Date: Wed, 31 May 2000 09:43:45 -0400 From: Ian Cartwright <ICartwright@IT.RJF.com> To: "FreeBSD Questions (E-mail)" <freebsd-questions@FreeBSD.ORG>, "FreeBSD Hardware (E-mail)" <freebsd-hardware@freebsd.org> Subject: SIIG Serial Card and sio Message-ID: <6D5097D4B56AD31190D50008C7B1579B9120E3@EXLAN5>
next in thread | raw e-mail | index | archive | help
Hello all, I have a question about a SIIG I/O Expander 4S card I recently inherited. I installed it in my dedicated Internet router box (a Compaq Deskpro 4/66 with an external USR I-Modem, running FreeBSD 3.4 with "flags 0x20000" compiled into the kernel "sio" lines). I have the first port on the SIIG card set pro COM1 (port 3f8, IRQ 4) and the second port is disabled. Now comes the question part: Every time I try setting the card to 230400 baud the modem won't hook up through ppp. If i use minicom (a terminal program) to talk to the modem at 230400 the modem thinks i am at 19200. If I set minicom for 115200 (leaving the SIIG card at 230400) then the modem thinks I am at 230400!?! That would be fine with me if ppp worked like this but if I set ppp for 115200 and leave the SIIG card at 230400 the modem won't dial, or it won't detect carrier (take your pick). I have trolled the newsgroups and mailing lists looking for answers, and it looks like some of you out there are using this card, but I haven't been able to find anything specific to my problem. Any thoughts? Ian Cartwright Senior Engineer Raymond James & Associates icartwright@it.rjf.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?6D5097D4B56AD31190D50008C7B1579B9120E3>