Date: Thu, 5 Nov 1998 12:22:12 +0100 From: "Eric.TOMIO@st.com" <eric.tomio@st.com> To: questions@FreeBSD.ORG Subject: aha2490uw board Message-ID: <19981105122212.03861@nvg.sgp.st.com>
next in thread | raw e-mail | index | archive | help
HI
I am just trying free bsd on my box and I have difficulties to have
it using my scsi board
the pci probing find it but not driver is attached
see the dmesg message below
What should I do ?
FreeBSD 2.2.7-RELEASE #0: Wed Jul 22 08:48:29 GMT 1998
root@builder.cdrom.com:/usr/src/sys/compile/GENERIC
CPU: Pentium II (266.68-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x634 Stepping=4
Features=0x80f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,MMX>
real memory = 67108864 (65536K bytes)
avail memory = 63094784 (61616K bytes)
Probing for devices on PCI bus 0:
chip0 <generic PCI bridge (vendor=8086 device=7180 subclass=0)> rev 3 on pci0:0:0
chip1 <generic PCI bridge (vendor=8086 device=7181 subclass=4)> rev 3 on pci0:1:0
chip2 <Intel 82371AB PCI-ISA bridge> rev 1 on pci0:4:0
chip3 <Intel 82371AB IDE interface> rev 1 on pci0:4:1
chip4 <Intel 82371AB USB interface> rev 1 int d irq 11 on pci0:4:2
chip5 <Intel 82371AB Power management controller> rev 1 on pci0:4:3
lnc1 <PCNet/PCI Ethernet adapter> rev 37 int a irq 10 on pci0:6:0
lnc1: NE2100 (C-LANCE) address 00:60:b0:c3:23:33
vga0 <VGA-compatible display device> rev 0 int a irq 9 on pci0:10:0
pci0:12: vendor=0x9005, device=0x0010, class=storage (scsi) int a irq 11 [no driver assigne
d]
Probing for devices on PCI bus 1:
Probing for devices on the ISA bus:
sc0 at 0x60-0x6f irq 1 on motherboard
sc0: VGA color <16 virtual consoles, flags=0x0>
ed0 not found at 0x280
fe0 not found at 0x300
sio0 at 0x3f8-0x3ff irq 4 on isa
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1 not found at 0x2f8
lpt0 at 0x378-0x37f irq 7 on isa
lpt0: Interrupt-driven port
lpt1 not found at 0xffffffff
mse0 not found at 0x23c
psm0 not found at 0x60
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: FIFO enabled, 8 bytes threshold
fd0: 1.44MB 3.5in
wdc0 at 0x1f0-0x1f7 irq 14 on isa
wdc0: unit 0 (wd0): <QUANTUM FIREBALL SE4.3A>
wd0: 4104MB (8405775 sectors), 8895 cyls, 15 heads, 63 S/T, 512 B/S
wdc1 at 0x170-0x177 irq 15 on isa
wdc1: unit 0 (atapi): <HITACHI CDR-8335/0008>, removable, accel, dma, iordy
wcd0: 1779/4134Kb/sec, 128Kb cache, audio play, 255 volume levels, ejectable tray
wcd0: no disc inside, unlocked
bt0 not found at 0x330
uha0 not found at 0x330
aha0 not found at 0x330
aic0 not found at 0x340
nca0 not found at 0x1f88
nca1 not found at 0x350
sea0 not found
wt0 not found at 0x300
mcd0 not found at 0x300
matcdc0 not found at 0x230
scd0 not found at 0x230
ie0: unknown board_id: f000
ie0 not found at 0x300
--
___________________________________________________________________________
| Eric TOMIO | ST Microelectronics |eric.tomio@st.com |
| SICL | Technoparc du Pays de Gex | |
| ST | 165, rue Edouard Branly | 040 2874 |
| | 01637 SAINT GENIS-POUILLY CEDEX | TEL: (33) 4 5040 2874 |
| | FRANCE | Fax: (33) 4 5040 2870 |
|_____________|____________________________________|_______________________|
|Linux : you reboot to add harware ;^) |
|__________________________________________________________________________|
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?19981105122212.03861>