Date: Thu, 1 Feb 2007 18:37:37 +0300 (MSK) From: "Igor V. Ruzanov" <igorr@canmos.ru> To: questions@FreeBSD.org Subject: NeedHelp Message-ID: <Pine.LNX.4.64.0702011806590.7391@sta1.canmos.ru>
next in thread | raw e-mail | index | archive | help
Hello!
I have installed FreeBSD 6.1-RELEASE onto server machine with
ASUS P5RD1-VM mainboard. There is network interface card integrated
(nic) into the mainboard and this nic based on ULi-M526X chipset that is
not determined under FreeBSD. Is there some workaround with ULi-M526X nic
to make this nic operable? Or maybe i have to upgarde system to FreeBSD
6.2-RELEASE?
There are several system configurations that could be helpfull for you:
1) Kernel options with respect to FastEthernet support:
=======================================================
# PCI Ethernet NICs that use the common MII bus controller code.
# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
device miibus # MII bus support
device bce # Broadcom BCM5706/BCM5708 Gigabit Ethernet
device bfe # Broadcom BCM440x 10/100 Ethernet
device bge # Broadcom BCM570xx Gigabit Ethernet
device dc # DEC/Intel 21143 and various workalikes
device fxp # Intel EtherExpress PRO/100B (82557, 82558)
device lge # Level 1 LXT1001 gigabit Ethernet
device nge # NatSemi DP83820 gigabit Ethernet
device nve # nVidia nForce MCP on-board Ethernet Networking
device pcn # AMD Am79C97x PCI 10/100(precedence over 'lnc')
device re # RealTek 8139C+/8169/8169S/8110S
device rl # RealTek 8129/8139
device sf # Adaptec AIC-6915 (``Starfire'')
device sis # Silicon Integrated Systems SiS 900/SiS 7016
device sk # SysKonnect SK-984x & SK-982x gigabit Ethernet
device ste # Sundance ST201 (D-Link DFE-550TX)
device ti # Alteon Networks Tigon I/II gigabit Ethernet
device tl # Texas Instruments ThunderLAN
device tx # SMC EtherPower II (83c170 ``EPIC'')
device vge # VIA VT612x gigabit Ethernet
device vr # VIA Rhine, Rhine II
device wb # Winbond W89C840F
device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'')
2) PCI channels configurations:
===============================
hostb0@pci0:0:0: class=0x060000 card=0x819a1043 chip=0x5a331002 rev=0x01 hdr=0x00
vendor = 'ATI Technologies Inc'
class = bridge
subclass = HOST-PCI
pcib1@pci0:1:0: class=0x060400 card=0x000000b0 chip=0x5a3f1002 rev=0x00 hdr=0x01
vendor = 'ATI Technologies Inc'
class = bridge
subclass = PCI-PCI
pcib2@pci0:25:0: class=0x060400 card=0x000000c0 chip=0x524910b9 rev=0x00 hdr=0x01
vendor = 'Acer Labs Incorporated (ALi)'
device = 'M5249 HyperTransport to PCI Bridge'
class = bridge
subclass = PCI-PCI
none0@pci0:27:0: class=0x020000 card=0x816a1043 chip=0x526310b9 rev=0x50 hdr=0x00
vendor = 'Acer Labs Incorporated (ALi)'
class = network
subclass = ethernet
isab0@pci0:30:0: class=0x060100 card=0x80561043 chip=0x157310b9 rev=0x31 hdr=0x00
vendor = 'Acer Labs Incorporated (ALi)'
class = bridge
subclass = PCI-ISA
none1@pci0:30:1: class=0x068000 card=0x80561043 chip=0x710110b9 rev=0x00 hdr=0x00
vendor = 'Acer Labs Incorporated (ALi)'
device = 'ALI M7101 Power Management Controller'
class = bridge
atapci0@pci0:31:0: class=0x01018a card=0x80561043 chip=0x522910b9 rev=0xc7 hdr=0x00
vendor = 'Acer Labs Incorporated (ALi)'
device = 'M1543 Southbridge EIDE Controller'
class = mass storage
subclass = ATA
none2@pci1:5:0: class=0x030000 card=0x819a1043 chip=0x5a611002 rev=0x00 hdr=0x00
vendor = 'ATI Technologies Inc'
class = display
subclass = VGA
skc0@pci2:19:0: class=0x020000 card=0x952111ab chip=0x432011ab rev=0x12 hdr=0x00
vendor = 'Marvell Semiconductor (Was: Galileo Technology Ltd)'
device = '88E8001/8003/8010 Gigabit Ethernet Controller with Integrated PHY (copper)'
class = network
subclass = ethernet
fxp0@pci2:20:0: class=0x020000 card=0x00098086 chip=0x12298086 rev=0x05 hdr=0x00
vendor = 'Intel Corporation'
device = '82550/1/7/8/9 EtherExpress PRO/100(B) Ethernet Adapter'
class = network
subclass = ethernet
PS I tried to `kldload' to loade a module that i got from my friends so
ndis0 interface was created. But when i assigned network to ndis0, my
system was crashed.
Thank you for your help!
+-------------------------------------------+
! CANMOS ISP Network !
+-------------------------------------------+
! Best regards !
! Igor V. Ruzanov, network operational staff!
! e-Mail: igorr@canmos.ru !
+-------------------------------------------+
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.LNX.4.64.0702011806590.7391>