Date: Sun, 29 May 2005 13:26:34 GMT From: Gerrit Kühn <gerrit@pmp.uni-hannover.de> To: freebsd-gnats-submit@FreeBSD.org Subject: usb/81621: external hd hangs under load on ehci Message-ID: <200505291326.j4TDQYCh084810@www.freebsd.org> Resent-Message-ID: <200505291330.j4TDU2eZ042857@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 81621 >Category: usb >Synopsis: external hd hangs under load on ehci >Confidential: no >Severity: non-critical >Priority: low >Responsible: freebsd-usb >State: open >Quarter: >Keywords: >Date-Required: >Class: sw-bug >Submitter-Id: current-users >Arrival-Date: Sun May 29 13:30:02 GMT 2005 >Closed-Date: >Last-Modified: >Originator: Gerrit Kühn >Release: 5-stable >Organization: Universität Hannover >Environment: root@stardust.terra.ger:/usr/obj/usr/src/sys/STARDUST iFreeBSD stardust.terra.ger 5.4-STABLE FreeBSD 5.4-STABLE #25: Sat May 7 22:22:04 CEST 2005 root@stardust.terra.ger:/usr/obj/usr/src/sys/STARDUST i386 386 >Description: I'm using a Vosoniq XS-DrivePro VP-300, which is basically an external 2.5"HD combined with a cardreader. The device works perfectly with 500-600kB/s when connected to the internal USB1 port of the mainboard (VIA chipset), and basically works with ~2MB/s on a USB2 port of a DLink DU-520 card (NEC chipset). However, after transferring some data via USB2/EHCI (usually some 10MB), the connection locks up and waits for some kind of timeout (several minutes). After that, transfer is resumed until the next lockup occurs. uhci0@pci0:7:2: class=0x0c0300 card=0x12340925 chip=0x30381106 rev=0x16 hdr=0x00 vendor = 'VIA Technologies Inc' device = 'VT82xxxxx UHCI USB 1.1 Controller (All VIA Chipsets)' class = serial bus subclass = USB uhci1@pci0:7:3: class=0x0c0300 card=0x12340925 chip=0x30381106 rev=0x16 hdr=0x00 vendor = 'VIA Technologies Inc' device = 'VT82xxxxx UHCI USB 1.1 Controller (All VIA Chipsets)' class = serial bus subclass = USB ohci0@pci0:14:0: class=0x0c0310 card=0x00351186 chip=0x00351033 rev=0x43 hdr=0x00 vendor = 'NEC Electronics Hong Kong' device = 'uPD9210FGC-7EA / µPD720101 USB 1.0 Host Controller (OHCI compliant)' class = serial bus subclass = USB ohci1@pci0:14:1: class=0x0c0310 card=0x00351186 chip=0x00351033 rev=0x43 hdr=0x00 vendor = 'NEC Electronics Hong Kong' device = 'uPD9210FGC-7EA / µPD720101 USB 1.0 Host Controller (OHCI compliant)' class = serial bus subclass = USB ehci0@pci0:14:2: class=0x0c0320 card=0xf1011186 chip=0x00e01033 rev=0x04 hdr=0x00 vendor = 'NEC Electronics Hong Kong' device = 'uPD720100A/101 USB 2.0 Enhanced Host Controller' class = serial bus subclass = USB Please let me know if I can provide further information to solve this problem. >How-To-Repeat: Just use the XS-Drive with USB2 and transfer an sufficient amount of data. >Fix: >Release-Note: >Audit-Trail: >Unformatted:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200505291326.j4TDQYCh084810>