Date: Mon, 28 Mar 2005 10:58:30 -0800 From: "Thomas Foster" <tbonius@comcast.net> To: "Alexander Chamandy" <bsdfreak@gmail.com>, <freebsd-questions@freebsd.org> Subject: Re: Xorg mouse problems Message-ID: <001e01c533c8$2293e240$4300a8c0@home.lan> References: <f420b2a10503271739669a0645@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
I had similar issues with Xorg and moused on an Apex Outlook KVM. I sumply disabled moused.. and just use the device section6 of my Xorg.conf to enable the mouse. You could also try compiling the kernel with device hints and add hint.psm.0.flags="0x100" to your hint file T ----- Original Message ----- From: "Alexander Chamandy" <bsdfreak@gmail.com> To: <freebsd-questions@freebsd.org> Sent: Sunday, March 27, 2005 5:39 PM Subject: Xorg mouse problems > Hi all, > > I've got a PS/2 Labtech optical mouse with and Xorg 6.8.2 running on > FreeBSD 5.4PR with an AMD Athlon and a GeForce 2 MX and I'm having > some strange problems with Xorg and moused. This all worked fine > under NetBSD (1.6.x and 2.0) with the wsmouse driver, but strangely, > now when I use Xorg and/or moused on FreeBSD the mouse skips on > verticle or horizontal movement all the way across the screen. I've > tried changing the resolution, disabling ACPI, using different > protocols and nothing has resolved the problem. Has anyone > experienced this before and if so, how have they resolved it? > > > dmesg included: > > Copyright (c) 1992-2005 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. > FreeBSD 5.4-PRERELEASE #0: Sun Mar 27 08:12:11 EST 2005 > root@ambrosia.envescent.net:/usr/src/sys/i386/compile/ambrosia > Timecounter "i8254" frequency 1193182 Hz quality 0 > CPU: AMD Athlon(tm) Processor (1343.06-MHz 686-class CPU) > Origin = "AuthenticAMD" Id = 0x644 Stepping = 4 > > Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR> > AMD Features=0xc0440000<RSVD,AMIE,DSP,3DNow!> > real memory = 805224448 (767 MB) > avail memory = 782417920 (746 MB) > npx0: <math processor> on motherboard > npx0: INT 16 interface > cpu0 on motherboard > pcib0: <Host to PCI bridge> pcibus 0 on motherboard > pir0: <PCI Interrupt Routing Table: 9 Entries> on motherboard > $PIR: BIOS IRQ 15 for 0.4.INTC is not valid for link 0x3 > pci0: <PCI bus> on pcib0 > $PIR: ROUTE_INTERRUPT failed. > agp0: <VIA 82C8363 (Apollo KT133x/KM133) host to PCI bridge> mem > 0xe4000000-0xe7ffffff at device 0.0 on pci0 > pcib1: <PCI-PCI bridge> at device 1.0 on pci0 > pci1: <PCI bus> on pcib1 > pci1: <display, VGA> at device 0.0 (no driver attached) > isab0: <PCI-ISA bridge> at device 4.0 on pci0 > isa0: <ISA bus> on isab0 > atapci0: <VIA 82C686B UDMA100 controller> port > 0xd800-0xd80f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 4.1 on > pci0 > ata0: channel #0 on atapci0 > ata1: channel #1 on atapci0 > uhci0: <VIA 83C572 USB controller> port 0xd400-0xd41f irq 7 at device > 4.2 on pci0 > usb0: <VIA 83C572 USB controller> on uhci0 > usb0: USB revision 1.0 > uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub0: 2 ports with 2 removable, self powered > uhci1: <VIA 83C572 USB controller> port 0xd000-0xd01f irq 7 at device > 4.3 on pci0 > usb1: <VIA 83C572 USB controller> on uhci1 > usb1: USB revision 1.0 > uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub1: 2 ports with 2 removable, self powered > pci0: <bridge, PCI-unknown> at device 4.4 (no driver attached) > pci0: <multimedia, audio> at device 4.5 (no driver attached) > xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xa400-0xa47f mem > 0xd5800000-0xd580007f irq 7 at device 13.0 on pci0 > miibus0: <MII bus> on xl0 > xlphy0: <3c905C 10/100 internal PHY> on miibus0 > xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > xl0: Ethernet address: 00:04:76:e3:6d:42 > atapci1: <Promise PDC20265 UDMA100 controller> port > 0x8800-0x883f,0x9000-0x9003,0x9400-0x9407,0x9800-0x9803,0xa000-0xa007 > mem 0xd5000000-0xd501ffff irq 10 at device 17.0 on pci0 > ata2: channel #0 on atapci1 > ata3: channel #1 on atapci1 > orm0: <ISA Option ROMs> at iomem > 0xd0000-0xd07ff,0xcc000-0xce7ff,0xc0000-0xcb7ff on isa0 > pmtimer0 on isa0 > atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0 > atkbd0: <AT Keyboard> irq 1 on atkbdc0 > kbd0 at atkbd0 > psm0: <PS/2 Mouse> irq 12 on atkbdc0 > psm0: model IntelliMouse, device ID 3 > sc0: <System console> at flags 0x100 on isa0 > sc0: VGA <16 virtual consoles, flags=0x300> > sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 > sio0: type 16550A > sio1 at port 0x2f8-0x2ff irq 3 on isa0 > sio1: type 16550A > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 > unknown: <PNP0501> can't assign resources (port) > unknown: <PNP0501> can't assign resources (port) > unknown: <PNPb002> can't assign resources (irq) > unknown: <PNP0f13> can't assign resources (irq) > unknown: <PNP0303> can't assign resources (port) > Timecounter "TSC" frequency 1343055484 Hz quality 800 > Timecounters tick every 10.000 msec > acd0: CDROM <CRD-8320B/1.24> at ata0-master PIO4 > ad4: 76319MB <WDC WD800JB-00CRA1/17.07W17> [155061/16/63] at ata2-master > UDMA100 > Mounting root from ufs:/dev/ad4s1a > > > > -- > Best wishes, > > Alexander G. Chamandy > Webmaster > www.bsdfreak.org > Your Source For BSD News! > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to > "freebsd-questions-unsubscribe@freebsd.org" >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?001e01c533c8$2293e240$4300a8c0>