Date: Fri, 05 Mar 1999 16:54:18 -0500 From: "Louis A. Mamakos" <louie@UU.NET> To: freebsd-scsi@freebsd.org Subject: problem with aic7880 SCSI controller on CompactPCI system Message-ID: <79487.920670858@sayshell.corp.us.uu.net>
next in thread | raw e-mail | index | archive | help
This is a multipart MIME message.
--==_Exmh_16937519200
Content-Type: text/plain; charset=us-ascii
I've got a Motorola CPV5000 CompactPCI based system I'm trying to get
FreeBSD running on. This is Pentium-based single board computer in a
CompactPCI form factor, with a bunch of on-board peripherals. This board,
absent the use of the SCSI controller is known to work pretty will with
FreeBSD varients in an embedded system environment.
There seems to be a problem with the support of the on-board aic7880
Ultra SCSI controller on the board. If I disable the SCSI controller
in the BIOS, then I can boot up just fine, and FreeBSD discovers the
on-board 80MB IDE Flash "disk" and starts up sysinstall. When the
SCSI controller is enabled, I have the problem listed below.
I know that the SCSI bus actually works; I can put a FreeBSD
distribution CD in the CDROM drive (SCSI target 6), and boot up just
fine, but this is done via the BIOS I/O in /boot/loader. The adaptec
SCSI BIOS also finds the two targets on the SCSI bus (the other being
a Seagate ST34573W as SCSI target 0).
The boot sequence below, captured from the serial console is a result
of waiting a few hours for all of the probes to timeout, etc. I think
that the complaint about the cable configuration is bogus, in the
sense that termination is done automatically based upon connectors
being plugged into either of the front panel or internal 68pin SCSI
connector; this board doesn't even have a physical 50 pin connector
available. There are terminators that are enabled automatically
should a SCSI bus connector not have a cable attached.
Before I dive into trying to figure this code out, I'd appreciate it
if someone has a hint or fix for this these symptoms, or has seen
something like this before.
I've tried this with a fairly recent 4.0-current, the 3.1-release CD
as well as a 3.0 snapshot from last August; I see the same sort of
symptoms. Even after enduring the multi-hour wait for all this to
happen, the disk and CDROM drive don't get attached as da0 and cd0;
the best that happens is they get attached as pass0 and pass1.
Thanks in advance for any pointers, hints or fixes.
Louis Mamakos
--==_Exmh_16937519200
Content-Type: text/plain ; name="boot2.log"; charset=us-ascii
Content-Description: boot.log
Content-Disposition: attachment; filename="cpciboot2.log"
Console: serial port
BIOS drive A: is disk0
BIOS drive C: is disk1
FreeBSD/i386 bootstrap loader, Revision 0.5 639/65535kB
(root@usw2.freebsd.org, Wed Mar 3 13:32:57 GMT 1999)
/kernel text=0x1b8f82 data=0x1dc50+0x20978 syms=[0x4+0x25660+0x2508a]
Please insert MFS root floppy and press enter:
BIOS basemem (639K) != RTC basemem (640K), setting to BIOS value
Copyright (c) 1992-1999 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 4.0-CURRENT #2: Fri Mar 5 10:06:52 EST 1999
louie@sayshell.corp.us.uu.net:/y/louie/src/sys/compile/GENERIC
Calibrating clock(s) ... TSC clock: 233915951 Hz, i8254 clock: 1193450 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
Timecounter "TSC" frequency 233864239 Hz
CPU: Pentium/P55C (233.86-MHz 586-class CPU)
Origin = "GenuineIntel" Id = 0x543 Stepping=3
Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX>
real memory = 134217728 (131072K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009efff, 647168 bytes (158 pages)
0x00621000 - 0x07ff3fff, 127741952 bytes (31187 pages)
avail memory = 124293120 (121380K bytes)
Found BIOS32 Service Directory header at 0xf00fdb70
Entry = 0xfdb80 (0xf00fdb80) Rev = 0 Len = 1
PCI BIOS entry at 0xdba1
SMIBIOS header at 0xf00f0070
Version 2.0
Table at 0xf0480, 24 entries, 920 bytes, largest entry 116 bytes
DMI header at 0xf00f0080
Version 2.0
Table at 0xf0480, 24 entries, 920 bytes
Other BIOS signatures found:
ACPI: 00000000
$PnP: 000f7c10
Preloaded elf kernel "kernel" at 0xf0614000.
Preloaded mfs_root "/mfsroot" at 0xf061409c.
Math emulator present
pci_open(1): mode 1 addr port (0x0cf8) is 0x80000058
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=12508086)
Probing for devices on PCI bus 0:
found-> vendor=0x8086, dev=0x1250, revid=0x03
class=06-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
chip0: <Intel 82439> rev 0x03 on pci0.0.0
found-> vendor=0x8086, dev=0x7000, revid=0x01
class=06-01-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
chip1: <Intel 82371SB PCI to ISA bridge> rev 0x01 on pci0.7.0
I/O Recovery Timing: 8-bit 1 clocks, 16-bit 1 clocks
Extended BIOS: enabled
Lower BIOS: enabled
Coprocessor IRQ13: enabled
Mouse IRQ12: enabled
Interrupt Routing: A: disabled, B: IRQ9, C: disabled, D: IRQ10
MB0: IRQ15, MB1:
found-> vendor=0x8086, dev=0x7010, revid=0x00
class=01-01-80, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[0]: type 4, range 32, base 0000ffa0, size 4
ide_pci0: <Intel PIIX3 Bus-master IDE controller> rev 0x00 on pci0.7.1
intel_piix_status: primary master/slave sample = 5, master/slave recovery = 4
intel_piix_status: primary master fastDMAonly disabled, pre/post disabled,
intel_piix_status: IORDY sampling disabled,
intel_piix_status: fast PIO disabled
intel_piix_status: primary master/slave sample = 5, master/slave recovery = 4
intel_piix_status: primary slave fastDMAonly disabled, pre/post disabled,
intel_piix_status: IORDY sampling disabled,
intel_piix_status: fast PIO disabled
ide_pci: busmaster 0 status: 04 from port: 0000ffa2
intel_piix_status: secondary master/slave sample = 5, master/slave recovery = 4
intel_piix_status: secondary master fastDMAonly disabled, pre/post disabled,
intel_piix_status: IORDY sampling disabled,
intel_piix_status: fast PIO disabled
intel_piix_status: secondary master/slave sample = 5, master/slave recovery = 4
intel_piix_status: secondary slave fastDMAonly disabled, pre/post disabled,
intel_piix_status: IORDY sampling disabled,
intel_piix_status: fast PIO disabled
ide_pci: busmaster 1 status: 04 from port: 0000ffaa
found-> vendor=0x8086, dev=0x7020, revid=0x01
class=0c-03-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=d, irq=10
map[0]: type 4, range 32, base 0000ef40, size 5
found-> vendor=0x9004, dev=0x8078, revid=0x01
class=01-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=10
map[0]: type 4, range 32, base 0000ec00, size 8
map[1]: type 1, range 32, base ffaf7000, size 12
ahc0: <Adaptec aic7880 Ultra SCSI adapter> rev 0x01 int a irq 10 on pci0.17.0
ahc0: Reading SEEPROM...done.
ahc0: internal 50 cable is present, internal 68 cable is present
ahc0: external cable is present
ahc0: BIOS eeprom not present
ahc0: Illegal cable configuration!!. Only two connectors on the adapter may be
used at a time!
ahc0: aic7880 Wide Channel A, SCSI Id=7, 16/255 SCBs
ahc0: Downloading Sequencer Program... 413 instructions downloaded
found-> vendor=0x1011, dev=0x0022, revid=0x03
class=06-04-00, hdrtype=0x01, mfdev=0
subordinatebus=1 secondarybus=1
chip2: <PCI to PCI bridge (vendor=1011 device=0022)> rev 0x03 on pci0.18.0
found-> vendor=0x1013, dev=0x00b8, revid=0x00
class=03-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[0]: type 3, range 32, base fd000000, size 24
vga0: <Cirrus Logic GD5446 SVGA controller> rev 0x00 on pci0.19.0
found-> vendor=0x8086, dev=0x1229, revid=0x05
class=02-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=9
map[0]: type 3, range 32, base febff000, size 12
map[1]: type 4, range 32, base 0000ef80, size 5
map[2]: type 1, range 32, base ff900000, size 20
fxp0: <Intel EtherExpress Pro 10/100B Ethernet> rev 0x05 int a irq 9 on
pci0.20.0
fxp0: Ethernet address 08:00:3e:28:ff:b9
Probing for devices on PCI bus 1:
found-> vendor=0x12e2, dev=0x4013, revid=0x02
class=ff-ff-ff, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=10
map[0]: type 1, range 32, base ff5ff000, size 12
map[1]: type 1, range 32, base ff5fe000, size 12
Initializing PnP override table
Probing for PnP devices:
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
No Plug-n-Play devices were found
Probing for devices on the ISA bus:
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbdc: RESET_KBD return code:00fa
kbdc: RESET_KBD status:00aa
sc0 on isa
sc0: fb0 kbd0
sc0: VGA color <16 virtual consoles, flags=0x0>
ed0 not found at 0x280
fe0 not found at 0x300
atkbdc0 at 0x60-0x6f on motherboard
atkbd0 irq 1 on isa
kbd0: atkbd0, AT 101/102 (2), config:0x10000, flags:0x3d0000
psm0: current command byte:0065
kbdc: TEST_AUX_PORT status:0000
kbdc: RESET_AUX return code:00fe
kbdc: RESET_AUX return code:00fe
kbdc: RESET_AUX return code:00fe
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
psm0: failed to reset the aux device.
psm0 not found
sio0: irq maps: 0x1 0x11 0x1 0x1
sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa
sio0: type 16550A, console
sio1: irq maps: 0x1 0x9 0x1 0x1
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
sio2: disabled, not probed.
sio3: disabled, not probed.
ppc0 not found
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: FIFO enabled, 8 bytes threshold
fd0: 1.44MB 3.5in
wdc0 at 0x1f0-0x1f7 irq 14 on isa
wdc0: unit 0 (wd0): <SunDisk SDIB-80>
wd0: 80MB (163840 sectors), 640 cyls, 8 heads, 32 S/T, 512 B/S
wd0: ATA INQUIRE valid = 0001, dmamword = 0000, apio = 0000, udma = 0000
wdc1 not found at 0x170
wt0 not found at 0x300
mcd0: timeout getting status
mcd0 not found at 0x300
matcdc0 not found at 0x230
scd0 not found at 0x230
ie0: unknown board_id: f000
ie0 not found at 0x300
ep0 not found at 0x300
ex0 not found
le0 not found at 0x300
lnc0 not found at 0x280
ze0 not found at 0x300
zp0 not found at 0x300
cs0 not found at 0x300
adv0 not found at 0x330
bt0: Failed Status Reg Test - ff
bt0: Failed Status Reg Test - ff
bt0: Failed Status Reg Test - ff
bt0: Failed Status Reg Test - ff
bt0: Failed Status Reg Test - ff
bt0: Failed Status Reg Test - ff
bt0 not found at 0x134
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0 not found at 0x134
vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3b0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xf00b8000 size:32k gran:32k, buf:0x0 size:0k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
npx0 on motherboard
npx0: INT 16 interface
i586_bzero() bandwidth = 175377060 bytes/sec
bzero() bandwidth = 88589652 bytes/sec
apm0: disabled, not probed.
imasks: bio c0084040, tty c007021a, net c007021a
BIOS Geometries:
0:00000000 0..0=1 cylinders, 0..0=1 heads, 1..0=0 sectors
1:00000000 0..0=1 cylinders, 0..0=1 heads, 1..0=0 sectors
2:00000000 0..0=1 cylinders, 0..0=1 heads, 1..0=0 sectors
3:00000000 0..0=1 cylinders, 0..0=1 heads, 1..0=0 sectors
4:00000000 0..0=1 cylinders, 0..0=1 heads, 1..0=0 sectors
5:00000000 0..0=1 cylinders, 0..0=1 heads, 1..0=0 sectors
6:00000000 0..0=1 cylinders, 0..0=1 heads, 1..0=0 sectors
7:00000000 0..0=1 cylinders, 0..0=1 heads, 1..0=0 sectors
0 accounted for
Device configuration finished.
Intel Pentium detected, installing workaround for F00F bug
new masks: bio c0084040, tty c007021a, net c007021a
Waiting 15 seconds for SCSI devices to settle
(noperiph:ahc0:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted.
(probe0:ahc0:0:0:0): SCB 0x0 - timed out while idle, LASTPHASE == 0x1, SEQADDR
== 0x18c
(probe0:ahc0:0:0:0): Queuing a BDR SCB
(probe0:ahc0:0:0:0): SCB 0x0 - timed out while idle, LASTPHASE == 0x1, SEQADDR
== 0x18c
(probe0:ahc0:0:0:0): no longer in timeout, status = 34b
ahc0: Issued Channel A Bus Reset. 15 SCBs aborted
(probe1:ahc0:0:1:0): SCB 0x0 - timed out while idle, LASTPHASE == 0x1, SEQADDR
== 0x18c
(probe1:ahc0:0:1:0): Queuing a BDR SCB
(probe1:ahc0:0:1:0): SCB 0x0 - timed out while idle, LASTPHASE == 0x1, SEQADDR
== 0x18c
(probe1:ahc0:0:1:0): no longer in timeout, status = 34b
ahc0: Issued Channel A Bus Reset. 15 SCBs aborted
(probe2:ahc0:0:2:0): SCB 0x0 - timed out while idle, LASTPHASE == 0x1, SEQADDR
== 0x18c
(probe2:ahc0:0:2:0): Queuing a BDR SCB
(probe2:ahc0:0:2:0): SCB 0x0 - timed out while idle, LASTPHASE == 0x1, SEQADDR
== 0x18c
(probe2:ahc0:0:2:0): no longer in timeout, status = 34b
ahc0: Issued Channel A Bus Reset. 15 SCBs aborted
ahc0: Selection Timeout on A:3. 1 SCBs aborted
(probe4:ahc0:0:4:0): SCB 0xe - timed out while idle, LASTPHASE == 0x1, SEQADDR
== 0x18c
(probe4:ahc0:0:4:0): Queuing a BDR SCB
(probe4:ahc0:0:4:0): SCB 0xe - timed out while idle, LASTPHASE == 0x1, SEQADDR
== 0x18c
(probe4:ahc0:0:4:0): no longer in timeout, status = 34b
ahc0: Issued Channel A Bus Reset. 14 SCBs aborted
ahc0: Selection Timeout on A:5. 1 SCBs aborted
(probe6:ahc0:0:6:0): SCB 0x1 - timed out while idle, LASTPHASE == 0x1, SEQADDR
== 0x18c
(probe6:ahc0:0:6:0): Queuing a BDR SCB
(probe6:ahc0:0:6:0): SCB 0x1 - timed out while idle, LASTPHASE == 0x1, SEQADDR
== 0x18c
(probe6:ahc0:0:6:0): no longer in timeout, status = 34b
ahc0: Issued Channel A Bus Reset. 13 SCBs aborted
ahc0: Selection Timeout on A:8. 1 SCBs aborted
(probe8:ahc0:0:9:0): SCB 0xd - timed out while idle, LASTPHASE == 0x1, SEQADDR
== 0x18c
(probe8:ahc0:0:9:0): Queuing a BDR SCB
(probe8:ahc0:0:9:0): SCB 0xd - timed out while idle, LASTPHASE == 0x1, SEQADDR
== 0x18c
(probe8:ahc0:0:9:0): no longer in timeout, status = 34b
ahc0: Issued Channel A Bus Reset. 12 SCBs aborted
ahc0: Selection Timeout on A:10. 1 SCBs aborted
ahc0: Selection Timeout on A:11. 1 SCBs aborted
(probe11:ahc0:0:12:0): SCB 0x3 - timed out while idle, LASTPHASE == 0x1,
SEQADDR == 0x18c
(probe11:ahc0:0:12:0): Queuing a BDR SCB
(probe11:ahc0:0:12:0): SCB 0x3 - timed out while idle, LASTPHASE == 0x1,
SEQADDR == 0x18c
(probe11:ahc0:0:12:0): no longer in timeout, status = 34b
ahc0: Issued Channel A Bus Reset. 10 SCBs aborted
ahc0: Selection Timeout on A:13. 1 SCBs aborted
(probe13:ahc0:0:14:0): SCB 0xc - timed out while idle, LASTPHASE == 0x1,
SEQADDR == 0x18c
(probe13:ahc0:0:14:0): Queuing a BDR SCB
(probe13:ahc0:0:14:0): SCB 0xc - timed out while idle, LASTPHASE == 0x1,
SEQADDR == 0x18c
(probe13:ahc0:0:14:0): no longer in timeout, status = 34b
ahc0: Issued Channel A Bus Reset. 9 SCBs aborted
(probe14:ahc0:0:15:0): SCB 0xc - timed out while idle, LASTPHASE == 0x1,
SEQADDR == 0x18c
(probe14:ahc0:0:15:0): Queuing a BDR SCB
(probe14:ahc0:0:15:0): SCB 0xc - timed out while idle, LASTPHASE == 0x1,
SEQADDR == 0x18c
(probe14:ahc0:0:15:0): no longer in timeout, status = 34b
ahc0: Issued Channel A Bus Reset. 9 SCBs aborted
ahc0: Selection Timeout on A:1. 1 SCBs aborted
(probe2:ahc0:0:2:0): SCB 0xa - timed out while idle, LASTPHASE == 0x1, SEQADDR
== 0x18c
(probe2:ahc0:0:2:0): Queuing a BDR SCB
(probe2:ahc0:0:2:0): SCB 0xa - timed out while idle, LASTPHASE == 0x1, SEQADDR
== 0x18c
(probe2:ahc0:0:2:0): no longer in timeout, status = 34b
ahc0: Issued Channel A Bus Reset. 8 SCBs aborted
(probe4:ahc0:0:4:0): SCB 0xa - timed out while idle, LASTPHASE == 0x1, SEQADDR
== 0x18c
(probe4:ahc0:0:4:0): Queuing a BDR SCB
(probe4:ahc0:0:4:0): SCB 0xa - timed out while idle, LASTPHASE == 0x1, SEQADDR
== 0x18c
(probe4:ahc0:0:4:0): no longer in timeout, status = 34b
ahc0: Issued Channel A Bus Reset. 8 SCBs aborted
(probe6:ahc0:0:6:0): SCB 0xa - timed out while idle, LASTPHASE == 0x1, SEQADDR
== 0x18c
(probe6:ahc0:0:6:0): Queuing a BDR SCB
(probe6:ahc0:0:6:0): SCB 0xa - timed out while idle, LASTPHASE == 0x1, SEQADDR
== 0x18c
(probe6:ahc0:0:6:0): no longer in timeout, status = 34b
ahc0: Issued Channel A Bus Reset. 8 SCBs aborted
(probe8:ahc0:0:9:0): SCB 0xa - timed out while idle, LASTPHASE == 0x1, SEQADDR
== 0x18c
(probe8:ahc0:0:9:0): Queuing a BDR SCB
(probe8:ahc0:0:9:0): SCB 0xa - timed out while idle, LASTPHASE == 0x1, SEQADDR
== 0x18c
(probe8:ahc0:0:9:0): no longer in timeout, status = 34b
ahc0: Issued Channel A Bus Reset. 8 SCBs aborted
ahc0: Selection Timeout on A:12. 1 SCBs aborted
ahc0: Selection Timeout on A:14. 1 SCBs aborted
(probe14:ahc0:0:15:0): SCB 0x8 - timed out while idle, LASTPHASE == 0x1,
SEQADDR == 0x18c
(probe14:ahc0:0:15:0): Queuing a BDR SCB
(probe14:ahc0:0:15:0): SCB 0x8 - timed out while idle, LASTPHASE == 0x1,
SEQADDR == 0x18c
(probe14:ahc0:0:15:0): no longer in timeout, status = 34b
ahc0: Issued Channel A Bus Reset. 6 SCBs aborted
(probe0:ahc0:0:0:0): SCB 0x8 - timed out while idle, LASTPHASE == 0x1, SEQADDR
== 0x18c
(probe0:ahc0:0:0:0): Queuing a BDR SCB
(probe0:ahc0:0:0:0): SCB 0x8 - timed out while idle, LASTPHASE == 0x1, SEQADDR
== 0x18c
(probe0:ahc0:0:0:0): no longer in timeout, status = 34b
ahc0: Issued Channel A Bus Reset. 6 SCBs aborted
ahc0: Selection Timeout on A:2. 1 SCBs aborted
(probe4:ahc0:0:4:0): SCB 0x7 - timed out while idle, LASTPHASE == 0x1, SEQADDR
== 0x18c
(probe4:ahc0:0:4:0): Queuing a BDR SCB
(probe4:ahc0:0:4:0): SCB 0x7 - timed out while idle, LASTPHASE == 0x1, SEQADDR
== 0x18c
(probe4:ahc0:0:4:0): no longer in timeout, status = 34b
ahc0: Issued Channel A Bus Reset. 5 SCBs aborted
(probe6:ahc0:0:6:0): SCB 0x7 - timed out while idle, LASTPHASE == 0x1, SEQADDR
== 0x18c
(probe6:ahc0:0:6:0): Queuing a BDR SCB
(probe6:ahc0:0:6:0): SCB 0x7 - timed out while idle, LASTPHASE == 0x1, SEQADDR
== 0x18c
(probe6:ahc0:0:6:0): no longer in timeout, status = 34b
ahc0: Issued Channel A Bus Reset. 5 SCBs aborted
ahc0: Selection Timeout on A:9. 1 SCBs aborted
(probe14:ahc0:0:15:0): SCB 0x6 - timed out while idle, LASTPHASE == 0x1,
SEQADDR == 0x18c
(probe14:ahc0:0:15:0): Queuing a BDR SCB
(probe14:ahc0:0:15:0): SCB 0x6 - timed out while idle, LASTPHASE == 0x1,
SEQADDR == 0x18c
(probe14:ahc0:0:15:0): no longer in timeout, status = 34b
ahc0: Issued Channel A Bus Reset. 4 SCBs aborted
(probe0:ahc0:0:0:0): SCB 0x6 - timed out while idle, LASTPHASE == 0x1, SEQADDR
== 0x18c
(probe0:ahc0:0:0:0): Queuing a BDR SCB
(probe0:ahc0:0:0:0): SCB 0x6 - timed out while idle, LASTPHASE == 0x1, SEQADDR
== 0x18c
(probe0:ahc0:0:0:0): no longer in timeout, status = 34b
ahc0: Issued Channel A Bus Reset. 4 SCBs aborted
(probe6:ahc0:0:6:0): SCB 0xc - timed out while idle, LASTPHASE == 0x1, SEQADDR
== 0x18c
(probe6:ahc0:0:6:0): Queuing a BDR SCB
(probe6:ahc0:0:6:0): SCB 0xc - timed out while idle, LASTPHASE == 0x1, SEQADDR
== 0x18c
(probe6:ahc0:0:6:0): no longer in timeout, status = 34b
ahc0: Issued Channel A Bus Reset. 4 SCBs aborted
ahc0: Selection Timeout on A:15. 1 SCBs aborted
(probe0:ahc0:0:0:0): SCB 0x4 - timed out while idle, LASTPHASE == 0x1, SEQADDR
== 0x18c
(probe0:ahc0:0:0:0): Queuing a BDR SCB
(probe0:ahc0:0:0:0): SCB 0x4 - timed out while idle, LASTPHASE == 0x1, SEQADDR
== 0x18c
(probe0:ahc0:0:0:0): no longer in timeout, status = 34b
ahc0: Issued Channel A Bus Reset. 3 SCBs aborted
(probe4:ahc0:0:4:0): SCB 0x4 - timed out while idle, LASTPHASE == 0x1, SEQADDR
== 0x18c
(probe4:ahc0:0:4:0): Queuing a BDR SCB
(probe4:ahc0:0:4:0): SCB 0x4 - timed out while idle, LASTPHASE == 0x1, SEQADDR
== 0x18c
(probe4:ahc0:0:4:0): no longer in timeout, status = 34b
ahc0: Issued Channel A Bus Reset. 3 SCBs aborted
(probe0:ahc0:0:0:0): SCB 0x5 - timed out while idle, LASTPHASE == 0x1, SEQADDR
== 0x18c
(probe0:ahc0:0:0:0): Queuing a BDR SCB
(probe0:ahc0:0:0:0): SCB 0x5 - timed out while idle, LASTPHASE == 0x1, SEQADDR
== 0x18c
(probe0:ahc0:0:0:0): no longer in timeout, status = 34b
ahc0: Issued Channel A Bus Reset. 3 SCBs aborted
ahc0: Selection Timeout on A:4. 1 SCBs aborted
(probe6:ahc0:0:6:0): SCB 0x4 - timed out in message in phase, SEQADDR == 0x18c
(probe6:ahc0:0:6:0): BDR message in message buffer
(probe6:ahc0:0:6:0): SCB 0x4 - timed out in message in phase, SEQADDR == 0x18c
(probe6:ahc0:0:6:0): no longer in timeout, status = 34b
ahc0: Issued Channel A Bus Reset. 2 SCBs aborted
(probe0:ahc0:0:0:0): SCB 0x4 - timed out while idle, LASTPHASE == 0x1, SEQADDR
== 0x18c
(probe0:ahc0:0:0:0): Queuing a BDR SCB
(probe0:ahc0:0:0:0): SCB 0x4 - timed out while idle, LASTPHASE == 0x1, SEQADDR
== 0x18c
(probe0:ahc0:0:0:0): no longer in timeout, status = 34b
ahc0: Issued Channel A Bus Reset. 2 SCBs aborted
(probe6:ahc0:0:6:0): SCB 0x4 - timed out while idle, LASTPHASE == 0x1, SEQADDR
== 0x18c
(probe6:ahc0:0:6:0): Queuing a BDR SCB
(probe6:ahc0:0:6:0): SCB 0x4 - timed out while idle, LASTPHASE == 0x1, SEQADDR
== 0x18c
(probe6:ahc0:0:6:0): no longer in timeout, status = 34b
ahc0: Issued Channel A Bus Reset. 2 SCBs aborted
(probe0:ahc0:0:0:0): SCB 0x4 - timed out while idle, LASTPHASE == 0x1, SEQADDR
== 0x18c
(probe0:ahc0:0:0:0): Queuing a BDR SCB
(probe0:ahc0:0:0:0): SCB 0x4 - timed out while idle, LASTPHASE == 0x1, SEQADDR
== 0x18c
(probe0:ahc0:0:0:0): no longer in timeout, status = 34b
ahc0: Issued Channel A Bus Reset. 2 SCBs aborted
(probe6:ahc0:0:6:0): SCB 0x4 - timed out while idle, LASTPHASE == 0x1, SEQADDR
== 0x18c
(probe6:ahc0:0:6:0): Queuing a BDR SCB
(probe6:ahc0:0:6:0): SCB 0x4 - timed out while idle, LASTPHASE == 0x1, SEQADDR
== 0x18c
(probe6:ahc0:0:6:0): no longer in timeout, status = 34b
ahc0: Issued Channel A Bus Reset. 2 SCBs aborted
(probe0:ahc0:0:0:0): SCB 0x4 - timed out while idle, LASTPHASE == 0x1, SEQADDR
== 0x18c
(probe0:ahc0:0:0:0): Queuing a BDR SCB
(probe0:ahc0:0:0:0): SCB 0x4 - timed out while idle, LASTPHASE == 0x1, SEQADDR
== 0x18c
(probe0:ahc0:0:0:0): no longer in timeout, status = 34b
ahc0: Issued Channel A Bus Reset. 2 SCBs aborted
(probe6:ahc0:0:6:0): SCB 0x4 - timed out while idle, LASTPHASE == 0x1, SEQADDR
== 0x18c
(probe6:ahc0:0:6:0): Queuing a BDR SCB
(probe6:ahc0:0:6:0): SCB 0x4 - timed out while idle, LASTPHASE == 0x1, SEQADDR
== 0x18c
(probe6:ahc0:0:6:0): no longer in timeout, status = 34b
ahc0: Issued Channel A Bus Reset. 2 SCBs aborted
(probe0:ahc0:0:0:0): SCB 0x4 - timed out while idle, LASTPHASE == 0x1, SEQADDR
== 0x18c
(probe0:ahc0:0:0:0): Queuing a BDR SCB
(probe0:ahc0:0:0:0): SCB 0x4 - timed out while idle, LASTPHASE == 0x1, SEQADDR
== 0x18c
(probe0:ahc0:0:0:0): no longer in timeout, status = 34b
ahc0: Issued Channel A Bus Reset. 2 SCBs aborted
(probe6:ahc0:0:6:0): SCB 0x4 - timed out while idle, LASTPHASE == 0x1, SEQADDR
== 0x18c
(probe6:ahc0:0:6:0): Queuing a BDR SCB
(probe6:ahc0:0:6:0): SCB 0x4 - timed out while idle, LASTPHASE == 0x1, SEQADDR
== 0x18c
(probe6:ahc0:0:6:0): no longer in timeout, status = 34b
ahc0: Issued Channel A Bus Reset. 2 SCBs aborted
(probe0:ahc0:0:0:0): SCB 0x4 - timed out while idle, LASTPHASE == 0x1, SEQADDR
== 0x18c
(probe0:ahc0:0:0:0): Queuing a BDR SCB
(probe0:ahc0:0:0:0): SCB 0x4 - timed out while idle, LASTPHASE == 0x1, SEQADDR
== 0x18c
(probe0:ahc0:0:0:0): no longer in timeout, status = 34b
ahc0: Issued Channel A Bus Reset. 2 SCBs aborted
(probe0:ahc0:0:0:0): SCB 0x4 - timed out while idle, LASTPHASE == 0x1, SEQADDR
== 0x18c
(probe0:ahc0:0:0:0): Queuing a BDR SCB
(probe0:ahc0:0:0:0): SCB 0x4 - timed out while idle, LASTPHASE == 0x1, SEQADDR
== 0x18c
(probe0:ahc0:0:0:0): no longer in timeout, status = 34b
ahc0: Issued Channel A Bus Reset. 2 SCBs aborted
ahc0: target 6 synchronous at 10.0MHz, offset = 0xf
(probe0:ahc0:0:0:0): SCB 0x6 - timed out while idle, LASTPHASE == 0x1, SEQADDR
== 0x18c
(probe0:ahc0:0:0:0): Queuing a BDR SCB
(probe0:ahc0:0:0:0): SCB 0x6 - timed out while idle, LASTPHASE == 0x1, SEQADDR
== 0x18c
(probe0:ahc0:0:0:0): no longer in timeout, status = 34b
ahc0: target 6 using asynchronous transfers
ahc0: Issued Channel A Bus Reset. 2 SCBs aborted
ahc0: target 6 synchronous at 10.0MHz, offset = 0xf
(probe0:ahc0:0:0:1): SCB 0x4 - timed out while idle, LASTPHASE == 0x1, SEQADDR
== 0x18c
(probe0:ahc0:0:0:1): Queuing a BDR SCB
(probe0:ahc0:0:0:1): SCB 0x4 - timed out while idle, LASTPHASE == 0x1, SEQADDR
== 0x18c
(probe0:ahc0:0:0:1): no longer in timeout, status = 34b
ahc0: target 6 using asynchronous transfers
ahc0: Issued Channel A Bus Reset. 2 SCBs aborted
ahc0: target 6 synchronous at 10.0MHz, offset = 0xf
(probe0:ahc0:0:0:1): SCB 0x6 - timed out while idle, LASTPHASE == 0x1, SEQADDR
== 0x18c
(probe0:ahc0:0:0:1): Queuing a BDR SCB
(probe0:ahc0:0:0:1): SCB 0x6 - timed out while idle, LASTPHASE == 0x1, SEQADDR
== 0x18c
(probe0:ahc0:0:0:1): no longer in timeout, status = 34b
ahc0: target 6 using asynchronous transfers
ahc0: Issued Channel A Bus Reset. 2 SCBs aborted
(probe1:ahc0:0:6:4): SCB 0x6 - timed out while idle, LASTPHASE == 0x1, SEQADDR
== 0x18c
(probe1:ahc0:0:6:4): Queuing a BDR SCB
(probe1:ahc0:0:6:4): SCB 0x6 - timed out while idle, LASTPHASE == 0x1, SEQADDR
== 0x18c
(probe1:ahc0:0:6:4): no longer in timeout, status = 34b
ahc0: Issued Channel A Bus Reset. 2 SCBs aborted
(probe0:ahc0:0:0:1): SCB 0x6 - timed out while idle, LASTPHASE == 0x1, SEQADDR
== 0x18c
(probe0:ahc0:0:0:1): Queuing a BDR SCB
(probe0:ahc0:0:0:1): SCB 0x6 - timed out while idle, LASTPHASE == 0x1, SEQADDR
== 0x18c
(probe0:ahc0:0:0:1): no longer in timeout, status = 34b
ahc0: Issued Channel A Bus Reset. 2 SCBs aborted
ahc0: target 6 synchronous at 10.0MHz, offset = 0xf
(probe0:ahc0:0:0:1): SCB 0x4 - timed out while idle, LASTPHASE == 0x1, SEQADDR
== 0x18c
(probe0:ahc0:0:0:1): Queuing a BDR SCB
(probe0:ahc0:0:0:1): SCB 0x4 - timed out while idle, LASTPHASE == 0x1, SEQADDR
== 0x18c
(probe0:ahc0:0:0:1): no longer in timeout, status = 34b
ahc0: target 6 using asynchronous transfers
ahc0: Issued Channel A Bus Reset. 2 SCBs aborted
ahc0: target 6 synchronous at 10.0MHz, offset = 0xf
(probe0:ahc0:0:0:1): SCB 0x6 - timed out while idle, LASTPHASE == 0x1, SEQADDR
== 0x18c
(probe0:ahc0:0:0:1): Queuing a BDR SCB
(probe0:ahc0:0:0:1): SCB 0x6 - timed out while idle, LASTPHASE == 0x1, SEQADDR
== 0x18c
(probe0:ahc0:0:0:1): no longer in timeout, status = 34b
ahc0: target 6 using asynchronous transfers
ahc0: Issued Channel A Bus Reset. 2 SCBs aborted
(probe1:ahc0:0:6:6): SCB 0x6 - timed out while idle, LASTPHASE == 0x1, SEQADDR
== 0x18c
(probe1:ahc0:0:6:6): Queuing a BDR SCB
(probe1:ahc0:0:6:6): SCB 0x6 - timed out while idle, LASTPHASE == 0x1, SEQADDR
== 0x18c
(probe1:ahc0:0:6:6): no longer in timeout, status = 34b
ahc0: Issued Channel A Bus Reset. 2 SCBs aborted
ahc0: target 0 using 16bit transfers
ahc0: target 0 synchronous at 10.0MHz, offset = 0x8
(probe0:ahc0:0:0:2): SCB 0x6 - timed out while idle, LASTPHASE == 0x1, SEQADDR
== 0x18c
(probe0:ahc0:0:0:2): Queuing a BDR SCB
(probe0:ahc0:0:0:2): SCB 0x6 - timed out while idle, LASTPHASE == 0x1, SEQADDR
== 0x18c
(probe0:ahc0:0:0:2): no longer in timeout, status = 34b
ahc0: target 0 using 8bit transfers
ahc0: target 0 using asynchronous transfers
ahc0: Issued Channel A Bus Reset. 2 SCBs aborted
(probe0:ahc0:0:0:2): SCB 0x4 - timed out while idle, LASTPHASE == 0x1, SEQADDR
== 0x18c
(probe0:ahc0:0:0:2): Queuing a BDR SCB
(probe0:ahc0:0:0:2): SCB 0x4 - timed out while idle, LASTPHASE == 0x1, SEQADDR
== 0x18c
(probe0:ahc0:0:0:2): no longer in timeout, status = 34b
ahc0: Issued Channel A Bus Reset. 2 SCBs aborted
(probe1:ahc0:0:6:6): SCB 0x4 - timed out while idle, LASTPHASE == 0x1, SEQADDR
== 0x18c
(probe1:ahc0:0:6:6): Queuing a BDR SCB
(probe1:ahc0:0:6:6): SCB 0x4 - timed out while idle, LASTPHASE == 0x1, SEQADDR
== 0x18c
(probe1:ahc0:0:6:6): no longer in timeout, status = 34b
ahc0: Issued Channel A Bus Reset. 2 SCBs aborted
(probe0:ahc0:0:0:2): SCB 0x4 - timed out while idle, LASTPHASE == 0x1, SEQADDR
== 0x18c
(probe0:ahc0:0:0:2): Queuing a BDR SCB
(probe0:ahc0:0:0:2): SCB 0x4 - timed out while idle, LASTPHASE == 0x1, SEQADDR
== 0x18c
(probe0:ahc0:0:0:2): no longer in timeout, status = 34b
ahc0: Issued Channel A Bus Reset. 2 SCBs aborted
(probe1:ahc0:0:6:6): SCB 0x4 - timed out while idle, LASTPHASE == 0x1, SEQADDR
== 0x18c
(probe1:ahc0:0:6:6): Queuing a BDR SCB
(probe1:ahc0:0:6:6): SCB 0x4 - timed out while idle, LASTPHASE == 0x1, SEQADDR
== 0x18c
(probe1:ahc0:0:6:6): no longer in timeout, status = 34b
ahc0: Issued Channel A Bus Reset. 2 SCBs aborted
(probe0:ahc0:0:0:2): SCB 0x4 - timed out while idle, LASTPHASE == 0x1, SEQADDR
== 0x18c
(probe0:ahc0:0:0:2): Queuing a BDR SCB
(probe0:ahc0:0:0:2): SCB 0x4 - timed out while idle, LASTPHASE == 0x1, SEQADDR
== 0x18c
(probe0:ahc0:0:0:2): no longer in timeout, status = 34b
ahc0: Issued Channel A Bus Reset. 2 SCBs aborted
(probe1:ahc0:0:6:6): SCB 0x4 - timed out while idle, LASTPHASE == 0x1, SEQADDR
== 0x18c
(probe1:ahc0:0:6:6): Queuing a BDR SCB
(probe1:ahc0:0:6:6): SCB 0x4 - timed out while idle, LASTPHASE == 0x1, SEQADDR
== 0x18c
(probe1:ahc0:0:6:6): no longer in timeout, status = 34b
ahc0: Issued Channel A Bus Reset. 2 SCBs aborted
(probe0:ahc0:0:0:2): SCB 0x4 - timed out while idle, LASTPHASE == 0x1, SEQADDR
== 0x18c
(probe0:ahc0:0:0:2): Queuing a BDR SCB
(probe0:ahc0:0:0:2): SCB 0x4 - timed out while idle, LASTPHASE == 0x1, SEQADDR
== 0x18c
(probe0:ahc0:0:0:2): no longer in timeout, status = 34b
ahc0: Issued Channel A Bus Reset. 2 SCBs aborted
(probe1:ahc0:0:6:6): SCB 0x4 - timed out while idle, LASTPHASE == 0x1, SEQADDR
== 0x18c
(probe1:ahc0:0:6:6): Queuing a BDR SCB
(probe1:ahc0:0:6:6): SCB 0x4 - timed out while idle, LASTPHASE == 0x1, SEQADDR
== 0x18c
(probe1:ahc0:0:6:6): no longer in timeout, status = 34b
ahc0: Issued Channel A Bus Reset. 2 SCBs aborted
(probe0:ahc0:0:0:3): SCB 0x4 - timed out while idle, LASTPHASE == 0x1, SEQADDR
== 0x18c
(probe0:ahc0:0:0:3): Queuing a BDR SCB
(probe0:ahc0:0:0:3): SCB 0x4 - timed out while idle, LASTPHASE == 0x1, SEQADDR
== 0x18c
(probe0:ahc0:0:0:3): no longer in timeout, status = 34b
ahc0: Issued Channel A Bus Reset. 2 SCBs aborted
(probe1:ahc0:0:6:7): SCB 0x4 - timed out while idle, LASTPHASE == 0x1, SEQADDR
== 0x18c
(probe1:ahc0:0:6:7): Queuing a BDR SCB
(probe1:ahc0:0:6:7): SCB 0x4 - timed out while idle, LASTPHASE == 0x1, SEQADDR
== 0x18c
(probe1:ahc0:0:6:7): no longer in timeout, status = 34b
ahc0: Issued Channel A Bus Reset. 2 SCBs aborted
(probe0:ahc0:0:0:3): SCB 0x4 - timed out while idle, LASTPHASE == 0x1, SEQADDR
== 0x18c
(probe0:ahc0:0:0:3): Queuing a BDR SCB
(probe0:ahc0:0:0:3): SCB 0x4 - timed out while idle, LASTPHASE == 0x1, SEQADDR
== 0x18c
(probe0:ahc0:0:0:3): no longer in timeout, status = 34b
ahc0: Issued Channel A Bus Reset. 2 SCBs aborted
(probe1:ahc0:0:6:7): SCB 0x4 - timed out while idle, LASTPHASE == 0x1, SEQADDR
== 0x18c
(probe1:ahc0:0:6:7): Queuing a BDR SCB
(probe1:ahc0:0:6:7): SCB 0x4 - timed out while idle, LASTPHASE == 0x1, SEQADDR
== 0x18c
(probe1:ahc0:0:6:7): no longer in timeout, status = 34b
ahc0: Issued Channel A Bus Reset. 2 SCBs aborted
ahc0: target 0 using 16bit transfers
ahc0: target 0 synchronous at 10.0MHz, offset = 0x8
(probe0:ahc0:0:0:3): SCB 0x4 - timed out while idle, LASTPHASE == 0x1, SEQADDR
== 0x18c
(probe0:ahc0:0:0:3): Queuing a BDR SCB
(probe0:ahc0:0:0:3): SCB 0x4 - timed out while idle, LASTPHASE == 0x1, SEQADDR
== 0x18c
(probe0:ahc0:0:0:3): no longer in timeout, status = 34b
ahc0: target 0 using 8bit transfers
ahc0: target 0 using asynchronous transfers
ahc0: Issued Channel A Bus Reset. 2 SCBs aborted
(probe0:ahc0:0:0:3): SCB 0x6 - timed out while idle, LASTPHASE == 0x1, SEQADDR
== 0x18c
(probe0:ahc0:0:0:3): Queuing a BDR SCB
(probe0:ahc0:0:0:3): SCB 0x6 - timed out while idle, LASTPHASE == 0x1, SEQADDR
== 0x18c
(probe0:ahc0:0:0:3): no longer in timeout, status = 34b
ahc0: Issued Channel A Bus Reset. 2 SCBs aborted
(probe1:ahc0:0:6:7): SCB 0x6 - timed out while idle, LASTPHASE == 0x1, SEQADDR
== 0x18c
(probe1:ahc0:0:6:7): Queuing a BDR SCB
(probe1:ahc0:0:6:7): SCB 0x6 - timed out while idle, LASTPHASE == 0x1, SEQADDR
== 0x18c
(probe1:ahc0:0:6:7): no longer in timeout, status = 34b
ahc0: Issued Channel A Bus Reset. 2 SCBs aborted
(probe0:ahc0:0:0:3): SCB 0x6 - timed out while idle, LASTPHASE == 0x1, SEQADDR
== 0x18c
(probe0:ahc0:0:0:3): Queuing a BDR SCB
(probe0:ahc0:0:0:3): SCB 0x6 - timed out while idle, LASTPHASE == 0x1, SEQADDR
== 0x18c
(probe0:ahc0:0:0:3): no longer in timeout, status = 34b
ahc0: Issued Channel A Bus Reset. 2 SCBs aborted
(probe1:ahc0:0:6:7): SCB 0x6 - timed out while idle, LASTPHASE == 0x1, SEQADDR
== 0x18c
(probe1:ahc0:0:6:7): Queuing a BDR SCB
(probe1:ahc0:0:6:7): SCB 0x6 - timed out while idle, LASTPHASE == 0x1, SEQADDR
== 0x18c
(probe1:ahc0:0:6:7): no longer in timeout, status = 34b
ahc0: Issued Channel A Bus Reset. 2 SCBs aborted
(probe0:ahc0:0:0:4): SCB 0x6 - timed out while idle, LASTPHASE == 0x1, SEQADDR
== 0x18c
(probe0:ahc0:0:0:4): Queuing a BDR SCB
(probe0:ahc0:0:0:4): SCB 0x6 - timed out while idle, LASTPHASE == 0x1, SEQADDR
== 0x18c
(probe0:ahc0:0:0:4): no longer in timeout, status = 34b
ahc0: Issued Channel A Bus Reset. 2 SCBs aborted
(probe1:ahc0:0:6:7): SCB 0x6 - timed out while idle, LASTPHASE == 0x1, SEQADDR
== 0x18c
(probe1:ahc0:0:6:7): Queuing a BDR SCB
(probe1:ahc0:0:6:7): SCB 0x6 - timed out while idle, LASTPHASE == 0x1, SEQADDR
== 0x18c
(probe1:ahc0:0:6:7): no longer in timeout, status = 34b
ahc0: Issued Channel A Bus Reset. 2 SCBs aborted
(probe0:ahc0:0:0:4): SCB 0x6 - timed out while idle, LASTPHASE == 0x1, SEQADDR
== 0x18c
(probe0:ahc0:0:0:4): Queuing a BDR SCB
(probe0:ahc0:0:0:4): SCB 0x6 - timed out while idle, LASTPHASE == 0x1, SEQADDR
== 0x18c
(probe0:ahc0:0:0:4): no longer in timeout, status = 34b
ahc0: Issued Channel A Bus Reset. 1 SCBs aborted
ahc0: target 0 using 16bit transfers
ahc0: target 0 synchronous at 10.0MHz, offset = 0x8
(probe0:ahc0:0:0:5): SCB 0x6 - timed out while idle, LASTPHASE == 0x1, SEQADDR
== 0x18c
(probe0:ahc0:0:0:5): Queuing a BDR SCB
(probe0:ahc0:0:0:5): SCB 0x6 - timed out while idle, LASTPHASE == 0x1, SEQADDR
== 0x18c
(probe0:ahc0:0:0:5): no longer in timeout, status = 34b
ahc0: target 0 using 8bit transfers
ahc0: target 0 using asynchronous transfers
ahc0: Issued Channel A Bus Reset. 1 SCBs aborted
(probe0:ahc0:0:0:5): SCB 0x6 - timed out while idle, LASTPHASE == 0x1, SEQADDR
== 0x18c
(probe0:ahc0:0:0:5): Queuing a BDR SCB
(probe0:ahc0:0:0:5): SCB 0x6 - timed out while idle, LASTPHASE == 0x1, SEQADDR
== 0x18c
(probe0:ahc0:0:0:5): no longer in timeout, status = 34b
ahc0: Issued Channel A Bus Reset. 1 SCBs aborted
(probe0:ahc0:0:0:5): SCB 0x6 - timed out while idle, LASTPHASE == 0x1, SEQADDR
== 0x18c
(probe0:ahc0:0:0:5): Queuing a BDR SCB
(probe0:ahc0:0:0:5): SCB 0x6 - timed out while idle, LASTPHASE == 0x1, SEQADDR
== 0x18c
(probe0:ahc0:0:0:5): no longer in timeout, status = 34b
ahc0: Issued Channel A Bus Reset. 1 SCBs aborted
(probe0:ahc0:0:0:5): SCB 0x6 - timed out while idle, LASTPHASE == 0x1, SEQADDR
== 0x18c
(probe0:ahc0:0:0:5): Queuing a BDR SCB
(probe0:ahc0:0:0:5): SCB 0x6 - timed out while idle, LASTPHASE == 0x1, SEQADDR
== 0x18c
(probe0:ahc0:0:0:5): no longer in timeout, status = 34b
ahc0: Issued Channel A Bus Reset. 1 SCBs aborted
(probe0:ahc0:0:0:5): SCB 0x6 - timed out while idle, LASTPHASE == 0x1, SEQADDR
== 0x18c
(probe0:ahc0:0:0:5): Queuing a BDR SCB
(probe0:ahc0:0:0:5): SCB 0x6 - timed out while idle, LASTPHASE == 0x1, SEQADDR
== 0x18c
(probe0:ahc0:0:0:5): no longer in timeout, status = 34b
ahc0: Issued Channel A Bus Reset. 1 SCBs aborted
(probe0:ahc0:0:0:6): SCB 0x6 - timed out while idle, LASTPHASE == 0x1, SEQADDR
== 0x18c
(probe0:ahc0:0:0:6): Queuing a BDR SCB
(probe0:ahc0:0:0:6): SCB 0x6 - timed out while idle, LASTPHASE == 0x1, SEQADDR
== 0x18c
(probe0:ahc0:0:0:6): no longer in timeout, status = 34b
ahc0: Issued Channel A Bus Reset. 1 SCBs aborted
(probe0:ahc0:0:0:6): SCB 0x6 - timed out while idle, LASTPHASE == 0x1, SEQADDR
== 0x18c
(probe0:ahc0:0:0:6): Queuing a BDR SCB
(probe0:ahc0:0:0:6): SCB 0x6 - timed out while idle, LASTPHASE == 0x1, SEQADDR
== 0x18c
(probe0:ahc0:0:0:6): no longer in timeout, status = 34b
ahc0: Issued Channel A Bus Reset. 1 SCBs aborted
(probe0:ahc0:0:0:6): SCB 0x6 - timed out while idle, LASTPHASE == 0x1, SEQADDR
== 0x18c
(probe0:ahc0:0:0:6): Queuing a BDR SCB
(probe0:ahc0:0:0:6): SCB 0x6 - timed out while idle, LASTPHASE == 0x1, SEQADDR
== 0x18c
(probe0:ahc0:0:0:6): no longer in timeout, status = 34b
ahc0: Issued Channel A Bus Reset. 1 SCBs aborted
(probe0:ahc0:0:0:6): SCB 0x6 - timed out while idle, LASTPHASE == 0x1, SEQADDR
== 0x18c
(probe0:ahc0:0:0:6): Queuing a BDR SCB
(probe0:ahc0:0:0:6): SCB 0x6 - timed out while idle, LASTPHASE == 0x1, SEQADDR
== 0x18c
(probe0:ahc0:0:0:6): no longer in timeout, status = 34b
ahc0: Issued Channel A Bus Reset. 1 SCBs aborted
(probe0:ahc0:0:0:6): SCB 0x6 - timed out while idle, LASTPHASE == 0x1, SEQADDR
== 0x18c
(probe0:ahc0:0:0:6): Queuing a BDR SCB
(probe0:ahc0:0:0:6): SCB 0x6 - timed out while idle, LASTPHASE == 0x1, SEQADDR
== 0x18c
(probe0:ahc0:0:0:6): no longer in timeout, status = 34b
ahc0: Issued Channel A Bus Reset. 1 SCBs aborted
(probe0:ahc0:0:0:7): SCB 0x6 - timed out while idle, LASTPHASE == 0x1, SEQADDR
== 0x18c
(probe0:ahc0:0:0:7): Queuing a BDR SCB
(probe0:ahc0:0:0:7): SCB 0x6 - timed out while idle, LASTPHASE == 0x1, SEQADDR
== 0x18c
(probe0:ahc0:0:0:7): no longer in timeout, status = 34b
ahc0: Issued Channel A Bus Reset. 1 SCBs aborted
(probe0:ahc0:0:0:7): SCB 0x6 - timed out while idle, LASTPHASE == 0x1, SEQADDR
== 0x18c
(probe0:ahc0:0:0:7): Queuing a BDR SCB
(probe0:ahc0:0:0:7): SCB 0x6 - timed out while idle, LASTPHASE == 0x1, SEQADDR
== 0x18c
(probe0:ahc0:0:0:7): no longer in timeout, status = 34b
ahc0: Issued Channel A Bus Reset. 1 SCBs aborted
(probe0:ahc0:0:0:7): SCB 0x6 - timed out while idle, LASTPHASE == 0x1, SEQADDR
== 0x18c
(probe0:ahc0:0:0:7): Queuing a BDR SCB
(probe0:ahc0:0:0:7): SCB 0x6 - timed out while idle, LASTPHASE == 0x1, SEQADDR
== 0x18c
(probe0:ahc0:0:0:7): no longer in timeout, status = 34b
ahc0: Issued Channel A Bus Reset. 1 SCBs aborted
ahc0: target 0 using 16bit transfers
ahc0: target 0 synchronous at 10.0MHz, offset = 0x8
pass0 at ahc0 bus 0 target 0 lun 0
pass0: <SEAGATE ST34573W 6244> Fixed Direct Access SCSI-2 device
pass0: 20.000MB/s transfers (10.000MHz, offset 8, 16bit), Tagged Queueing
Enabled
pass1 at ahc0 bus 0 target 6 lun 0
pass1: <TOSHIBA CD-ROM XM-6201TA 1037> Removable CD-ROM SCSI-2 device
pass1: 3.300MB/s transfers
Considering MFS root f/s.
changing root device to fd0c
rootfs is 2880 Kbyte compiled in MFS
/stand/sysinstall running as init on serial console
These are the predefined terminal types available to
sysinstall when running stand-alone. Please choose the
closest match for your particular terminal.
1 ...................... Standard ANSI terminal.
2 ...................... VT100 or compatible terminal.
3 ...................... FreeBSD system console (color).
4 ...................... FreeBSD system console (monochrome).
Your choice: (1-4) (da0:ahc0:0:0:0): SCB 0x6 - timed out while idle, LASTPHASE
== 0x1, SEQADDR == 0x18c
(da0:ahc0:0:0:0): Queuing a BDR SCB
(da0:ahc0:0:0:0): SCB 0x6 - timed out while idle, LASTPHASE == 0x1, SEQADDR ==
0x18c
(da0:ahc0:0:0:0): no longer in timeout, status = 34b
ahc0: target 0 using 8bit transfers
ahc0: target 0 using asynchronous transfers
ahc0: Issued Channel A Bus Reset. 2 SCBs aborted
(da0:ahc0:0:0:0): SCB 0x4 - timed out while idle, LASTPHASE == 0x1, SEQADDR ==
0x18c
(da0:ahc0:0:0:0): SCB 4: Immediate reset. Flags = 0x4040
(da0:ahc0:0:0:0): no longer in timeout, status = 34b
ahc0: Issued Channel A Bus Reset. 2 SCBs aborted
(da0:ahc0:0:0:0): SCB 0x6 - timed out while idle, LASTPHASE == 0x1, SEQADDR ==
0x18c
(da0:ahc0:0:0:0): Queuing a BDR SCB
(da0:ahc0:0:0:0): SCB 0x6 - timed out while idle, LASTPHASE == 0x1, SEQADDR ==
0x18c
(da0:ahc0:0:0:0): no longer in timeout, status = 34b
ahc0: Issued Channel A Bus Reset. 2 SCBs aborted
(da0:ahc0:0:0:0): SCB 0x4 - timed out while idle, LASTPHASE == 0x1, SEQADDR ==
0x18c
(da0:ahc0:0:0:0): SCB 4: Immediate reset. Flags = 0x4040
(da0:ahc0:0:0:0): no longer in timeout, status = 34b
ahc0: Issued Channel A Bus Reset. 2 SCBs aborted
ahc0: target 0 using 16bit transfers
ahc0: target 0 synchronous at 10.0MHz, offset = 0x8
(da0:ahc0:0:0:0): SCB 0x6 - timed out while idle, LASTPHASE == 0x1, SEQADDR ==
0x18c
(da0:ahc0:0:0:0): Queuing a BDR SCB
(da0:ahc0:0:0:0): SCB 0x6 - timed out while idle, LASTPHASE == 0x1, SEQADDR ==
0x18c
(da0:ahc0:0:0:0): no longer in timeout, status = 34b
ahc0: target 0 using 8bit transfers
ahc0: target 0 using asynchronous transfers
ahc0: Issued Channel A Bus Reset. 2 SCBs aborted
(da0:ahc0:0:0:0): got CAM status 0x14b
(da0:ahc0:0:0:0): fatal error, failed to attach to device
(da0:ahc0:0:0:0): lost device
(da0:ahc0:0:0:0): removing device entry
(cd0:ahc0:0:6:0): SCB 0x4 - timed out while idle, LASTPHASE == 0x1, SEQADDR ==
0x18c
(cd0:ahc0:0:6:0): Queuing a BDR SCB
(cd0:ahc0:0:6:0): SCB 0x4 - timed out while idle, LASTPHASE == 0x1, SEQADDR ==
0x18c
(cd0:ahc0:0:6:0): no longer in timeout, status = 34b
ahc0: Issued Channel A Bus Reset. 1 SCBs aborted
(cd0:ahc0:0:6:0): SCB 0x4 - timed out while idle, LASTPHASE == 0x1, SEQADDR ==
0x18c
(cd0:ahc0:0:6:0): Queuing a BDR SCB
(cd0:ahc0:0:6:0): SCB 0x4 - timed out while idle, LASTPHASE == 0x1, SEQADDR ==
0x18c
(cd0:ahc0:0:6:0): no longer in timeout, status = 34b
ahc0: Issued Channel A Bus Reset. 1 SCBs aborted
(cd0:ahc0:0:6:0): got CAM status 0x14b
(cd0:ahc0:0:6:0): fatal error, failed to attach to device
(cd0:ahc0:0:6:0): lost device
(cd0:ahc0:0:6:0): removing device entry
Invalid choice, please try again.
These are the predefined terminal types available to
sysinstall when running stand-alone. Please choose the
closest match for your particular terminal.
1 ...................... Standard ANSI terminal.
2 ...................... VT100 or compatible terminal.
3 ...................... FreeBSD system console (color).
4 ...................... FreeBSD system console (monochrome).
Your choice: (1-4)
Invalid choice, please try again.
These are the predefined terminal types available to
sysinstall when running stand-alone. Please choose the
closest match for your particular terminal.
1 ...................... Standard ANSI terminal.
2 ...................... VT100 or compatible terminal.
3 ...................... FreeBSD system console (color).
4 ...................... FreeBSD system console (monochrome).
Your choice: (1-4)
--==_Exmh_16937519200--
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-scsi" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?79487.920670858>