Date: Tue, 12 Jun 2001 10:25:52 +1200 From: Jonathan Chen <jonathan.chen@itouch.co.nz> To: freebsd-ports@freebsd.org Subject: XFree86 4.1.0 and the i810e Message-ID: <20010612102551.B4247@itouchnz.itouch>
next in thread | raw e-mail | index | archive | help
--vkogqOf2sHV7VnPd
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
Hi y'all.
I recently cvsup'd XFree86-4.1.0 and managed to get it built after some
help (bad, bad libXft.so). Anyway I installed it, and it then didn't
want to start up for my i810e machine due to unresolved errors for
"XAAFillSolidRects", "fbPictureInit".
Fiddling with the config file, I've got past that error by adding:
Load "xaa"
Load "fb"
But now it just fails with a seg-fault (see attached error log).
Has anyone got XFree86-4.1.0 working for the i810e on a Dell OptiPlex?
Can I have the necessary incantations to get this working?
Cheers
--
Jonathan Chen <jonathan.chen@itouch.co.nz>
----------------------------------------------------------------------
Experience is a hard teacher
because she gives the test first, the lesson afterwards
--vkogqOf2sHV7VnPd
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment; filename=err
XFree86 Version 4.1.0 / X Window System
(protocol Version 11, revision 0, vendor release 6510)
Release Date: 2 June 2001
If the server is older than 6-12 months, or if your card is
newer than the above date, look for a newer version before
reporting problems. (See http://www.XFree86.Org/FAQ)
Build Operating System: FreeBSD 4.3-STABLE i386 [ELF]
Module Loader present
(==) Log file: "/var/log/XFree86.0.log", Time: Mon Jun 11 09:24:51 2001
(==) Using config file: "/etc/X11/XF86Config"
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) ServerLayout "simple layout"
(**) |-->Screen "Screen 1" (0)
(**) | |-->Monitor "Dell P991"
(**) | |-->Device "i810"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(**) FontPath set to "/usr/X11R6/lib/X11/fonts/local/,/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/CID/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(--) Using syscons driver with X support (version 2.0)
(--) using VT number 9
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 0.1.0
(II) Loading /usr/X11R6/lib/modules/libscanpci.a
(II) Module scanpci: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 0.1.0
(II) Unloading /usr/X11R6/lib/modules/libscanpci.a
(--) PCI:*(0:1:0) Intel i810e rev 3, Mem @ 0xf4000000/26, 0xff000000/19
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/drivers/i810_drv.o
(II) Module i810: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
(II) I810: Driver for Intel i810 chipset: i810, i810-dc100, i810e, i815
(--) Assigning device section with no busID to primary device
(--) Chipset i810e found
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 0.1.0
(**) I810(0): Depth 8, (--) framebuffer bpp 8
(==) I810(0): Default visual is PseudoColor
(II) Loading /usr/X11R6/lib/modules/libvbe.a
(II) Module vbe: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/libint10.a
(II) Module int10: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
(II) I810(0): initializing int10
(==) I810(0): Write-combining range (0xa0000,0x20000) was already clear
(==) I810(0): Write-combining range (0xf0000,0x10000)
(II) I810(0): Primary V_BIOS segment is: 0xc000
(II) I810(0): VESA BIOS detected
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
Fatal server error:
Caught signal 11. Server aborting
When reporting a problem related to a server crash, please send
the full server output, not just the last messages.
This can be found in the log file "/var/log/XFree86.0.log".
Please report problems to xfree86@xfree86.org.
X connection to :0.0 broken (explicit kill or server shutdown).
--vkogqOf2sHV7VnPd--
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-ports" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20010612102551.B4247>