Date: Thu, 4 Mar 2004 14:13:59 -0800 (PST) From: Joshua W Harris <joharris2112@msn.com> To: freebsd-gnats-submit@FreeBSD.org Subject: i386/63776: FreeBSD 5.x freezes during boot on a toshiba p25 s509 series Message-ID: <200403042213.i24MDxTx032591@www.freebsd.org> Resent-Message-ID: <200403042220.i24MK90B071933@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 63776
>Category: i386
>Synopsis: FreeBSD 5.x freezes during boot on a toshiba p25 s509 series
>Confidential: no
>Severity: critical
>Priority: high
>Responsible: freebsd-i386
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: change-request
>Submitter-Id: current-users
>Arrival-Date: Thu Mar 04 14:20:08 PST 2004
>Closed-Date:
>Last-Modified:
>Originator: Joshua W Harris
>Release: 5.0 thru 5.2.1
>Organization:
>Environment:
unavailible
>Description:
My toshiba p25 s509 laptop freezes at boot even off the install cd's. I've tried using several different duplicate ( to insure it wasn't an iso bug)coppies of 5.x and all versions from 5.0 to the current 5.2.1 from ftp.freebsd.org ftp5.freebsd.org and ftp6.freebsd.org. None work. This machine is a dual boot the first partition is windows xp pro.
here is a paste from dmesg off the same machine after installing 4.9 stable.
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.9-RELEASE #0: Mon Oct 27 17:51:09 GMT 2003
root@freebsd-stable.sentex.ca:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz
CPU: Intel(R) Pentium(R) 4 CPU 2.80GHz (2793.02-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf29 Stepping = 9
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Hyperthreading: 2 logical CPUs
real memory = 536281088 (523712K bytes)
config> en pcic1
config> po pcic1 0x3e2
config> ir pcic1 0
config> iom pcic1 0xd4000
config> f pcic1 0
config> en sio3
config> po sio3 0x2e8
config> ir sio3 9
config> f sio3 0
config> en sio2
config> po sio2 0x3e8
config> ir sio2 5
config> f sio2 0
config> en ed0
config> po ed0 0x280
config> ir ed0 10
config> iom ed0 0xd8000
config> f ed0 0
config> q
avail memory = 516415488 (504312K bytes)
Preloaded elf kernel "kernel" at 0xc053f000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc053f09c.
Warning: Pentium 4 CPU: PSE disabled
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 10 entries at 0xc00fdf20
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
agp0: <Intel 82865 host to AGP bridge> mem 0xd0000000-0xdfffffff at device 0.0 on pci0
pcib1: <PCI to PCI bridge (vendor=8086 device=2571)> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <NVidia model 0324 graphics accelerator> at 0.0 irq 10
uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0x1800-0x181f irq 10 at device 29.0 on pci0
usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0x1820-0x183f irq 9 at device 29.1 on pci0
usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0x1840-0x185f irq 9 at device 29.2 on pci0
usb2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <Intel 82801EB (ICH5) USB controller USB-D> port 0x1860-0x187f irq 10 at device 29.3 on pci0
usb3: <Intel 82801EB (ICH5) USB controller USB-D> on uhci3
usb3: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
pci0: <USB controller> at 29.7 irq 9
pcib2: <Intel 82801BA/BAM (ICH2) Hub to PCI bridge> at device 30.0 on pci0
pci2: <PCI bus> on pcib2
fwohci0: vendor=104c, dev=8026
fwohci0: <1394 Open Host Controller Interface> mem 0xc2010000-0xc2013fff,0xc2014000-0xc20147ff irq 10 at device 0.0 on pci2
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channel is 4.
fwohci0: EUI64 00:02:3f:3c:39:00:06:1f
fwohci0: Phy 1394a available S400, 1 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
if_fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:02:3f:00:06:1f
sbp0: <SBP2/SCSI over firewire> on firewire0
fwohci0: Initiate bus reset
fwohci0: BUS reset
fwohci0: node_id=0xc000ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
rl0: <RealTek 8139 10/100BaseTX> port 0x3000-0x30ff mem 0xc2014800-0xc20148ff irq 10 at device 1.0 on pci2
rl0: Ethernet address: 00:02:3f:83:88:29
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci2: <unknown card> (vendor=0x168c, dev=0x0013) at 2.0 irq 9
pci_cfgintr_linked: linked (60) to hard-routed irq 10
pci_cfgintr: 2:4 INTA routed to irq 10
pcic0: <Toshiba ToPIC100 PCI-CardBus Bridge> irq 10 at device 4.0 on pci2
pcic0: PCI Memory allocated: 0x88000000
pccard0: <PC Card 16-bit bus (classic)> on pcic0
pci_cfgintr_linked: linked (61) to hard-routed irq 10
pci_cfgintr: 2:4 INTB routed to irq 10
pcic1: <Toshiba ToPIC100 PCI-CardBus Bridge> irq 10 at device 4.1 on pci2
pcic1: PCI Memory allocated: 0x88001000
pccard1: <PC Card 16-bit bus (classic)> on pcic1
pci2: <unknown card> (vendor=0x1179, dev=0x0805) at 6.0 irq 10
isab0: <PCI to ISA bridge (vendor=8086 device=24d0)> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH5 ATA100 controller> port 0x1880-0x188f,0-0x3,0-0x7,0-0x3,0-0x7 at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <unknown card> (vendor=0x8086, dev=0x24d3) at 31.3 irq 10
pci0: <unknown card> (vendor=0x8086, dev=0x24d5) at 31.5 irq 10
pci0: <unknown card> (vendor=0x8086, dev=0x24d6) at 31.6 irq 10
orm0: <Option ROMs> at iomem 0xc0000-0xcdfff,0xce000-0xcefff,0xdc000-0xdffff,0xe3000-0xe3fff on isa0
pmtimer0 on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
sio2: configured irq 5 not in bitmap of probed irqs 0
sio3: configured irq 9 not in bitmap of probed irqs 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppi0: <Parallel I/O> on ppbus0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ad0: 76319MB <HITACHI_DK23FA-80> [155061/16/63] at ata0-master UDMA100
acd0: DVD-R <MATSHITADVD-RAM UJ-811> at ata1-master PIO4
Mounting root from ufs:/dev/ad0s2a
>How-To-Repeat:
Attempt to Boot 5.x on any toshiba p25 s509 series laptop.
>Fix:
>Release-Note:
>Audit-Trail:
>Unformatted:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200403042213.i24MDxTx032591>