Date: Wed, 31 May 2000 10:18:35 -0500 From: Ryugen@palaver.org (Ryugen C. Fisher) To: Dan Harnett <danh@wzrd.com> Cc: freebsd-questions@freebsd.org Subject: Re: Using radius to NT server? Message-ID: <4.3.1.2.20000531101436.00a95800@mail.palaver.org> In-Reply-To: <20000531104132.A2010@mail.wzrd.com> References: <20000525181709.C2615@coreyx.net-tech.com.au> <20000525181709.C2615@coreyx.net-tech.com.au>
next in thread | previous in thread | raw e-mail | index | archive | help
IIRC the port 1645 for Radius is the port that is used by Livingston for there Portmaster Routers, etc. Livingston (now a div of AT&T) is the shop where Radius was first drafted, written and implemented. As a result most "older" radius software and hardware use the 1645 port... I have not read the RFC and would frankly be curious as to how the port got changed from the "factory' spec to port 1812. At 09:41 AM 5/31/00, you wrote: >Hello, > >On Thu, May 25, 2000 at 06:17:09PM +1000, Corey Ralph wrote: > > Hi. > > > > I am attempting to set up a freebsd 4.0 box for a ppp dialin server. I am > > using mgetty and pppd 2.3.10 with the radius patch. > > > > The problem is with the radius. Our radius server is NT, it doesn't > seem to > > respond. > > > > pppd is reporting 'RADIUS: No valid RADIUS responses recieved'. > > > > Possibly a compatibility issue? I have been told that there is something > > non-standard in the NT radius server, our 3com boxes need to be configured > > differently to use it. > > > >You might want to check what port the radius server is listening on. By >default, FreeBSD uses the port defined in the RFC, udp port 1812. A lot of >equipment and vendors use a non-standard port, usually 1645. Take a look at >radius.conf(5) for how to make use of it. > >-- > Dan Harnett Wizard Communication Systems, > Inc. > Email: danh@wzrd.com 2 Main Street > Phone: (716) 743-0091 Tonawanda, NY 14150 > > >To Unsubscribe: send mail to majordomo@FreeBSD.org >with "unsubscribe freebsd-isp" in the body of the message Ryugen, that "Old Frog" hisself Ryugen@palaver.org To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4.3.1.2.20000531101436.00a95800>