Date: Fri, 12 Oct 2018 09:50:41 +0000 From: bugzilla-noreply@freebsd.org To: stable@FreeBSD.org Subject: [Bug 221146] [ixgbe] Problem with second laggport Message-ID: <bug-221146-1689-WT4bIgfuCT@https.bugs.freebsd.org/bugzilla/> In-Reply-To: <bug-221146-1689@https.bugs.freebsd.org/bugzilla/> References: <bug-221146-1689@https.bugs.freebsd.org/bugzilla/>
next in thread | previous in thread | raw e-mail | index | archive | help
https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=3D221146 Maciej Suszko <maciej@suszko.eu> changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |maciej@suszko.eu --- Comment #23 from Maciej Suszko <maciej@suszko.eu> --- Same problem here on Dell PowerEdge R740xd running 11.2-RELEASE-p4, sources modified to include latest mrsas drviers (DELL PERC H740P). root@host:~ # uname -a FreeBSD host 11.2-RELEASE-p4 FreeBSD 11.2-RELEASE-p4 #0 r338999M: Fri Sep 28 19:27:30 UTC 2018 root@host:/usr/obj/usr/src/sys/GENERIC amd64 root@host:~ # dmesg -a| grep '^ix[01]' ix0: <Intel(R) PRO/10GbE PCI-Express Network Driver, Version - 3.2.12-k> po= rt 0x4020-0x403f mem 0x9d900000-0x9d9fffff,0x9da04000-0x9da07fff at device 0.0 numa-domain 0 on pci5 ix0: Using MSI-X interrupts with 9 vectors ix0: Ethernet address: xx:xx:xx:xx:xx:98 ix0: PCI Express Bus: Speed 5.0GT/s Width x8 ix0: netmap queues/slots: TX 8/2048, RX 8/2048 ix1: <Intel(R) PRO/10GbE PCI-Express Network Driver, Version - 3.2.12-k> po= rt 0x4000-0x401f mem 0x9d800000-0x9d8fffff,0x9da00000-0x9da03fff at device 0.1 numa-domain 0 on pci5 ix1: Using MSI-X interrupts with 9 vectors ix1: Ethernet address: xx:xx:xx:xx:xx:9a ix1: PCI Express Bus: Speed 5.0GT/s Width x8 ix1: netmap queues/slots: TX 8/2048, RX 8/2048 ix0: link state changed to UP ix0: flags=3D8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 ix1: flags=3D8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500 ix1: flags=3D8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500 ix1: link state changed to UP ix1: link state changed to DOWN ix1: link state changed to UP I can attach ix1 to lagg0 later, after system boot... doing this within rc.= conf (in pair with ix0) does not work, ix1 shows 'no carrier' and it doesn't cha= nge it's state after removing from lagg0, interface down/up. root@host:~ # ifconfig ix0 ix0: flags=3D8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 =20=20=20=20=20=20=20 options=3De407bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSU= M,TSO4,TSO6,LRO,VLAN_HWTSO,RXCSUM_IPV6,TXCSUM_IPV6> ether xx:xx:xx:xx:xx:98 hwaddr xx:xx:xx:xx:xx:98 nd6 options=3D29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> media: Ethernet autoselect (10Gbase-Twinax <full-duplex,rxpause,txpause>) status: active root@host:~ # ifconfig ix1 ix1: flags=3D8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 =20=20=20=20=20=20=20 options=3De407bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSU= M,TSO4,TSO6,LRO,VLAN_HWTSO,RXCSUM_IPV6,TXCSUM_IPV6> ether xx:xx:xx:xx:xx:98 hwaddr xx:xx:xx:xx:xx:9a nd6 options=3D29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> media: Ethernet autoselect (10Gbase-Twinax <full-duplex,rxpause,txpause>) status: active root@host:~ # ifconfig lagg0 lagg0: flags=3D8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 15= 00 =20=20=20=20 options=3De407bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSU= M,TSO4,TSO6,LRO,VLAN_HWTSO,RXCSUM_IPV6,TXCSUM_IPV6> ether xx:xx:xx:xx:xx:98 nd6 options=3D29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> media: Ethernet autoselect status: active groups: lagg=20 laggproto lacp lagghash l2,l3,l4 laggport: ix0 flags=3D1c<ACTIVE,COLLECTING,DISTRIBUTING> laggport: ix1 flags=3D1c<ACTIVE,COLLECTING,DISTRIBUTING> --=20 You are receiving this mail because: You are on the CC list for the bug.=
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?bug-221146-1689-WT4bIgfuCT>