Date: Mon, 23 Jan 2017 21:32:38 +0100 From: Kenneth Hatteland <kenneth.hatteland@kleppnett.no> To: Polytropon <freebsd@edvax.de>, Bernt Hansson <bah@bananmonarki.se> Cc: FreeBSD-questions@freebsd.org Subject: Re: Intel-driver failure after upgrade to 11.0 Release Message-ID: <7f13ab14-3701-0dd9-ce7e-8e6ff778b39a@kleppnett.no> In-Reply-To: <20170123195347.6f86be14.freebsd@edvax.de> References: <21331c8a-3219-1686-d00a-d1296d95dfdd@kleppnett.no> <8daf8f60-d5c3-c475-c15e-a09328044f47@bananmonarki.se> <20170123195347.6f86be14.freebsd@edvax.de>
next in thread | previous in thread | raw e-mail | index | archive | help
Dbus has always been enabled on my machines, so there should not be a problem then. Here is my rc.conf hostname="terra" keymap="norwegian.iso.kbd" ifconfig_em0="DHCP" ifconfig_em0_ipv6="inet6 accept_rtadv" ipv6_activate_all_interfaces="YES" ip6addrctl_policy="ipv6_prefer" sshd_enable="YES" moused_enable="YES" ntpd_enable="YES" dbus_enable="YES" hald_enable="YES" nfs_client_enable="YES" nfs_client_flags="-n 4" linux_enable="YES" cupsd_enable="YES" webcamd_enable="YES" smartd_enable="YES" #slim_enable="YES" # Synchronize system time ntpd_enable="YES" # Let ntpd make time jumps larger than 1000sec ntpd_flags="-g" devfs_system_ruleset="devfsrules_common" # Set dumpdev to "AUTO" to enable crash dumps, "NO" to disable dumpdev="NO" Blessed Be Kenneth On 01/23/17 19:53, Polytropon wrote: > On Mon, 23 Jan 2017 19:26:07 +0100, Bernt Hansson wrote: >> I've had some trouble with xorg, this is on 10.3, the screen went black >> but after a while the led on the monitor started to slowly flash >> like it was in sleep mode or something. > Usually monitors go to standby when there is no signal, > or when the signal is out of range. This leads to the > assumption that X didn't make the GPU to emit _any_ > signal, or a "distorted" signal - something which the > monitor cannot display anymore. > > > >> so I added this to /etc/rc.conf >> dbus_enable="YES" >> >> Now it works. > Modern X... incredible... :-/ > > >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?7f13ab14-3701-0dd9-ce7e-8e6ff778b39a>