Date: Thu, 16 May 2019 10:43:32 +0200 From: Niclas Zeising <zeising+freebsd@daemonic.se> To: Milan Obuch <freebsd-hackers@dino.sk>, freebsd-hackers@freebsd.org Subject: Re: Any WAFER-BT users? Message-ID: <3ee95478-aa31-450e-efdd-daa500de6032@daemonic.se> In-Reply-To: <20190516101921.7bfa267e@zeta.dino.sk> References: <20190409103256.5d095bb5@zeta.dino.sk> <CANCZdfr0sZe6x25LWKxx_kcs=PbtW-G4wZz6JJ_fGXjXRki=XA@mail.gmail.com> <20190415143849.0f09eb91@zeta.dino.sk> <alpine.BSF.2.20.1904151818590.82358@puchar.net> <20190415210235.75bc4165@zeta.dino.sk> <alpine.BSF.2.20.1904160850250.91844@puchar.net> <20190416092724.242e93d3@zeta.dino.sk> <20190507095210.66681691@zeta.dino.sk> <20190516101921.7bfa267e@zeta.dino.sk>
next in thread | previous in thread | raw e-mail | index | archive | help
On 2019-05-16 10:19, Milan Obuch wrote: > On Tue, 7 May 2019 09:52:10 +0200 > Milan Obuch <freebsd-hackers@dino.sk> wrote: > >> On Tue, 16 Apr 2019 09:27:24 +0200 >> Milan Obuch <freebsd-hackers@dino.sk> wrote: >> > > [ snip ] > >> >> So after some time and testing I'm back here. >> >> I have freshly built r347177 and no change, i. e. loader works with >> USB keyboard and VGA, after starting kernel output switches to serial >> port, giving just >> >> VT: init without driver. >> >> However, adding >> >> kern.vty=sc >> >> into /boot/loader.conf changes things and video console works again. >> So I think probably problem is in vt_vga module not recognising >> CPU/VGA in >> >> CPU: Intel(R) Celeron(R) CPU N2807 @ 1.58GHz (1583.38-MHz 686-class >> CPU) >> >> (I think it is integrated here), even if it is probed later (dmesg >> shows >> >> vgapci0: <VGA-compatible display> port 0xe080-0xe087 mem >> 0xd0000000-0xd03fffff,0xc0000000-0xcfffffff irq 16 at device 2.0 on >> pci0 vgapci0: Boot video device >> >> and this assignment is seen in pciconf output too, so device is >> somehow detected). >> > > I found another way to enable VGA - adding line > > hw.vga.acpi_ignore_no_vga=1 > > into /boot/loader.conf made kernel to use VGA and keyboard as console > with vt. It works with installation media as well, i. e. GENERIC kernel. > I am not yet able to use VGA with X with FullHD resolution. I can use X > with vesa video only, which makes maximum resolution 1024x768. > > Just to share my finding... > Hi! Just a wild guess here, perhaps something isn't setting up the framebuffer used for UEFI correctly? With regards to X, try installing drm-kmod and follow the instructions, that should give you accelerated video (granted that it's a build in intel graphics card, and that it's supported). Regards -- Niclas
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3ee95478-aa31-450e-efdd-daa500de6032>