Date: Sat, 17 Aug 2019 11:07:22 +0200 From: =?utf-8?Q?S=C3=B8ren_Schmidt?= <soren.schmidt@gmail.com> To: Emmanuel Vadot <manu@bidouilliste.com> Cc: freebsd-arm <freebsd-arm@freebsd.org>, Marcin Wojtas <mw@semihalf.com> Subject: Re: Espressobin anyone ? Message-ID: <AB07E67F-5A5E-4B5A-9D2C-6EDD4E9B478A@gmail.com> In-Reply-To: <20190816225826.ce31e8f968021944f64cb67c@bidouilliste.com> References: <E73AFF5D-43CA-41A7-BDBA-ADEF2D342479@deepcore.dk> <45CD194B-8533-42B7-9FE8-B2C8C03F4422@gmail.com> <1021311926.304550.1565731831094.JavaMail.zimbra@perftech.com> <4AE7C7A2-0BFB-4093-AE19-6AAC8F44FF25@gmail.com> <917479365.631712.1565792953255.JavaMail.zimbra@perftech.com> <CAPv3WKeCRWy65LPeeJiisPtaz=LePpVYLDAi2cj%2B2TQR=r09YA@mail.gmail.com> <1547777156.662147.1565798461515.JavaMail.zimbra@perftech.com> <0E42E605-477E-4E65-810E-BD3A8CDE2C80@gmail.com> <973015183.1067498.1565890674099.JavaMail.zimbra@perftech.com> <BD3710D7-EB87-4BD0-9CDE-E55B9412ED87@gmail.com> <20190815210311.1035f64b003e2bc85fa47ca8@bidouilliste.com> <B3AFA483-4BE4-4BC6-BCC1-4BD58A8E554C@gmail.com> <20190815233755.893e485f40ccacd79cdb3d96@bidouilliste.com> <78F5029D-A0F5-42F2-8191-07EB3A68C87B@gmail.com> <20190816152454.4e54ab5c276a543c120d909a@bidouilliste.com> <20190816171037.f808fbaba2369f179de36397@bidouilliste.com> <20190816191230.508f07f27fac21479a6716d9@bidouilliste.com> <20190816225826.ce31e8f968021944f64cb67c@bidouilliste.com>
next in thread | previous in thread | raw e-mail | index | archive | help
--Apple-Mail=_F7B444D1-9769-476F-A906-EF7240CC561B
Content-Transfer-Encoding: quoted-printable
Content-Type: text/plain;
charset=utf-8
Hi Emmunuel
Yes the 3720 gpio driver I already back ported long ago, its needed, =
I=E2=80=99m happy its now part of std stable 12!
My issue seems to be the inclusion of the phy_usb driver, if I leave =
that out, I=E2=80=99m back to normal..
I=E2=80=99ll have have another go at the latest -stable sources during =
the weekend and see how it goes.
Thanks for looking into this, with a little cooperation we=E2=80=99ll =
get this solved for the greater good..
-S=C3=B8ren
> On 16 Aug 2019, at 22.58, Emmanuel Vadot <manu@bidouilliste.com> =
wrote:
>=20
> On Fri, 16 Aug 2019 19:12:30 +0200
> Emmanuel Vadot <manu@bidouilliste.com <mailto:manu@bidouilliste.com>> =
wrote:
>=20
>> On Fri, 16 Aug 2019 17:10:37 +0200
>> Emmanuel Vadot <manu@bidouilliste.com> wrote:
>>=20
>>> On Fri, 16 Aug 2019 15:24:54 +0200
>>> Emmanuel Vadot <manu@bidouilliste.com> wrote:
>>>=20
>>>> On Fri, 16 Aug 2019 07:28:59 +0200
>>>> S=C3=B8ren Schmidt <soren.schmidt@gmail.com> wrote:
>>>>=20
>>>>> Hi
>>>>>=20
>>>>> Very simple, reverting sys/gnu/dts to what was before 350595 =
(actually 350592).
>>>>> Thats what we have svn for ?
>>>>=20
>>>> If I asked how it was to have the svn command that you used, I want =
to
>>>> make sure that you didn't revert anything else, like do you have
>>>> r350596 and r350628 ?
>>>>=20
>>>>> That does make my bananapi work again, no other changes just a =
recompiled kernel.
>>>>=20
>>>> That + copying the dtb to the fat32 partition ?
>>>>=20
>>>> Can you post the dtb somewhere.
>>>>=20
>>>>> However it does not bring the Espressobin back to life, thats =
something in one of the ~30 other files that changed between those two =
revisions.
>>>>=20
>>>> What Linux version of DTS are you using then ? The ones that were =
in
>>>> stable/12 when it was branched (4.18) or a later revision ?
>>>=20
>>> So I think that I've found the problem on the Espressobin.
>>> I think that the problem comes from the simple-mfd driver that I've
>>> mfc in r350600.
>>> The pinctrl/gpio controller compatible is
>>> "marvell,armada3710-nb-pinctrl", "syscon", "simple-mfd" and it =
attaches
>>> at BUS_PASS_INTERRUPT while the simple_mfd driver attaches at
>>> BUS_PASS_BUS (so earlier) which means that no gpio controller will =
be
>>> available for sdhci to detect the card.
>>>=20
>>> If someone with a non-working espressobin could post a full verbose
>>> boot log that would help me confirming that this is the case.
>>> I'll try to find a solution on how to solve this problem.
>>=20
>> So this wasn't the problem but I've found it, see r351129 and r351130
>>=20
>> SD card now work again in HEAD, I'll have a look at stable later next
>> week.
>=20
> I've did a quick test and I've MFC r348880, r348882 and r349596, the
> two other commits needed to be mfc'ed are the one I did today on head,
> I'll do that next week.
> With them sdcard is working again on stable/12
>=20
>>>>> -S=C3=B8ren
>>>>>=20
>>>>>> On 15 Aug 2019, at 23.37, Emmanuel Vadot <manu@bidouilliste.com> =
wrote:
>>>>>>=20
>>>>>> On Thu, 15 Aug 2019 21:56:23 +0200
>>>>>> S=C3=B8ren Schmidt <soren.schmidt@gmail.com> wrote:
>>>>>>=20
>>>>>>>=20
>>>>>>> Well, I don?t care where you are from and what color you have :)
>>>>>>>=20
>>>>>>> Now, if I update my stable12 sources to r350595 the bananapi =
breaks, if revert sys/gnu/dts it works again, go figure..
>>>>>>=20
>>>>>> Reverting to what ? and how ?
>>>>>>=20
>>>>>> Because I've just test 12-stable and I have the problem that I've =
said
>>>>>> in my previous mail so setting hw.regulator.disable_unused=3D0 is =
the
>>>>>> work around.
>>>>>> The problem is in twsi not in the DTS so I'm curious how =
reverting
>>>>>> only the dts fixes this problem.
>>>>>>=20
>>>>>>> The r351099 fix is already like that in -stable, and not part of =
the problem.
>>>>>>>=20
>>>>>>> -S=C3=B8ren
>>>>>>=20
>>>>>>>> On 15 Aug 2019, at 21.03, Emmanuel Vadot =
<manu@bidouilliste.com> wrote:
>>>>>>>>=20
>>>>>>>> On Thu, 15 Aug 2019 19:48:54 +0200
>>>>>>>> S=C3=B8ren Schmidt <soren.schmidt@gmail.com> wrote:
>>>>>>>>=20
>>>>>>>>> Hi Mit!
>>>>>>>>>=20
>>>>>>>>> Right, I suspected that, 12-stable broke many embedded systems =
between r350592 and r350595 where all the latest and greatest DTS files =
was pulled in, I guess the same holds for -current.
>>>>>>>>>=20
>>>>>>>>> -S=C3=B8ren
>>>>>>>>=20
>>>>>>>> Mhm it's fun that you think that DTS import is the source of =
all your
>>>>>>>> problems, I get it, it's easy to blame the French guy that bulk =
import
>>>>>>>> the DTS, he surely don't know what he is doing.
>>>>>>>> Anyway, two problems were raised in this thread :
>>>>>>>>=20
>>>>>>>> 1) BananaPi (A20) doesn't boot
>>>>>>>> 2) Espressobin sd support is broken
>>>>>>>>=20
>>>>>>>> I've just looked at the BananaPi problem today, I've fixed a =
first
>>>>>>>> problem in r351099.
>>>>>>>> The main problem is that when we disable the unused regulators =
we hang
>>>>>>>> when trying to disabling ldo3. It's weird because the board =
doesn't use
>>>>>>>> LDO3 (which is why we are disabling it, it's unused). The =
problem is in
>>>>>>>> twsi I think as only leaving the part in axp209 that read the
>>>>>>>> voltage register value make FreeBSD hang.
>>>>>>>> I'll have a proper look later, in the meantime you can set
>>>>>>>> hw.regulator.disable_unused=3D0
>>>>>>>> in /boot/loader.conf
>>>>>>>> This isn't a DTS problem.
>>>>>>>>=20
>>>>>>>> For Espressobin I haven't found any thing related to SD in the =
DTS
>>>>>>>> updates since the import, the only things slighly related are =
mmc and
>>>>>>>> sdio.
>>>>>>>> So if someone could find which DTS import broke this I can have =
a look.
>>>>>>>>=20
>>>>>>>>>=20
>>>>>>>>>> On 15 Aug 2019, at 19.37, Mit Matelske <mit@pt.net> wrote:
>>>>>>>>>>=20
>>>>>>>>>> Yeah, that was the problem. I went back to r348882 and =
everything worked out of the box.
>>>>>>>>>>=20
>>>>>>>>>> Thanks again for the hand holding!
>>>>>>>>>>=20
>>>>>>>>>> Mit
>>>>>>>>>>=20
>>>>>>>>>> From: "S=C3=B8ren Schmidt" <soren.schmidt@gmail.com =
<mailto:soren.schmidt@gmail.com>>
>>>>>>>>>> To: "Mit Matelske" <mit@pt.net <mailto:mit@pt.net>>
>>>>>>>>>> Cc: "Marcin Wojtas" <mw@semihalf.com =
<mailto:mw@semihalf.com>>, "freebsd-arm" <freebsd-arm@freebsd.org =
<mailto:freebsd-arm@freebsd.org>>
>>>>>>>>>> Sent: Wednesday, August 14, 2019 1:33:04 PM
>>>>>>>>>> Subject: Re: Espressobin anyone ?
>>>>>>>>>>=20
>>>>>>>>>>=20
>>>>>>>>>> It might simply be broken in -current (again).
>>>>>>>>>>=20
>>>>>>>>>> I just updated my stable12 tree and I pulled in new .dts =
files for just about anything?
>>>>>>>>>>=20
>>>>>>>>>> Needless to say, it broke the Espressobin?s SD support, it =
now fails just like yours..
>>>>>>>>>>=20
>>>>>>>>>> It also broke allwinner builds and what not, so I?m just =
going back in time again :)
>>>>>>>>>>=20
>>>>>>>>>> I wonder why there is this overwhelming need to import stuff =
that breaks things right, left and center in a -stable branch ?
>>>>>>>>>> That would have earned you the pointy hat back when?.
>>>>>>>>>>=20
>>>>>>>>>> -S=C3=B8ren
>>>>>>>>>>=20
>>>>>>>>>>=20
>>>>>>>>>> On 14 Aug 2019, at 18.01, Mit Matelske <mit@pt.net =
<mailto:mit@pt.net>> wrote:
>>>>>>>>>>=20
>>>>>>>>>> Marcin-
>>>>>>>>>>=20
>>>>>>>>>> Sorry I didn't reply yesterday. I didn't have any luck with =
that either. I tried a lot of permutations.
>>>>>>>>>>=20
>>>>>>>>>> Not saying for 100% it doesn't work, but I couldn't get it to =
work!
>>>>>>>>>>=20
>>>>>>>>>> Mit
>>>>>>>>>>=20
>>>>>>>>>> From: "Marcin Wojtas" <mw@semihalf.com =
<mailto:mw@semihalf.com>>
>>>>>>>>>> To: "Mit Matelske" <mit@pt.net <mailto:mit@pt.net>>
>>>>>>>>>> Cc: "S=C3=B8ren Schmidt" <soren.schmidt@gmail.com =
<mailto:soren.schmidt@gmail.com>>, "freebsd-arm" =
<freebsd-arm@freebsd.org <mailto:freebsd-arm@freebsd.org>>
>>>>>>>>>> Sent: Wednesday, August 14, 2019 10:41:04 AM
>>>>>>>>>> Subject: Re: Espressobin anyone ?
>>>>>>>>>>=20
>>>>>>>>>> Hi Mit,
>>>>>>>>>> Since you are using the latest 13-current, could you please =
try if passing rootdev via u-boot bootargs (please see my previous =
email) works for you without the loader modification?
>>>>>>>>>>=20
>>>>>>>>>> Best regards,
>>>>>>>>>> Marcin
>>>>>>>>>>=20
>>>>>>>>>> ?r., 14 sie 2019 o 16:29 Mit Matelske <mit@pt.net =
<mailto:mit@pt.net>> napisa?(a):
>>>>>>>>>> Soren-
>>>>>>>>>>=20
>>>>>>>>>> Thanks for the info. I'll grab a couple more SD cards at =
lunch. This one is a new Samsung 32GB. I'll also try putting the =
changes into 12 and see if that helps. I'm using the latest 13-current.
>>>>>>>>>>=20
>>>>>>>>>> Again, appreciate the hand holding!
>>>>>>>>>>=20
>>>>>>>>>> Mit
>>>>>>>>>>=20
>>>>>>>>>> From: "S=C3=B8ren Schmidt" <soren.schmidt@gmail.com =
<mailto:soren.schmidt@gmail.com>>
>>>>>>>>>> To: "Mit Matelske" <mit@pt.net <mailto:mit@pt.net>>
>>>>>>>>>> Cc: "Marcin Wojtas" <mw@semihalf.com =
<mailto:mw@semihalf.com>>, "freebsd-arm" <freebsd-arm@freebsd.org =
<mailto:freebsd-arm@freebsd.org>>
>>>>>>>>>> Sent: Wednesday, August 14, 2019 2:30:31 AM
>>>>>>>>>> Subject: Re: Espressobin anyone ?
>>>>>>>>>>=20
>>>>>>>>>> Hi Mit
>>>>>>>>>> Hmm, from your earlier posted dmesgs it looks like the SD =
card is not getting detected properly..
>>>>>>>>>>=20
>>>>>>>>>> I get this output:
>>>>>>>>>>=20
>>>>>>>>>> sdhci_xenon0: <Armada Xenon SDHCI controller> mem =
0xd0000-0xd02ff,0x1e808-0x1e80b irq 24 on simplebus1
>>>>>>>>>> mmc0: <MMC/SD bus> on sdhci_xenon0
>>>>>>>>>> ?snip?
>>>>>>>>>> mmcsd0: 16GB <SDHC SD16G 3.0 SN 01E28E67 MFG 07/2017 by 39 =
PH> at mmc0 50.0MHz/4bit/65535-block
>>>>>>>>>>=20
>>>>>>>>>> The problem you see was fixed for me by r348882, maybe it got =
broken later, I havn?t backported the later changes..
>>>>>>>>>>=20
>>>>>>>>>> Have you tried another SD card ? I have found 2 of mine that =
the espressobin doesn?t like, but works fine with bananapi and =
friends...
>>>>>>>>>>=20
>>>>>>>>>> -S=C3=B8ren
>>>>>>>>>>=20
>>>>>>>>>> On 13 Aug 2019, at 23.30, Mit Matelske <mit@pt.net =
<mailto:mit@pt.net>> wrote:
>>>>>>>>>>=20
>>>>>>>>>> Soren-
>>>>>>>>>>=20
>>>>>>>>>> Thanks for the code snippet! That will fix one of the =
problems.
>>>>>>>>>>=20
>>>>>>>>>> I still can't mount my filesystem, though. I think I'm doing =
something really simple, wrong. I believe I'm running the latest code =
and added some printfs to show the kernel setting the regulator:
>>>>>>>>>>=20
>>>>>>>>>>=20
>>>>>>>>>> usbus1 on ehci0
>>>>>>>>>> syscon_generic4: <syscon> mem 0x5f800-0x5ffff on simplebus1
>>>>>>>>>> sdhci_xenon0: regulator_get_by_ofw_property(vqmmc-supply) =3D =
19
>>>>>>>>>> sdhci_xenon0: vqmmc-supply regulator found
>>>>>>>>>> sdhci_xenon0: <Armada Xenon SDHCI controller> mem =
0xd0000-0xd02ff,0x1e808-0x1e80b irq 24 on simplebus1
>>>>>>>>>> ahci0: <AHCI SATA controller> mem 0xe0000-0xe0177 irq 26 on =
simplebus1
>>>>>>>>>>=20
>>>>>>>>>>=20
>>>>>>>>>> Could there be a problem with how I am setting up my =
filesystem? I've tried both freebsd-ufs and freebsd as the type, with =
no luck. A gpart listing of my SD card:
>>>>>>>>>>=20
>>>>>>>>>> root@fbl:~ # gpart list da3
>>>>>>>>>> Geom name: da3
>>>>>>>>>> modified: false
>>>>>>>>>> state: OK
>>>>>>>>>> fwheads: 255
>>>>>>>>>> fwsectors: 63
>>>>>>>>>> last: 62521335
>>>>>>>>>> first: 3
>>>>>>>>>> entries: 4
>>>>>>>>>> scheme: GPT
>>>>>>>>>> Providers:
>>>>>>>>>> 1. Name: da3p1
>>>>>>>>>> Mediasize: 41943040 (40M)
>>>>>>>>>> Sectorsize: 512
>>>>>>>>>> Stripesize: 0
>>>>>>>>>> Stripeoffset: 1536
>>>>>>>>>> Mode: r0w0e0
>>>>>>>>>> efimedia: =
HD(1,GPT,19894dc5-b8b2-11e9-871f-08008a0010e0,0x3,0x14000)
>>>>>>>>>> rawuuid: 19894dc5-b8b2-11e9-871f-08008a0010e0
>>>>>>>>>> rawtype: c12a7328-f81f-11d2-ba4b-00a0c93ec93b
>>>>>>>>>> label: (null)
>>>>>>>>>> length: 41943040
>>>>>>>>>> offset: 1536
>>>>>>>>>> type: efi
>>>>>>>>>> index: 1
>>>>>>>>>> end: 81922
>>>>>>>>>> start: 3
>>>>>>>>>> 2. Name: da3p2
>>>>>>>>>> Mediasize: 31968979456 (30G)
>>>>>>>>>> Sectorsize: 512
>>>>>>>>>> Stripesize: 0
>>>>>>>>>> Stripeoffset: 41944576
>>>>>>>>>> Mode: r0w0e0
>>>>>>>>>> efimedia: =
HD(2,GPT,98786462-be30-11e9-ae6e-08008a0010e0,0x14003,0x3b8bff5)
>>>>>>>>>> rawuuid: 98786462-be30-11e9-ae6e-08008a0010e0
>>>>>>>>>> rawtype: 516e7cb6-6ecf-11d6-8ff8-00022d09712b
>>>>>>>>>> label: (null)
>>>>>>>>>> length: 31968979456
>>>>>>>>>> offset: 41944576
>>>>>>>>>> type: freebsd-ufs
>>>>>>>>>> index: 2
>>>>>>>>>> end: 62521335
>>>>>>>>>> start: 81923
>>>>>>>>>> Consumers:
>>>>>>>>>> 1. Name: da3
>>>>>>>>>> Mediasize: 32010928128 (30G)
>>>>>>>>>> Sectorsize: 512
>>>>>>>>>> Mode: r0w0e0
>>>>>>>>>>=20
>>>>>>>>>> Thanks!!
>>>>>>>>>>=20
>>>>>>>>>> Mit
>>>>>>>>>>=20
>>>>>>>>>> From: "S=C3=B8ren Schmidt" <soren.schmidt@gmail.com =
<mailto:soren.schmidt@gmail.com>>
>>>>>>>>>> To: "Marcin Wojtas" <mw@semihalf.com =
<mailto:mw@semihalf.com>>
>>>>>>>>>> Cc: "Mit Matelske" <mit@pt.net <mailto:mit@pt.net>>, =
"freebsd-arm" <freebsd-arm@freebsd.org <mailto:freebsd-arm@freebsd.org>>
>>>>>>>>>> Sent: Tuesday, August 13, 2019 12:55:09 PM
>>>>>>>>>> Subject: Re: Espressobin anyone ?
>>>>>>>>>>=20
>>>>>>>>>> Hi
>>>>>>>>>> That doesn?t seen to work on the espressobin, or least I =
can?t get it to pick it up.
>>>>>>>>>>=20
>>>>>>>>>> I use this patch as a workaround:
>>>>>>>>>>=20
>>>>>>>>>> Index: main.c
>>>>>>>>>> =
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
>>>>>>>>>> --- main.c (revision 350496)
>>>>>>>>>> +++ main.c (working copy)
>>>>>>>>>> @@ -463,6 +462,13 @@
>>>>>>>>>> int rv;
>>>>>>>>>> char *rootdev;
>>>>>>>>>>=20
>>>>>>>>>> +#if defined(__aarch64__)
>>>>>>>>>> + /* SOS HACK in rootdev, at least Espressobin gets this =
wrong */
>>>>>>>>>> + printf("Setting currdev hack\n");
>>>>>>>>>> + set_currdev("disk0p2");
>>>>>>>>>> + return (0);
>>>>>>>>>> +#endif
>>>>>>>>>> +
>>>>>>>>>> /*
>>>>>>>>>> * First choice: if rootdev is already set, use that, even =
if
>>>>>>>>>> * it's wrong.
>>>>>>>>>>=20
>>>>>>>>>> Its not pretty but it does the job until I get time to look =
into why bootargs aren?t passed / won?t stick, probably something I =
havn?t backported to my -stable12 sources yet...
>>>>>>>>>>=20
>>>>>>>>>> -S=C3=B8ren
>>>>>>>>>>=20
>>>>>>>>>> On 13 Aug 2019, at 01.38, Marcin Wojtas <mw@semihalf.com =
<mailto:mw@semihalf.com>> wrote:
>>>>>>>>>>=20
>>>>>>>>>> Hi,
>>>>>>>>>>=20
>>>>>>>>>> Not sure if it's what you are looking for, but in order to =
autoboot, I
>>>>>>>>>> simply pass 'rootdev=3DdiskXpY' in the bootargs variable. =
Here's example from
>>>>>>>>>> A3720-DB (same should work on EspressoBin):
>>>>>>>>>>=20
>>>>>>>>>> Marvell>> set bootargs "rootdev=3Ddisk1p1";usb reset; fatload =
usb 0:1
>>>>>>>>>> ${fdt_addr} armada-3720-db.dtb; fatload usb 0:1 =
${kernel_addr}
>>>>>>>>>> boot/loader.efi; bootefi ${kernel_addr} ${fdt_addr}
>>>>>>>>>> resetting USB...
>>>>>>>>>> USB0: Register 2000104 NbrPorts 2
>>>>>>>>>> Starting the controller
>>>>>>>>>> USB XHCI 1.00
>>>>>>>>>> USB1: USB EHCI 1.00
>>>>>>>>>> - ______ ____ _____ _____
>>>>>>>>>> | ____| | _ \ / ____| __ \
>>>>>>>>>> | |___ _ __ ___ ___ | |_) | (___ | | | |
>>>>>>>>>> | ___| '__/ _ \/ _ \| _ < \___ \| | | |
>>>>>>>>>> | | | | | __/ __/| |_) |____) | |__| |
>>>>>>>>>> | | | | | | || | | |
>>>>>>>>>> |_| |_| \___|\___||____/|_____/|_____/
>>>>>>>>>> ```
>>>>>>>>>> `
>>>>>>>>>> ????????????Welcome to FreeBSD????????????? s` =
`.....---.......--.```
>>>>>>>>>> -/
>>>>>>>>>> ? ? +o .--` =
/y:`
>>>>>>>>>> +.
>>>>>>>>>> ? 1. Boot Multi user [Enter] ? yo`:. =
:o
>>>>>>>>>> `+-
>>>>>>>>>> ? 2. Boot Single user ? y/ =
-/` -o/
>>>>>>>>>> ? 3. Escape to loader prompt ? .-
>>>>>>>>>> ::/sy+:.
>>>>>>>>>> ? 4. Reboot ? / =
`--
>>>>>>>>>> /
>>>>>>>>>> ? ? `:
>>>>>>>>>> :`
>>>>>>>>>> ? Options: ? `:
>>>>>>>>>> :`
>>>>>>>>>> ? 5. Kernel: default/kernel (1 of 1) ? /
>>>>>>>>>> /
>>>>>>>>>> ? 6. Boot Options ? .-
>>>>>>>>>> -.
>>>>>>>>>> ? ? -- =
-.
>>>>>>>>>> ? ? `:` =
`:`
>>>>>>>>>> ? ? .-- =
`--.
>>>>>>>>>> ??????????????????????????????????????????? =
.---.....----.
>>>>>>>>>> Autoboot in 9 seconds, hit [Enter] to boot or any other key =
to stop
>>>>>>>>>>=20
>>>>>>>>>> Loading kernel...
>>>>>>>>>> /boot/kernel/kernel text=3D0x95047c data=3D0x1919d0+0x84aa94
>>>>>>>>>> syms=3D[0x8+0x13aaa8+0x8+0x12610d]
>>>>>>>>>> Loading configured modules...
>>>>>>>>>> can't find '/boot/entropy'
>>>>>>>>>> Using DTB provided by EFI at 0x8000000.
>>>>>>>>>> ---<<BOOT>>---
>>>>>>>>>> KDB: debugger backends: ddb
>>>>>>>>>> KDB: current backend: ddb
>>>>>>>>>> Copyright (c) 1992-2019 The FreeBSD Project.
>>>>>>>>>> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, =
1993, 1994
>>>>>>>>>> The Regents of the University of California. All rights =
reserved.
>>>>>>>>>> FreeBSD is a registered trademark of The FreeBSD Foundation.
>>>>>>>>>> FreeBSD 13.0-CURRENT 17a1fc80d57-c261519(upstream_master) =
GENERIC arm64
>>>>>>>>>> FreeBSD clang version 8.0.0 (tags/RELEASE_800/final 356365) =
(based on LLVM
>>>>>>>>>> 8.0.0)
>>>>>>>>>> WARNING: WITNESS option enabled, expect reduced performance.
>>>>>>>>>> VT: init without driver.
>>>>>>>>>> Starting CPU 1 (1)
>>>>>>>>>> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
>>>>>>>>>> [...]
>>>>>>>>>>=20
>>>>>>>>>> Best regards,
>>>>>>>>>> Marcin
>>>>>>>>>>=20
>>>>>>>>>> pon., 12 sie 2019 o 23:14 Mit Matelske <mit@pt.net =
<mailto:mit@pt.net>> napisa?(a):
>>>>>>>>>>=20
>>>>>>>>>>=20
>>>>>>>>>> Soren-
>>>>>>>>>>=20
>>>>>>>>>> Thanks for the quick response. I built this kernel with =
revision 350924.
>>>>>>>>>> I'll dig into whats going on in the morning.
>>>>>>>>>>=20
>>>>>>>>>> Mind posting your diff for your loader.efi?
>>>>>>>>>>=20
>>>>>>>>>> Thanks again!
>>>>>>>>>>=20
>>>>>>>>>> Mit
>>>>>>>>>>=20
>>>>>>>>>>=20
>>>>>>>>>> ----- Original Message -----
>>>>>>>>>> From: "S=C3=B8ren Schmidt" <soren.schmidt@gmail.com =
<mailto:soren.schmidt@gmail.com>>
>>>>>>>>>> To: "Mit Matelske" <mit@pt.net <mailto:mit@pt.net>>
>>>>>>>>>> Cc: "tscho" <johannes@t-beutel.com =
<mailto:johannes@t-beutel.com>>, "freebsd-arm" <
>>>>>>>>>> freebsd-arm@freebsd.org <mailto:freebsd-arm@freebsd.org>>
>>>>>>>>>> Sent: Monday, August 12, 2019 3:49:48 PM
>>>>>>>>>> Subject: Re: Espressobin anyone ?
>>>>>>>>>>=20
>>>>>>>>>> Hi
>>>>>>>>>>=20
>>>>>>>>>> Looks like your sources may be too old, you need to be at =
least at r348882
>>>>>>>>>> to get the fix for the SD card VCC regulator.
>>>>>>>>>>=20
>>>>>>>>>> That change fixed it for me backported to 12-stable...
>>>>>>>>>>=20
>>>>>>>>>> The currdev problem still exists, I have it hardwired in my =
loader for
>>>>>>>>>> aarch64 :)
>>>>>>>>>>=20
>>>>>>>>>> -S=C3=B8ren
>>>>>>>>>>=20
>>>>>>>>>>=20
>>>>>>>>>> On 12 Aug 2019, at 21.06, Mit Matelske <mit@pt.net =
<mailto:mit@pt.net>> wrote:
>>>>>>>>>>=20
>>>>>>>>>> I'm having a couple little hiccups booting this board also. =
One has
>>>>>>>>>> been commented on already, that I can't get the loader to =
automatically
>>>>>>>>>> start loading the kernel on "disk0p2"...
>>>>>>>>>>=20
>>>>>>>>>> The second, is that the kernel can't find the SD card after =
booting so
>>>>>>>>>> it can't mount the root filesystem. I'm using the dts/dtb =
and kernel from
>>>>>>>>>> the 13-current branch.
>>>>>>>>>>=20
>>>>>>>>>> Thanks for any and all help. I haven't used u-boot in about =
decade.
>>>>>>>>>> Spoiled by the x86 platform.
>>>>>>>>>>=20
>>>>>>>>>> Mit Matelske
>>>>>>>>>>=20
>>>>>>>>>>=20
>>>>>>>>>> ***U-boot environment:***
>>>>>>>>>>=20
>>>>>>>>>>=20
>>>>>>>>>> Marvell>> printenv
>>>>>>>>>> baudrate=3D115200
>>>>>>>>>> bootargs=3Dconsole=3DttyMV0,115200 =
earlycon=3Dar3700_uart,0xd0012000
>>>>>>>>>> root=3D/dev/mmcblk0p1 rw rootwait net.ifnames=3D0 =
biosdevname=3D0
>>>>>>>>>> bootcmd=3Dmmc dev 0; fatload mmc 0:1 $kernel_addr =
$image_name;fatload mmc
>>>>>>>>>> 0:1 $fdt_addr $fdt_name; bootefi $kernel_addr $fdt_addr
>>>>>>>>>> bootdelay=3D2
>>>>>>>>>> bootmmc=3Dmmc dev 0; fatload mmc 0:1 $kernel_addr =
$image_name;fatload mmc
>>>>>>>>>> 0:1 $fdt_addr $fdt_name; bootefi $kernel_addr $fdt_addr
>>>>>>>>>> console=3Dconsole=3DttyMV0,115200 =
earlycon=3Dar3700_uart,0xd0012000
>>>>>>>>>> eth1addr=3D00:51:82:11:22:01
>>>>>>>>>> eth2addr=3D00:51:82:11:22:02
>>>>>>>>>> eth3addr=3D00:51:82:11:22:03
>>>>>>>>>> ethact=3Dneta@30000
>>>>>>>>>> ethaddr=3DF0:AD:4E:09:6B:8F
>>>>>>>>>> ethprime=3Deth0
>>>>>>>>>> fdt_addr=3D0x4f00000
>>>>>>>>>> fdt_high=3D0xffffffffffffffff
>>>>>>>>>> fdt_name=3Defi/boot/armada-3720-espressobin.dtb
>>>>>>>>>> fdtcontroladdr=3D3f7161b8
>>>>>>>>>> gatewayip=3D10.4.50.254
>>>>>>>>>> get_images=3Dtftpboot $kernel_addr $image_name; tftpboot =
$fdt_addr
>>>>>>>>>> $fdt_name; run get_ramfs
>>>>>>>>>> get_ramfs=3Dif test "${ramfs_name}" !=3D "-"; then setenv =
ramfs_addr
>>>>>>>>>> 0x8000000; tftpboot $ramfs_addr $ramfs_name; else setenv =
ramfs_addr -;fi
>>>>>>>>>> hostname=3Dmarvell
>>>>>>>>>> image_name=3Defi/freebsd/loader.efi
>>>>>>>>>> initrd_addr=3D0xa00000
>>>>>>>>>> initrd_size=3D0x2000000
>>>>>>>>>> ipaddr=3D0.0.0.0
>>>>>>>>>> kernel_addr=3D0x5000000
>>>>>>>>>> loadaddr=3D0x5000000
>>>>>>>>>> netdev=3Deth0
>>>>>>>>>> netmask=3D255.255.255.0
>>>>>>>>>> ramfs_addr=3D0x8000000
>>>>>>>>>> ramfs_name=3D-
>>>>>>>>>> root=3Droot=3D/dev/nfs rw
>>>>>>>>>> rootpath=3D/srv/nfs/
>>>>>>>>>> serverip=3D0.0.0.0
>>>>>>>>>> set_bootargs=3Dsetenv bootargs $console $root
>>>>>>>>>> =
ip=3D$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:none
>>>>>>>>>> nfsroot=3D$serverip:$rootpath $extra_params
>>>>>>>>>> stderr=3Dserial@12000
>>>>>>>>>> stdin=3Dserial@12000
>>>>>>>>>> stdout=3Dserial@12000
>>>>>>>>>>=20
>>>>>>>>>>=20
>>>>>>>>>> ***Full boot logs:***
>>>>>>>>>>=20
>>>>>>>>>>=20
>>>>>>>>>> U-Boot 2017.03-armada-17.10.2-g14aeedc (Jun 01 2018 - =
15:39:10 +0800)
>>>>>>>>>>=20
>>>>>>>>>> Model: Marvell Armada 3720 Community Board ESPRESSOBin
>>>>>>>>>> CPU @ 1000 [MHz]
>>>>>>>>>> L2 @ 800 [MHz]
>>>>>>>>>> TClock @ 200 [MHz]
>>>>>>>>>> DDR @ 800 [MHz]
>>>>>>>>>> DRAM: 1 GiB
>>>>>>>>>> U-Boot DT blob at : 000000003f7161b8
>>>>>>>>>> Comphy-0: USB3 5 Gbps
>>>>>>>>>> Comphy-1: PEX0 2.5 Gbps
>>>>>>>>>> Comphy-2: SATA0 6 Gbps
>>>>>>>>>> SATA link 0 timeout.
>>>>>>>>>> AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
>>>>>>>>>> flags: ncq led only pmp fbss pio slum part sxs
>>>>>>>>>> PCIE-0: Link down
>>>>>>>>>> MMC: sdhci@d0000: 0, sdhci@d8000: 1
>>>>>>>>>> SF: Detected mx25u3235f with page size 256 Bytes, erase size =
64 KiB,
>>>>>>>>>> total 4 MiB
>>>>>>>>>> Net: eth0: neta@30000 [PRIME]
>>>>>>>>>> Hit any key to stop autoboot: 0
>>>>>>>>>> switch to partitions #0, OK
>>>>>>>>>> mmc0 is current device
>>>>>>>>>> reading efi/freebsd/loader.efi
>>>>>>>>>> 603872 bytes read in 49 ms (11.8 MiB/s)
>>>>>>>>>> reading efi/boot/armada-3720-espressobin.dtb
>>>>>>>>>> 15946 bytes read in 17 ms (916 KiB/s)
>>>>>>>>>> ## Starting EFI application at 05000000 ...
>>>>>>>>>> Scanning disk sdhci@d0000.blk <mailto:sdhci@d0000.blk>...
>>>>>>>>>> Card did not respond to voltage select!
>>>>>>>>>> mmc_init: -95, time 50
>>>>>>>>>> Found 1 disks
>>>>>>>>>> Consoles: EFI console
>>>>>>>>>> FreeBSD/arm64 EFI loader, Revision 1.1
>>>>>>>>>>=20
>>>>>>>>>> Command line arguments: loader.efi
>>>>>>>>>> EFI version: 2.05
>>>>>>>>>> EFI Firmware: Das U-boot (rev 0.00)
>>>>>>>>>> Console: efi (0)
>>>>>>>>>> Failed to find bootable partition
>>>>>>>>>> Startup error in /boot/lua/loader.lua: seconds
>>>>>>>>>> LUA ERROR: cannot open /boot/lua/loader.lua: invalid =
argument.
>>>>>>>>>>=20
>>>>>>>>>> can't load 'kernel'
>>>>>>>>>>=20
>>>>>>>>>> Type '?' for a list of commands, 'help' for more detailed =
help.
>>>>>>>>>> OK
>>>>>>>>>> OK set currdev=3Ddisk0p2
>>>>>>>>>> OK boot
>>>>>>>>>>=20
>>>>>>>>>> /boot/kernel/kernel text=3D0x97d6a0 data=3D0x191b50+0x84ae94
>>>>>>>>>> syms=3D[0x8+0x137dd8+0x8+0x126260]
>>>>>>>>>> Using DTB provided by EFI at 0x8000000.
>>>>>>>>>> ---<<BOOT>>---
>>>>>>>>>> KDB: debugger backends: ddb
>>>>>>>>>> KDB: current backend: ddb
>>>>>>>>>> Copyright (c) 1992-2019 The FreeBSD Project.
>>>>>>>>>> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, =
1993, 1994
>>>>>>>>>> The Regents of the University of California. All rights =
reserved.
>>>>>>>>>> FreeBSD is a registered trademark of The FreeBSD Foundation.
>>>>>>>>>> FreeBSD 13.0-CURRENT GENERIC arm64
>>>>>>>>>> FreeBSD clang version 6.0.1 (tags/RELEASE_601/final 335540) =
(based on
>>>>>>>>>> LLVM 6.0.1)
>>>>>>>>>> WARNING: WITNESS option enabled, expect reduced performance.
>>>>>>>>>> VT: init without driver.
>>>>>>>>>> Starting CPU 1 (1)
>>>>>>>>>> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
>>>>>>>>>> arc4random: WARNING: initial seeding bypassed the =
cryptographic random
>>>>>>>>>> device because it was not yet seeded and the knob =
'bypass_before_seeding'
>>>>>>>>>> was enabled.
>>>>>>>>>> random: entropy device external interface
>>>>>>>>>> MAP 3e681000 mode 2 pages 1
>>>>>>>>>> MAP 3ffa6000 mode 2 pages 1
>>>>>>>>>> kbd0 at kbdmux0
>>>>>>>>>> ofwbus0: <Open Firmware Device Tree>
>>>>>>>>>> simplebus0: <Flattened device tree simple bus> on ofwbus0
>>>>>>>>>> simplebus1: <Flattened device tree simple bus> on simplebus0
>>>>>>>>>> simple_mfd0: <Simple MFD (Multi-Functions Device)> mem
>>>>>>>>>> 0x13800-0x138ff,0x13c00-0x13c1f on simplebus1
>>>>>>>>>> simple_mfd1: <Simple MFD (Multi-Functions Device)> mem
>>>>>>>>>> 0x18800-0x188ff,0x18c00-0x18c1f on simplebus1
>>>>>>>>>> psci0: <ARM Power State Co-ordination Interface Driver> on =
ofwbus0
>>>>>>>>>> gic0: <ARM Generic Interrupt Controller v3.0> mem
>>>>>>>>>> =
0x1d00000-0x1d0ffff,0x1d40000-0x1d7ffff,0x1d80000-0x1d81fff,0x1d90000-0x1d=
91fff,0x1da0000-0x1dbffff
>>>>>>>>>> irq 27 on simplebus1
>>>>>>>>>> gpio0: <Armada 37x0 North Bridge GPIO Controller> mem
>>>>>>>>>> 0x13800-0x138ff,0x13c00-0x13c1f irq =
28,29,30,31,32,33,34,35,36,37,38,39 on
>>>>>>>>>> simple_mfd0
>>>>>>>>>> gpio0: cannot allocate memory window
>>>>>>>>>> device_attach: gpio0 attach returned 6
>>>>>>>>>> gpio0: <Armada 37x0 South Bridge GPIO Controller> mem
>>>>>>>>>> 0x18800-0x188ff,0x18c00-0x18c1f irq 40,41,42,43,44 on =
simple_mfd1
>>>>>>>>>> gpio0: cannot allocate memory window
>>>>>>>>>> device_attach: gpio0 attach returned 6
>>>>>>>>>> gpioregulator0: <GPIO controlled regulator> on ofwbus0
>>>>>>>>>> gpioregulator0: cannot get pin 0
>>>>>>>>>> gpioregulator0: cannot parse parameters
>>>>>>>>>> device_attach: gpioregulator0 attach returned 6
>>>>>>>>>> generic_timer0: <ARMv8 Generic Timer> irq 0,1,2,3 on ofwbus0
>>>>>>>>>> Timecounter "ARM MPCore Timecounter" frequency 12500000 Hz =
quality 1000
>>>>>>>>>> Event timer "ARM MPCore Eventtimer" frequency 12500000 Hz =
quality 1000
>>>>>>>>>> gpio0: <Armada 37x0 North Bridge GPIO Controller> mem
>>>>>>>>>> 0x13800-0x138ff,0x13c00-0x13c1f irq =
28,29,30,31,32,33,34,35,36,37,38,39 on
>>>>>>>>>> simple_mfd0
>>>>>>>>>> gpio0: cannot allocate memory window
>>>>>>>>>> device_attach: gpio0 attach returned 6
>>>>>>>>>> gpio0: <Armada 37x0 South Bridge GPIO Controller> mem
>>>>>>>>>> 0x18800-0x188ff,0x18c00-0x18c1f irq 40,41,42,43,44 on =
simple_mfd1
>>>>>>>>>> gpio0: cannot allocate memory window
>>>>>>>>>> device_attach: gpio0 attach returned 6
>>>>>>>>>> gpioregulator0: <GPIO controlled regulator> on ofwbus0
>>>>>>>>>> gpioregulator0: cannot get pin 0
>>>>>>>>>> gpioregulator0: cannot parse parameters
>>>>>>>>>> device_attach: gpioregulator0 attach returned 6
>>>>>>>>>> gpio0: <Armada 37x0 North Bridge GPIO Controller> mem
>>>>>>>>>> 0x13800-0x138ff,0x13c00-0x13c1f irq =
28,29,30,31,32,33,34,35,36,37,38,39 on
>>>>>>>>>> simple_mfd0
>>>>>>>>>> gpio0: cannot allocate memory window
>>>>>>>>>> device_attach: gpio0 attach returned 6
>>>>>>>>>> gpio0: <Armada 37x0 South Bridge GPIO Controller> mem
>>>>>>>>>> 0x18800-0x188ff,0x18c00-0x18c1f irq 40,41,42,43,44 on =
simple_mfd1
>>>>>>>>>> gpio0: cannot allocate memory window
>>>>>>>>>> device_attach: gpio0 attach returned 6
>>>>>>>>>> gpioregulator0: <GPIO controlled regulator> on ofwbus0
>>>>>>>>>> gpioregulator0: cannot get pin 0
>>>>>>>>>> gpioregulator0: cannot parse parameters
>>>>>>>>>> device_attach: gpioregulator0 attach returned 6
>>>>>>>>>> gpio0: <Armada 37x0 North Bridge GPIO Controller> mem
>>>>>>>>>> 0x13800-0x138ff,0x13c00-0x13c1f irq =
28,29,30,31,32,33,34,35,36,37,38,39 on
>>>>>>>>>> simple_mfd0
>>>>>>>>>> gpio0: cannot allocate memory window
>>>>>>>>>> device_attach: gpio0 attach returned 6
>>>>>>>>>> gpio0: <Armada 37x0 South Bridge GPIO Controller> mem
>>>>>>>>>> 0x18800-0x188ff,0x18c00-0x18c1f irq 40,41,42,43,44 on =
simple_mfd1
>>>>>>>>>> gpio0: cannot allocate memory window
>>>>>>>>>> device_attach: gpio0 attach returned 6
>>>>>>>>>> gpioregulator0: <GPIO controlled regulator> on ofwbus0
>>>>>>>>>> gpioregulator0: cannot get pin 0
>>>>>>>>>> gpioregulator0: cannot parse parameters
>>>>>>>>>> device_attach: gpioregulator0 attach returned 6
>>>>>>>>>> gpio0: <Armada 37x0 North Bridge GPIO Controller> mem
>>>>>>>>>> 0x13800-0x138ff,0x13c00-0x13c1f irq =
28,29,30,31,32,33,34,35,36,37,38,39 on
>>>>>>>>>> simple_mfd0
>>>>>>>>>> gpio0: cannot allocate memory window
>>>>>>>>>> device_attach: gpio0 attach returned 6
>>>>>>>>>> gpio0: <Armada 37x0 South Bridge GPIO Controller> mem
>>>>>>>>>> 0x18800-0x188ff,0x18c00-0x18c1f irq 40,41,42,43,44 on =
simple_mfd1
>>>>>>>>>> gpio0: cannot allocate memory window
>>>>>>>>>> device_attach: gpio0 attach returned 6
>>>>>>>>>> gpioregulator0: <GPIO controlled regulator> on ofwbus0
>>>>>>>>>> gpioregulator0: cannot get pin 0
>>>>>>>>>> gpioregulator0: cannot parse parameters
>>>>>>>>>> device_attach: gpioregulator0 attach returned 6
>>>>>>>>>> cpulist0: <Open Firmware CPU Group> on ofwbus0
>>>>>>>>>> cpu0: <Open Firmware CPU> on cpulist0
>>>>>>>>>> cpu1: <Open Firmware CPU> on cpulist0
>>>>>>>>>> pmu0: <Performance Monitoring Unit> irq 4 on ofwbus0
>>>>>>>>>> syscon_generic0: <syscon> mem 0xd000-0xdfff on simplebus1
>>>>>>>>>> syscon_generic1: <syscon> mem 0x11500-0x1153f on simplebus1
>>>>>>>>>> uart0: <Marvell Armada 3700 UART> mem 0x12000-0x121ff irq =
9,10,11 on
>>>>>>>>>> simplebus1
>>>>>>>>>> uart0: console (115200,n,8,1)
>>>>>>>>>> gpio0: <Armada 37x0 North Bridge GPIO Controller> mem
>>>>>>>>>> 0x13800-0x138ff,0x13c00-0x13c1f irq =
28,29,30,31,32,33,34,35,36,37,38,39 on
>>>>>>>>>> simple_mfd0
>>>>>>>>>> gpio0: cannot allocate memory window
>>>>>>>>>> device_attach: gpio0 attach returned 6
>>>>>>>>>> syscon_generic2: <syscon> mem 0x14000-0x1405f on simplebus1
>>>>>>>>>> gpio0: <Armada 37x0 South Bridge GPIO Controller> mem
>>>>>>>>>> 0x18800-0x188ff,0x18c00-0x18c1f irq 40,41,42,43,44 on =
simple_mfd1
>>>>>>>>>> gpio0: cannot allocate memory window
>>>>>>>>>> device_attach: gpio0 attach returned 6
>>>>>>>>>> mvneta0: <NETA controller> mem 0x30000-0x33fff irq 14 on =
simplebus1
>>>>>>>>>> mvneta0: version is 10
>>>>>>>>>> mvneta0: Ethernet address: 00:a6:39:ca:e8:00
>>>>>>>>>> mdio0: <MDIO> on mvneta0
>>>>>>>>>> mdioproxy0: <MII/MDIO proxy, MDIO side> on mdio0
>>>>>>>>>> e6000sw0: <Marvell 88E6341> on mdio0
>>>>>>>>>> e6000sw0: multi-chip addressing mode (0x1)
>>>>>>>>>> e6000sw0: CPU port at 0
>>>>>>>>>> e6000sw0: fixed port at 0
>>>>>>>>>> e6000sw0: PHY at port 1
>>>>>>>>>> miibus0: <MII bus> on e6000sw0
>>>>>>>>>> e1000phy0: <Marvell 88E1000 Gigabit PHY> PHY 17 on miibus0
>>>>>>>>>> e1000phy0: none, 10baseT, 10baseT-FDX, 100baseTX, =
100baseTX-FDX,
>>>>>>>>>> 1000baseT, 1000baseT-master, 1000baseT-FDX, =
1000baseT-FDX-master, auto
>>>>>>>>>> e6000sw0: PHY at port 2
>>>>>>>>>> miibus1: <MII bus> on e6000sw0
>>>>>>>>>> e1000phy1: <Marvell 88E1000 Gigabit PHY> PHY 18 on miibus1
>>>>>>>>>> e1000phy1: none, 10baseT, 10baseT-FDX, 100baseTX, =
100baseTX-FDX,
>>>>>>>>>> 1000baseT, 1000baseT-master, 1000baseT-FDX, =
1000baseT-FDX-master, auto
>>>>>>>>>> e6000sw0: PHY at port 3
>>>>>>>>>> miibus2: <MII bus> on e6000sw0
>>>>>>>>>> e1000phy2: <Marvell 88E1000 Gigabit PHY> PHY 19 on miibus2
>>>>>>>>>> e1000phy2: none, 10baseT, 10baseT-FDX, 100baseTX, =
100baseTX-FDX,
>>>>>>>>>> 1000baseT, 1000baseT-master, 1000baseT-FDX, =
1000baseT-FDX-master, auto
>>>>>>>>>> e6000sw0: switch is ready.
>>>>>>>>>> etherswitch0: <Switch controller> on e6000sw0
>>>>>>>>>> xhci0: <Generic USB 3.0 controller> mem 0x58000-0x5bfff irq =
16 on
>>>>>>>>>> simplebus1
>>>>>>>>>> xhci0: 32 bytes context size, 32-bit DMA
>>>>>>>>>> usbus0 on xhci0
>>>>>>>>>> syscon_generic3: <syscon> mem 0x5d800-0x5dfff on simplebus1
>>>>>>>>>> ehci0: <Marvell Integrated USB 2.0 controller> mem =
0x5e000-0x5efff irq
>>>>>>>>>> 17 on simplebus1
>>>>>>>>>> usbus1: EHCI version 1.0
>>>>>>>>>> usbus1 on ehci0
>>>>>>>>>> syscon_generic4: <syscon> mem 0x5f800-0x5ffff on simplebus1
>>>>>>>>>> sdhci_xenon0: <Armada Xenon SDHCI controller> mem
>>>>>>>>>> 0xd0000-0xd02ff,0x1e808-0x1e80b irq 24 on simplebus1
>>>>>>>>>> ahci0: <AHCI SATA controller> mem 0xe0000-0xe0177 irq 26 on =
simplebus1
>>>>>>>>>> ahci0: AHCI v1.30 with 1 6Gbps ports, Port Multiplier =
supported with FBS
>>>>>>>>>> ahcich0: <AHCI channel> at channel 0 on ahci0
>>>>>>>>>> device_attach: ahcich0 attach returned 6
>>>>>>>>>> gpioregulator0: <GPIO controlled regulator> on ofwbus0
>>>>>>>>>> gpioregulator0: cannot get pin 0
>>>>>>>>>> gpioregulator0: cannot parse parameters
>>>>>>>>>> device_attach: gpioregulator0 attach returned 6
>>>>>>>>>> cryptosoft0: <software crypto>
>>>>>>>>>> Timecounters tick every 1.000 msec
>>>>>>>>>> mvneta0: link state changed to UP
>>>>>>>>>> e6000sw0port1: link state changed to DOWN
>>>>>>>>>> e6000sw0port2: link state changed to DOWN
>>>>>>>>>> e6000sw0port3: link state changed to DOWN
>>>>>>>>>> usbus0: 5.0Gbps Super Speed USB v3.0
>>>>>>>>>> usbus1: 480Mbps High Speed USB v2.0
>>>>>>>>>> Release APs...done
>>>>>>>>>> CPU 0: ARM Cortex-A53 r0p4 affinity: 0
>>>>>>>>>> Instruction Set Attributes 0 =3D <CRC32,SHA2,SHA1,AES+PMULL>
>>>>>>>>>> Trying to mount root from ufs:/dev/ufs/FreeBSD_Install =
[ro,noatime]...
>>>>>>>>>> Instruction Set Attributes 1 =3D <>
>>>>>>>>>> Root mount waiting for: Processor Features 0 =3D
>>>>>>>>>> <GIC,AdvSIMD,Float,EL3 32,EL2 32,EL1 32,EL0 32>
>>>>>>>>>> usbus1 Processor Features 1 =3D <0>
>>>>>>>>>> usbus0 Memory Model Features 0 =3D <4k Granule,64k =
Granule,S/NS
>>>>>>>>>> Mem,MixedEndian,16bit ASID,1TB PA>
>>>>>>>>>>=20
>>>>>>>>>> Memory Model Features 1 =3D <>
>>>>>>>>>> Memory Model Features 2 =3D <32b CCIDX,48b VA>
>>>>>>>>>> Debug Features 0 =3D <2 CTX Breakpoints,4 =
Watchpoints,6
>>>>>>>>>> Breakpoints,PMUv3,Debug v8>
>>>>>>>>>> Debug Features 1 =3D <0>
>>>>>>>>>> Auxiliary Features 0 =3D <0>
>>>>>>>>>> Auxiliary Features 1 =3D <0>
>>>>>>>>>> CPU 1: ARM Cortex-A53 r0p4 affinity: 1
>>>>>>>>>> WARNING: WITNESS option enabled, expect reduced performance.
>>>>>>>>>> ugen0.1: <Generic XHCI root HUB> at usbus0
>>>>>>>>>> ugen1.1: <Marvell EHCI root HUB> at usbus1
>>>>>>>>>> uhub0 on usbus0
>>>>>>>>>> uhub1 on usbus1
>>>>>>>>>> uhub0: <Generic XHCI root HUB, class 9/0, rev 3.00/1.00, addr =
1> on
>>>>>>>>>> usbus0
>>>>>>>>>> uhub1: <Marvell EHCI root HUB, class 9/0, rev 2.00/1.00, addr =
1> on
>>>>>>>>>> usbus1
>>>>>>>>>> uhub0: 2 ports with 2 removable, self powered
>>>>>>>>>> uhub1: 1 port with 1 removable, self powered
>>>>>>>>>> mountroot: waiting for device /dev/ufs/FreeBSD_Install...
>>>>>>>>>> Mounting from ufs:/dev/ufs/FreeBSD_Install failed with error =
19.
>>>>>>>>>>=20
>>>>>>>>>> Loader variables:
>>>>>>>>>> vfs.root.mountfrom=3Dufs:/dev/ufs/FreeBSD_Install
>>>>>>>>>> vfs.root.mountfrom.options=3Dro,noatime
>>>>>>>>>>=20
>>>>>>>>>> Manual root filesystem specification:
>>>>>>>>>> <fstype>:<device> [options]
>>>>>>>>>> Mount <device> using filesystem <fstype>
>>>>>>>>>> and with the specified (optional) option list.
>>>>>>>>>>=20
>>>>>>>>>> eg. ufs:/dev/da0s1a
>>>>>>>>>> zfs:zroot/ROOT/default
>>>>>>>>>> cd9660:/dev/cd0 ro
>>>>>>>>>> (which is equivalent to: mount -t cd9660 -o ro /dev/cd0 =
/)
>>>>>>>>>>=20
>>>>>>>>>> ? List valid disk boot devices
>>>>>>>>>> . Yield 1 second (for background tasks)
>>>>>>>>>> <empty line> Abort manual input
>>>>>>>>>>=20
>>>>>>>>>> mountroot> ?
>>>>>>>>>>=20
>>>>>>>>>> List of GEOM managed disk devices:
>>>>>>>>>>=20
>>>>>>>>>>=20
>>>>>>>>>> mountroot>
>>>>>>>>>> _______________________________________________
>>>>>>>>>> freebsd-arm@freebsd.org <mailto:freebsd-arm@freebsd.org> =
mailing list
>>>>>>>>>> https://lists.freebsd.org/mailman/listinfo/freebsd-arm =
<https://lists.freebsd.org/mailman/listinfo/freebsd-arm>;
>>>>>>>>>> To unsubscribe, send any mail to =
"freebsd-arm-unsubscribe@freebsd.org =
<mailto:freebsd-arm-unsubscribe@freebsd.org>"
>>>>>>>>>>=20
>>>>>>>>>> _______________________________________________
>>>>>>>>>> freebsd-arm@freebsd.org <mailto:freebsd-arm@freebsd.org> =
mailing list
>>>>>>>>>> https://lists.freebsd.org/mailman/listinfo/freebsd-arm =
<https://lists.freebsd.org/mailman/listinfo/freebsd-arm>;
>>>>>>>>>> To unsubscribe, send any mail to =
"freebsd-arm-unsubscribe@freebsd.org =
<mailto:freebsd-arm-unsubscribe@freebsd.org>"
>>>>>>>>>=20
>>>>>>>>=20
>>>>>>>>=20
>>>>>>>> --
>>>>>>>> Emmanuel Vadot <manu@bidouilliste.com> <manu@freebsd.org>
>>>>>>>=20
>>>>>>=20
>>>>>>=20
>>>>>> --
>>>>>> Emmanuel Vadot <manu@bidouilliste.com> <manu@freebsd.org>
>>>>=20
>>>>=20
>>>> --
>>>> Emmanuel Vadot <manu@bidouilliste.com> <manu@freebsd.org>
>>>> _______________________________________________
>>>> freebsd-arm@freebsd.org mailing list
>>>> https://lists.freebsd.org/mailman/listinfo/freebsd-arm
>>>> To unsubscribe, send any mail to =
"freebsd-arm-unsubscribe@freebsd.org"
>>>=20
>>>=20
>>> --
>>> Emmanuel Vadot <manu@bidouilliste.com> <manu@freebsd.org>
>>> _______________________________________________
>>> freebsd-arm@freebsd.org mailing list
>>> https://lists.freebsd.org/mailman/listinfo/freebsd-arm
>>> To unsubscribe, send any mail to =
"freebsd-arm-unsubscribe@freebsd.org"
>>=20
>>=20
>> --
>> Emmanuel Vadot <manu@bidouilliste.com> <manu@freebsd.org>
>> _______________________________________________
>> freebsd-arm@freebsd.org mailing list
>> https://lists.freebsd.org/mailman/listinfo/freebsd-arm
>> To unsubscribe, send any mail to =
"freebsd-arm-unsubscribe@freebsd.org"
>=20
>=20
> --
> Emmanuel Vadot <manu@bidouilliste.com <mailto:manu@bidouilliste.com>> =
<manu@freebsd.org <mailto:manu@freebsd.org>>
--Apple-Mail=_F7B444D1-9769-476F-A906-EF7240CC561B
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment;
filename=signature.asc
Content-Type: application/pgp-signature;
name=signature.asc
Content-Description: Message signed with OpenPGP
-----BEGIN PGP SIGNATURE-----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=n3hQ
-----END PGP SIGNATURE-----
--Apple-Mail=_F7B444D1-9769-476F-A906-EF7240CC561B--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?AB07E67F-5A5E-4B5A-9D2C-6EDD4E9B478A>