Date: Sun, 24 Oct 1999 22:47:52 +0200 From: Fredrik Carlen <fredrik.carlen@telia.com> To: freebsd-questions@freebsd.org Subject: Musician with Sound problems Message-ID: <99102423075800.00533@orcslayer.leonis.net>
next in thread | raw e-mail | index | archive | help
It seems like a whole lotta people have troubles getting their soundcards to work on this mailing list, and to be frank, so have I. I'm not expecting someone to solve my problems, just gimme something to work with. I _have_ read all of the sound related stuff in "The complete FreeBSD", so I think I need something else... The sound related stuff in dmesg is : "sb0 at 0x220 irq 5 drq 1 on isa Hmm... Could this be an ESS688 based card (rev 11) NOTE! SB Pro support required with your soundcard! snd0: <SoundBlaster Pro 3.1> " My kernel config file has this stuff in it, which i think should be appropriate: "controller snd0 device sb0 at isa? port 0x220 irq 5 drq 1" When I recently played a system sound, I got a small beep (not from the system speaker, but really from the speakers attached to the sound board) and a bunch of errors saying: "Sound: DMA (output) timed out - IRQ/DRQ config error? Sound: DMA (output) timed out - IRQ/DRQ config error? Sound: DMA (output) timed out - IRQ/DRQ config error? Sound: DMA (output) timed out - IRQ/DRQ config error? Sound: DMA (output) timed out - IRQ/DRQ config error? Sound: DMA (output) timed out - IRQ/DRQ config error? Sound: DMA (output) timed out - IRQ/DRQ config error? Sound: DMA (output) timed out - IRQ/DRQ config error? [...I think you've gotten _that_ by now!]" The following error used to pop up when I start X, but this no longer happens(!): "maudio: cannot open audio device" (Like I said, I don't get this now...for some reason...) I have tried, in /dev/ : "# ./MAKEDEV snd0" ...but when I then proceed to: "# ls -l | grep snd0" , snd0 isn't there! How can this be? When I recently played a system sound, I got a small beep and abunch of errors saying: "Sound: DMA (output) timed out - IRQ/DRQ config error? Sound: DMA (output) timed out - IRQ/DRQ config error? Sound: DMA (output) timed out - IRQ/DRQ config error? Sound: DMA (output) timed out - IRQ/DRQ config error? Sound: DMA (output) timed out - IRQ/DRQ config error? Sound: DMA (output) timed out - IRQ/DRQ config error? Sound: DMA (output) timed out - IRQ/DRQ config error? Sound: DMA (output) timed out - IRQ/DRQ config error? [...and so on, and so on...]" The _whole_ of "$ startx >Xserver_output 2>&1" comes here: "XFree86 Version 3.3.3.1 / X Window System (protocol Version 11, revision 0, vendor release 6300) Release Date: December 29 1998 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. (see http://www.XFree86.Org/FAQ) Operating System: FreeBSD 3.0-CURRENT i386 [ELF] Configured drivers: S3: accelerated server for S3 graphics adaptors (Patchlevel 0) newmmio, mmio_928, s3_generic Using syscons driver with X support (version 2.0) (using VT number 4) XF86Config: /etc/XF86Config (**) stands for supplied, (--) stands for probed/default values (**) XKB: rules: "xfree86" (**) XKB: model: "pc101" (**) XKB: layout: "se" (**) Mouse: type: Microsoft, device: /dev/mouse, baudrate: 1200 (**) Mouse: buttons: 3 (**) S3: Graphics device ID: "Primary Card" (**) S3: Monitor ID: "Primary Monitor" Warning: The directory "/usr/X11R6/lib/X11/fonts/local" does not exist. Entry deleted from font path. (**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc:unscaled,/usr/X11R6/lib/X11/fonts/75dpi:unscaled,/usr/X11R6/lib/X11/fonts/100dpi:unscaled,/usr/X11R6/lib/X11/fonts/Type1,/usr/X11R6/lib/X11/fonts/Speedo,/usr/X11R6/lib/X11/fonts/misc,/usr/X11R6/lib/X11/fonts/75dpi,/usr/X11R6/lib/X11/fonts/100dpi" (--) S3: PCI: Trio32/64 rev 54, Linear FB @ 0xe0000000 (--) S3: chipset: Trio64V+ rev. 54 (--) S3: chipset driver: newmmio (--) S3: card type: PCI (**) S3: videoram: 1024k (--) S3: Ramdac type: s3_trio64 (--) S3: Ramdac speed: 135 MHz (--) S3: Using Trio32/64 programmable clock (MCLK 52.500 MHz) (--) S3: Maximum allowed dot-clock: 95.000 MHz (**) S3: Mode "800x600": mode clock = 50.000 (**) S3: Using 16 bpp. Color weight: 565 (--) S3: Virtual resolution set to 800x600 (--) S3: Local bus LAW is 0xE0000000 (--) S3: Using a banksize of 1024k, line width of 800 (--) S3: Using a single 54x54 area at (746,601) for expanding pixmaps (--) S3: Using 16 planes of 746x54 at (0,601) aligned 8 as font cache KCharset: Wrong charset! maudio OSS Error: 5 maudio OSS Error: 5 maudio OSS Error: 5 KCharset: Wrong charset!" I am really grateful for all the help I can get, and I am going start with recompiling with another set of IRQ/DRQ's /Fredrik ("What am I - a musician or a computer software engineer?") Carlen To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?99102423075800.00533>