Date: Wed, 02 Jul 2003 06:35:21 +0700 From: Roger Merritt <mcrogerm@stjohn.ac.th> To: freebsd-questions@FreeBSD.ORG Cc: othermark <atkin901@yahoo.com> Subject: Re: BTX halted Message-ID: <5.2.0.9.0.20030702063002.00a21580@127.0.0.1> In-Reply-To: <slrnbg3o02.n01.atkin901@adkinson245.f5net.com> References: <5.2.0.9.0.20030701084316.00a24500@127.0.0.1>
next in thread | previous in thread | raw e-mail | index | archive | help
At 02:24 AM 7/2/03, you wrote: >In article <5.2.0.9.0.20030701084316.00a24500@127.0.0.1>, Roger Merritt wrote: > > > > BTX Loader 1.00 BTX version is 1.01 > > > > int=00000006 err=00000000 efl=00010246 eip=00001934 > > eax=00021d60 ebx=00000000 ecx=00000000 edx=ffffffff > > esi=00000000 edi=00020c34 ebp=00094bec esp=00094bdc > > cs=0026 db=0033 es=0033 fs=0033 gs=0033 ss=0033 > > cs:eip=0f 44 d6 89 55 fc 46 83-2c b7 00 74 05 83 fa ff > > ss:esp=00 00 00 00 00 00 00 00-00 00 00 00 ff ff ff ff > > BTX halted > > > >did you try a hard power reset after this message? I have an old >IBM intellistation that does the same thing with 5.x. After I install >I get the BTX halted, but if I cold boot it after the message it >will boot. Well, not exactly. I'll give it a try. I *did* try just hitting the reset button and that didn't make any change. I also turned off the power, removed the hard drive, took it back to its original box, booted up, recompiled the kernel, brought it back to the new(er) box and plugged it back in, and powered up. I also tried booting up with floppies (succeeded) and tried running 'fdisk -B ad0' to try to replace the MBR, but that had no effect. I've tried it on a third, even older box, which I'm running FreeBSD on, and it wouldn't boot up there either -- same error. -- Roger
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?5.2.0.9.0.20030702063002.00a21580>