Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 23 Nov 2006 17:31:56 -0800
From:      David Sharp <daimon@dev-random.org>
To:        "M. Warner Losh" <imp@bsdimp.com>
Cc:        freebsd-arm@freebsd.org
Subject:   Re: Question about "make trampoline" on FreeBSD
Message-ID:  <20061124013156.GI2324@mail.secure.net>
In-Reply-To: <20061123.175756.-1398301896.imp@bsdimp.com>
References:  <b2ec5cad0611230629r5db3ac81k565068449d13b090@mail.gmail.com> <20061124002310.GA2324@mail.secure.net> <20061123.175756.-1398301896.imp@bsdimp.com>

next in thread | previous in thread | raw e-mail | index | archive | help
On 2006.11.23 17:57:56 +0000, M. Warner Losh wrote:
> SD root isn't that slow.  I get from power on to login prompt in 1
> minute on the machines at work as well as the KB9202 boards.  Over NFS
> root it takes about the same amount of time.  Maybe there's something
> weird in your setup...

NFS is quite a bit faster than SD for me, so as you suggest my hw is
prolly broken.  i think i got all the pullups in the right place.  it
has not failed to load but is just slow to read/write.  perhaps 
another sd card might fix things.  are the ...bus width to 1 messages
normal?

Timecounter "AT91RM9200 timer" frequency 32768 Hz quality 1000
Timecounters tick every 7.812 msec
at91_mci0: Setting controller bus width to 1
at91_mci0: Setting controller bus width to 1
at91_mci0: Setting controller bus width to 1
at91_mci0: Setting controller bus width to 1
at91_mci0: Setting controller bus width to 1
at91_mci0: Setting controller bus width to 1
SD CARD: 500695040 bytes
at91_mci0: Setting controller bus width to 1
mmcsd0: <mmc or sd flash card> on mmc0
mmc0: setting transfer rate to 30.000MHz
at91_mci0: Setting controller bus width to 1
Trying to mount root from ufs:mmcsd0s1a






Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20061124013156.GI2324>