Date: Wed, 5 Nov 2003 11:23:23 +0100 (CET) From: Harti Brandt <brandt@fokus.fraunhofer.de> To: John Baldwin <jhb@FreeBSD.org> Cc: current@FreeBSD.org Subject: RE: New interrupt stuff breaks ASUS 2 CPU system Message-ID: <20031105110813.J72398@beagle.fokus.fraunhofer.de> In-Reply-To: <XFMail.20031104130232.jhb@FreeBSD.org> References: <XFMail.20031104130232.jhb@FreeBSD.org>
next in thread | previous in thread | raw e-mail | index | archive | help
[-- Attachment #1 --] On Tue, 4 Nov 2003, John Baldwin wrote: JB> JB>On 04-Nov-2003 Harti Brandt wrote: JB>> On Tue, 4 Nov 2003, Harti Brandt wrote: JB>> JB>> HB>On Tue, 4 Nov 2003, John Baldwin wrote: JB>> HB> JB>> HB>JB> JB>> HB>JB>On 04-Nov-2003 Harti Brandt wrote: JB>> HB>JB>> JB>> HB>JB>> Hi, JB>> HB>JB>> JB>> HB>JB>> I have an ASUS system with 2 CPUs that I need to run at HZ=10000. This JB>> HB>JB>> worked until yesterday, but with the new interrupt code it doesn't boot JB>> HB>JB>> anymore. It works for the standard HZ, but if I set HZ=1000 I get a double JB>> HB>JB>> fault. I suspect a race condition in the interrupt handling. My config JB>> HB>JB>> file has JB>> HB>JB>> JB>> HB>JB>> options SMP JB>> HB>JB>> device apic JB>> HB>JB>> options HZ=1000 JB>> HB>JB> JB>> HB>JB>Ok, I can try to reproduce. JB>> HB>JB> JB>> HB>JB>> Device configuration finished. JB>> HB>JB>> Timecounter "TSC" frequency 1380009492 Hz quality -100 JB>> HB>JB>> Timecounters cpuid = 0; apic id = 00 JB>> HB>JB>> instruction pointer = 0x8:0xc048995d JB>> HB>JB>> stack pointer = 0x10:0xc0821bf4 JB>> HB>JB>> frame pointer cpuid = 0; apic id = 00 JB>> HB>JB>> JB>> HB>JB>> 0xc048995d is in critical_exit. It is the jmp after the popf from JB>> HB>JB>> cpu_critical_exit. JB>> HB>JB> JB>> HB>JB>This is where interrupts are re-enabled, so you are getting an interrupt. JB>> HB>JB>It might be helpful to figure what type of fault you are actually getting. JB>> HB> JB>> HB>tf_err is 0, tf_trapno is 30 (decimal). JB>> JB>> More information: JB>> JB>> I have replaced all the reserved vectors with individual ones, that set JB>> tf_err to the index (vector number). It appears the the vector number is JB>> 39 decimal. What does that mean? JB> JB>IRQ 7. JB>Can you post a verbose dmesg? Also, can you try both with and without JB>ACPI? Attached are both dmesgs. More datapoints: I had the parallel port (irq7) and the second sio disabled in the BIOS. After enabling both I now get a panic in lapic_handle_intr: Couldn't get vector from ISR! After fetching the relevant docs from intel I checked the registers of the apic pointed to by lapic. The interrupt taken is Xapic_irq1. isr1 is zero, but irr1 is 0x100 (that was without ACPI). How may that happen? As I understand ISR are the interrupts that have been delivered to the CPU so if it is interrupted a bit should be set, correct? I then have replaced the panic by a printf() followed by a return. Now the system comes to live, but I get a couple of these warnings. When the system is idle everyting seems fine, but when I start my simulation application (which normally generates between 20k and 250k interrupts/sec depending on the MPSAFE setting of the ATM drivers) I get approx 1-2 of these messages per second (this is with HZ=1000). A question while reading the code: what does the global lapic variable refer to? As I understand every CPU has its local APIC. Does it point to one of those two? To which? Regards, harti -- harti brandt, http://www.fokus.fraunhofer.de/research/cc/cats/employees/hartmut.brandt/private brandt@fokus.fraunhofer.de, harti@freebsd.org [-- Attachment #2 --] 00 0f 08 00 00 00 00 00 10 0e 00 ff vt0: not probed (disabled) isa_probe_children: probing PnP devices unknown: <PNP0401> can't assign resources (port) unknown: <PNP0401> at port 0x378-0x37f on isa0 unknown: <PNP0501> can't assign resources (port) unknown: <PNP0501> at port 0x3f8-0x3ff on isa0 unknown: <PNP0501> can't assign resources (port) unknown: <PNP0501> at port 0x2f8-0x2ff on isa0 unknown: <PNP0700> can't assign resources (port) unknown: <PNP0700> at port 0x3f2-0x3f5 on isa0 psmcpnp0: <PS/2 mouse port> at irq 12 on isa0 psm0: current command byte:0065 psm0: failed to reset the aux device. unknown: <PNP0303> can't assign resources (port) unknown: <PNP0303> at port 0x60 on isa0 speaker0: <PC speaker> at port 0x61 on isa0 Device configuration finished. Timecounter "TSC" frequency 1380008649 Hz quality -100 Timecounters tick every 1.000Couldn't get vector from ISR! msec lo0: bpf attached ata0-master: pio=0Couldn't get vector from ISR!x0c wdma=0x22 uCouldn't get vector from ISR!dma=0x45 caCouldn't get vector from ISR!ble=80pin ad0: setting UDMA100 on AMD 768 chip GEOM: creatCouldn't get vector from ISR!e disk ad0 dp=0Couldn't get vector from ISR!xc629e970 ad0:Couldn't get vector from ISR! <ST340810A/3.3Couldn't get vector from ISR!9> ATA-6 disk aCouldn't get vector from ISR!t ata0-master Couldn't get vector from ISR!ad0: 38166MB (7Couldn't get vector from ISR!8165360 sectorsCouldn't get vector from ISR!), 77545 C,Couldn't get vector from ISR! 16 H, 63 S, 512 BCouldn't get vector from ISR! ad0: 16 secs/int, 1 depth queue, UDMA100 GEOM: new disk ad0 Couldn't get vector from ISR!ata1-master: pio=0x0c wdma=0x22 udma=0x42 cable=40pin acd0: setting PICouldn't get vector from ISR!O4 on AMD 768 cCouldn't get vector from ISR!hip acd0: <TOSCouldn't get vector from ISR!HIBA CD-ROMCouldn't get vector from ISR! XM-6702B/1005> CDRCouldn't get vector from ISR!OM drive at ataCouldn't get vector from ISR!1 as masterCouldn't get vector from ISR! acd0: read 82Couldn't get vector from ISR!68KB/s (8268KB/s), 128KB buffer, PIO4 acd0: Reads: CDR, CDRW, CDDA stream acd0: Writes: acd0: Audio: play, 16 volume levels acd0: MechanCouldn't get vector from ISR!ism: ejectable Couldn't get vector from ISR!tray, unlockedCouldn't get vector from ISR! acd0: MediCouldn't get vector from ISR!um: no/blank disc SMP: AP CPU #1 Launched! cpu1 AP: ID: 0x01000000 VER: 0x00040010 LDR: 0x02000000 DFR: 0x0fffffff lint0: 0x00010700 lint1: 0x00010400 TPR: 0x00000000 SVR: 0x000001ff i[o0a]p ifc:08:0 rtoyupt:i1n6g5 isn(tCpHiSn) :10 /(1I/R1Q e1(CCHoSu)l:d1n0'2t3 /g2e5t4 /v6e3c tso:r6 3f rlo:m7 8I1S5R6!)1 6t2o c[l1u]s tfe:r0 00 t yipo:a0p si(cCHCSo)u:l0d/n0'/t0 gee(tC HvSe)c:t0o/r0 /f0r osm: 0I SlR:!00: r[o2u]t ifn:g0 0i nttyppi:n0 3s ((CIHRSQ) :03/)0 /t0o ec(lCuHsSt)e:r0 /00/ 0i osa:p0i cl0::0 r o[u3t]i nfg: 0i0n ttpyipn: 04 s((ICRHQS) :40)/ 0t/o0 cel(uCsHtSe)r: 00/0/ 0i osa:p0 ilc:00: routGiEnOgM :i nCtopnifni g6u r(eI RaQd 06s)1 ,t os tcalruts t3e2r2 506 lieonagptihc 04:0 0r1o5u9t5i4n9g4 4i netnpdi n4 070 1(5I9R8Q7 179)9 t o cluster 0 ioapic0: routing intpin 8 (IRQ 8) to cluster 0 ioapic0: routing intpin 13Couldn't get vector from ISR! (IRQ 13) to clCouldn't get vector from ISR!uster 0 ioapicCouldn't get vector from ISR!0: routing intpCouldn't get vector from ISR!in 14 (IRQ Couldn't get vector from ISR!14) to cluster Couldn't get vector from ISR!0 ioapic0: rouCouldn't get vector from ISR!ting intpin 15 (IRQ 15) to cluster 0 GEOM: Configure ad0s1a, start 0 length 268435456 end 268435455 GEOM: Configure ad0s1b, start 268435456 length 1052180480 end 1320615935 GEOM: Configure ad0s1c, start 0 length 40015954944 end 40015954943 GEOM: Configure ad0s1d, start 1320615936 length 268435456 end 1589051391 GEOM: Configure ad0s1e, start 1589051392 length 268435456 end 1857486847 GEOM: Configure ad0s1f, start 1857486848 length 38158468096 end 40015954943 Mounting root from ufs:/dev/ad0s1a start_init: trying /sbin/init xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xc400-0xc47f mem 0xf7000000-0xf700007f irq 18 at device 5.0 on pci2 pcib2: device xl0 requested decoded memory range 0xf7000000-0xf700007f xl0: using memory mapped I/O xl0: Ethernet address: 00:01:02:df:1c:b9 xl0: media options word: a xl0: found MII/AUTO xl0: bpf attached ioapic0: routing intpin 18 (IRQ 18) to cluster 0 miibus0: <MII bus> on xl0 xlphy0: <3c905C 10/100 internal PHY> on miibus0 xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto hatm0: <FORE HE> mem 0xf8000000-0xf80fffff irq 16 at device 8.0 on pci0 hatm0: carrier detected hatm0: bpf attached ioapic0: routing inCouldn't get vector from ISR!tpin 16 (IRQ 16) to cluster 0 hatm1: <FORE HE> mem 0xf6800000-0xf68fffff irq 17 at device 6.0 on pci2 pcib2: device hatm1 requested decoded memory range 0xf6800000-0xf68fffff hatm1: hw.hatm1.rbps1_size=4096 hatm1: hw.hatm1.rbps1_thresh=2048 hatm1: hw.hatm1.tpdrq_size=4096 hatm1: hw.hatm1.tpdmax=0 hatm1: hw.hatm1.max_mbuf_pages=2048 hatm1: hw.hatm1.mpsafe=1 hatm1: carrier detCouldn't get vector from ISR!ected hatm1: bpf attached ioapic0: routing intpin 17 (IRQ 17) to cluster 0 hatm2: <FORE HE> mem 0xf6000000-0xf60fffff irq 19 at device 8.0 on pci2 pcib2: device hatm2 requested decodCouldn't get vector from ISR!ed memory range 0xf6000000-0xf60fffff hatm2: hw.hatm2.rbps1_size=4096 hatm2: hw.hatm2.rbps1_thresh=2048 hatm2: hw.hatm2.tbrq0_size=8192 hatm2: hw.hatm2.tbrq0_thresh=6400 hatm2: hw.hatm2.tpdrq_sizeC=o4u0l9d6n 'hta tgme2t: vhewc.thoart mf2r.otmp dImSaRx!=0 hatm2: hw.hatm2.mpsafe=1 hatm2: carrier detected hatm2: bpf attached ioapic0: routing intpin 19 (IRQ 19) to cluster 0 hatm0: ForeRunnerHE 622, Rev. D, S/N 2949834, MAC=00:20:48:2d:02:ca (64bit PCI) hatm1: ForeRunnerHE 155, Rev. B, S/N 3026384, MAC=00:20:48:2e:2d:d0 (32bit PCI) hatm2: ForeRunnerHE 155, Rev. B, S/N 3027669, MAC=00:20:48:2e:32:d5 (32bit PCI) hatm0: txmbuf leaves 0 boot() called on cpu#1 Waiting (max 60 seconds) for system process `vnlru' to stop...stopped Waiting (max 60 seconds) for system process `bufdaemon' to stop...stopped Waiting (max 60 seconds) for system process `syncer' to stop...stopped syncing disks, buffers remaining... 1 done Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.1-CURRENT #33: Wed Nov 5 10:55:08 CET 2003 hbb@beagle.fokus.fraunhofer.de:/opt/obj/usr/src/sys/MARIPOSA Preloaded elf kernel "/boot/kernel/kernel" at 0xc06ea000. Preloaded elf module "/boot/kernel/random.ko" at 0xc06ea278. Calibrating clock(s) ... i8254 clock: 1193137 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 1380011703 Hz CPU: AMD Athlon(TM) MP 1800+ (1380.01-MHz 686-class CPU) Origin = "AuthenticAMD" Id = 0x662 Stepping = 2 Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> AMD Features=0xc0480000<MP,AMIE,DSP,3DNow!> Data TLB: 32 entries, fully associative Instruction TLB: 16 entries, fully associative L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative L2 internal cache: 256 kbytes, 64 bytes/line, 1 lines/tag, 8-way associative real memory = 536788992 (511 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000000829000 - 0x000000001f6c5fff, 518639616 bytes (126621 pages) avail memory = 516001792 (492 MB) ACPI APIC Table: <ASUS A7M266-D> APIC ID: physical 0, logical 0:0 APIC ID: physical 1, logical 0:1 FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 APIC: CPU 0 has ACPI ID 0 APIC: CPU 1 has ACPI ID 1 bios32: Found BIOS32 Service Directory header at 0xc00f2560 bios32: Entry = 0xf1d20 (c00f1d20) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xf0000+0x1f20 pnpbios: Found PnP BIOS data at 0xc00fc5e0 pnpbios: Entry = f0000:c610 Rev = 1.0 pnpbios: OEM ID cd041 Other BIOS signatures found: MADT: Found IO APIC ID 2, Vector 0 at 0xfec00000 ioapic0: intpin 0 -> ExtINT ioapic0: intpin 1 -> irq 1 ioapic0: intpin 2 -> irq 2 ioapic0: intpin 3 -> irq 3 ioapic0: intpin 4 -> irq 4 ioapic0: intpin 5 -> irq 5 ioapic0: intpin 6 -> irq 6 ioapic0: intpin 7 -> irq 7 ioapic0: intpin 8 -> irq 8 ioapic0: intpin 9 -> irq 9 ioapic0: intpin 10 -> irq 10 ioapic0: intpin 11 -> irq 11 ioapic0: intpin 12 -> irq 12 ioapic0: intpin 13 -> irq 13 ioapic0: intpin 14 -> irq 14 ioapic0: intpin 15 -> irq 15 ioapic0: intpin 16 -> irq 16 ioapic0: intpin 17 -> irq 17 ioapic0: intpin 18 -> irq 18 ioapic0: intpin 19 -> irq 19 ioapic0: intpin 20 -> irq 20 ioapic0: intpin 21 -> irq 21 ioapic0: intpin 22 -> irq 22 ioapic0: intpin 23 -> irq 23 MADT: intr override: source 0, irq 2 ioapic0: Routing IRQ 0 -> intpin 2 ioapic0: intpin 2 trigger: edge ioapic0: intpin 2 polarity: active-hi MADT: intr override: source 9, irq 9 ioapic0: intpin 9 trigger: level ioapic0: intpin 9 polarity: active-lo lapic0: Routing NMI -> LINT1 lapic0: LINT1 trigger: edge lapic0: LINT1 polarity: active-hi lapic1: Routing NMI -> LINT1 lapic1: LINT1 trigger: edge lapic1: LINT1 polarity: active-hi ioapic0 <Version 17> irqs 0-23 on motherboard cpu0 BSP: ID: 0x00000000 VER: 0x00040010 LDR: 0x01000000 DFR: 0x0fffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff null: <null device, zero device> mem: <memory & I/O> Pentium Pro MTRR support enabled random: <entropy source> acpi0: <ASUS A7M266-D> on motherboard pci_open(1): mode 1 addr port (0x0cf8) is 0x80012848 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=700c1022) pcibios: BIOS version 2.10 Using $PIR table, 9 entries at 0xc00f24a0 PCI-Only Interrupts: none Location Bus Device Pin Link IRQs embedded 0 7 B 0x01 3 4 5 7 9 10 11 12 embedded 0 7 C 0x02 3 4 5 7 9 10 11 12 embedded 0 7 D 0x03 3 4 5 7 9 10 11 12 slot 1 0 8 B 0x01 3 4 5 7 9 10 11 12 slot 1 0 8 C 0x02 3 4 5 7 9 10 11 12 slot 1 0 8 D 0x03 3 4 5 7 9 10 11 12 slot 2 0 9 A 0x01 3 4 5 7 9 10 11 12 slot 2 0 9 B 0x02 3 4 5 7 9 10 11 12 slot 2 0 9 C 0x03 3 4 5 7 9 10 11 12 slot 3 2 6 A 0x01 3 4 5 7 9 10 11 12 slot 3 2 6 B 0x02 3 4 5 7 9 10 11 12 slot 3 2 6 C 0x03 3 4 5 7 9 10 11 12 slot 4 2 5 A 0x02 3 4 5 7 9 10 11 12 slot 4 2 5 B 0x03 3 4 5 7 9 10 11 12 slot 4 2 5 D 0x01 3 4 5 7 9 10 11 12 slot 5 2 8 A 0x03 3 4 5 7 9 10 11 12 slot 5 2 8 C 0x01 3 4 5 7 9 10 11 12 slot 5 2 8 D 0x02 3 4 5 7 9 10 11 12 embedded 1 5 B 0x01 3 4 5 7 9 10 11 12 embedded 1 5 C 0x02 3 4 5 7 9 10 11 12 embedded 1 5 D 0x03 3 4 5 7 9 10 11 12 embedded 2 4 A 0x01 3 4 5 7 9 10 11 12 embedded 2 4 B 0x02 3 4 5 7 9 10 11 12 embedded 2 4 C 0x03 3 4 5 7 9 10 11 12 embedded 2 0 B 0x01 3 4 5 7 9 10 11 12 embedded 2 0 C 0x02 3 4 5 7 9 10 11 12 embedded 2 0 D 0x03 3 4 5 7 9 10 11 12 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 0 dev 7 func 3 acpi0: Power Button (fixed) acpi0: Sleep Button (fixed) ACPI timer looks GOOD min = 3, max = 4, width = 1 ACPI timer looks GOOD min = 3, max = 4, width = 1 ACPI timer looks GOOD min = 3, max = 4, width = 1 ACPI timer looks GOOD min = 3, max = 4, width = 1 ACPI timer looks GOOD min = 3, max = 4, width = 1 ACPI timer looks GOOD min = 3, max = 4, width = 1 ACPI timer looks GOOD min = 3, max = 4, width = 1 ACPI timer looks GOOD min = 3, max = 4, width = 1 ACPI timer looks GOOD min = 3, max = 4, width = 1 ACPI timer looks GOOD min = 3, max = 4, width = 1 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0xe408-0xe40b on acpi0 acpi_cpu0: <CPU> on acpi0 acpi_cpu1: <CPU> on acpi0 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 ---- initial configuration ------------------------ ---- before setting priority for links ------------ ---- before fixup boot-disabled links ------------- ---- after fixup boot-disabled links -------------- ---- arbitrated configuration --------------------- pci0: <ACPI PCI bus> on pcib0 pci0: physical bus=0 map[10]: type 3, range 32, base fc000000, size 25, enabled map[14]: type 3, range 32, base fb800000, size 12, enabled map[18]: type 4, range 32, base 0000e800, size 2, port disabled found-> vendor=0x1022, dev=0x700c, revid=0x11 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x2230, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x700d, revid=0x00 bus=0, slot=1, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0007, statreg=0x0220, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x7440, revid=0x04 bus=0, slot=7, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x000f, statreg=0x0220, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[20]: type 4, range 32, base 0000d800, size 4, enabled found-> vendor=0x1022, dev=0x7441, revid=0x04 bus=0, slot=7, func=1 class=01-01-8a, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0200, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x7443, revid=0x03 bus=0, slot=7, func=3 class=06-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0000, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[10]: type 1, range 32, base f8000000, size 20, enabled pcib0: matched entry for 0.8.INTA (source ) pcib0: device is hardwired to IRQ 20 found-> vendor=0x1127, dev=0x0400, revid=0x00 bus=0, slot=8, func=0 class=02-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0016, statreg=0x0220, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x10 (4000 ns), maxlat=0x01 (250 ns) intpin=a, irq=20 found-> vendor=0x1022, dev=0x7448, revid=0x04 bus=0, slot=16, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0017, statreg=0x2220, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0xe000-0xdfff pcib1: memory decode 0xf8800000-0xf9bfffff pcib1: prefetched decode 0xf9f00000-0xfb7fffff ---- initial configuration ------------------------ ---- before setting priority for links ------------ ---- before fixup boot-disabled links ------------- ---- after fixup boot-disabled links -------------- ---- arbitrated configuration --------------------- pci1: <ACPI PCI bus> on pcib1 pci1: physical bus=1 map[10]: type 3, range 32, base fa000000, size 24, enabled map[14]: type 1, range 32, base f9000000, size 14, enabled map[18]: type 1, range 32, base f8800000, size 23, enabled pcib1: matched entry for 1.5.INTA (source ) pcib1: device is hardwired to IRQ 16 found-> vendor=0x102b, dev=0x0521, revid=0x01 bus=1, slot=5, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0290, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x10 (4000 ns), maxlat=0x20 (8000 ns) intpin=a, irq=16 powerspec 1 supports D0 D3 current D0 pci1: <display, VGA> at device 5.0 (no driver attached) isab0: <PCI-ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <AMD 768 UDMA100 controller> port 0xd800-0xd80f at device 7.1 on pci0 ata0: reset tp1 mask=03 ostat0=50 ostat1=00 ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata0-slave: stat=0x00 err=0x01 lsb=0x00 msb=0x00 ata0: reset tp2 mask=03 stat0=50 stat1=00 devices=0x1<ATA_MASTER> ata0: at 0x1f0 irq 14 on atapci0 ata0: [MPSAFE] ata1: reset tp1 mask=03 ostat0=50 ostat1=00 ata1-master: stat=0x00 err=0x01 lsb=0x14 msb=0xeb ata1-slave: stat=0x00 err=0x04 lsb=0x7f msb=0x7f ata1: reset tp2 mask=03 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER> ata1: at 0x170 irq 15 on atapci0 ata1: [MPSAFE] pci0: <bridge, PCI-unknown> at device 7.3 (no driver attached) pci0: <network, ATM> at device 8.0 (no driver attached) pcib2: <ACPI PCI-PCI bridge> at device 16.0 on pci0 pcib2: secondary bus 2 pcib2: subordinate bus 2 pcib2: I/O decode 0xc000-0xcfff pcib2: memory decode 0xf6000000-0xf7ffffff pcib2: prefetched decode 0xf9c00000-0xf9dfffff ---- initial configuration ------------------------ ---- before setting priority for links ------------ ---- before fixup boot-disabled links ------------- ---- after fixup boot-disabled links -------------- ---- arbitrated configuration --------------------- pci2: <ACPI PCI bus> on pcib2 pci2: physical bus=2 map[10]: type 4, range 32, base 0000c800, size 8, enabled pcib2: matched entry for 2.4.INTA (source ) pcib2: device is hardwired to IRQ 17 found-> vendor=0x13f6, dev=0x0111, revid=0x10 bus=2, slot=4, func=0 class=04-01-00, hdrtype=0x00, mfdev=0 cmdreg=0x0085, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x02 (500 ns), maxlat=0x18 (6000 ns) intpin=a, irq=17 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 4, range 32, base 0000c400, size 7, enabled map[14]: type 1, range 32, base f7000000, size 7, enabled pcib2: matched entry for 2.5.INTA (source ) pcib2: device is hardwired to IRQ 18 found-> vendor=0x10b7, dev=0x9200, revid=0x74 bus=2, slot=5, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0017, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x0a (2500 ns), maxlat=0x0a (2500 ns) intpin=a, irq=18 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base f6800000, size 20, enabled pcib2: matched entry for 2.6.INTA (source ) pcib2: device is hardwired to IRQ 17 found-> vendor=0x1127, dev=0x0400, revid=0x01 bus=2, slot=6, func=0 class=02-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0016, statreg=0x0220, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x10 (4000 ns), maxlat=0x01 (250 ns) intpin=a, irq=17 map[10]: type 1, range 32, base f6000000, size 20, enabled pcib2: matched entry for 2.8.INTA (source ) pcib2: device is hardwired to IRQ 19 found-> vendor=0x1127, dev=0x0400, revid=0x01 bus=2, slot=8, func=0 class=02-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0016, statreg=0x0220, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x10 (4000 ns), maxlat=0x01 (250 ns) intpin=a, irq=19 pci2: <multimedia, audio> at device 4.0 (no driver attached) pci2: <network, ethernet> at device 5.0 (no driver attached) pci2: <network, ATM> at device 6.0 (no driver attached) pci2: <network, ATM> at device 8.0 (no driver attached) unknown: not probed (disabled) speaker0 port 0x61 on acpi0 fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 unknown: not probed (disabled) ppc0: using extended I/O port range ppc0: ECP SPP ECP+EPP SPP ppc0 port 0x778-0x77f,0x378-0x37f irq 7 drq 3 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/9 bytes threshold ppbus0: <Parallel port bus> on ppc0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port sio0: irq maps: 0xc0c1 0xc0d1 0xc0c1 0xc0c1 sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A, console sio1: irq maps: 0xc0c1 0xc0c9 0xc0c1 0xc0c1 sio1 port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A unknown: not probed (disabled) atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0065 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x1d0000 psm0: unable to allocate IRQ unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it atkbdc: atkbdc0 already exists; skipping it fdc: fdc0 already exists; skipping it ppc: ppc0 already exists; skipping it sio: sio0 already exists; skipping it sio: sio1 already exists; skipping it Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices orm0: <Option ROMs> at iomem 0xc8000-0xc87ff,0xc0000-0xc7fff on isa0 adv0: not probed (disabled) aha0: not probed (disabled) aic0: not probed (disabled) bt0: not probed (disabled) cs0: not probed (disabled) ed0: not probed (disabled) fe0: not probed (disabled) ie0: not probed (disabled) le0: not probed (disabled) lnc0: not probed (disabled) pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0 pcic1: not probed (disabled) sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x100> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) sio2: not probed (disabled) sio3: not probed (disabled) sn0: not probed (disabled) vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x7007f fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 50 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff EGA/VGA parameters to be used for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff vt0: not probed (disabled) isa_probe_children: probing PnP devices Device configuration finished. Timecounter "TSC" frequency 1380011703 Hz qualitCouldn't get vector from ISR!y -100 Timecounters tick every 1.000 Couldn't get vector from ISR!msec lo0: bpf attached acpi_cpu: throttling enabled, 2 steps (100% to 50.0%), currently 100.0% ata0-master: pio=0x0c wdma=0x22 udma=0x45 cable=80pin ad0: setting UDMA100 on AMD 768 chip GEOM: create disk ad0 dp=0xc63bbd70 ad0: <ST340810A/3.39> ATA-6 disk at ata0Couldn't get vector from ISR!-master ad0: 38166MB (78165360 sectors), 77545 C, 16 H, 63 S, 512 B ad0: 16 secs/int, 1 depth queue, UDMA100 GEOM: new disk ad0 ata1-master: pioCouldn't get vector from ISR!=0x0c wdma=0x22 udma=0x42 cable=40pin [0] f:80 typ:165 s(CHS):0/1/1 e(CCouldn't get vector from ISR!HS):1023/Couldn't get vector from ISR!254/63 s:63 l:78156162 [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:Couldn't get vector from ISR!0 l:0 GEOM: ConCouldn't get vector from ISR!figure ad0s1, stCouldn't get vector from ISR!art 32256 length 4001595494Couldn't get vector from ISR!4 end 40015987199 acd0: setting PIO4 on AMD 768 chip acd0: <TOSHIBA CD-ROM XM-6702B/1005> CDROM drive at ata1 as master acdCouldn't get vector from ISR!0: read 8268KB/s (8268KB/s), 128KB buffer, PIO4 acd0: Reads: CDR, CDRW, CDDA stream acd0: Writes: acd0: Audio: play, 16 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: no/blank disc SMP: AP CPU #1 Launched! cpu1 AP: ID: 0x01000000 VER: 0x00040010 LDR: 0x02000000 DFR: 0x0fffffff lint0: 0x00010700 lint1: 0x00010400 TPR: 0x00000000 SVR: 0x000001ff ioapiGcE0O:M :r oCuotnifnigg uirnet paidn0 s11 a(,I RstQa r1t) 0t ol ecnlgutsht e2r6 8043 5i4o5a6p iecn0d: 2r6o8u4t3i5n4g5 5in tGpEiOnM :3 C(oInRfQi g3u)r et oa d0csl1ub,s tsetra r0t 2i6o8a4p3i5c405:6 rloeuntgitnhg 1i0n5t2p1i8n0 448 0( IeRnQd 41)3 2t0o6 1c5l9u3s5te rG E0OM :i oCaopnifci0g:u rreo uatdi0nsg1 ci,n tsptianr t6 0( IlReQn g6t)h 4t0o0 1c5l9u5s4t9e4r4 0en di o4a0p0i1c509:5 4r9o4u3ti nGgE OiMn:t pCionn f7ig u(rIeR Qa d70)s 1tdo, csltuasrtte r1 3020 6i1o5a9p3i6c 0l:e nrgotuht i2n6g84 3i5n4t5p6i ne n8d (1I5R8Q9 085)1 3t9o1 c lGuEsOtMe:r C0on fiiogaupriec 0a:d 0rso1uet,i nsgt airtn t1p5i8n9 095 1(3I9R2Q l9e)n gttoh c2l6u8s4t3e5r4 506 einoda p1i8c507:4 8r6o8u4t7in gG EiOnMt:p iCno n1f3i g(uIrReQ a1d30)s 1tfo, csltuasrtte r1 8057 4i8o6a8p4i8c 0l:e nrgotuht i3n8g1 5i8n4t6p8i0n9 61 4e n(dI R4Q0 01145)9 5t4o9 4c3lu ster 0 ioapic0: routCouldn't get vector from ISR!ing intpin 15 (IRQ Couldn't get vector from ISR!15) to cluster Couldn't get vector from ISR!0 Mounting root from ufs:/dev/ad0s1a start_init: trying /sbin/init xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xc400-0xc47f mem 0xf7000000-0xf700007f irq 18 at device 5.0 on pci2 pcib2: device xl0 requested decoded memory range 0xf7000000-0xf700007f xl0: using memory mapped I/O xl0: Ethernet aCdodurledsns':t 0g0e:t0 1v:e0c2t:odrf :f1rco:mb 9I SR!xl0: media options word: a xl0: found MII/AUTO xl0: bpf attached ioapic0: routing intpin 18 (IRQ 18) to cluster 0 miibus0: <MII bus> on xl0 xlphy0: <3c905C 10/100 internal PHY> on miibus0 xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto hatm0: <FORE HE> mem 0xf8000000-0xf80fffff irq 20 at device 8.0 on pci0 hatm0: carrier detected hatm0: bpf attached ioapic0: routing intpin 20 (IRQ 20) to cluster 0 hatm1: <FORE HE> mem 0xf6800000-0xf68fffff irq 17 at device 6.0 on pci2 pcib2: device hatm1 requested decoded memCooruyl drna'ntg eg e0tx fv6e8c0t0o0r0 0f-r0oxmf 6I8SfRf!fff hatm1: hw.hatm1.rbps1_size=4096 hatm1: hw.hatm1.rbps1_thresh=2048 hatm1: hw.hatm1.tpdrq_size=4096 hatm1: hw.hatm1.tpdmax=0 hatm1: hw.hatm1.max_mbuf_pages=2048 hatm1: hw.hatm1.mpsafe=1 hatm1: carrier detected hatm1: bpf attached ioapic0: routing intpin 17 (IRQ 17) to cluster 0 hatm2: <FORE HE> mem 0xf6000000-0xCfo6u0lfdfnf'ftf giertq v1e9ctor from ISR! at device 8.0 on pci2 pcib2: device hatm2 requested decoded memory range 0xf6000000-0xf60fffff hatm2: hw.hatm2.rbps1_size=4096 hatm2: hw.hatm2.rbps1_thresh=2048 hatm2: hw.hatm2.tbrq0_size=8192 hatm2: hw.hatm2.tbrq0_thresh=6400 hatm2: hw.hatm2.tpdrq_size=4096 hatm2: hw.hatm2.tpdmax=0 hatm2: hw.hatm2.mpsCouldn't get vector from ISR!afe=1 hatm2: carrier detected hatm2: bpf attached ioapic0: routing intpin 19 (IRQ 19) to cluster 0 hatm0: ForeRunnerHE 622, Rev. D, S/N 2949834, MAC=00:20:48:2d:02:ca (64bit PCI) hatm1: ForeRunnerHE 155, Rev. B, S/N 3026384, MAC=00:20:48:2e:2d:d0 (32bit PCI) hatm2: ForeRunnerHE 155, Rev. B, S/N 3027669, MAC=00:20:48:2e:32:d5 (32bit PCI) hatm0: txmbuf leaves 0 [-- Attachment #3 --] Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.1-CURRENT #32: Wed Nov 5 10:46:25 CET 2003 hbb@beagle.fokus.fraunhofer.de:/opt/obj/usr/src/sys/MARIPOSA Preloaded elf kernel "/boot/kernel/kernel" at 0xc06a4000. Preloaded elf module "/boot/kernel/random.ko" at 0xc06a4278. Calibrating clock(s) ... i8254 clock: 1193145 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 1380008649 Hz CPU: AMD Athlon(TM) MP 1800+ (1380.01-MHz 686-class CPU) Origin = "AuthenticAMD" Id = 0x662 Stepping = 2 Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> AMD Features=0xc0480000<MP,AMIE,DSP,3DNow!> Data TLB: 32 entries, fully associative Instruction TLB: 16 entries, fully associative L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative L2 internal cache: 256 kbytes, 64 bytes/line, 1 lines/tag, 8-way associative real memory = 536788992 (511 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000000829000 - 0x000000001f6c5fff, 518639616 bytes (126621 pages) avail memory = 516005888 (492 MB) MPTable: <ASUS PROD00000000> APIC ID: physical 0, logical 0:0 APIC ID: physical 1, logical 0:1 FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 bios32: Found BIOS32 Service Directory header at 0xc00f2560 bios32: Entry = 0xf1d20 (c00f1d20) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xf0000+0x1f20 pnpbios: Found PnP BIOS data at 0xc00fc5e0 pnpbios: Entry = f0000:c610 Rev = 1.0 pnpbios: OEM ID cd041 Other BIOS signatures found: ioapic0: Assuming intbase of 0 ioapic0: intpin 0 -> ExtINT ioapic0: intpin 1 -> irq 1 ioapic0: intpin 2 -> irq 2 ioapic0: intpin 3 -> irq 3 ioapic0: intpin 4 -> irq 4 ioapic0: intpin 5 -> irq 5 ioapic0: intpin 6 -> irq 6 ioapic0: intpin 7 -> irq 7 ioapic0: intpin 8 -> irq 8 ioapic0: intpin 9 -> irq 9 ioapic0: intpin 10 -> irq 10 ioapic0: intpin 11 -> irq 11 ioapic0: intpin 12 -> irq 12 ioapic0: intpin 13 -> irq 13 ioapic0: intpin 14 -> irq 14 ioapic0: intpin 15 -> irq 15 ioapic0: intpin 16 -> irq 16 ioapic0: intpin 17 -> irq 17 ioapic0: intpin 18 -> irq 18 ioapic0: intpin 19 -> irq 19 ioapic0: intpin 20 -> irq 20 ioapic0: intpin 21 -> irq 21 ioapic0: intpin 22 -> irq 22 ioapic0: intpin 23 -> irq 23 ioapic0: intpin 16 trigger: level ioapic0: intpin 16 polarity: active-lo ioapic0: intpin 16 trigger: level ioapic0: intpin 16 polarity: active-lo ioapic0: intpin 19 trigger: level ioapic0: intpin 19 polarity: active-lo ioapic0: intpin 17 trigger: level ioapic0: intpin 17 polarity: active-lo ioapic0: intpin 18 trigger: level ioapic0: intpin 18 polarity: active-lo ioapic0: intpin 17 trigger: level ioapic0: intpin 17 polarity: active-lo ioapic0: intpin 19 trigger: level ioapic0: intpin 19 polarity: active-lo ioapic0: intpin 1 trigger: edge ioapic0: intpin 1 polarity: active-hi ioapic0: Routing IRQ 0 -> intpin 2 ioapic0: intpin 2 trigger: edge ioapic0: intpin 2 polarity: active-hi ioapic0: intpin 3 trigger: edge ioapic0: intpin 3 polarity: active-hi ioapic0: intpin 4 trigger: edge ioapic0: intpin 4 polarity: active-hi ioapic0: intpin 6 trigger: edge ioapic0: intpin 6 polarity: active-hi ioapic0: intpin 7 trigger: edge ioapic0: intpin 7 polarity: active-hi ioapic0: intpin 8 trigger: edge ioapic0: intpin 8 polarity: active-hi ioapic0: intpin 9 trigger: edge ioapic0: intpin 9 polarity: active-hi ioapic0: intpin 13 trigger: edge ioapic0: intpin 13 polarity: active-hi ioapic0: intpin 14 trigger: edge ioapic0: intpin 14 polarity: active-hi ioapic0: intpin 15 trigger: edge ioapic0: intpin 15 polarity: active-hi lapic: Routing ExtINT -> LINT0 lapic: LINT0 trigger: edge lapic: LINT0 polarity: active-hi lapic: Routing NMI -> LINT1 lapic: LINT1 trigger: edge lapic: LINT1 polarity: active-hi ioapic0 <Version 17> irqs 0-23 on motherboard cpu0 BSP: ID: 0x00000000 VER: 0x00040010 LDR: 0x01000000 DFR: 0x0fffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff mem: <memory & I/O> Pentium Pro MTRR support enabled null: <null device, zero device> random: <entropy source> npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface pci_open(1): mode 1 addr port (0x0cf8) is 0x80012848 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=700c1022) pcibios: BIOS version 2.10 Using $PIR table, 9 entries at 0xc00f24a0 PCI-Only Interrupts: none Location Bus Device Pin Link IRQs embedded 0 7 B 0x01 3 4 5 7 9 10 11 12 embedded 0 7 C 0x02 3 4 5 7 9 10 11 12 embedded 0 7 D 0x03 3 4 5 7 9 10 11 12 slot 1 0 8 B 0x01 3 4 5 7 9 10 11 12 slot 1 0 8 C 0x02 3 4 5 7 9 10 11 12 slot 1 0 8 D 0x03 3 4 5 7 9 10 11 12 slot 2 0 9 A 0x01 3 4 5 7 9 10 11 12 slot 2 0 9 B 0x02 3 4 5 7 9 10 11 12 slot 2 0 9 C 0x03 3 4 5 7 9 10 11 12 slot 3 2 6 A 0x01 3 4 5 7 9 10 11 12 slot 3 2 6 B 0x02 3 4 5 7 9 10 11 12 slot 3 2 6 C 0x03 3 4 5 7 9 10 11 12 slot 4 2 5 A 0x02 3 4 5 7 9 10 11 12 slot 4 2 5 B 0x03 3 4 5 7 9 10 11 12 slot 4 2 5 D 0x01 3 4 5 7 9 10 11 12 slot 5 2 8 A 0x03 3 4 5 7 9 10 11 12 slot 5 2 8 C 0x01 3 4 5 7 9 10 11 12 slot 5 2 8 D 0x02 3 4 5 7 9 10 11 12 embedded 1 5 B 0x01 3 4 5 7 9 10 11 12 embedded 1 5 C 0x02 3 4 5 7 9 10 11 12 embedded 1 5 D 0x03 3 4 5 7 9 10 11 12 embedded 2 4 A 0x01 3 4 5 7 9 10 11 12 embedded 2 4 B 0x02 3 4 5 7 9 10 11 12 embedded 2 4 C 0x03 3 4 5 7 9 10 11 12 embedded 2 0 B 0x01 3 4 5 7 9 10 11 12 embedded 2 0 C 0x02 3 4 5 7 9 10 11 12 embedded 2 0 D 0x03 3 4 5 7 9 10 11 12 pcib0: <MPTable Host-PCI bridge> at pcibus 0 on motherboard pci0: <PCI bus> on pcib0 pci0: physical bus=0 map[10]: type 3, range 32, base fc000000, size 25, enabled map[14]: type 3, range 32, base fb800000, size 12, enabled map[18]: type 4, range 32, base 0000e800, size 2, port disabled found-> vendor=0x1022, dev=0x700c, revid=0x11 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x2230, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x700d, revid=0x00 bus=0, slot=1, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0007, statreg=0x0220, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x7440, revid=0x04 bus=0, slot=7, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x000f, statreg=0x0220, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[20]: type 4, range 32, base 0000d800, size 4, enabled found-> vendor=0x1022, dev=0x7441, revid=0x04 bus=0, slot=7, func=1 class=01-01-8a, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0200, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x7443, revid=0x03 bus=0, slot=7, func=3 class=06-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0000, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[10]: type 1, range 32, base f8000000, size 20, enabled pcib0: slot 8 INTA routed to irq 16 found-> vendor=0x1127, dev=0x0400, revid=0x00 bus=0, slot=8, func=0 class=02-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0016, statreg=0x0220, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x10 (4000 ns), maxlat=0x01 (250 ns) intpin=a, irq=16 found-> vendor=0x1022, dev=0x7448, revid=0x04 bus=0, slot=16, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0017, statreg=0x2220, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) pcib1: <MPTable PCI-PCI bridge> at device 1.0 on pci0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0xe000-0xdfff pcib1: memory decode 0xf8800000-0xf9bfffff pcib1: prefetched decode 0xf9f00000-0xfb7fffff pci1: <PCI bus> on pcib1 pci1: physical bus=1 map[10]: type 3, range 32, base fa000000, size 24, enabled map[14]: type 1, range 32, base f9000000, size 14, enabled map[18]: type 1, range 32, base f8800000, size 23, enabled pcib1: slot 5 INTA routed to irq 16 found-> vendor=0x102b, dev=0x0521, revid=0x01 bus=1, slot=5, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0290, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x10 (4000 ns), maxlat=0x20 (8000 ns) intpin=a, irq=16 powerspec 1 supports D0 D3 current D0 pci1: <display, VGA> at device 5.0 (no driver attached) isab0: <PCI-ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <AMD 768 UDMA100 controller> port 0xd800-0xd80f at device 7.1 on pci0 ata0: reset tp1 mask=03 ostat0=50 ostat1=00 ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata0-slave: stat=0x00 err=0x01 lsb=0x00 msb=0x00 ata0: reset tp2 mask=03 stat0=50 stat1=00 devices=0x1<ATA_MASTER> ata0: at 0x1f0 irq 14 on atapci0 ata0: [MPSAFE] ata1: reset tp1 mask=03 ostat0=50 ostat1=00 ata1-master: stat=0x00 err=0x01 lsb=0x14 msb=0xeb ata1-slave: stat=0x00 err=0x04 lsb=0x7f msb=0x7f ata1: reset tp2 mask=03 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER> ata1: at 0x170 irq 15 on atapci0 ata1: [MPSAFE] pci0: <bridge, PCI-unknown> at device 7.3 (no driver attached) pci0: <network, ATM> at device 8.0 (no driver attached) pcib2: <MPTable PCI-PCI bridge> at device 16.0 on pci0 pcib2: secondary bus 2 pcib2: subordinate bus 2 pcib2: I/O decode 0xc000-0xcfff pcib2: memory decode 0xf6000000-0xf7ffffff pcib2: prefetched decode 0xf9c00000-0xf9dfffff pci2: <PCI bus> on pcib2 pci2: physical bus=2 map[10]: type 4, range 32, base 0000c800, size 8, enabled pcib2: slot 4 INTA routed to irq 17 found-> vendor=0x13f6, dev=0x0111, revid=0x10 bus=2, slot=4, func=0 class=04-01-00, hdrtype=0x00, mfdev=0 cmdreg=0x0085, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x02 (500 ns), maxlat=0x18 (6000 ns) intpin=a, irq=17 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 4, range 32, base 0000c400, size 7, enabled map[14]: type 1, range 32, base f7000000, size 7, enabled pcib2: slot 5 INTA routed to irq 18 found-> vendor=0x10b7, dev=0x9200, revid=0x74 bus=2, slot=5, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0017, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x0a (2500 ns), maxlat=0x0a (2500 ns) intpin=a, irq=18 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base f6800000, size 20, enabled pcib2: slot 6 INTA routed to irq 17 found-> vendor=0x1127, dev=0x0400, revid=0x01 bus=2, slot=6, func=0 class=02-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0016, statreg=0x0220, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x10 (4000 ns), maxlat=0x01 (250 ns) intpin=a, irq=17 map[10]: type 1, range 32, base f6000000, size 20, enabled pcib2: slot 8 INTA routed to irq 19 found-> vendor=0x1127, dev=0x0400, revid=0x01 bus=2, slot=8, func=0 class=02-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0016, statreg=0x0220, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x10 (4000 ns), maxlat=0x01 (250 ns) intpin=a, irq=19 pci2: <multimedia, audio> at device 4.0 (no driver attached) pci2: <network, ethernet> at device 5.0 (no driver attached) pci2: <network, ATM> at device 6.0 (no driver attached) pci2: <network, ATM> at device 8.0 (no driver attached) ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it pnpbios: 15 devices, largest 114 bytes PNP0401: adding dma mask 0x8 PNP0401: adding irq mask 0x80 PNP0401: adding io range 0x378-0x37f, size=0x8, align=0 PNP0401: adding io range 0x778-0x77f, size=0x8, align=0 pnpbios: handle 1 device ID PNP0401 (0104d041) PNP0501: adding irq mask 0x10 PNP0501: adding io range 0x3f8-0x3ff, size=0x8, align=0 pnpbios: handle 2 device ID PNP0501 (0105d041) PNP0501: adding irq mask 0x8 PNP0501: adding io range 0x2f8-0x2ff, size=0x8, align=0 pnpbios: handle 3 device ID PNP0501 (0105d041) PNP0700: adding irq mask 0x40 PNP0700: adding dma mask 0x4 PNP0700: adding io range 0x3f2-0x3f5, size=0x4, align=0 pnpbios: handle 4 device ID PNP0700 (0007d041) PNP0f13: adding irq mask 0x1000 pnpbios: handle 5 device ID PNP0f13 (130fd041) PNP0c01: adding fixed memory32 range 0-0x9ffff, size=0xa0000 PNP0c01: adding fixed memory32 range 0x100000-0x1fffffff, size=0x1ff00000 PNP0c01: adding fixed memory32 range 0xe8000-0xeffff, size=0x8000 PNP0c01: adding fixed memory32 range 0xf0000-0xf3fff, size=0x4000 PNP0c01: adding fixed memory32 range 0xf4000-0xf7fff, size=0x4000 PNP0c01: adding fixed memory32 range 0xf8000-0xfffff, size=0x8000 PNP0c01: adding fixed memory32 range 0xc8800-0xcbfff, size=0x3800 PNP0c01: adding fixed memory32 range 0xfffe0000-0xffffffff, size=0x20000 pnpbios: handle 6 device ID PNP0c01 (010cd041) PNP0100: adding irq mask 0x1 PNP0100: adding io range 0x40-0x43, size=0x4, align=0 pnpbios: handle 8 device ID PNP0100 (0001d041) PNP0b00: adding irq mask 0x100 PNP0b00: adding io range 0x70-0x75, size=0x6, align=0 pnpbios: handle 9 device ID PNP0b00 (000bd041) PNP0303: adding irq mask 0x2 PNP0303: adding io range 0x60-0x60, size=0x1, align=0 PNP0303: adding io range 0x64-0x64, size=0x1, align=0 pnpbios: handle 10 device ID PNP0303 (0303d041) PNP0c04: adding irq mask 0x2000 PNP0c04: adding io range 0xf0-0xf0, size=0x1, align=0 pnpbios: handle 11 device ID PNP0c04 (040cd041) PNP0200: adding dma mask 0x10 PNP0200: adding io range 0-0xf, size=0x10, align=0 PNP0200: adding io range 0x80-0x90, size=0x11, align=0 PNP0200: adding io range 0x94-0x9f, size=0xc, align=0 PNP0200: adding io range 0xc0-0xde, size=0x1f, align=0 pnpbios: handle 12 device ID PNP0200 (0002d041) PNP0800: adding io range 0x61-0x61, size=0x1, align=0x1 pnpbios: handle 13 device ID PNP0800 (0008d041) PNP0a03: adding io range 0xcf8-0xcff, size=0x8, align=0 pnpbios: handle 14 device ID PNP0a03 (030ad041) PNP0c02: adding io range 0xe400-0xe47f, size=0x80, align=0 PNP0c02: adding io range 0xe4e0-0xe4ff, size=0x20, align=0 pnpbios: handle 15 device ID PNP0c02 (020cd041) Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices orm0: <Option ROMs> at iomem 0xc8000-0xc87ff,0xc0000-0xc7fff on isa0 adv0: not probed (disabled) aha0: not probed (disabled) aic0: not probed (disabled) atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0065 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x1d0000 psm0: current command byte:0065 psm0: failed to reset the aux device. bt0: not probed (disabled) cs0: not probed (disabled) ed0: not probed (disabled) fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 fe0: not probed (disabled) ie0: not probed (disabled) le0: not probed (disabled) lnc0: not probed (disabled) pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0 pcic1: not probed (disabled) ppc0: parallel port found at 0x378 ppc0: using extended I/O port range ppc0: ECP SPP ECP+EPP SPP ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/9 bytes threshold ppbus0: <Parallel port bus> on ppc0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x100> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) sio0: irq maps: 0xe0c1 0xe0d1 0xe0c1 0xe0c1 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A, console sio1: irq maps: 0xe0c1 0xe0c9 0xe0c1 0xe0c1 sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A sio2: not probed (disabled) sio3: not probed (disabled) sn0: not probed (disabled) vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x7007f fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 50 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff EGA/VGA parameters to be used for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff vt0: not probed (disabled) isa_probe_children: probing PnP devices unknown: <PNP0401> can't assign resources (port) unknown: <PNP0401> at port 0x378-0x37f on isa0 unknown: <PNP0501> can't assign resources (port) unknown: <PNP0501> at port 0x3f8-0x3ff on isa0 unknown: <PNP0501> can't assign resources (port) unknown: <PNP0501> at port 0x2f8-0x2ff on isa0 unknown: <PNP0700> can't assign resources (port) unknown: <PNP0700> at port 0x3f2-0x3f5 on isa0 psmcpnp0: <PS/2 mouse port> at irq 12 on isa0 psm0: current command byte:0065 psm0: failed to reset the aux device. unknown: <PNP0303> can't assign resources (port) unknown: <PNP0303> at port 0x60 on isa0 speaker0: <PC speaker> at port 0x61 on isa0 Device configuration finished. Timecounter "TSC" frequency 1380008649 Hz quality -100 Timecounters tick every 1.000Couldn't get vector from ISR! msec lo0: bpf attached ata0-master: pio=0Couldn't get vector from ISR!x0c wdma=0x22 uCouldn't get vector from ISR!dma=0x45 caCouldn't get vector from ISR!ble=80pin ad0: setting UDMA100 on AMD 768 chip GEOM: creatCouldn't get vector from ISR!e disk ad0 dp=0Couldn't get vector from ISR!xc629e970 ad0:Couldn't get vector from ISR! <ST340810A/3.3Couldn't get vector from ISR!9> ATA-6 disk aCouldn't get vector from ISR!t ata0-master Couldn't get vector from ISR!ad0: 38166MB (7Couldn't get vector from ISR!8165360 sectorsCouldn't get vector from ISR!), 77545 C,Couldn't get vector from ISR! 16 H, 63 S, 512 BCouldn't get vector from ISR! ad0: 16 secs/int, 1 depth queue, UDMA100 GEOM: new disk ad0 Couldn't get vector from ISR!ata1-master: pio=0x0c wdma=0x22 udma=0x42 cable=40pin acd0: setting PICouldn't get vector from ISR!O4 on AMD 768 cCouldn't get vector from ISR!hip acd0: <TOSCouldn't get vector from ISR!HIBA CD-ROMCouldn't get vector from ISR! XM-6702B/1005> CDRCouldn't get vector from ISR!OM drive at ataCouldn't get vector from ISR!1 as masterCouldn't get vector from ISR! acd0: read 82Couldn't get vector from ISR!68KB/s (8268KB/s), 128KB buffer, PIO4 acd0: Reads: CDR, CDRW, CDDA stream acd0: Writes: acd0: Audio: play, 16 volume levels acd0: MechanCouldn't get vector from ISR!ism: ejectable Couldn't get vector from ISR!tray, unlockedCouldn't get vector from ISR! acd0: MediCouldn't get vector from ISR!um: no/blank disc SMP: AP CPU #1 Launched! cpu1 AP: ID: 0x01000000 VER: 0x00040010 LDR: 0x02000000 DFR: 0x0fffffff lint0: 0x00010700 lint1: 0x00010400 TPR: 0x00000000 SVR: 0x000001ff i[o0a]p ifc:08:0 rtoyupt:i1n6g5 isn(tCpHiSn) :10 /(1I/R1Q e1(CCHoSu)l:d1n0'2t3 /g2e5t4 /v6e3c tso:r6 3f rlo:m7 8I1S5R6!)1 6t2o c[l1u]s tfe:r0 00 t yipo:a0p si(cCHCSo)u:l0d/n0'/t0 gee(tC HvSe)c:t0o/r0 /f0r osm: 0I SlR:!00: r[o2u]t ifn:g0 0i nttyppi:n0 3s ((CIHRSQ) :03/)0 /t0o ec(lCuHsSt)e:r0 /00/ 0i osa:p0i cl0::0 r o[u3t]i nfg: 0i0n ttpyipn: 04 s((ICRHQS) :40)/ 0t/o0 cel(uCsHtSe)r: 00/0/ 0i osa:p0 ilc:00: routGiEnOgM :i nCtopnifni g6u r(eI RaQd 06s)1 ,t os tcalruts t3e2r2 506 lieonagptihc 04:0 0r1o5u9t5i4n9g4 4i netnpdi n4 070 1(5I9R8Q7 179)9 t o cluster 0 ioapic0: routing intpin 8 (IRQ 8) to cluster 0 ioapic0: routing intpin 13Couldn't get vector from ISR! (IRQ 13) to clCouldn't get vector from ISR!uster 0 ioapicCouldn't get vector from ISR!0: routing intpCouldn't get vector from ISR!in 14 (IRQ Couldn't get vector from ISR!14) to cluster Couldn't get vector from ISR!0 ioapic0: rouCouldn't get vector from ISR!ting intpin 15 (IRQ 15) to cluster 0 GEOM: Configure ad0s1a, start 0 length 268435456 end 268435455 GEOM: Configure ad0s1b, start 268435456 length 1052180480 end 1320615935 GEOM: Configure ad0s1c, start 0 length 40015954944 end 40015954943 GEOM: Configure ad0s1d, start 1320615936 length 268435456 end 1589051391 GEOM: Configure ad0s1e, start 1589051392 length 268435456 end 1857486847 GEOM: Configure ad0s1f, start 1857486848 length 38158468096 end 40015954943 Mounting root from ufs:/dev/ad0s1a start_init: trying /sbin/init xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xc400-0xc47f mem 0xf7000000-0xf700007f irq 18 at device 5.0 on pci2 pcib2: device xl0 requested decoded memory range 0xf7000000-0xf700007f xl0: using memory mapped I/O xl0: Ethernet address: 00:01:02:df:1c:b9 xl0: media options word: a xl0: found MII/AUTO xl0: bpf attached ioapic0: routing intpin 18 (IRQ 18) to cluster 0 miibus0: <MII bus> on xl0 xlphy0: <3c905C 10/100 internal PHY> on miibus0 xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto hatm0: <FORE HE> mem 0xf8000000-0xf80fffff irq 16 at device 8.0 on pci0 hatm0: carrier detected hatm0: bpf attached ioapic0: routing inCouldn't get vector from ISR!tpin 16 (IRQ 16) to cluster 0 hatm1: <FORE HE> mem 0xf6800000-0xf68fffff irq 17 at device 6.0 on pci2 pcib2: device hatm1 requested decoded memory range 0xf6800000-0xf68fffff hatm1: hw.hatm1.rbps1_size=4096 hatm1: hw.hatm1.rbps1_thresh=2048 hatm1: hw.hatm1.tpdrq_size=4096 hatm1: hw.hatm1.tpdmax=0 hatm1: hw.hatm1.max_mbuf_pages=2048 hatm1: hw.hatm1.mpsafe=1 hatm1: carrier detCouldn't get vector from ISR!ected hatm1: bpf attached ioapic0: routing intpin 17 (IRQ 17) to cluster 0 hatm2: <FORE HE> mem 0xf6000000-0xf60fffff irq 19 at device 8.0 on pci2 pcib2: device hatm2 requested decodCouldn't get vector from ISR!ed memory range 0xf6000000-0xf60fffff hatm2: hw.hatm2.rbps1_size=4096 hatm2: hw.hatm2.rbps1_thresh=2048 hatm2: hw.hatm2.tbrq0_size=8192 hatm2: hw.hatm2.tbrq0_thresh=6400 hatm2: hw.hatm2.tpdrq_sizeC=o4u0l9d6n 'hta tgme2t: vhewc.thoart mf2r.otmp dImSaRx!=0 hatm2: hw.hatm2.mpsafe=1 hatm2: carrier detected hatm2: bpf attached ioapic0: routing intpin 19 (IRQ 19) to cluster 0 hatm0: ForeRunnerHE 622, Rev. D, S/N 2949834, MAC=00:20:48:2d:02:ca (64bit PCI) hatm1: ForeRunnerHE 155, Rev. B, S/N 3026384, MAC=00:20:48:2e:2d:d0 (32bit PCI) hatm2: ForeRunnerHE 155, Rev. B, S/N 3027669, MAC=00:20:48:2e:32:d5 (32bit PCI) hatm0: txmbuf leaves 0
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20031105110813.J72398>