.1.10
> libmng-1.0.3
> libogg-1.0.r3_1,2
> libole2-0.2.4
> libtool-1.3.4_4
> libungif-4.1.0b1
> libunicode-0.4_3
> libvorbis-1.0.r3_1,2
> libwnck-0.14
> libwww-5.3.2
> libxml-1.8.17_1
> libxml2-2.4.19
> libxslt-1.0.15
> linc-0.5.0
> linux_base-6.1_1
> m4-1.4_1
> mkisofs-1.15.a21
> mozilla-1.0,1
> nasm-0.98.33,1
> nspr-4.1.2
> nss-3.3.1
> oaf-0.6.10
> objprelink-1.0_1
> p5-Authen-PAM-0.13
> p5-Date-Manip-5.40
> p5-Digest-MD5-2.20
> p5-Finance-Quote-1.06
> p5-HTML-0.6
> p5-HTML-Parser-3.26
> p5-HTML-TableExtract-1.08
> p5-HTML-Tagset-3.03
> p5-MIME-Base64-2.12
> p5-Net-1.11,1
> p5-Net-SSLeay-1.14
> p5-URI-1.19
> p5-libwww-5.53_1
> pango-1.0.3
> pcre-3.7
> pilot-link-0.9.5_4
> pkg_tarup-1.2_3
> pkgconfig-0.11.0_1
> pkgdb.db
> png-1.2.1
> popt-1.5.1
> portupgrade-20020429
> psiconv-0.8.3
> pspell-0.12.2_1
> py22-expat-2.2
> python-2.2_2
> qt-3.0.3_5
> rdesktop-1.0.0.p19.7.6_1
> rpm-3.0.6_5
> ruby-1.6.7.2002.05.02p
> ruby-bdb1-0.1.7
> ruby-fnmatch-1.1b_1
> ruby-optparse-0.8.6
> samba-2.2.3a
> scrollkeeper-0.2,1
> sdl-1.2.4_1
> sed_inplace-2002.06.17
> slib-2d1_2
> svgalib-1.4.2_1
> swig-1.1p5_8
> tcl-8.3.4_4
> tiff-3.5.7
> tk-8.3.4_3
> unzip-5.50
> uulib-0.5.13
> wrapper-1.0_2
> xanim-2.80.2
> xcdroast-0.98.a.9
> xmame-sdl-0.60.1
> xmms-esound-1.2.7_1
> xpm-3.4k
> zip-2.3_1
--=-PVnMXTmakZrfnNf6ckm2
Content-Type: application/pgp-signature; name=signature.asc
Content-Description: This is a digitally signed message part
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.0.7 (FreeBSD)
iD8DBQA9H6w9b2iPiv4Uz4cRArsWAKCGGpLEi0nLSnuPYx36VGl4UIMDXwCfe98g
XMladLT6Ijoyn8fmgIXAUsI=
=KGfO
-----END PGP SIGNATURE-----
--=-PVnMXTmakZrfnNf6ckm2--
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-gnome" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1025485885.48597.39.camel>