Date: Sat, 3 Feb 2007 15:19:27 +0100 From: Michel TALON <talon@lpthe.jussieu.fr> To: freebsd-mobile@freebsd.org Subject: RE: Sony Vaio VGN C1 Message-ID: <20070203141927.GA24449@lpthe.jussieu.fr>
next in thread | raw e-mail | index | archive | help
Mon, 29 Jan 2007 i wrote:
> the agp support does not detect the video card, as a consequence i
> don't have Xvideo support, nor hardware opengl
This problem is in fact solved in the 6-STABLE version of agp/i810.c
which adds support for chip 0x27a28086. As a consequence the main remaining
problem on this laptop is solved. Note this brings XVideo support, but
harware OpenGL still does not work for an unknown reason. Xorg.0.log reports
(II) I810(0): [drm] installed DRM signal handler
(II) I810(0): [DRI] installation complete
(II) I810(0): direct rendering: Enabled
but glxinfo reports:
name of display: :0.0
display: :0 screen: 0
direct rendering: No
and glxgears produces crap results.
For the convenience of people who could be tempted to buy the same laptop
(i find it very nice, and not overpriced), here is dmesg, with, i hope, all
hardware detected - note there is a pccard controller, but no pccard slot,
only flash card slots, controlled by pccard. Also the touchpad is recognised
as an Alps touchpad under Linux with all sorts of functions, here it acts
as a standard mouse, tapping has no effect:
rose% dmesg
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-RELEASE #1: Sat Feb 3 12:51:15 UTC 2007
michel@rose:/usr/src/sys/i386/compile/ROSE
ACPI APIC Table: <SONY J4>
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Core(TM)2 CPU T5500 @ 1.66GHz (1662.51-MHz 686-class
CPU)
Origin = "GenuineIntel" Id = 0x6f6 Stepping = 6
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0xe39d<SSE3,RSVD2,MON,DS_CPL,EST,TM2,<b9>,CX16,<b14>,<b15>>
AMD Features=0x20100000<NX,LM>
AMD Features2=0x1<LAHF>
Cores per package: 2
real memory = 1063845888 (1014 MB)
avail memory = 1031860224 (984 MB)
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ioapic0: Changing APIC ID to 1
ioapic0 <Version 2.0> irqs 0-23 on motherboard
acpi0: <SONY> on motherboard
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x17> port 0x62,0x66 on acpi0
cpu0: <ACPI CPU> on acpi0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <Intel 82945GM (945GM GMCH) SVGA controller> port 0x1800-0x1807 mem
0xd0100000-0xd017ffff,0xb0000000-0xbfffffff,0xd0200000-0xd023ffff irq 16 at
device 2.0 on pci0
agp0: detected 7932k stolen memory
agp0: aperture size is 256M
pci0: <display> at device 2.1 (no driver attached)
pcm0: <Intel 82801G High Definition Audio Controller> mem
0xd0240000-0xd0243fff irq 22 at device 27.0 on pci0
pcib1: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib1
myk0: <Marvell 88E8036 Fast Ethernet Controller, Ver. 8.12.2.3> port
0x2000-0x20ff mem 0xc8000000-0xc8003fff irq 16 at device 0.0 on pci2
myk0: Ethernet address: 00:13:a9:60:a1:5c
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.1 on pci0
pci4: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0
pci6: <ACPI PCI bus> on pcib3
wpi0: <Intel(R) PRO/Wireless 3945ABG> mem 0xcc000000-0xcc000fff irq 18 at
device 0.0 on pci6
bus_dmamem_alloc failed to align memory properly.
bus_dmamem_alloc failed to align memory properly.
bus_dmamem_alloc failed to align memory properly.
bus_dmamem_alloc failed to align memory properly.
bus_dmamem_alloc failed to align memory properly.
bus_dmamem_alloc failed to align memory properly.
bus_dmamem_alloc failed to align memory properly.
wpi0: Ethernet address: 00:18:de:ad:78:b1
wpi0: [GIANT-LOCKED]
wpi0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
wpi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
wpi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps
36Mbps 48Mbps 54Mbps
pcib4: <ACPI PCI-PCI bridge> irq 21 at device 28.3 on pci0
pci8: <ACPI PCI bus> on pcib4
uhci0: <UHCI (generic) USB controller> port 0x1820-0x183f irq 23 at device
29.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0x1840-0x185f irq 17 at device
29.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <UHCI (generic) USB controller> port 0x1860-0x187f irq 18 at device
29.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <UHCI (generic) USB controller> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <UHCI (generic) USB controller> port 0x1880-0x189f irq 16 at device
29.3 on pci0
uhci3: [GIANT-LOCKED]
usb3: <UHCI (generic) USB controller> on uhci3
usb3: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0xd0444000-0xd04443ff
irq 23 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <Intel 82801GB/R (ICH7) USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci10: <ACPI PCI bus> on pcib5
cbb0: <PCI-CardBus Bridge> at device 3.0 on pci10
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
fwohci0: <1394 Open Host Controller Interface> mem
0xd0005000-0xd00057ff,0xd0000000-0xd0003fff irq 16 at device 3.1 on pci10
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 08:00:46:03:02:3a:b2:56
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: node_id=0xc000ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
pci10: <mass storage> at device 3.2 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH7 UDMA100 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1810-0x181f at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
atapci1: <Intel ICH7M SATA300 controller> port
0x18d0-0x18d7,0x18c4-0x18c7,0x18c8-0x18cf,0x18c0-0x18c3,0x18b0-0x18bf mem
0xd0444400-0xd04447ff irq 19 at device 31.2 on pci0
ata2: <ATA channel 0> on atapci1
ata3: <ATA channel 1> on atapci1
ichsmb0: <SMBus controller> port 0x18e0-0x18ff irq 19 at device 31.3 on pci0
ichsmb0: [GIANT-LOCKED]
smbus0: <System Management Bus> on ichsmb0
smb0: <SMBus generic I/O> on smbus0
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
acpi_sony0: <Sony notebook controller> on acpi0
acpi_sony0: PID 0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model GlidePoint, device ID 0
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem
0xc0000-0xcffff,0xdc000-0xdffff,0xe0000-0xe17ff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
ums0: Mitsumi Mitsumi Quick Scroll Mouse (USB), rev 1.00/1.10, addr 2, iclass
3/1
ums0: 3 buttons and Z dir.
Timecounters tick every 1.000 msec
acd0: DVDR <PIONEER DVD-RW DVR-K16M/1.00> at ata0-master UDMA33
ad4: 95396MB <HTS541010G9SA00 MBZOC60R> at ata2-master SATA150
pcm0: <HDA Codec: Realtek (Unknown)>
pcm0: <HDA Driver Revision: 20070105_0038>
SMP: AP CPU #1 Launched!
cd0 at ata0 bus 0 target 0 lun 0
cd0: <PIONEER DVD-RW DVR-K16M 1.00> Removable CD-ROM SCSI-0 device
cd0: 33.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
Trying to mount root from ufs:/dev/ad4s4a
drmsub0: <Intel i945GM>: (child of agp_i810.c) on agp0
info: [drm] AGP at 0xd0100000 0MB
info: [drm] Initialized i915 1.4.0 20060119
--
Michel TALON
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20070203141927.GA24449>