Date: Thu, 16 Aug 2007 19:30:15 +0200 (CEST) From: "Reinhold" <freebsd@violetlan.net> To: freebsd-questions@freebsd.org Subject: apache problems Message-ID: <55628.212.99.207.3.1187285415.squirrel@www.violetlan.net>
next in thread | raw e-mail | index | archive | help
Hi I am having some problems with apache22 on my box. What happens is, when I'm viewing loads and loads of pages, apache will stop responding untill I restart it again. This normally happens when the free memory shown by top gets to about +- 100MB. Here is my dmesg output: Copyright (c) 1992-2007 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 6.2-STABLE #0: Thu Aug 2 12:32:26 CEST 2007 hamba@mbali.violetlan.net:/usr/obj/usr/src/sys/MYKERN module_register: module accf_data already exists! Module accf_data failed to register: 17 module_register: module accf_http already exists! Module accf_http failed to register: 17 ACPI APIC Table: <Nvidia AWRDACPI> Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Dual Core AMD Opteron(tm) Processor 165 (1808.34-MHz K8-class CPU) Origin = "AuthenticAMD" Id = 0x20f32 Stepping = 2 Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> Features2=0x1<SSE3> AMD Features=0xe2500800<SYSCALL,NX,MMX+,FFXSR,LM,3DNow!+,3DNow!> AMD Features2=0x3<LAHF,CMP> Cores per package: 2 real memory = 2147418112 (2047 MB) avail memory = 2065465344 (1969 MB) FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 ioapic0: Changing APIC ID to 2 ioapic0 <Version 1.1> irqs 0-23 on motherboard kbd1 at kbdmux0 module_register_init: MOD_LOAD (accf_data, 0xffffffff802d0f90, 0xffffffff807120c0) error 17 module_register_init: MOD_LOAD (accf_http, 0xffffffff802d0f90, 0xffffffff80713720) error 17 acpi0: <Nvidia AWRDACPI> on motherboard acpi0: Power Button (fixed) Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0 cpu0: <ACPI CPU> on acpi0 cpu1: <ACPI CPU> on acpi0 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pci0: <memory> at device 0.0 (no driver attached) isab0: <PCI-ISA bridge> at device 1.0 on pci0 isa0: <ISA bus> on isab0 pci0: <serial bus, SMBus> at device 1.1 (no driver attached) ohci0: <OHCI (generic) USB controller> mem 0xfe02f000-0xfe02ffff irq 21 at device 2.0 on pci0 ohci0: [GIANT-LOCKED] usb0: OHCI version 1.0, legacy support usb0: <OHCI (generic) USB controller> on ohci0 usb0: USB revision 1.0 uhub0: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 10 ports with 10 removable, self powered ehci0: <NVIDIA nForce4 USB 2.0 controller> mem 0xfeb00000-0xfeb000ff irq 22 at device 2.1 on pci0 ehci0: [GIANT-LOCKED] usb1: EHCI version 1.0 usb1: companion controller, 4 ports each: usb0 usb1: <NVIDIA nForce4 USB 2.0 controller> on ehci0 usb1: USB revision 2.0 uhub1: nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub1: 10 ports with 10 removable, self powered atapci0: <nVidia nForce CK804 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xe000-0xe00f at device 6.0 on pci0 ata0: <ATA channel 0> on atapci0 ata1: <ATA channel 1> on atapci0 atapci1: <nVidia nForce CK804 SATA300 controller> port 0x9f0-0x9f7,0xbf0-0xbf3,0x970-0x977,0xb70-0xb73,0xcc00-0xcc0f mem 0xfe02b000-0xfe02bfff irq 23 at device 7.0 on pci0 ata2: <ATA channel 0> on atapci1 ata3: <ATA channel 1> on atapci1 atapci2: <nVidia nForce CK804 SATA300 controller> port 0x9e0-0x9e7,0xbe0-0xbe3,0x960-0x967,0xb60-0xb63,0xb800-0xb80f mem 0xfe02a000-0xfe02afff irq 21 at device 8.0 on pci0 ata4: <ATA channel 0> on atapci2 ata5: <ATA channel 1> on atapci2 pcib1: <ACPI PCI-PCI bridge> at device 9.0 on pci0 pci1: <ACPI PCI bus> on pcib1 rl0: <RealTek 8139 10/100BaseTX> port 0xac00-0xacff mem 0xfdfff000-0xfdfff0ff irq 17 at device 7.0 on pci1 miibus0: <MII bus> on rl0 rlphy0: <RealTek internal media interface> on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto rl0: Ethernet address: 00:0e:2e:08:44:e4 pcib2: <ACPI PCI-PCI bridge> at device 11.0 on pci0 pci2: <ACPI PCI bus> on pcib2 pcib3: <ACPI PCI-PCI bridge> at device 12.0 on pci0 pci3: <ACPI PCI bus> on pcib3 pcib4: <ACPI PCI-PCI bridge> at device 13.0 on pci0 pci4: <ACPI PCI bus> on pcib4 pcib5: <ACPI PCI-PCI bridge> at device 14.0 on pci0 pci5: <ACPI PCI bus> on pcib5 pci5: <display, VGA> at device 0.0 (no driver attached) acpi_tz0: <Thermal Zone> on acpi0 fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 fdc0: [FAST] fd0: <1440-KB 3.5" drive> on fdc0 drive 0 sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A ppc0: <Standard parallel printer port> port 0x378-0x37f,0x778-0x77b irq 7 on acpi0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 orm0: <ISA Option ROM> at iomem 0xc0000-0xcefff on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounters tick every 1.000 msec ad0: 29312MB <Maxtor 33073H3 YAH814Y0> at ata0-master UDMA100 acd0: CDRW <CR-48XATE/1.0G> at ata1-master UDMA33 acd1: DVDROM <Pioneer DVD-ROM ATAPIModel DVD-106S 0122/E1.22> at ata1-slave UDMA66 ad4: 238475MB <Seagate ST3250820AS 3.AAE> at ata2-master SATA150 ad6: 238475MB <Seagate ST3250410AS 3.AAA> at ata3-master SATA150 ad8: 76324MB <WDC WD800JD-08MSA1 10.01E01> at ata4-master SATA150 SMP: AP CPU #1 Launched! I'm also getting this error when I do a gracful restart of apache [Thu Aug 16 05:12:16 2007] [warn] (22)Invalid argument: Failed to enable the 'httpready' Accept Filter [Thu Aug 16 05:12:16 2007] [warn] (22)Invalid argument: Failed to enable the 'httpready' Accept Filter and in my /boot/loader.conf I have added accf_data_load="YES" accf_http_load="YES" and kldstat reports this Id Refs Address Size Name 1 3 0xffffffff80100000 611660 kernel 2 1 0xffffffff80712000 718 accf_data.ko 3 1 0xffffffff80713000 1408 accf_http.ko When I do a proper restart I'm also getting these errors [Thu Aug 16 05:10:56 2007] [warn] child process 84880 still did not exit, sending a SIGTERM [Thu Aug 16 05:10:58 2007] [warn] child process 84880 still did not exit, sending a SIGTERM [Thu Aug 16 05:11:00 2007] [warn] child process 84880 still did not exit, sending a SIGTERM [Thu Aug 16 05:11:02 2007] [error] child process 84880 still did not exit, sending a SIGKILL In my custom kernel I have added or changed the following options SCHED_ULE options SMP options IPI_PREEMPTION options SC_DISABLE_REBOOT options LINPROCFS #options ACCEPT_FILTER_DATA #options ACCEPT_FILTER_HTTP device mptable # Enable PF device pf device pflog device pfsync options ALTQ options ALTQ_CBQ options ALTQ_RED options ALTQ_RIO options ALTQ_HFSC options ALTQ_PRIQ options ALTQ_NOPCC if any other info is needed, please let me know Please help me to fix this problem Thanks Reinhold
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?55628.212.99.207.3.1187285415.squirrel>