Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 5 Jul 2010 22:02:53 -0700
From:      Jack Vogel <jfvogel@gmail.com>
To:        "Yuriy A. Korobko" <administrator@shtorm.com>
Cc:        freebsd-net@freebsd.org
Subject:   Re: Intel 82574L Gigabit Ethernet Controller
Message-ID:  <AANLkTilVYjuRGtE3gtcRhxIS4FBEAkiBqEPcxCgBh2Hk@mail.gmail.com>
In-Reply-To: <1278356796.10826.35.camel@stormi-desktop>
References:  <1278330234.10826.18.camel@stormi-desktop> <AANLkTinePfVRKHdd5FHXEA1YXW9NvDo8mz48hoBgkZ9c@mail.gmail.com> <1278356796.10826.35.camel@stormi-desktop>

next in thread | previous in thread | raw e-mail | index | archive | help
Cleaner in the Makefile, let me know how it goes.

Jack


On Mon, Jul 5, 2010 at 12:06 PM, Yuriy A. Korobko
<administrator@shtorm.com>wrote:

> On Mon, 2010-07-05 at 11:11 -0700, Jack Vogel wrote:
> > Are  you defining 'EM_MULTIQUEUE', its off by default and needs to be
> > defined somewhere by you.
> >
> > You will only see the two queues used if you have two different
> connections
> > operating at once.
> >
> > Jack
> >
> >
> > On Mon, Jul 5, 2010 at 4:43 AM, Shtorm <admin@shtorm.com> wrote:
> >
> > > I just got Supermicro SuperServer 5016I-MRF server with two 82574L
> > > controllers on board. According to specs this controller can do two
> > > msi-x vectors for tx and rx, but only one tx-rx pair is used on
> > > 8.1-prerelease.
> > >
>
> Thanks for you reply Jack,
>
> This box working as a router with up to 60 kpps traffic rate , I believe
> there is enough flows to see both queues running.
>
> # netstat -I em0 -w 1
>            input          (em0)           output
>   packets  errs idrops      bytes    packets  errs      bytes colls
>     60356     0     0   61659974      46803     0   15527523     0
>     56273     0     0   56429189      44278     0   15199658     0
>     55405     0     0   55408969      43654     0   14978427     0
>
> Anyway, will try to rebuild em module with
>
> CFLAGS += -DEM_MULTIQUEUE
>
> and with LEGACY stuff commented out in src/sys/modules/em/Makefile
> tomorrow.
>
> Is this enough or should I put define in the beginning of
> src/sys/dev/e1000/if_em.c ?
>
>
>
>
>
>



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?AANLkTilVYjuRGtE3gtcRhxIS4FBEAkiBqEPcxCgBh2Hk>