Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 22 Jul 1998 22:08:26 +0200
From:      Erik Bakke <erikhb@bgnett.no>
To:        Kerry Woods <kerryw@demon.net>
Cc:        freebsd-scsi@FreeBSD.ORG
Subject:   Re: AHC SCSI errors
Message-ID:  <35B646BA.655E2B19@bgnett.no>
References:  <901099770.0027031.0@office.demon.net>

next in thread | previous in thread | raw e-mail | index | archive | help
Kerry Woods wrote:
> 
> Problems seen:
> 
> Jul 21 17:58:04 test /kernel: SEQADDR == 0x8
> Jul 21 17:58:04 test /kernel: SSTAT1 == 0xa
> Jul 21 17:58:04 test /kernel: (da2:ahc1:0:1:0): Queuing a BDR SCB
> Jul 21 17:58:04 test /kernel: (da2:ahc1:0:1:0): Bus Device Reset Message Sent
> Jul 21 17:58:04 test /kernel: (da2:ahc1:0:1:0): no longer in timeout, status = 3
> 4c
> Jul 21 17:58:04 test /kernel: ahc1: Bus Device Reset Sent. 1 SCBs aborted
> Jul 21 17:58:12 test /kernel: (da2:ahc1:0:1:0): SCB 0x7c - timed out while idle,
>  LASTPHASE == 0x1, SCSISIGI == 0x0
> Jul 21 17:58:12 test /kernel: SEQADDR == 0xb
> Jul 21 17:58:12 test /kernel: SSTAT1 == 0xa
> Jul 21 17:58:12 test /kernel: (da2:ahc1:0:1:0): Queuing a BDR SCB
> Jul 21 17:58:12 test /kernel: (da2:ahc1:0:1:0): Bus Device Reset Message Sent
> Jul 21 17:58:12 test /kernel: (da2:ahc1:0:1:0): no longer in timeout, status = 3
> 4c
> 
> Seen over various drives and over both controllers when the drives were
> split between them; option SCB_PAGING is not enabled;
> 

This also shows up on my computer, running 3.0-CURRENT cvsup as of 18.
jul. 98 and CAM.
Equipment in use:

Adaptec 2940U2W and 1 Seagate Cheetah 34502LW U2W drive.

---
Erik H. Bakke
Habatech AS
erikhb@bgnett.no

To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-scsi" in the body of the message



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?35B646BA.655E2B19>