Date: Tue, 22 May 2001 10:58:47 -0400 From: "C J Michaels" <cjm2@27in.tv> To: "FreeBSD Questions" <freebsd-questions@FreeBSD.org> Subject: Errors and Colls with nic Message-ID: <DGEHIHDMIIGBKHEKEJJNEEILCBAA.cjm2@27in.tv>
next in thread | raw e-mail | index | archive | help
Hi,
I have a FreeBSD 4.3-STABLE box with two network interfaces ed0 and fxp0.
ed0 is connected to my cable modem and fxp0 is connected to a 10/100 hub. I
am getting excessive collisions on the fxp0 interface. I have changed the
hub, & the piece of cat 5. The other two computers on the lan are able to
communicate w/o any trouble. The problem appears to be centered around the
fxp0 card. I genuinley can't say how long this has been a problem and I
don't have a spare nic at this moment to test with.
Any assistance that can be provided would be greatly appreciated.
Thanks,
--Chris
P.S. I am not currently subscribed to the list, so please CC: me any
replies.
================================
10:45am [root@cartman] / # netstat -i
Name Mtu Network Address Ipkts Ierrs Opkts Oerrs
Coll
ed0 1500 <Link#1> 00:00:e8:d7:ef:3c 2296065 0 1065188 0
335
ed0 1500 ny-lancaster2 ny-lancaster2a- 1507933 -
0171 - -
fxp0 1500 <Link#2> 00:90:27:37:22:7f 4255977 5079 5711944 2
3402450
fxp0 1500 10/24 cartman.lan.27i 3907869 -
3932 - -
lo0 16384 <Link#3> 80475 0 80475 0
0
lo0 16384 127 localhost 349959 -
4899 - -
=================================
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.3-STABLE #0: Thu May 17 15:55:46 EDT 2001
root@cartman.lan.27in.tv.:/home/src/sys/compile/CARTMAN
Timecounter "i8254" frequency 1193182 Hz
CPU: AMD-K6(tm) 3D processor (300.68-MHz 586-class CPU)
Origin = "AuthenticAMD" Id = 0x580 Stepping = 0
Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX>
AMD Features=0x80000800<SYSCALL,3DNow!>
real memory = 134152192 (131008K bytes)
avail memory = 127717376 (124724K bytes)
Preloaded elf kernel "kernel" at 0xc0294000.
apm0: <APM BIOS> on motherboard
apm: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <VIA 82C598MVP (Apollo MVP3) PCI-PCI (AGP) bridge> at device 1.0 on
pci0
pci1: <PCI bus> on pcib1
pci1: <ATI Mach64-GB graphics accelerator> at 0.0 irq 11
isab0: <VIA 82C586 PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C586 ATA33 controller> port 0xc400-0xc40f at device 7.1 on
pci0
ata1: at 0x170 irq 15 on atapci0
pcib2: <PCI to PCI bridge (vendor=1106 device=3040)> at device 7.3 on pci0
ed0: <NE2000 PCI Ethernet (RealTek 8029)> port 0xc800-0xc81f irq 11 at
device 8.0 on pci0
ed0: address 00:00:e8:d7:ef:3c, type NE2000 (16 bit)
atapci1: <Promise ATA66 controller> port
0xdc00-0xdc3f,0xd800-0xd803,0xd400-0xd407,0xd000-0xd003,0xcc00-0xcc07 mem
0xea100000-0xea11ffff irq 10 at device 9.0 on pci0
ata2: at 0xcc00 on atapci1
ata3: at 0xd400 on atapci1
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xe000-0xe01f mem
0xea000000-0xea0fffff,0xea120000-0xea120fff irq 12 at device 10.0 on pci0
fxp0: Ethernet address 00:90:27:37:22:7f
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: parallel port not found.
sio2: <U.S. Robotics 56K FAX INT> at port 0x3e8-0x3ef irq 5 on isa0
sio2: type 16550A
IP packet filtering initialized, divert enabled, rule-based forwarding
enabled, default to accept, unlimited logging
DUMMYNET initialized (010124)
ata1-slave: ata_command: timeout waiting for intr
ata1-slave: identify failed
ad4: 19470MB <IBM-DJNA-352030> [39560/16/63] at ata2-master UDMA66
ad5: 9787MB <WDC AC310200R> [19885/16/63] at ata2-slave UDMA66
acd0: CDROM <FX820S> at ata1-master using PIO3
Mounting root from ufs:/dev/ad4s1a
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?DGEHIHDMIIGBKHEKEJJNEEILCBAA.cjm2>