Skip site navigation (1)Skip section navigation (2)
Date:      Sat, 14 May 2005 11:47:16 +0100
From:      Matt <matt@mattford.net>
To:        freebsd-current@www.freebsd.org, freebsd-questions@www.freebsd.org
Subject:   System Crash when kldload if_ndis
Message-ID:  <4285D734.90400@mattford.net>

next in thread | raw e-mail | index | archive | help
I'm not sure if the problem I am having is with the kernel modules I am 
using (I've tried with two different ones) or with the ndis module 
itself or what. I am running FreeBSD 5.4 amd64 on an Asus A8V-E Deluxe 
motherboard, AMD 64 3000+, 512MB RAM. The ndis drivers I am using are 
for a Marvell 88E8053 gigabit ehternet controller and the onBoard wifi 
controller of the Asus A8V-E Deluxe (i'm not sure what the chipset is).

When using ndiscvt I get the error "section relocation failed". Other 
errors is when I am trying to ndiscvt the marvell driver I get the error:

ndiscvt: line 238: Controlled%: syntax error.

Here are the lines in the inf file:

237: HKR, Ndi\Params\WakeUpModeCap_A\enum,  0,,              %Non%
238: HKR, Ndi\Params\WakeUpModeCap_A\enum,  15,,             %OS Controlled%
239: HKR, Ndi\Params\WakeUpModeCap_A\enum,  25,,             %Magic Packet%

Basically I don't think it likes the spaces, so I went through the whole 
.inf deleting the spaces wherever it threw up a syntax error and in the 
end it compiled a kernel module that then crashed the system. I didn't 
get a chance to get the error when it crashed the system.

The wifi driver went through ndiscvt without any problems but when I try 
and kldload the wifi driver I get this error:

Fatal trap 12: page fault while in kernel mode
fault virtual address           = 0x96222d5b
fault code                      = supervisor read, page not present
instruction pointer             = 0x8:0xffffffff961e2466
stack pointer                   = 0x10:0xffffffff961d75d0
frame pointer                   = 0x10:096222d57
code segment                    = base 0x0, limit 0xfffff, type 0x1b
                                 = DPL 0, pres 1, long 1, def32 0, gran 1
processor eflags                = Interrupt enabled, resume, IOPL = 0
current process                 = 472 (kldload)
trap number                     = 12
panic: page fault

Other points to note is that I had to run the marvell .inf file through 
iconv with the -c flag to ignore characters it couldn't convert, this 
could possibly have left out some important data from the inf maybe?

I'll be gratefull for any suggestions



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4285D734.90400>