Date: Thu, 12 Jul 2007 11:19:12 +0100 From: Thomas Sparrevohn <Thomas.Sparrevohn@btinternet.com> To: freebsd-acpi@freebsd.org Subject: Re: (no subject) Message-ID: <200707121119.12670.Thomas.Sparrevohn@btinternet.com> In-Reply-To: <82CDCEB3-E236-40FC-929A-410CD73A90C8@uos.de> References: <82CDCEB3-E236-40FC-929A-410CD73A90C8@uos.de>
next in thread | previous in thread | raw e-mail | index | archive | help
On Wednesday 11 July 2007 20:04:24 Ivaylo Mateev wrote: > , > > I have some Problems when I power off or reboot my Computer. > > It doesn't matter if I do "reboot", "halt", "shutdown -p now". The > Computer stay on > with the Message: > All Bufferes synced > Uptime XXXXXXXX > > Everything seems to be O.K. but it just wont power off or reboot > > Some info: > > ---------------- > uname -a: > > FreeBSD heavymetal 6.2-STABLE FreeBSD 6.2-STABLE #4: Tue Jul 10 > 14:46:47 CEST 2007 root@:/usr/obj/usr/src/sys/HEAVYMETAL i386 > > ------------------ I think it is due to the USB - Could you try to boot without USB? - I found that it something to do with usb.ko - e.g the ohci or ehci driver - but I have not had time to debug it further > > ------------------- > [strato@heavymetal ~]$ sudo sysctl hw.acpi > hw.acpi.supported_sleep_state: S3 S4 S5 > hw.acpi.power_button_state: S5 > hw.acpi.sleep_button_state: S3 > hw.acpi.lid_switch_state: NONE > hw.acpi.standby_state: S1 > hw.acpi.suspend_state: S3 > hw.acpi.sleep_delay: 1 > hw.acpi.s4bios: 0 > hw.acpi.verbose: 0 > hw.acpi.disable_on_reboot: 0 > hw.acpi.handle_reboot: 0 > hw.acpi.reset_video: 0 > hw.acpi.cpu.cx_lowest: C1 > hw.acpi.thermal.min_runtime: 0 > hw.acpi.thermal.polling_rate: 10 > hw.acpi.thermal.user_override: 0 > hw.acpi.thermal.tz0.temperature: 48.0C > hw.acpi.thermal.tz0.active: -1 > hw.acpi.thermal.tz0.passive_cooling: 1 > hw.acpi.thermal.tz0.thermal_flags: 0 > hw.acpi.thermal.tz0._PSV: 80.0C > hw.acpi.thermal.tz0._HOT: -1 > hw.acpi.thermal.tz0._CRT: 90.0C > hw.acpi.thermal.tz0._ACx: 80.0C -1 -1 -1 -1 -1 -1 -1 -1 -1 > [strato@heavymetal ~]$ > ------------------- > > ----------------------- > hier dmesg > > Copyright (c) 1992-2007 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. > FreeBSD is a registered trademark of The FreeBSD Foundation. > FreeBSD 6.2-STABLE #4: Tue Jul 10 14:46:47 CEST 2007 > root@:/usr/obj/usr/src/sys/HEAVYMETAL > ACPI APIC Table: <Nvidia AWRDACPI> > Timecounter "i8254" frequency 1193182 Hz quality 0 > CPU: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ (2375.02-MHz 686- > class CPU) > Origin = "AuthenticAMD" Id = 0x40fb2 Stepping = 2 > > Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE > ,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> > Features2=0x2001<SSE3,CX16> > AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow+,3DNow> > AMD Features2=0x1f<LAHF,CMP,<b2>,<b3>,CR8> > Cores per package: 2 > real memory = 804192256 (766 MB) > avail memory = 769056768 (733 MB) > FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs > cpu0 (BSP): APIC ID: 0 > cpu1 (AP): APIC ID: 1 > ioapic0: Changing APIC ID to 2 > ioapic0 <Version 1.1> irqs 0-23 on motherboard > kbd1 at kbdmux0 > acpi0: <Nvidia AWRDACPI> on motherboard > acpi_hpet0: <High Precision Event Timer> iomem 0xfeff0000-0xfeff03ff > on acpi0 > Timecounter "HPET" frequency 25000000 Hz quality 2000 > acpi0: Power Button (fixed) > acpi0: reservation of feff0000, 100 (3) failed > Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 > acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 > cpu0: <ACPI CPU> on acpi0 > cpu1: <ACPI CPU> on acpi0 > acpi_button0: <Power Button> on acpi0 > pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 > pci0: <ACPI PCI bus> on pcib0 > pci0: <memory, RAM> at device 0.0 (no driver attached) > isab0: <PCI-ISA bridge> at device 1.0 on pci0 > isa0: <ISA bus> on isab0 > pci0: <serial bus, SMBus> at device 1.1 (no driver attached) > pci0: <memory, RAM> at device 1.2 (no driver attached) > ohci0: <OHCI (generic) USB controller> mem 0xfe02f000-0xfe02ffff irq > 21 at device 2.0 on pci0 > ohci0: [GIANT-LOCKED] > usb0: OHCI version 1.0, legacy support > usb0: <OHCI (generic) USB controller> on ohci0 > usb0: USB revision 1.0 > uhub0: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub0: 5 ports with 5 removable, self powered > ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfe02e000-0xfe02e0ff > irq 22 at device 2.1 on pci0 > ehci0: [GIANT-LOCKED] > usb1: EHCI version 1.0 > usb1: companion controller, 12 ports each: usb0 > usb1: <EHCI (generic) USB 2.0 controller> on ehci0 > usb1: USB revision 2.0 > uhub1: nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 > uhub1: 5 ports with 5 removable, self powered > ohci1: <OHCI (generic) USB controller> mem 0xfe02d000-0xfe02dfff irq > 23 at device 4.0 on pci0 > ohci1: [GIANT-LOCKED] > usb2: OHCI version 1.0, legacy support > usb2: <OHCI (generic) USB controller> on ohci1 > usb2: USB revision 1.0 > uhub2: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub2: 5 ports with 5 removable, self powered > ehci1: <EHCI (generic) USB 2.0 controller> mem 0xfe02c000-0xfe02c0ff > irq 20 at device 4.1 on pci0 > ehci1: [GIANT-LOCKED] > usb3: EHCI version 1.0 > usb3: companion controller, 12 ports each: usb2 > usb3: <EHCI (generic) USB 2.0 controller> on ehci1 > usb3: USB revision 2.0 > uhub3: nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 > uhub3: 5 ports with 5 removable, self powered > atapci0: <GENERIC ATA controller> port > 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f at device 6.0 on pci0 > ata0: <ATA channel 0> on atapci0 > ata1: <ATA channel 1> on atapci0 > pcm0: <NVidia (Unknown) High Definition Audio Controller> mem > 0xfe020000-0xfe023fff irq 21 at device 7.0 on pci0 > pcib1: <ACPI PCI-PCI bridge> at device 8.0 on pci0 > pci1: <ACPI PCI bus> on pcib1 > atapci1: <GENERIC ATA controller> port > 0x9f0-0x9f7,0xbf0-0xbf3,0x970-0x977,0xb70-0xb73,0xdc00-0xdc0f mem > 0xfe026000-0xfe027fff irq 22 at device 9.0 on pci0 > ata2: <ATA channel 0> on atapci1 > ata3: <ATA channel 1> on atapci1 > nfe0: <NVIDIA nForce MCP67 Networking Adapter> port 0xd800-0xd807 mem > 0xfe02b000-0xfe02bfff,0xfe02a000-0xfe02a0ff,0xfe029000-0xfe02900f irq > 23 at device 10.0 on pci0 > miibus0: <MII bus> on nfe0 > e1000phy0: <Marvell 88E1116 Gigabit PHY> on miibus0 > e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, > 1000baseTX-FDX, auto > nfe0: Ethernet address: 00:50:8d:9f:27:19 > nfe0: [FAST] > pcib2: <ACPI PCI-PCI bridge> at device 11.0 on pci0 > pci2: <ACPI PCI bus> on pcib2 > pcib3: <ACPI PCI-PCI bridge> at device 12.0 on pci0 > pci3: <ACPI PCI bus> on pcib3 > pcib4: <ACPI PCI-PCI bridge> at device 13.0 on pci0 > pci4: <ACPI PCI bus> on pcib4 > pcib5: <ACPI PCI-PCI bridge> at device 14.0 on pci0 > pci5: <ACPI PCI bus> on pcib5 > pcib6: <ACPI PCI-PCI bridge> at device 15.0 on pci0 > pci6: <ACPI PCI bus> on pcib6 > pcib7: <ACPI PCI-PCI bridge> at device 16.0 on pci0 > pci7: <ACPI PCI bus> on pcib7 > pcib8: <ACPI PCI-PCI bridge> at device 17.0 on pci0 > pci8: <ACPI PCI bus> on pcib8 > nvidia0: <GeForce 7025 / NVIDIA nForce 630a> mem > 0xfb000000-0xfbffffff,0xe0000000-0xefffffff,0xfc000000-0xfcffffff irq > 20 at device 18.0 on pci0 > nvidia0: [GIANT-LOCKED] > acpi_tz0: <Thermal Zone> on acpi0 > atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 > atkbd0: <AT Keyboard> irq 1 on atkbdc0 > kbd0 at atkbd0 > atkbd0: [GIANT-LOCKED] > pmtimer0 on isa0 > sc0: <System console> at flags 0x100 on isa0 > sc0: VGA <16 virtual consoles, flags=0x300> > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on > isa0 > sio0: configured irq 4 not in bitmap of probed irqs 0 > sio0: port may not be enabled > sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 > sio0: type 8250 or not responding > sio1: configured irq 3 not in bitmap of probed irqs 0 > sio1: port may not be enabled > Timecounters tick every 1.000 msec > acd0: DVDROM <TEAC DV-516GA/G4S3> at ata0-master UDMA33 > ad7: 152627MB <SAMSUNG HD161HJ JF100-15> at ata3-slave UDMA33 > pcm0: <HDA Codec: Realtek ALC888> > pcm0: <HDA Driver Revision: 20070619_0045> > SMP: AP CPU #1 Launched! > Trying to mount root from ufs:/dev/ad7s1a > ums0: Logitech Optical USB Mouse, rev 2.00/3.40, addr 2, iclass 3/1 > ums0: 3 buttons and Z dir. > umass0: USBest Technology USB Mass Storage Device, rev 2.00/1.00, addr 2 > da0 at umass-sim0 bus 0 target 0 lun 0 > da0: <JetFlash TS1GJFV10 0.00> Removable Direct Access SCSI-2 device > da0: 40.000MB/s transfers > da0: 983MB (2015231 512 byte sectors: 64H 32S/T 983C) > > --------------------------- > > Thanx for the help > > Ivo > > _______________________________________________ > freebsd-acpi@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-acpi > To unsubscribe, send any mail to "freebsd-acpi-unsubscribe@freebsd.org" >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200707121119.12670.Thomas.Sparrevohn>