Date: Thu, 15 Mar 2001 10:37:51 -0000 From: "David Reid" <dreid@jetnet.co.uk> To: "Bruce Burden" <brucegb@realtime.net> Cc: <freebsd-stable@FreeBSD.ORG> Subject: Re: cdrom Message-ID: <011001c0ad3b$ff7928e0$011aa8c0@godzilla> References: <008901c0acdf$4f225b30$011aa8c0@godzilla> <20010314190427.C61949@tigerfish2.my.domain> <018501c0aceb$63844a00$011aa8c0@godzilla>
next in thread | previous in thread | raw e-mail | index | archive | help
Bit more information. pccardc dumpcis gives...
Configuration data for card in slot 0
Tuple #1, code = 0x1 (Common memory descriptor), length = 3
000: dc 00 ff
Common memory device information:
Device number 1, type Function specific, WPS = ON
Speed = 100nS, Memory block size = 512b, 1 units
Tuple #2, code = 0x15 (Version 1 info), length = 26
000: 04 01 20 00 4e 69 6e 6a 61 41 54 41 2d 00 56 31
010: 2e 30 00 41 50 30 30 20 00 ff
Version = 4.1, Manuf = [ ], card vers = [NinjaATA-]
Addit. info = [V1.0],[AP00 ]
Tuple #3, code = 0x1a (Configuration map), length = 5
000: 01 23 00 02 03
Reg len = 2, config register addr = 0x200, last config = 0x23
Registers: XX------
Tuple #4, code = 0x1b (Configuration entry), length = 21
000: e1 01 3d 11 55 1e fc 23 f0 61 80 01 07 86 03 01
010: 30 68 d0 10 00
Config index = 0x21(default)
Interface byte = 0x1 (I/O)
Vcc pwr:
Nominal operating supply voltage: 5 x 1V
Max current average over 1 second: 1.5 x 100mA
Wait scale Speed = 1.5 x 1 us
Card decodes 16 address lines, full 8/16 Bit I/O
I/O address # 1: block start = 0x180 block length = 0x8
I/O address # 2: block start = 0x386 block length = 0x2
IRQ modes: Level
IRQs: 3 5 6 12 14 15
Memory space length = 0x10
Tuple #5, code = 0x1b (Configuration entry), length = 15
000: 22 38 f0 61 90 01 07 96 03 01 30 68 d0 10 00
Config index = 0x22
Card decodes 16 address lines, full 8/16 Bit I/O
I/O address # 1: block start = 0x190 block length = 0x8
I/O address # 2: block start = 0x396 block length = 0x2
IRQ modes: Level
IRQs: 3 5 6 12 14 15
Memory space length = 0x10
Tuple #6, code = 0x1b (Configuration entry), length = 15
000: 23 38 f0 61 a0 01 07 a6 03 01 30 68 d0 10 00
Config index = 0x23
Card decodes 16 address lines, full 8/16 Bit I/O
I/O address # 1: block start = 0x1a0 block length = 0x8
I/O address # 2: block start = 0x3a6 block length = 0x2
IRQ modes: Level
IRQs: 3 5 6 12 14 15
Memory space length = 0x10
Tuple #7, code = 0x14 (No link), length = 0
Tuple #8, code = 0xff (Terminator), length = 0
1 slots found
I just finished resyncing and making 4-STABLE and I'm seeing the same
behaviour...
mount /cdrom still gives the same error :(
david
> AFAIK it's 16-bit. In fact after rebooting once it was identified as a
> NinjaATA card, which is 16-bit.
>
> david
> > >
> > > I'm getting a No such file or directory when I try to mount a CDROM
with
> > > 4-STABLE. I've seen some stuff about this and have tried as many of
the
> > > suggestions as I can, but no joy.
> > >
> > Is your pccard a 32 bit (CardBus) or a 16 bit (PCMCIA) card?
> > FreeBSD only currently supports 16 bit pccards. 5.0 is supposed to
> > have 32 bit support...
> >
> > Bruce
> >
> > To Unsubscribe: send mail to majordomo@FreeBSD.org
> > with "unsubscribe freebsd-stable" in the body of the message
> >
>
>
>
> To Unsubscribe: send mail to majordomo@FreeBSD.org
> with "unsubscribe freebsd-stable" in the body of the message
>
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?011001c0ad3b$ff7928e0$011aa8c0>