From owner-freebsd-questions  Mon Jun 17 11:05:25 1996
Return-Path: owner-questions
Received: (from root@localhost)
          by freefall.freebsd.org (8.7.5/8.7.3) id LAA16623
          for questions-outgoing; Mon, 17 Jun 1996 11:05:25 -0700 (PDT)
Received: from mail.rwth-aachen.de (mail.RWTH-Aachen.DE [137.226.144.9])
          by freefall.freebsd.org (8.7.5/8.7.3) with ESMTP id LAA16618
          for <freebsd-questions@freebsd.org>; Mon, 17 Jun 1996 11:05:22 -0700 (PDT)
Received: from gilberto.physik.rwth-aachen.de (gilberto.physik.rwth-aachen.de)
 by mail.rwth-aachen.de (PMDF V5.0-4 #13110)
 id <01I60XJCRNFK002HG3@mail.rwth-aachen.de>; Mon, 17 Jun 1996 18:49:53 +0100
Received: (from kuku@localhost) by gilberto.physik.rwth-aachen.de
 (8.6.11/8.6.9) id SAA06850; Mon, 17 Jun 1996 18:58:28 +0200
Date: Mon, 17 Jun 1996 18:58:27 +0200 (MET DST)
From: "Christoph P. Kukulies" <kuku@gilberto.physik.rwth-aachen.de>
Subject: Re: installing 2.1.0-RELEASE with WD8013EPC ethernet card - again
In-reply-to: <199606171613.KAA11354@refuge.Colorado.EDU>
To: jorgy@refuge.Colorado.EDU (Eric R. Jorgensen)
Cc: freebsd-questions@freebsd.org
Reply-to: Christoph Kukulies <kuku@gilberto.physik.rwth-aachen.de>
Message-id: <199606171658.SAA06850@gilberto.physik.rwth-aachen.de>
MIME-version: 1.0
X-Mailer: ELM [version 2.4ME+ PL16 (25)]
Content-type: text/plain; charset=US-ASCII
Content-transfer-encoding: 7bit
Sender: owner-questions@freebsd.org
X-Loop: FreeBSD.org
Precedence: bulk

> 
> Hello,
> 
> I sent the following message a while ago, but haven't heard anything
> on the list about it.  I suspect that people think that I'm doing
> something wrong that's trivial.  However, I'm sure that I've
> set the configuration correctly for the card (IP address, nameserver,
> netmask, etc.) correctly (I've been running ifconfig for 8 years), and
> I know that the card worked just fine with Win 95%, so it's not a
> card/cable problem.
> 
> The odd thing is that it says that "Network initialized correctly"
> but then conks out.
> 
> Thanks for any help,
> 
> Eric
> 
> 
> 
> 
> ------- Forwarded Message
> 
> To: freebsd-questions@freebsd.org
> Subject: problems installing 2.1.0-RELEASE with WD8013EPC ethernet card
> Date: Wed, 22 May 1996 12:53:36 -0600
> Sender: owner-questions@freebsd.org
> 
> 
> Hello,
> 
> I'm trying to get FreeBSD going on an HP Vectra P100 with an WD8013EPC
> ethernet card.  I'm doing an ftp install, but it conks out when trying
> to do the actual ftp.
> 
> >From the ALT-F2 debugging output:
> 
> DEBUG: init routine called for device ed1
> hostname: not found
> add net default: gateway xxx.xxx.xxx.xxx
> DEBUG: Network initialized correctly
> ed1: device timeout
> ed1: device timeout
> ed1: device timeout


Did you configure the WD8013EOC correctly? Especially, what irq is it
configured to? Afaik, one combination is 0x300/10, another may be 0x280/3
(the latter not being very friendly as irq 3 is also sio1 irq.).

I'd suggest make sure what io/irq/iomem it is set to and then I'd
type at the Boot: prompt   kernel -c to configure to kernel
to the actual card's parameters.


> 
> 
> If you need more information to figure this one out, let me know.
> (This machine was running Windows '95 and the ethernet was working
> fine.)
> 
> Thanks in advance,
> 
> Eric
> 
> 
> 
> ------- End of Forwarded Message
> 
> 

--Chris Christoph P. U. Kukulies kuku@gil.physik.rwth-aachen.de