Date: Thu, 11 Nov 2010 17:06:56 +0100 From: Hans Petter Selasky <hselasky@c2i.net> To: freebsd-usb@freebsd.org Subject: Re: Motorola TER/GUSB3-E Ralink Wireless USB Message-ID: <201011111706.56225.hselasky@c2i.net> In-Reply-To: <20101111170000.7a265dc3.ehaupt@FreeBSD.org> References: <20101111170000.7a265dc3.ehaupt@FreeBSD.org>
next in thread | previous in thread | raw e-mail | index | archive | help
On Thursday 11 November 2010 17:00:00 Emanuel Haupt wrote: > I've got a Motorola TER/GUSB3-E Wireless USB stick that identifies itself > as: > > # /var/log/messages > > Nov 11 13:40:07 wiggles kernel: ugen1.3: <Ralink> at usbus1 > Nov 11 13:40:07 wiggles kernel: umass0: <Ralink 802.11 bg WLAN, class 0/0, > rev 2.00/0.01, addr 3> on usbus1 Nov 11 13:40:09 wiggles kernel: > (probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 Nov 11 > 13:40:09 wiggles kernel: (probe0:umass-sim0:0:0:0): CAM status: SCSI > Status Error Nov 11 13:40:09 wiggles kernel: (probe0:umass-sim0:0:0:0): > SCSI status: Check Condition Nov 11 13:40:09 wiggles kernel: > (probe0:umass-sim0:0:0:0): SCSI sense: NOT READY asc:3a,0 (Medium not > present) Nov 11 13:40:09 wiggles kernel: cd1 at umass-sim0 bus 0 scbus2 > target 0 lun 0 Nov 11 13:40:09 wiggles kernel: cd1: <Motorola USB Card > > Removable CD-ROM SCSI-0 device Nov 11 13:40:09 wiggles kernel: cd1: > 40.000MB/s transfers > Nov 11 13:40:09 wiggles kernel: cd1: Attempt to query device size failed: > NOT READY, Medium not present > > # usbconfig -u 1 -a 3 dump_curr_config_desc > ugen1.3: <802.11 bg WLAN Ralink> at usbus1, cfg=0 md=HOST spd=HIGH > (480Mbps) pwr=ON > > > Configuration index 0 > > bLength = 0x0009 > bDescriptorType = 0x0002 > wTotalLength = 0x0020 > bNumInterfaces = 0x0001 > bConfigurationValue = 0x0001 > iConfiguration = 0x0000 <no string> > bmAttributes = 0x0080 > bMaxPower = 0x00c8 > > Interface 0 > bLength = 0x0009 > bDescriptorType = 0x0004 > bInterfaceNumber = 0x0000 > bAlternateSetting = 0x0000 > bNumEndpoints = 0x0002 > bInterfaceClass = 0x0008 > bInterfaceSubClass = 0x0006 > bInterfaceProtocol = 0x0050 > iInterface = 0x0000 <no string> > > Endpoint 0 > bLength = 0x0007 > bDescriptorType = 0x0005 > bEndpointAddress = 0x0081 <IN> > bmAttributes = 0x0002 <BULK> > wMaxPacketSize = 0x0200 > bInterval = 0x0000 > bRefresh = 0x0000 > bSynchAddress = 0x0000 > > Endpoint 1 > bLength = 0x0007 > bDescriptorType = 0x0005 > bEndpointAddress = 0x0001 <OUT> > bmAttributes = 0x0002 <BULK> > wMaxPacketSize = 0x0200 > bInterval = 0x0000 > bRefresh = 0x0000 > bSynchAddress = 0x0000 > > Unfortunately it's not recognized by the ural driver. Has anyone an idea > what I could try? Add a usb device ID somewhere? > Hi, If you use the "dump_device_desc" command you get the idVendor and idProduct you need for the ID-table in sys/dev/usb/wlan/if_ural.c . --HPS
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201011111706.56225.hselasky>