Date: Fri, 27 May 2011 04:12:12 +0800 From: Adrian Chadd <adrian@freebsd.org> To: Dalibor Gudzic <dalibor.gudzic@gmail.com> Cc: freebsd-wireless@freebsd.org, bug-followup@freebsd.org Subject: Re: kern/140796: [ath] [panic] Cannot attach (unable to attach hardware; HAL status 3) under 8, panic in 7.x Message-ID: <BANLkTinXxmMUXRhx671cJHThq=7jv9JWpA@mail.gmail.com> In-Reply-To: <BANLkTinkMbiJvXmeRHB5AJh-uS8_wSfPLw@mail.gmail.com> References: <BANLkTinHWvxu_NKbf8DuphKX1Qy3u_O=oA@mail.gmail.com> <BANLkTinkMbiJvXmeRHB5AJh-uS8_wSfPLw@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Nope, you need to use cloned devices, not ath0. ifconfig wlan0 create wlandev ath0 country Australia then do your stuff to wlan0, not ath0. :) Adrian On 27 May 2011 04:11, Dalibor Gudzic <dalibor.gudzic@gmail.com> wrote: > On Thu, May 26, 2011 at 9:21 PM, Dalibor Gudzic > <dalibor.gudzic@gmail.com> wrote: >>> On Tue, May 24, 2011 at 2:29 PM, Adrian Chadd <adrian@freebsd.org> wrot= e: >>> >>> Have you tried freebsd-current? I've done quite a bit of work with the >>> ath driver in FreeBSD-current. >> >> Just did. It appears that card is working in HEAD, at least there are >> no failed messages. Here is the dmesg: >> ... > > Unfortunately, I cannot do anything with the card. I can 'up' it, but > when I try to assign an address to it I get: > > =A0 =A0 =A0ifconfig: ioctl (SIOCAIFADDR): Invalid argument > > ifconfig arguments were fine, everything is OK with vr0 interace. If I > try tcpdump on ath0 I get: > > =A0 =A0 =A0tcpdump: ath0: No such device exists > =A0 =A0 =A0(BIOCSETIF failed: Device not configured) > > > I guess I started to celebrate to early... :) > > > Dalibor >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?BANLkTinXxmMUXRhx671cJHThq=7jv9JWpA>