Date: Sun, 17 Jan 2016 17:04:44 -0700 From: Warner Losh <imp@bsdimp.com> To: Stanislav Galabov <sgalabov@gmail.com> Cc: "freebsd-mips@freebsd.org" <freebsd-mips@freebsd.org>, "freebsd-arm@freebsd.org" <freebsd-arm@freebsd.org> Subject: Re: SPI geom_flashmap/fdt_slicer support, FDT 'resets=' support and a move of ohci_fdt.c Message-ID: <CANCZdfrt-EdzFuXFSP2sTAX2vxP_RKAamKgUeL0u7hZYxeOF_A@mail.gmail.com> In-Reply-To: <B4B24B7D-B3EE-4F37-9E89-24FF17294C70@gmail.com> References: <B4B24B7D-B3EE-4F37-9E89-24FF17294C70@gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
I don't see how resets help. Maybe I missed where it was documented, could you send that to me? Even with that, it seems that a generic ohci_fdt driver isn't possible. Warner On Thu, Jan 14, 2016 at 2:01 AM, Stanislav Galabov <sgalabov@gmail.com> wrote: > Hi all, > > First off, sorry for the cross-post, I wasn=E2=80=99t very sure where thi= s should > go=E2=80=A6 > > I=E2=80=99ve created 3 PRs, which enable some functionality that my work = on > Ralink/Mediatek SoCs would benefit from. > > 1. https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=3D206227 > - This enables geom_flashmap and fdt_slicer support for SPI flash chips > supported by the mx25l driver (sys/dev/flash/mx25l.c) > > 2. https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=3D206228 > - This adds support for FDT =E2=80=98resets=3D=E2=80=99 property in much = the same way as ian@=E2=80=99s > sys/dev/fdt/fdt_clock* supports FDT =E2=80=98clocks=3D=E2=80=98 property.= In fact this work > is basically a modified version of fdt_clock* :-) > > 3. https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=3D206229 > - This simply moves the at91 specific sys/dev/usb/controller/ohci_fdt.c t= o > sys/dev/usb/controller/at91ohci_fdt.c (and changes the filename in > sys/arm/at91/files.at91 as well). The current naming is misleading IMHO a= nd > also, I have some (vague-ish) plans to see if I can implement generic > ohci_fdt and ehci_fdt based on dwc_otg_fdt, so that systems with standard > ehci/ohci controllers can reuse these. > > Patches are attached to the PRs. > > I would appreciate any feedback on the PRs and would also appreciate it i= f > someone could commit these if the proposed changes are appropriate. > > Best wishes, > Stanislav > _______________________________________________ > freebsd-arm@freebsd.org mailing list > https://lists.freebsd.org/mailman/listinfo/freebsd-arm > To unsubscribe, send any mail to "freebsd-arm-unsubscribe@freebsd.org"
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CANCZdfrt-EdzFuXFSP2sTAX2vxP_RKAamKgUeL0u7hZYxeOF_A>