From owner-freebsd-stable@FreeBSD.ORG Tue Jul 1 10:32:06 2008 Return-Path: Delivered-To: freebsd-stable@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 4109A1065686 for ; Tue, 1 Jul 2008 10:32:06 +0000 (UTC) (envelope-from beaker@hot.pl) Received: from v000052.home.net.pl (hot.pl [212.85.96.52]) by mx1.freebsd.org (Postfix) with SMTP id E737C8FC13 for ; Tue, 1 Jul 2008 10:32:04 +0000 (UTC) (envelope-from beaker@hot.pl) Received: from dyb186.internetdsl.tpnet.pl (HELO ?172.16.4.98?) (beaker.hot@home@83.14.53.186) by mail03.home.net.pl with SMTP; Tue, 1 Jul 2008 10:32:00 -0000 Message-ID: <486A07A4.1070406@hot.pl> Date: Tue, 01 Jul 2008 12:32:04 +0200 From: =?UTF-8?B?S3J6eXN6dG9mIErEmWRydWN6eWs=?= User-Agent: Thunderbird 2.0.0.14 (Windows/20080421) MIME-Version: 1.0 To: pyunyh@gmail.com References: <1052423937.20080630135423@hot.pl> <20080701004855.GF83626@cdnetworks.co.kr> In-Reply-To: <20080701004855.GF83626@cdnetworks.co.kr> Content-Type: text/plain; charset=UTF-8; format=flowed Content-Transfer-Encoding: 7bit Cc: freebsd-stable@freebsd.org Subject: Re: Marvell Yukon 88E8062 - media selection problem X-BeenThere: freebsd-stable@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: Production branch of FreeBSD source code List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 01 Jul 2008 10:32:06 -0000 Hi, Pyun YongHyeon wrote: > The 88E8062 support wasn't tested due to lack of hardware and I just > copied the device id from myk driver. Would you show me the output > of "devinfo -rv| grep oui" ? Also it would be better if I can see > verbosed boot message. > Here you go: # devinfo -rv | grep oui e1000phy0 pnpinfo oui=0x5043 model=0x9 rev=0x1 at phyno=0 e1000phy1 pnpinfo oui=0x5043 model=0x9 rev=0x1 at phyno=0 inphy0 pnpinfo oui=0xaa00 model=0x15 rev=0x4 at phyno=1 And dmesg with '-v' in boot.config and 'verbose_loading="YES"' in loader.conf: Copyright (c) 1992-2008 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 7.0-RELEASE-p2 #1: Mon Jun 30 20:03:47 CEST 2008 beaker@blade-1.ramfasto.com:/usr/obj/usr/src/sys/GENERIC Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff80bc8000. Calibrating clock(s) ... i8254 clock: 1193157 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 3600141768 Hz CPU: Intel(R) Xeon(TM) CPU 3.60GHz (3600.14-MHz K8-class CPU) Origin = "GenuineIntel" Id = 0xf4a Stepping = 10 Features=0xbfebfbff Features2=0x659d AMD Features=0x20100800 AMD Features2=0x1 Logical CPUs per core: 2 usable memory = 1059807232 (1010 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009bfff, 634880 bytes (155 pages) 0x0000000000cc5000 - 0x000000003e09ffff, 1027452928 bytes (250843 pages) avail memory = 1021194240 (973 MB) ACPI APIC Table: FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 APIC: CPU 0 has ACPI ID 0 APIC: CPU 1 has ACPI ID 1 ACPI: RSDP @ 0x0xf5df0/0x0014 (v 0 IntelR) ACPI: RSDT @ 0x0x3fee3040/0x0030 (v 1 IntelR AWRDACPI 0x42302E31 AWRD 0x00000000) ACPI: FACP @ 0x0x3fee30c0/0x0074 (v 1 IntelR AWRDACPI 0x42302E31 AWRD 0x00000000) ACPI: DSDT @ 0x0x3fee3180/0x3AB7 (v 1 INTELR AWRDACPI 0x00001000 MSFT 0x0100000E) ACPI: FACS @ 0x0x3fee0000/0x0040 ACPI: MCFG @ 0x0x3fee6d80/0x003C (v 1 IntelR AWRDACPI 0x42302E31 AWRD 0x00000000) ACPI: APIC @ 0x0x3fee6c80/0x0084 (v 1 IntelR AWRDACPI 0x42302E31 AWRD 0x00000000) MADT: Found IO APIC ID 4, Interrupt 0 at 0xfec00000 ioapic0: Changing APIC ID to 4 ioapic0: Routing external 8259A's -> intpin 0 MADT: Interrupt override: source 0, irq 2 ioapic0: Routing IRQ 0 -> intpin 2 MADT: Interrupt override: source 9, irq 9 ioapic0: intpin 9 trigger: level lapic0: Routing NMI -> LINT1 lapic0: LINT1 trigger: edge lapic0: LINT1 polarity: high lapic1: Routing NMI -> LINT1 lapic1: LINT1 trigger: edge lapic1: LINT1 polarity: high MADT: Ignoring local NMI routed to ACPI CPU 2 MADT: Ignoring local NMI routed to ACPI CPU 3 ioapic0 irqs 0-23 on motherboard cpu0 BSP: ID: 0x00000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000 ath_rate: version 1.2 wlan_amrr: wlan: <802.11 Link Layer> null: random: nfslock: pseudo-device kbd: new array size 4 kbd1 at kbdmux0 mem: io: ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) hptrr: HPT RocketRAID controller driver v1.1 (Jun 30 2008 20:01:01) acpi0: on motherboard ioapic0: routing intpin 9 (ISA IRQ 9) to vector 48 acpi0: [MPSAFE] acpi0: [ITHREAD] acpi0: Power Button (fixed) AcpiOsDerivePciId: \\_SB_.PCI0.PX40.PIRQ -> bus 0 dev 31 func 0 AcpiOsDerivePciId: \\_SB_.PCI0.PX40.PIR2 -> bus 0 dev 31 func 0 acpi0: reservation of 0, a0000 (3) failed acpi0: reservation of 100000, 3fde0000 (3) failed ACPI timer: 1/0 1/0 1/0 1/0 1/0 1/0 1/0 1/0 1/0 1/0 -> 10 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 pci_link0: Index IRQ Rtd Ref IRQs Initial Probe 0 15 N 0 3 4 5 6 7 9 10 11 12 14 15 Validation 0 15 N 0 3 4 5 6 7 9 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15 pci_link1: Index IRQ Rtd Ref IRQs Initial Probe 0 9 N 0 3 4 5 6 7 9 10 11 12 14 15 Validation 0 9 N 0 3 4 5 6 7 9 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15 pci_link2: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 3 4 5 6 7 9 10 11 12 14 15 Validation 0 11 N 0 3 4 5 6 7 9 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15 pci_link3: Index IRQ Rtd Ref IRQs Initial Probe 0 5 N 0 3 4 5 6 7 9 10 11 12 14 15 Validation 0 5 N 0 3 4 5 6 7 9 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15 pci_link4: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15 Validation 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15 pci_link5: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15 Validation 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15 pci_link6: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15 Validation 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15 pci_link7: Index IRQ Rtd Ref IRQs Initial Probe 0 10 N 0 3 4 5 6 7 9 10 11 12 14 15 Validation 0 10 N 0 3 4 5 6 7 9 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15 cpu0: on acpi0 cpu0: switching to generic Cx mode est0: enabling SpeedStep est0: on cpu0 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 122d0000122d device_attach: est0 attach returned 6 p4tcc0: on cpu0 cpu1: on acpi0 est1: on cpu1 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 122d0000122d device_attach: est1 attach returned 6 p4tcc1: on cpu1 acpi_button0: on acpi0 pcib0: port 0xcf8-0xcff on acpi0 pci0: on pcib0 pci0: domain=0, physical bus=0 found-> vendor=0x8086, dev=0x3590, revid=0x0c domain=0, bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0106, statreg=0x0090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x3591, revid=0x0c domain=0, bus=0, slot=0, func=1 class=ff-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x3594, revid=0x0c domain=0, bus=0, slot=1, func=0 class=08-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0002, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 MSI supports 2 messages map[10]: type Memory, range 32, base 0xd8200000, size 12, enabled found-> vendor=0x8086, dev=0x3595, revid=0x0c domain=0, bus=0, slot=2, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x4018, cachelnsz=8 (dwords) lattimer=0x00 (0 ns), mingnt=0x06 (1500 ns), maxlat=0x00 (0 ns) intpin=a, irq=15 powerspec 2 supports D0 D3 current D0 MSI supports 2 messages pcib0: matched entry for 0.2.INTA pcib0: slot 2 INTA hardwired to IRQ 16 found-> vendor=0x8086, dev=0x3596, revid=0x0c domain=0, bus=0, slot=3, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x4018, cachelnsz=8 (dwords) lattimer=0x00 (0 ns), mingnt=0x06 (1500 ns), maxlat=0x00 (0 ns) intpin=a, irq=15 powerspec 2 supports D0 D3 current D0 MSI supports 2 messages pcib0: matched entry for 0.3.INTA pcib0: slot 3 INTA hardwired to IRQ 16 found-> vendor=0x8086, dev=0x3597, revid=0x0c domain=0, bus=0, slot=4, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x0010, cachelnsz=8 (dwords) lattimer=0x00 (0 ns), mingnt=0x06 (1500 ns), maxlat=0x00 (0 ns) intpin=a, irq=15 powerspec 2 supports D0 D3 current D0 MSI supports 2 messages pcib0: matched entry for 0.4.INTA pcib0: slot 4 INTA hardwired to IRQ 16 found-> vendor=0x8086, dev=0x3598, revid=0x0c domain=0, bus=0, slot=5, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x4018, cachelnsz=8 (dwords) lattimer=0x00 (0 ns), mingnt=0x06 (1500 ns), maxlat=0x00 (0 ns) intpin=a, irq=15 powerspec 2 supports D0 D3 current D0 MSI supports 2 messages pcib0: matched entry for 0.5.INTA pcib0: slot 5 INTA hardwired to IRQ 16 found-> vendor=0x8086, dev=0x3599, revid=0x0c domain=0, bus=0, slot=6, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x4018, cachelnsz=8 (dwords) lattimer=0x00 (0 ns), mingnt=0x06 (1500 ns), maxlat=0x00 (0 ns) intpin=a, irq=15 powerspec 2 supports D0 D3 current D0 MSI supports 2 messages pcib0: matched entry for 0.6.INTA pcib0: slot 6 INTA hardwired to IRQ 16 found-> vendor=0x8086, dev=0x359a, revid=0x0c domain=0, bus=0, slot=7, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x4018, cachelnsz=8 (dwords) lattimer=0x00 (0 ns), mingnt=0x06 (1500 ns), maxlat=0x00 (0 ns) intpin=a, irq=15 powerspec 2 supports D0 D3 current D0 MSI supports 2 messages pcib0: matched entry for 0.7.INTA pcib0: slot 7 INTA hardwired to IRQ 16 found-> vendor=0x8086, dev=0x24c2, revid=0x02 domain=0, bus=0, slot=29, func=0 class=0c-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=15 map[20]: type I/O Port, range 32, base 0xd800, size 5, enabled pcib0: matched entry for 0.29.INTA pcib0: slot 29 INTA hardwired to IRQ 16 found-> vendor=0x8086, dev=0x24c4, revid=0x02 domain=0, bus=0, slot=29, func=1 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=5 map[20]: type I/O Port, range 32, base 0xd000, size 5, enabled pcib0: matched entry for 0.29.INTB pcib0: slot 29 INTB hardwired to IRQ 19 found-> vendor=0x8086, dev=0x24c7, revid=0x02 domain=0, bus=0, slot=29, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=11 map[20]: type I/O Port, range 32, base 0xd400, size 5, enabled pcib0: matched entry for 0.29.INTC pcib0: slot 29 INTC hardwired to IRQ 18 found-> vendor=0x8086, dev=0x24cd, revid=0x02 domain=0, bus=0, slot=29, func=7 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=d, irq=10 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xd8201000, size 10, enabled pcib0: matched entry for 0.29.INTD pcib0: slot 29 INTD hardwired to IRQ 23 found-> vendor=0x8086, dev=0x244e, revid=0x82 domain=0, bus=0, slot=30, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x0080, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x0e (3500 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x24c0, revid=0x02 domain=0, bus=0, slot=31, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x000f, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x24cb, revid=0x02 domain=0, bus=0, slot=31, func=1 class=01-01-8a, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 map[20]: type I/O Port, range 32, base 0xf000, size 4, enabled map[24]: type Memory, range 32, base 0, size 10, enabled found-> vendor=0x8086, dev=0x24c3, revid=0x02 domain=0, bus=0, slot=31, func=3 class=0c-05-00, hdrtype=0x00, mfdev=0 cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=9 map[20]: type I/O Port, range 32, base 0x500, size 5, enabled pcib0: matched entry for 0.31.INTB pcib0: slot 31 INTB hardwired to IRQ 17 pci0: at device 0.1 (no driver attached) pci0: at device 1.0 (no driver attached) pcib1: irq 16 at device 2.0 on pci0 pcib1: domain 0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0xf000-0xfff pcib1: no prefetched decode pci1: on pcib1 pci1: domain=0, physical bus=1 pcib2: irq 16 at device 3.0 on pci0 pcib2: domain 0 pcib2: secondary bus 2 pcib2: subordinate bus 2 pcib2: I/O decode 0xf000-0xfff pcib2: no prefetched decode pci2: on pcib2 pci2: domain=0, physical bus=2 pcib3: irq 16 at device 4.0 on pci0 pcib3: domain 0 pcib3: secondary bus 3 pcib3: subordinate bus 3 pcib3: I/O decode 0xb000-0xbfff pcib3: memory decode 0xd8100000-0xd81fffff pcib3: no prefetched decode pci3: on pcib3 pci3: domain=0, physical bus=3 found-> vendor=0x11ab, dev=0x4347, revid=0x14 domain=0, bus=3, slot=0, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=15 powerspec 2 supports D0 D1 D2 D3 current D0 MSI supports 2 messages, 64 bit map[10]: type Memory, range 64, base 0xd8120000, size 14, enabled pcib3: requested memory range 0xd8120000-0xd8123fff: good map[18]: type I/O Port, range 32, base 0xb000, size 8, enabled pcib3: requested I/O range 0xb000-0xb0ff: in range pcib0: matched entry for 0.4.INTA pcib0: slot 4 INTA hardwired to IRQ 16 pcib3: slot 0 INTA is routed to irq 16 mskc0: port 0xb000-0xb0ff mem 0xd8120000-0xd8123fff irq 16 at device 0.0 on pci3 mskc0: Reserved 0x4000 bytes for rid 0x10 type 3 at 0xd8120000 mskc0: MSI count : 2 mskc0: RAM buffer size : 96KB mskc0: Port 0 : Rx Queue 70KB(0x00000000:0x000117ff) mskc0: Port 0 : Tx Queue 26KB(0x00011800:0x00017fff) mskc0: Port 1 : Rx Queue 70KB(0x00018000:0x000297ff) mskc0: Port 1 : Tx Queue 26KB(0x00029800:0x0002ffff) msk0: on mskc0 msk0: bpf attached msk0: Ethernet address: 00:10:f3:0d:d6:45 miibus0: on msk0 e1000phy0: PHY 0 on miibus0 e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto msk1: on mskc0 msk1: bpf attached msk1: Ethernet address: 00:10:f3:0d:d6:46 miibus1: on msk1 e1000phy1: PHY 0 on miibus1 e1000phy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto ioapic0: routing intpin 16 (PCI IRQ 16) to vector 49 mskc0: [MPSAFE] mskc0: [FILTER] pcib4: irq 16 at device 5.0 on pci0 pcib4: domain 0 pcib4: secondary bus 4 pcib4: subordinate bus 4 pcib4: I/O decode 0xf000-0xfff pcib4: no prefetched decode pci4: on pcib4 pci4: domain=0, physical bus=4 pcib5: irq 16 at device 6.0 on pci0 pcib5: domain 0 pcib5: secondary bus 5 pcib5: subordinate bus 5 pcib5: I/O decode 0xf000-0xfff pcib5: no prefetched decode pcib5: could not get PCI interrupt routing table for \\_SB_.PCI0.P1AB - AE_NOT_FOUND pci5: on pcib5 pci5: domain=0, physical bus=5 pcib6: irq 16 at device 7.0 on pci0 pcib6: domain 0 pcib6: secondary bus 6 pcib6: subordinate bus 6 pcib6: I/O decode 0xf000-0xfff pcib6: no prefetched decode pci6: on pcib6 pci6: domain=0, physical bus=6 uhci0: port 0xd800-0xd81f irq 16 at device 29.0 on pci0 uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xd800 uhci0: [GIANT-LOCKED] uhci0: [ITHREAD] usb0: on uhci0 usb0: USB revision 1.0 uhub0: on usb0 uhub0: 2 ports with 2 removable, self powered uhci1: port 0xd000-0xd01f irq 19 at device 29.1 on pci0 uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0xd000 ioapic0: routing intpin 19 (PCI IRQ 19) to vector 50 uhci1: [GIANT-LOCKED] uhci1: [ITHREAD] usb1: on uhci1 usb1: USB revision 1.0 uhub1: on usb1 uhub1: 2 ports with 2 removable, self powered uhci2: port 0xd400-0xd41f irq 18 at device 29.2 on pci0 uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0xd400 ioapic0: routing intpin 18 (PCI IRQ 18) to vector 51 uhci2: [GIANT-LOCKED] uhci2: [ITHREAD] usb2: on uhci2 usb2: USB revision 1.0 uhub2: on usb2 uhub2: 2 ports with 2 removable, self powered ehci0: mem 0xd8201000-0xd82013ff irq 23 at device 29.7 on pci0 ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0xd8201000 ioapic0: routing intpin 23 (PCI IRQ 23) to vector 52 ehci0: [GIANT-LOCKED] ehci0: [ITHREAD] usb3: EHCI version 1.0 usb3: companion controllers, 2 ports each: usb0 usb1 usb2 usb3: on ehci0 usb3: USB revision 2.0 uhub3: on usb3 uhub3: 6 ports with 6 removable, self powered pcib7: at device 30.0 on pci0 pcib7: domain 0 pcib7: secondary bus 7 pcib7: subordinate bus 7 pcib7: I/O decode 0xc000-0xcfff pcib7: memory decode 0xd8000000-0xd80fffff pcib7: prefetched decode 0xd0000000-0xd7ffffff pcib7: Subtractively decoded bridge. pci7: on pcib7 pci7: domain=0, physical bus=7 found-> vendor=0x8086, dev=0x1229, revid=0x10 domain=0, bus=7, slot=0, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0290, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x08 (2000 ns), maxlat=0x38 (14000 ns) intpin=a, irq=15 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0xd8050000, size 12, enabled pcib7: requested memory range 0xd8050000-0xd8050fff: good map[14]: type I/O Port, range 32, base 0xc000, size 6, enabled pcib7: requested I/O range 0xc000-0xc03f: in range map[18]: type Memory, range 32, base 0xd8000000, size 17, enabled pcib7: requested memory range 0xd8000000-0xd801ffff: good pcib7: matched entry for 7.0.INTA pcib7: slot 0 INTA hardwired to IRQ 16 found-> vendor=0x1002, dev=0x515e, revid=0x02 domain=0, bus=7, slot=2, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0087, statreg=0x0290, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Prefetchable Memory, range 32, base 0xd0000000, size 27, enabled pcib7: requested memory range 0xd0000000-0xd7ffffff: good map[14]: type I/O Port, range 32, base 0xc400, size 8, enabled pcib7: requested I/O range 0xc400-0xc4ff: in range map[18]: type Memory, range 32, base 0xd8040000, size 16, enabled pcib7: requested memory range 0xd8040000-0xd804ffff: good pcib7: matched entry for 7.2.INTA pcib7: slot 2 INTA hardwired to IRQ 18 fxp0: port 0xc000-0xc03f mem 0xd8050000-0xd8050fff,0xd8000000-0xd801ffff irq 16 at device 0.0 on pci7 fxp0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xd8050000 fxp0: using memory space register mapping fxp0: PCI IDs: 8086 1229 8086 0000 0010 fxp0: Dynamic Standby mode is disabled miibus2: on fxp0 inphy0: PHY 1 on miibus2 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp0: bpf attached fxp0: Ethernet address: 00:10:f3:0d:d6:47 fxp0: [MPSAFE] fxp0: [ITHREAD] vgapci0: port 0xc400-0xc4ff mem 0xd0000000-0xd7ffffff,0xd8040000-0xd804ffff irq 18 at device 2.0 on pci7 isab0: at device 31.0 on pci0 isa0: on isab0 atapci0: port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f at device 31.1 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xf000 ata0: on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=03 ostat0=50 ostat1=00 ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 ata0: stat1=0x00 err=0x01 lsb=0x00 msb=0x00 ata0: reset tp2 stat0=50 stat1=00 devices=0x1 ioapic0: routing intpin 14 (ISA IRQ 14) to vector 53 ata0: [MPSAFE] ata0: [ITHREAD] ata1: on atapci0 atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 ata1: reset tp1 mask=03 ostat0=00 ostat1=00 ata1: stat0=0x01 err=0x01 lsb=0x01 msb=0x01 ata1: stat1=0x01 err=0x01 lsb=0x01 msb=0x01 ata1: reset tp2 stat0=01 stat1=01 devices=0x0 ioapic0: routing intpin 15 (ISA IRQ 15) to vector 54 ata1: [MPSAFE] ata1: [ITHREAD] pci0: at device 31.3 (no driver attached) sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: irq maps: 0 0 0 0 sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: irq maps: 0 0 0 0 sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A ioapic0: routing intpin 4 (ISA IRQ 4) to vector 55 sio0: [FILTER] sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled sio1: irq maps: 0 0 0 0 sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled sio1: irq maps: 0 0 0 0 sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A ioapic0: routing intpin 3 (ISA IRQ 3) to vector 56 sio1: [FILTER] ppc0: using extended I/O port range ppc0: SPP ppc0: port 0x378-0x37f,0x778-0x77b irq 7 on acpi0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode ppbus0: on ppc0 ioapic0: routing intpin 7 (ISA IRQ 7) to vector 57 ppbus0: [MPSAFE] ppbus0: [ITHREAD] plip0: on ppbus0 plip0: bpf attached lpt0: on ppbus0 lpt0: Interrupt-driven port ppi0: on ppbus0 ppc0: [GIANT-LOCKED] ppc0: [ITHREAD] psmcpnp0: irq 12 on acpi0 atkbdc0: port 0x60,0x64 irq 1 on acpi0 atkbd0: irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0047 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 ioapic0: routing intpin 1 (ISA IRQ 1) to vector 58 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] psm0: current command byte:0047 psm0: irq 12 on atkbdc0 ioapic0: routing intpin 12 (ISA IRQ 12) to vector 59 psm0: [GIANT-LOCKED] psm0: [ITHREAD] psm0: model IntelliMouse, device ID 3-00, 3 buttons psm0: config:00000000, flags:00000008, packet size:4 psm0: syncmask:08, syncbits:00 ahc_isa_probe 0: ioport 0xc00 alloc failed ex_isa_identify() atkbdc: atkbdc0 already exists; skipping it ppc: ppc0 already exists; skipping it sio: sio0 already exists; skipping it sio: sio1 already exists; skipping it sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices orm0: at iomem 0xc0000-0xc8fff,0xcc000-0xcd7ff on isa0 fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd1, terminal emulator: sc (syscons terminal) sio2: not probed (disabled) sio3: not probed (disabled) vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 isa_probe_children: probing PnP devices Device configuration finished. procfs registered lapic: Divisor 2, Frequency 100003932 hz Timecounter "TSC" frequency 3600141768 Hz quality -100 Timecounters tick every 1.000 msec lo0: bpf attached hptrr: no controller detected. ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=80 wire ad0: setting PIO4 on ICH4 chip ad0: DMA limited to UDMA33, controller found non-ATA66 cable ad0: setting UDMA33 on ICH4 chip ad0: 238475MB at ata0-master UDMA33 ad0: 488397168 sectors [484521C/16H/63S] 16 sectors/interrupt 1 depth queue GEOM: new disk ad0 ad0: Intel check1 failed ad0: Adaptec check1 failed ad0: LSI (v3) check1 failed ad0: LSI (v2) check1 failed ad0: FreeBSD check1 failed ATA PseudoRAID loaded SMP: AP CPU #1 Launched! cpu1 AP: ID: 0x01000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000 Trying to mount root from ufs:/dev/ad0s1a start_init: trying /sbin/init